Change of the backend logical system server

Hi all,
Our client is changing the backend logical system's server which is of ECC 6.0 moving all the transports in production from ECC system to another.
Can anyone explain what will be the impact to the SRM server? We have SRM 5.0( two clients one for EBP and another for SUS) and ECC 6.0 as the backend.
Do anyone else share their experience while changing the backend server in this case?
Our client says they will use the same name of the logical system so that all the config with that logical system name is taken care of.
Any thoughts on this please.
Best regards,
Sridhar.

Hi Dinesh,
Yes we are using backend material groups and materials. I hope you are speaking about the CRMPRLS (in R3) and CRMMLSGUID (in SRM) tables GUID entry for the backend logical system. We will verify that entry.
But can anyone has come across the same scenario,
You mean to say we have to follow the steps and do material replication again for the new backend server.
We have a plan to use same logical system name for the new production server also.
Any clues/suggestions.
Best regards,
Sridhar

Similar Messages

  • Ho to change the old Logical System in the new Client?

    Hi All,
    after a Client copy, I've to change the old Logical System in all the relevant SAP tables in the new client.
    In the Co tables too, such as CSKS.
    Could anyone tell me hoq to do it?
    Thanks
    G.Rossi

    Hi,
    So the only solution would be to rename the SID of one portal.-> Yes,Rename the SID of on portal
    Can this be done ? -> Yes,It can be done
    How is it done ? -> Use Export/Import method.Export the database of one SID. Import the same with different SID.
    Thanks and Regards,

  • Changing the default logical system names for adaptive RFC models

    Hello,
    When I create an Adaptive RFC model the dialog that asks me to specify the model name, package, source folder, etc. has default values in the "Default logical system name for model instances" and "... RFC metadata".
    I know I can type in another name there but I'd like to change the default name to something that fits our naming conventions. Can I change that? If so, can someone tell me where?
    Thanks in advance!
    David.

    Suresh,
    Thank you for your response. However, that is not what I was looking for. Sorry if my post was not clear.
    I knew that I could change it AFTER the import. I also know that I can type in something else besides the default DURING the import.
    What I am asking is if there is a way to change some configuration setting so that the 'default' that comes up in the drop down DURING the import is something different than what comes 'out-of-the-box' with NWDS.
    Hope that clears up what I'm looking for.
    David.
    Message was edited by:
            David Z. Pantich

  • How to change name of a logical system

    Hi SDN,
                 I am trying to customizing intial download data transfer from ECC to CRM. But in outbound queue of ECC it is showing an error of SYSFAIL with description of logical system name changed. Given note 558701.
    But I don't know old name of logical system.
    1) Can you guys please help how to find the old logical system name there are many logical systems defined in my system.
    2) and how to change it?

    Hi Ravi,
    Since logical system name is changed sombody in past must have ran BDLS to conver logical system name.
    Check tcode SLG1, this tcode will tell you whether there were any logical system conversion done in Past, if it is done then it will tell you from which old logical system its converted to new one. So you can find out old logical system name.
    Once you find out old logical system run BDLS again. It might possible BDLS ran unsuccessfully last time.

  • Two R3 servers have the same logical system name?

    Can two R3 servers have the same logical system name present in the same network? We plan to clone our production server and let the clone reside in the same network. The clone is identical with the production server with the same SID, hostname, logical system name, but different IP address.

    Hi
    Check this  [Link|http://help.sap.com/saphelp_nw70/helpdata/EN/da/5990df015b5b43a36f6ce7fa1ee8c0/content.htm]will cleare you doubt
    Regards
    Uday

  • Cannot find the Recv Logical system in Distribution Model

    HI experts,
    Im triying a Idoc to file scenario, the logical system for PI and R3 has been already created and assinged for the appropriate clients.
    and i ve created the port from r3 using tcode we21 and in PI using idx1 and Idx2. The RFC destination also created for PI and R3 system.. when i created the distribution model using BD64 in R2. when i assigning message type i can give the source logical system and i cant find the Receiver logical system...  Also in WE19 i cant find the receiver port (which i created in IDX1 and IDX2)..
    Could u tell me how to solve this prob???
    Regards
    Balaji

    Hii Ravi,
    Thanks for your reply,
    Yes i have created the port (RFC800) idx1 and give RFC destination which points the R3 system.
    I have assigned the meta data to that port using tcode idx2.
    And I have created port with port name "PORT800"  in R3 using we21 and give the RFC destination which points the PI system
    when im using the WE19... i gave source logical system as R3 Logical system and receiver logical system as PI Logical system.
    now im getting error like  "PORT RFC800 DOESNT EXIT IN THE THE TABLE OF PORT DISCRIPTIONS".
    Regards,
    Balaji
    Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM
    Edited by: Balaji Pichaimuthu on Jul 25, 2009 9:32 AM

  • How to get the current logical system?

    Dear Abapers:
    I can't find the logical system value from the table SYST, pls tell me how to get the current logical system name, Thanks!

    Hi,
    Check with the table T000, the Logical system field name is LOGSYS.
    Regards
    Thiru

  • Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?

    Is it possible to have windows on another operating system and keep OS X on the original operating system ? and If yes, Would it do any changes on the original operating system ?
    Thanks in advance.

