Change of site for Ironport

if I have an Ironport in the U.S. with active smarnet support and desire to bring him to Colombia, that I make stand still active in the new country and if this means paying additional value due to changes in site and within the portal Cisco I see the new site.

Sure thing!
So, the website's address is:
1) www.newtpoint.co.uk
When navigated to, it used to go to:
2) http://www.newtpoint.co.uk/Newt_Point_-_updates_sometimes/latest.html
Which now comes up as 404, because I changed it to:
3) http://www.newtpoint.co.uk/webcomic/Newt_Point.html
When visiting 3) it comes up fine, but going to 1) attempts to navigate to 2), which is no good, because it no longer exists. 3) represents the first page in iWeb; i.e.
But it still messes up and goes to the 404. I've looked on the FTP area and everything seems fine, but it's still doing it.
Thanks,
Jimbo

Similar Messages

Error 1006 - Changing Ad Site for subnet where exchange 2013 servers was setup

We wanted to change Ad site for subnet where exchange 2013 servers was setup.
When we do that error id 1006 appear on 2 MBX Servers :
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: Database02
Error: An attempt to logon cross-site for Mdb 'xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx' was prevented to Server 'yyyyyyyy-yyyy-yyyy-yyyy-yyyyyyyyyyyy' in Site 'DomainAAA/Configuration/Sites/SiteB'. Local site is 'DomainAAA/Configuration/Sites/SiteA'.
DomainAAA - Our Domain
SiteA - AD site which temporarily cover subnet A and Subnet B
In subnet A are installed 2 DCs (Global Catalog) and other aplication servers.
In subnet B are installed all EX2013 servers (2 MBX and 2x CAS) ,1 DC (Global Catalog) and other app servers.
SiteB - new created AD site intended for subnet B
These subnets are on diferent physical location.
When we change Ad site for subnetB from the AD siteA to AD SiteB, above error appear.
There is a object ExchEdgeSyncService under the AD site : SiteA , where the installation EX2013 was done.
So do We need to create the new edgesyncservice under the siteB ?
What steps do we have to make ?
Our intention is to eventually remove all servers from the siteA and move to to SiteB.
So that siteA will no longer exist.
Thanks in advance , and sorry for bad english.
Best regards

Hi,
Why don't you just extend the VLAN so you don't have to create another site and do changes so much
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.
Krisna Ismayanto | My blogs: Krisna Ismayanto | Twitter:
@ikrisna

How do I adjust the HTTP server receive timeout for one site on Ironport S670

Hi All,
How do I adjust the HTTP server receive timeout for one site on Ironport S670?A web based application can take a long time (45 to 60 minutes) to fill a form once a user Login.The proxy will timeout the connection before the result comes back.How do I resolve the issue?
Thanks

Sandeep,
There is no option to adjust timers for one specific website. Any changes will affect all websites. The setting is under Security Services > Web Proxy. If only one site is being problematic for you, I'd recommend you consider bypassing it.
Is this an HTTPS site?
You may want to open a TAC case and have them take a deeper look into this.
-Vance

How can I change one color in design on a web site for exemple background : white to light-brown?

1. how can I change one color in design on a web site for exemple background : white to light-brown?
2. how can I edit visual bookmark on the beginning page?

This doesn't sound like a Firefox issue. I think you'd be better off with a site that offers web design tutorials. Try this one: http://www.w3schools.com/
One thing you should do though and that is to update Firefox via Help | Check For Updates.
There was a security breach at Comodo which is an SSL certificate provider recently whereby a number of fraudulent certificates were inadvertently issued. These allow a hacker to impersonate any site including online banking and the Firefox version you're running at the moment will not warn you that the site is a fake. The fraudulent certificates were blacklisted in v3.6.17 and beyond.
See also: http://blogs.comodo.com/it-security/data-security/the-recent-ra-compromise/

How do I change a font for a specific widget and not my whole site?

I recently added an affiliate link to my site, and the widget they provided is referencing my CSS text style sheet.
type="text/javascript"
The problem is that the text on my site is white, and the search box in the affiliate box is white, so you don't see anything in the text box unless you highlight the text. I changed the font color on the affiliate widget on their site, but it still comes up white.
I did see a discussion where they suggested changing the font family, which may be a start. I'm wondering though how can I change the style for just this one reference and not my whole site without changing the code I was provided from the affiliate. Perhaps I need to add something to my style.css?
Thanks!

You might try inline CSS styles in your widget HTML code but without seeing your page, it's impossible to be more specific.
Nancy O.

