Change of standard Structure KOMG Error

Dear All
I have tried to add one extra field like MVGR1 (Material Group 1) in the KOMG structure. But it is showing an error as follows :
Foreign key KOMG-RKE_WWADV (RKE_WWADV and WWMDI point to different domains)
You assigned two fields from the dependent table and the check table to each other but they have different domains. A foreign key field, however, must have the same domain as the primary key field of the check table.
Change the domain of the field in the dependent table to the domain of the corresponding field in the check table.
Please help me.
Regards
Animesh

Hi,
The domain of MVGR1 and WWADV must be the same. Otherwise, a Foreign key relationship problem like the above exists.
For foreign key table and check table, the domain of the field which you refer must be the same in both the table.
Please, revert back for further clarification.
Best Regards,
Suresh

Similar Messages

  • Changing a standard structure erec_s_api_p5126.

    Is it ok to change a standard structure erec_s_api_p5126 . If not, can anybody tell how to create a new structure based on   erec_s_api_p5126. Or if I can, how can I change it.
    Thanks and Regards.
    Srinivas

    Hi,
    You can use append structure to add new fields (SE11) as per your requirement while you still can use standard structure EREC_S_API_P5126.
    If not, you can also copy the above structure via SE11 to ZEREC_S_API_P5126.
    Path: SE11 -> Select Database -> Enter EREC_S_API_P5126 -> Click on copy button (CTRL+F5) -> Give new structure name -> Click on continue -> ...
    Regards,
    Ferry Lianto

  • Error when activate standard structure

    Hi guru,
    i've a serious problem about the activation of a standard structure,the check (for error) pass without problem, but when I want to activate it there is this exception :
    CALL SCREEN (not modal) in modal dialog box not allowed
    Anybody can help me ?
    Thanks.
    Angelo.
    Edited by: Angelo Abbasci on Jan 13, 2009 2:52 PM

    HI,
    I try but cant do much as it is a standard structure..
    You could try to change the structure save it. The n execute the transaction again and try to activate..
    You added the field with Access Key or through Append structure..?
    If you get the error again then try and copy paste the error  report important parts..

  • Change the extractor structure in standard extractors?

    Hi, is it possible (and wise) to change the standard extraction structure on the standard extractors?

    Hi  Rune,
                    Yes you can change the standard extract structure for the standard datasources.You can write a code for enhancing extract structure in CMOD and you can add fields to the standard extract structure.For LO datasources you can customize the extract structure as well.You can do it in Extractor  maintainance and add fields from pool to extract structure.
    Hope this clears
    Regards
    Karthik

  • Why it returns ERROR after I changed some Standard Reports output to XML?

    Our EBS is a 11.5.10 CU2 instance.
    We just upgrated the XML Publisher to 5.6.1 and did all the work described in section "Post-install Steps" of "About Oracle XML Publisher 5.6.1"(Doc ID: Note:357308.1)
    Now we are do the testing.
    I changed the Standard Report "Journals - General (132 Char)" output type to XML, then ran it.
    It returns ERROR
    Logs is as flows:
    General Ledger: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    GLGENJRN module: Journals - General(132 Char)
    Current system time is 25-AUG-2006 11:39:25
    +-----------------------------
    | Starting concurrent program execution...
    +-----------------------------
    Arguments
    P_SET_OF_BOOKS_ID='1001'
    P_KIND='L'
    P_POSTING_STATUS='U'
    P_CURRENCY_CODE='CNY'
    P_PERIOD_NAME='AUG-06'
    P_PAGESIZE='132'
    XML_REPORTS_XENVIRONMENT is :
    /global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    XENVIRONMENT is set to /global/d01/applprod/oracle/prodora/8.0.6/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
    Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
    AMERICAN_AMERICA.UTF8
    REP-1401: 'beforereport': Fatal PL/SQL error occurred.
    ORA-06502: PL/SQL: numeric or value error
    Report Builder: Release 6.0.8.25.0 - Production on Fri Aug 25 11:39:26 2006
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    Enter Username:
    Start of log messages from FND_FILE
    End of log messages from FND_FILE
    Program exited with status 1
    Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 301650.
    Review your concurrent request log and/or report output file for more detailed information.
    Executing request completion options...
    Finished executing request completion options.
    Concurrent request completed
    Current system time is 25-AUG-2006 11:39:27
    Anybody know why?
    Thanks!

    Hi,
    The log file says that the RDF report actually errored out
    and its not a problem in XML Publisher.
    REP-1401: 'beforereport': Fatal PL/SQL error occurred.
    ORA-06502: PL/SQL: numeric or value error
    what you can do to debug is change the output type to text and run the report.
    See, if the report runs successfully. I guess, there might be some problem with the report itself.
    If the text report runs fine, change the output type to xml and run it.
    Hope it helps

  • How to Change S012  Table Structure ..?