    1. On your computer, yes. Use Boot Camp, Parallels Desktop, VMware Fusion, VirtualBox, or similar software.
    2. No; if you use an emulator, it may install system components. Back it up anyway.
    (110033)

  • Sending Message Type from the same Logical System to 2 different ports

    Hi,
    I need to transfer the same message type 'DEBMAS' in the same logical system,
    to 2 differenet port - directly to XI (as an IDOC) and to function (as a PROXY),
    In XI this are 2 different interfaces.
    I see in we21 that when adding message type in outbound I can also write message code or message function so I tried adding an additional row of DEBMAS with message code but it did not work.
    Thanks,
    Naama

    Hey,
    This question should not be posted here, but in the XI forum,
    anyways,you can do it in 2 ways
    1) You can send the message to XI, and in XI it should be configured to send to
    two different places, which can be done in the Receiver Communication Channel, one would be IDoc Receiver and another would be a SOAP Receiver. ( here you send one message to XI and XI will send it to the PROXY )
    2) You can specify the settings in your Partner profile (we21)and while generating the Port (we20).
    Regards,
    Samson Rodrigues.

  • The backend of system SAP_R3_UWL is not configured for optimized delta pull

    Hi All,
    I used the below to configure the Enabling Delta Pull Mechanism in UWL.
    http://help.sap.com/saphelp_nw04s/helpdata/en/eb/101fa0a53244deb955f6f91929e400/frameset.htm
    uwl_service user created and assigened role SAP_BC_UWL_SERVICE with the help of Note 873932 - Additional note on authorization of uwl_service user. But still i am having the  below error:
    The backend of system SAP_R3_UWL is not configured for optimized delta pull
    Thanks,
    Anumit

    Hi Sean,
    I have done everything that is mensioned in the Help.
    Thanks,
    Anumit

  • Can there be more than one port for the same logical system

    Can we have more than one TRFC port for tranferring data from one logical system to another?
    The requirement is to transfer same basic idoc type from one logical system to another through two different ports. Is it possible?
    For eg. some specific data (country specific) for the same basic idoc type can be sent through a separate port and the other data through a different port inorder to distinguish between the two.

    Hi Shital,
    I don't think so. Because of that what i told you. There would be a dirty trick (back routing) to solve your issue. But its quite difficult and not standard. You create two http receiver services  and two http sender services. You route your message depending on payload to the one or the other http receiver channel. The receiver is in both cases: THE XI! Now you have a second message, which you  can route to IDoc adapter. But in this case you have different sender and in the receiver determination you can put the sender, so you will be able to use different communication channnels and so different ports / destinations.
    Advantage: Your task would run, no performance problem (http: very good, asynchron)
    Handicap: You see every message double in the monitoring, the scenario is not easy to understand and it is a big task 4 other people to change it.
    Regards,
    Udo

  • The test package does not point to the correct logical system

    Hello,
    I have defined SMSY logical componant, I have copied project1 to project2.
    I have changed within the system landscape of project2, the logical componant.
    I have also defined a project plan, and the test packages.
    Hence, the test packages still do not point to the logical component that is defined in the landscape...
    I must have missed something !
    Can you help ?
    Thanks a lot

    hi
    try following
    1 check in smsy the logical component is correctly defined with clients dev qa and prd
    2 same logical component is assigned to solar_project_admin
    3 Project IMG is generated in the respective system
    4 in solar01 check the logical component is shown correctly
    5 Re- Generate the test plan once
    hope above steps will resolve issue
    regards
    prakhar

  • Could a change in the Windows operating system impact DAQ response?

    I use a PCI-6013 analog DAQ card (vintage 2002) to control and acquire data with a fairly old computer running Windows 2000. I installed the card in a newer computer running Windows XP. There were no other changes to software or hardware.
    The data now frequently shows a strange response in the first 0.3 seconds after starting to collect data. It reads very low (sometimes bottoming out) and comes up to the calibrated value within that first 0.3 seconds.
    Could the change in operating system be the cause of this? Is there something else I can do to diagnose what is happening? 
    -Kelan

    This sounds a bit questionable.  you are jumping from NT to XP withough changing software?
    Well vintage 2002 would put you in LabVIEW 5.1 and most likely traditional DAQ.
    LabVIEW 5.1 has no official support for Windows XP nor has 6.02 although it Should "Run without errors" according to prophisy-  that does not mean that there won't be issues just no errors.
    What drivers and software are you trying to port from NT to XP?
    Jeff

  • How to load a Hierarchy after a change in the R/3 system?

    Hi All,
    We have a hierarchy in BW hat we extract from R/3. But now they have added two new nodes to the hierarchical structure which is not being reflected in the BW version of the hierarchy. Can you tell me how to load into BW the latest version of the R/3 hierarchy with those two new nodes??
    Thanks Much for any Input,
    Reddy

    Hi Reddy,
    If you have modified just the function module to populate the hierarchy in R/3 then the hierarchies should load fine on BW. However if you have changed the datasource and there is a datasource(active) in the transport request in R/3 then you would need to replicate the datasource in BW and then load the hierarchy. Hope it helps.
    Bye
    Dinesh

  • How to use the iviews to connect the backend R3 system?

    is there any guide or help?
    thanks a lot!
    br

    Hi,
    YOu can reach ur r/3 system through iviews from enterprise portal by establishing a system connection .
    To create such a system
    refer to
    check out the following link for your requirement
    Create SAP Transaction iView using SAPGUI for Windows
    Once ur system is ready you can make transaction iviews and thus get on to ur r/3 system.
    Hope this helps,
    Regards,
    Uma.
    Do get back for further clarifications!!!!!!! and Assign points for helpful answers on SDN:-)

Maybe you are looking for