Change default language for SharePoint Online Sub-Site

Hi Guys,
Am trying to create multiple sub-sites using a custom site template in SharePoint Online. The default language of the Site Template is English. But I want to create sites for difference languages.
There is a option to setup multiple languages on the site and change the browser preferences. But we want that anyone irrespective of the language, should see the site in the language it has been configured for, For instance France site should display data
in French irrespective of any user see it.
To accomplish this, I was trying to find if there is a way to change the default language of the site after we create it.
Can some one give me an idea if we can achieve this behavior or if there an alternate to do it ?
Thanks,
Nutan
Nutan Sharma

Hi,
According to your post, my understanding is that you want to change the default site language.
There is no supported way to change the default language of a site collection, once it has been created.
There is a way to change it by modifying the content database using SQL Management Studio(though it is not supported), you can refer to the article below to change the default language in an existed site.
http://sharepointchick.com/archive/2008/04/29/changing-the-language-of-an-existing-sharepoint-site.aspx
Thanks,
Jason
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Jason Guo
TechNet Community Support

How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

How do I get my iphone to remember a different password in safari when I change a password for a secure site that was already changed

Click here and use Apple's iForgot service; if it doesn't work, contact Apple.
(120917)

I cant turn on the coockies when i go to the tools --- options--- privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

i cant turn on the coockies when i go to the tools --->options--->privacy and choose use custom sitting for history and click OK. Then o go back nothing changed

Note that the "Use custom settings for history" selection allows to see the current history and cookie settings, but selecting this doesn't make any changes to history and cookie settings.<br />
Firefox shows the "Use custom settings for history" selection as an indication that at least one of the history and cookie settings is not the default to make you aware that changes were made.<br />
If all History settings are default then the custom settings are hidden and you see "Firefox will: (Never) Remember History" (Never remember history means that Private Browsing mode is active).
"Use custom settings for history" stays selected if at least one of the History or Cookie settings is not the default to make you aware that changes from the defaults are made.
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
If you do not keep changes after a restart then see:
*http://kb.mozillazine.org/Preferences_not_saved

Need help writing script to change version control for all document libraries in all sites

Hello,
I found this script, http://get-spscripts.com/2010/10/changing-sharepoint-list-settings-using.html that
changes versions control for a document library. However, many sites have many document libraries with different names. The script below just changes a the settings to a document library that is named "Shared Documents", but does not
change one if its named something else. How can change the script to loop through all document libraries so their settings are changed?
$site = Get-SPSite http://site
$listName = "Shared Documents"
#Walk through each site in the site collection
$site | Get-SPWeb |
ForEach-Object {
#Get the list in this site
$list = $_.Lists[$listName]
#Create a version each time you edit an item in this list (lists)
#Create major versions (document libraries)
$list.EnableVersioning = $true
#Create major and minor (draft) versions (document libraries only)
$list.EnableMinorVersions = $true
#Keep the following number of versions (lists)
#Keep the following number of major versions (document libraries)
$list.MajorVersionLimit = 7
#Keep drafts for the following number of approved versions (lists)
#Keep drafts for the following number of major versions (document libraries)
$list.MajorWithMinorVersionsLimit = 5
#Update the list
$list.Update()
#Dispose of the site object
$site.Dispose()
Paul

Sorry, I agree. It will update Style Library and other out of the box ones. Include the library titles in a collection and run the update against them provided these libraries are common across all sites. If not, you will have to first get an extract of
all such libraries in all sites say in a CSV file and then update the script below to refer to the CSV records.
Add-PSSnapin "Microsoft.SharePoint.PowerShell" -ErrorAction Stop;
#List of Libraries to be updated.
$Libraries = @("Shared Documents","My Document Library");
$spAssgn = Start-SPAssignment;
$site = Get-SPSite http://site -AssignmentCollection $spAssgn
#Walk through each site in the site collection
$site | Get-SPWeb -Limit ALL -AssignmentCollection $spAssgn |
ForEach-Object {
#Enumerate through all document libraries
$_.Lists|Where{$_.BaseTemplate -eq "DocumentLibrary" -and $Libraries -contains $_.Title}|Foreach-Object{
#Get the list in this site
$list = $_;
#Create a version each time you edit an item in this list (lists)
#Create major versions (document libraries)
$list.EnableVersioning = $true
#Create major and minor (draft) versions (document libraries only)
$list.EnableMinorVersions = $true
#Keep the following number of versions (lists)
#Keep the following number of major versions (document libraries)
$list.MajorVersionLimit = 7
#Keep drafts for the following number of approved versions (lists)
#Keep drafts for the following number of major versions (document libraries)
$list.MajorWithMinorVersionsLimit = 5
#Update the list
$list.Update()
Stop-SPAssignment $spAssgn;
This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

When I try to open live hot mail I get this message:The Windows Live Network is unavailable from this site for one of the following reasons:

When I try to open live hot mail I get this message: The Windows Live Network is unavailable from this site for one of the following reasons:
* This site may be experiencing a problem
* The site may not be a member of the Windows Live Network
You can:
* You can sign in or sign up at other sites on the Windows Live Network, or try again later at this site.
However, when I open hot mail in IE it opens just fine. Tried changing the password as suggested but it did not help in Firefox.

Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"

I'm trying to get a style switcher going for my site(for the colour scheme)

I'd like to give my users the choice of changing the colour
scheme of my site (
http://chaoscoalition.net) at
will, through css style changing buttons such as the ones on the
forum's theme(
http://forum.chaoscoalition.net).
I've read many articles and tutorials on how to set up
alternate stylesheets for a webpage, but I can't quite get it
right. Every time I seem to have gotten it right, it either opens
the php file that sets the cookie, or it opens the stylesheet as
text. I want to end up with something like the forum's theme
changing module, but for the homepage.
I have 5 different versions of the page made, all as
different pages(php format), but I don't understand how to link the
buttons at the top to trigger the stylesheet change, and I don't
even knwo if it's possible to rely on a css file to change the
whole colour scheme of the page(which is image based).
It'd be great if someone could walk me through this, or offer
some tutorial that explains how to do this from scratch.
Thank you.

First, never use Fireworks or any graphics app to build HTML and CSS for you. The resulting code is rigid, fragile and only good for quick comps or prototypes to show a client. Use DW to generate actual site code.
Secondly, external stylesheets must not contain JavaScripts or X/HTML code as your green.css does. Only CSS rules and comments are allowed inside external stylesheets - like so:
/**Green CSS**/
body {
     margin:0 auto;/**this centers page**/
     padding:0;
     width: 900px;
     font-family: arial, helvetica, sans-serif;
     color: white;
     background: green; /**this is green**/
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/

Implementing Sites for a new Single Domain Environment and effects on Exchange

Copied from the Active Directory forums as the suggestion of replies.
I didn't find exactly what I was looking for so decided to create my own question to get some direct feedback.
Currently we have a single domain environment with two domain controllers located at two separate sites. When the domain was first set up, no configuration was done in the Sites and Services module for Active Directory. The two domain controllers we have are
currently located in the Default-First-Site-Name container. We do not have any subnets configured with the Sites and Services module.
These two domain controllers are located at two different sites with different IP schemes and the sites are connected with a high speed site-to-site VPN. We also have 2 satellite offices with their own IP schemes as well with more offices to come. In the future
domain controllers will be placed at these satellite offices which are connected with a slower site-to-site VPN to the main offices.
All replication and network functions are working well now, but I would like to know what the effects would be and what to watch out for if I create sites for our environment. I am particularly concerned about our Exchange 2010 server and need to make sure
that the change will not disrupt communications between it and the domain controllers.
I would like to create a site for each of our locations and link the subnet to that site now so that when we install the domain controllers the configuration is ready.
Any suggestions or input is highly appreciated thank you in advance.

Exchange will be an issue only if your Exchange servers span sites when your new Windows sites are created. If you have Exchange servers all in a single location, adding sites to your Windows forest will cause no issues. However, if you have
Exchange servers in both locations, as soon as a new site is defined for an Exchange server in a separate location from your other Exchange servers, you will start having issues. Let me give some examples so you can see what problems might occur:
Two datacenters, one Windows site, Exchange mailbox servers in both locations (primary and DR), but hub and CAS roles only in the primary datacenter:
In this situation, as soon as your second site is defined, the server in the DR datacenter will no longer be receiving mail - there is no hub to deliver it - and users will no longer be able to access their mailboxes - there is no CAS to support them.
Solution: Add hub and CAS to second datacenter and all is well with the world.
Two datacenters, one Windows site, Exchange multirole servers in both locations (primary and DR), but CAS Array defined:
Now we have a little bit better setup, since we have all roles in both locations. However, the CAS array in the primary site isn't going to be able to support your client connections in the DR site - so users will be connecting directly to the CAS
servers in the DR site (not optimum). Solution: Define a second CAS array for the DR site, with its own load balancer and configure the databases in your DR location to use that CAS array as the RPC Client Access Server.
There are other oddities, but as you can see, there will definitely be issues if your Exchange servers aren't all in the same location and you start defining Windows sites ...