    Hi MM Experts,
    How to copy and how to create new structure  and new caracterstics and MAterial type from  table S012 .
    T-code for execute MCE1 .
    How to Change S012  Table Structure ..?
    Regards,
    Anthyodaya.
    Edited by: anthyodaya Reddy Nagaram on Jul 7, 2010 12:44 PM

    Anthyodaya,
    Values?  Your newly created infostructure will have no data until you define how to update the underlying tables, and then execute the update.
    You need to be a bit more specific.  Are you saying that you attempted a 1-to-1 copy of S012 into a new structure, and you got a failure?  What failure?  What error message?  If you have saved your new infostructure, you can run the consistency utility to see what if anything is missing/misconfigured  MCSCHECK.
    If you have no experience with infostructures, I suggest you enlist the services of an experienced person to assist you.  Especially if you intend to implement non-standard characteristics and values, this can be a complex task.
    SAP help in this area
    Creating new IS
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/3754f7449a11d188fe0000e8322f96/frameset.htm
    Purchasing Info system
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/375504449a11d188fe0000e8322f96/frameset.htm
    Rgds,
    DB49

  • To change the warning message to error message in VA01.

    I want to change the warning message into error message in the standard VA01 transaction..
    The steps I follow :
    order type -->
    enter
    sold to part -->
    ship to party -->
    Purch order no -->
    Req deliv date -->
    Material -->
    Order quantity -->
    SU -->
    enter.
    The warning error dispayed is
    No add. vendor / customer data maint. for 16320340 - please maintain J_1IMOCUST...
    Want to change the above into error so that it shud not go further.

    Hi Arif,
    Click on Save  Icon.
      System will give information: No add. Vendor / Customer data maint. For INJ95C01 -Please maintain J_1IMOCUST.<b> Ignore it.</b>
    Result
    System will calculate Price of the Material creates Schedule Lines and saves the document. System will give a message: Standard Order has been saved.
    <b>**REWARD IF THIS HELPS WITH POINTS**</b>
    Regards
    AK

  • Change of Source Structure for Partial Settled WBS elements - CJ02

    Hi
    As per standard SAP, the change of source structure under settlement perameters of WBS element is not supported when the settlement of WBS element is done either partial / full.
    However, the client needs this change by doing any Z-Development as one time activity (since the source structure was changed for certain WBS elements as per change in business process).
    Can i Know procedure to do the Z development to modify the source structure for partial settled WBS elements and also let me know the any side effects in this regard.
    Regards
    Anil

    Hi Anil,
    I agree with Ajay. You can try to change it in Debugging mode.
    The values are handed over from include LCJWBF5Q (form project_settle_single using)      
    Some customer have also made a modification as a permanent solution.    
    Unfortunately in the standard it is not possible.
    regards Bernhard

  • Standard report s_ahr_61015512 .,., error

    When i run the standard report s_ahr_61015512 .,., error message (Unsolicited application group 0001 does not exist) is coming how can i clear this error

    SPRO
    Personnel Management u2013 Recruitment u2013IMG  Applicant Administration u2013 Applicant Structure u2013 Create Applicant Groups.
    Applicant group Applicant Group text Applicant class Applicant class text
    1 Active External AP External applicant
    2 Active internal P Internal applicant
    3 Student employee AP External applicant
    4 Temporary Worker AP External applicant
    Personnel Management u2013 Recruitment u2013 Applicant Administration u2013IMG  Applicant Structure u2013 Create Applicant Ranges.
    1 Trainee
    2 Salaried Employees
    3 Managerial Staff
    Personnel Management u2013 Recruitment u2013 Applicant Administration u2013IMG  Applicant Structure - Create Unsolicited Application Groups.
    Unsoli Appl Unsol ApplicationGroup Administrator Administrator Name
    001 Acounting dept. SCH Egon Schulz
    002 Sales & distribution MEI Hans Meier
    003 Personnel dept. MEI Hans Meier
    004 Development SCH Egon Schulz
    and assign NUAMP with applicant grp and ranges

  • Changes in Standard Table

    hi
        I want to change some fields in standard table like J_2IREGDOM.There it is asking access key but i have given my access key but getting an error like incorrect access key but it is correct one only. can anybody give the solution. Is there any other way to change the standard table?
    Is there any other access key for changing standard table.
    Regards
    Rami Reddy

    Hi,
      My sincere suggestion is dont change the standard table, instead you can create one custom table with your requirements. Any way if you want to make changes to standard table then you need to ask you basis guy about the object access key, the object access key for 'R3TR' 'TABL' <your table name>. Provide this object key to your basis person and ask for object access key.
    Rgds,
    Bujji

  • Changing the extract structure MC02M_0ITM

    Hi,
    When I am trying to change the extract structure MC02M_0ITM, I am getting the following error:
    "struct. from appl. 02 due to open v3 proc. not changed -> Long text" , "Message No. MCEX 140". All I was doing  was adding more fields from communication structure to extract structure and I am getting above error message. Can someone shed some light on that. Appreciate your help. Thanks.
    Wen.