Multiple sites for different geographic areas

i did a website for a letting agency in glasgow (
http://www.youlet.co.uk ) but
now the company has decided to open up an extra branch in
cambridge. iv optimised the original site and it appears in top 4
under certain optimised key phrases in msn and yahoo. iv been asked
to make a duplicate site for the cambridge office. now obviously
pages like the property search will have different content but more
informative pages like the home, about pages will be practicaly
identical other than changing all text references and keywords to
contain cambridge instead of glasgow.
so as not to mess with the ranking of the existing site, i
was going to put that whole site into a subdomain like
website/glasgow, do the same with the cambridge version then have
an index page on the main site linking off to the 2 sites.
what i wanted to ask was by doing this subdomain idea will
this allow each site to be treated as a site in its own right and
allow the glasgow veriosn to get back to where it was in the
rankings with it getting ignored as it is a subsdomain?
and also because the glasgow and cambridge sites will be
mostly identical apart from references to the location will this
count as being duplicate sites and count as spam?

Welcome to the Apple Discussions. When publishing multiple sites to to a MobileMe account the last published site will be accessible via the simple URL: http://web.me.com/youraccountname/
However each site has it's own URL which would be:
http://web.me.com/youraccount_name/sitename
So you need to tack on the site name at the end of the simple URL.
For what it's worth I use iWebSites to manage over 40 individual sites.. It lets me create multiple sites and multiple domain files.
If you have multiple sites in one domain file here's the workflow I used to split them into individual site files with iWebSites. Be sure to make a backup copy of your original Domain.sites files before starting the splitting process and move it to another location on your HD until you're satisfied the separation process is completed and what you want.
This lets me edit several sites and only republish the one I want. It's something you might want to take a look at.

I created a site for a client...

I designed a site for a guy who loved music, wanted to own a Hiphop News Site.
So I we talked about it for a day or so, and He insist that he pay everything upfront 100%
After about a 5 day wait, It was nearly done.
Looked good, but when I asked if he had any social networking ( Facebook, Twitter, Instagram account for the Hiphop News Site ) he told me he didn't want any.
So I pressed forward and got it done in three more days.
On the day it was done, He sent me a Facebook message and said " I want News, Music, Albums, Videos, and a Home page instead of the original five pages, and get it done by tomorrow " As I told him a whole new site change were to take at least a week, He stopped replying, but I sent it to him via email.
I messaged him over Facebook and asked him to chest his email, and he never replied.
I now have about two weeks worth of site work under my belt, A domain under my name ( Its in my list of domains I own ), A professional email account that Im paging out of my pocket for monthly, and still no word from the guy, AT ALL.
Id like to redo it to someone else's standards ( If you ask me its a pour site due to the guy being so simple and demanding, not wanting to do anything good with it ) and sell it to them, but Im not sure if I legally can.
If you were in my spot ( Considering you're a great guy / lady, I already know a lot of Adobe people who reply are actually AMAZING people! ) What would you do?

He could be on vacation, ill or worse. You don't know. If you're in a rush, send him a certified letter (return signature/receipt requested) with a reasonable deadline for project completion. After which you quit the project and stop paying for things like e-mail accounts, etc...
Nancy O.

How to change email routing in IronPort C360

Hi All,
I am new with IronPort. I would like to reconfigure my IronPort especially in its mail routing. The following are current and proposed config.
current config
Exchange <----> Mail antivirus Server <-----> IronPort <------> Internet <------> External user
Proposed Config
Exchange <-------> IronPort <-------> Internet <--------> External User
What parameter in Iron Port should i change to allow the proposed config running well?
Cheers,
Andi

Hi Tommy,
Let say we have the following existing config:
                            |-------- Servers
                            |
Exchange <----> Mail Anti VirusServer -<----> IronPort <-----> Internet ---- external usere
                            |
                            |<---------> Exchange (sister company exchange, different domain)
Proposed:
Exchange <-------> IronPort <-------> Internet <--------> External User
                             |
              Servers----|
* Beside the requirements i mentioned earlier, the mail antivirus server also serve mail flow to/from other sister company.
* The mail flow for sister company is: user --- exchange ---- mail anti virus server --- sister company. and also vice versa.
* Email from sistem company can only received from Mail Anti virus server, (IronPort after migration).
* Some servers inside relay email using Mail Antivirus server, and then will use Iron Port after migration.
Is there any additional change in the configof IronPort? Please advise.
Cheers,
Andi

Change of site for Ironport

Similar Messages

Maybe you are looking for