    Hi Wen
    You have to
    1) Clear LBWQ Queues if you are using Queued delta
    2) Move all records from RSA7 - two times to BW under delta update call from BW - so that the records stored for repeat delta are also emptied
    3) Empty the statistical set-up table - LBWQ transaction in R/3
    then you can modify the structure in LO cockpit
    Arvind

  • Change the Standard ALV Export button text

    Hi Expert,
    I want to change the standard button ( Export Button ) text in ALV table. I had gone through some threads already but still i am not getting a clear idea on this. Could you please any one give me a clear structure on this.
    Regards,
    Sarathy.

    Here is the new solution with out creating ZCLASS.
    DATA: lo_function_dpwty       TYPE REF TO cl_prs_std_alv_funct,
            lr_functions            TYPE REF TO if_salv_wd_function_settings,
            lr_function_std         TYPE REF TO cl_salv_wd_a_function_std.
      CREATE OBJECT lo_function_dpwty
        EXPORTING
          id = 'X'.
      lr_functions = l_ref_interfacecontroller->get_model( ).
      " append row rename
      lr_function_std = lr_functions->get_function_std( if_salv_wd_c_std_functions=>edit_append_row ).
      lv_button_text = 'Add Item'.
      lo_function_dpwty->change_text( EXPORTING text        = lv_button_text
                                                           CHANGING  std_function  = lr_function_std ).
      "Delete row item rename
      lr_function_std = lr_functions->get_function_std( if_salv_wd_c_std_functions=>edit_delete_row ).
      lv_button_text = 'Delete Item'.
      lo_function_dpwty->change_text( EXPORTING text        = lv_button_text
                                                           CHANGING  std_function  = lr_function_std ).

  • Updating values in standard Structure

    Hi Everyone...
    How can i edit the values in a standard structure ....
    i have edited the value in standard table ANEP ( field nafab) ...
    but i want to change the values in structure FIAA_AW01_TRANS ...
    hw can i do that?
    Regards,
    Phani

    Hi Phani,
    Try the following sample code.
    loop at FIAA_AW01_TRANS.
      FIAA_AW01_TRANS-fieldX = 'SAMPLE'.
      modify FIAA_AW01_TRANS.
    endloop.
    lets assume that theres a field fieldX in the structure FIAA_AW01_TRANS.
    The value SAMPLE will be transferred to the structure at runtime.

  • Extend/Change the Standard Fiori App code

    Hi,
    We have implemented FIORI App in our SAP landscape.After implementation app is running fine.I want the change the standard FIORI App code for a specific app like change the label,change the Background Image,Change the Font style etc.I googled and made changes according to the article provided.
    Steps done to change the Standard app code.
    1)Downloaded the source code and uploaded in eclipse.
    2)Created a Extension Project and replaced the entire view with my new view.
    3)Shared the project and submitted the changes in gateway system.
    4)Created semantic object and other things required to show the custom app on launch pad.
    5)But when I click on custom app developed on the Launch pad it is navigating to a blank screen with no UI elements.But standard app is working fine.
    So please tell me the correct procedure to change the app and show it on Launch pad.
    Tags edited by: Michael Appleby

    Hi Ritesh,
    Following are the steps I followed in extending a Fiori App.
    I am trying to extend HCM_LR_APV(Approve Leave request ) app.
    So I downloaded HCM_LR_APV BSP Application.
    I uploaded in Eclipse IDE .I created an Extension Project(ZHCM_LR_APV) for this.
    For testing I tried to change the Icon in one of the view.
    So I replaced the S3 view by placing the Original Code same and changing the Icon only.
    In Component.js file I gave the path to the parent application in Load function.See the below code for your reference.
    jQuery.sap.declare("hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.Component");
    sap.ui.component.load({
      name: "hcm.mgr.approve.leaverequests",
      url:"/sap/bc/ui5_ui5/sap/hcm_lr_apv",
    hcm.mgr.approve.leaverequests.Component.extend("hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.Component", {
      metadata: {
      version : "1.0",
      config : {
      "sap.ca.i18Nconfigs": {
      "bundleName":"hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.i18n.i18n"
      customizing: {
      "sap.ui.viewReplacements": {
      "hcm.mgr.approve.leaverequests.view.S3": {
      viewName: "hcm.mgr.approve.leaverequests.CUST_HCM_LR_APV_EXT.view.S3Custom",
      type: "XML",
    Then I submitted the changes and tested the Custom BSP Application.But I am getting the error as below
    Error Message:
    Failed to load resource: the server responded with a status of 404 (NOT FOUND) http://sapfiorisrvr.domain.com:portno/sap/bc/ui5_ui5/sap/zhcm_lr_apv_ext/Component-preload.js
    Thanks&Regards,
    Akhil Das

  • Copying standard structure

    Hi experts,
    when i tried to copy standard structure. Not all the fields are copying. The structure im trying to copy is VBKPF_ALV. In this first 3 fields are getting copied. when i tried to convert that in to change mode only first 3 fields are getting displayed. But when i see in display mode all fields are visible.
    thank you
    regards
    vijay.

    thank you Jose
    but my problem is i want to add two more fields for this custom structure but it is asking for reference table and refrence field.  The field i added is wrbtr. when i entered ref. table as bseg and ref. field as wrbtr it is not accepting this combination.
    please help me in this.
    thank you
    vijay

Maybe you are looking for