Change of the dialing codes for landlines in Saudi Arabia

After adding number (1) after zero to the geographic zone codes in KSA (Government website: http://www.citc.gov.sa/English/MediaCenter/awarenesscampaigns/Pages/PR_AWR_004.a spx ) we start face small problems.
and becuse I travel I saved all my contact numbers like this
( +966 11xxxxxxx ),( +966 12xxxxxxx ),
( +966 13xxxxxxx ),( +966 14xxxxxxx ),
( +966 16xxxxxxx ),( +966 17xxxxxxx )
1. If somebody called me from my contact list , his name not came on display but only the his number like (013xxxxxxx)
2. I cannot call any saved contact in my contact list
3. I like to save my contact list like ( +966 13 xxx xxxx) with spaces.
Message was edited by: AymanOZ

berryarab wrote:
should we move to IPHONE????
I would take Ronbob's advice before I would move to iPhone.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Similar Messages

Changes of the ZIP Code for the sales organization

Hi All,
I have done the changes of the ZIP Code for the sales organization by using the t code ovx5 the change of zip code in adress but when i rechek the changes in the order acknowledgement output there i can see the old zip code only.
Please help me how to make the change the zip code to SO, so that i can view that in output.
need to update pls help..
Thanks for help
Raj.

Hiii
Check weather your developer hardcode the sales organization pin code: else check the logic weathe Sales org Pin Code is getting from following logic. Go to table TVKO and put ur sales org number in VKORG field then execute
Get the ADRNR number and pass the same in ADRC table and get the POST_CODE1 as pin code number (give same logic to your abaper)
Regards
Shambhu Sarkar

How can I change the area code for DVD's?

I brought some DVD's from Germany and watched them on my Mac Pro. After the DVD was involved in the drive I have to change the area code for the drive. I don't know why but I did it. I could watch the film. Today I like to watch a DVD from US but after the DVD was involved I got a message "the area code does'nt match the DVD code" and I can not change the area code.
What can I do to watch both arts of DVD's. Isn't that normal to have DVD's all over the world?

Here is the bit that Bengt forgot to answer!
DVD Player: About DVD-Video Regions
Region encoding is the mechanism that enables motion picture studios to control the worldwide release of their movies. It is required by the DVD Forum (http://www.dvdforum.org/forum.shtml) in all commercial hardware DVD players. Every DVD-Video disc contains one byte of data representing a region code, which limits where the disc can be played.
http://support.apple.com/kb/HT2397
Once you have changed the region settingon your Mac five times it is set in stone for ever.
Try using VLC for playback instead:
http://www.videolan.org/vlc/

Why won't Apple give out the unlock code for an iPhone 3Gs when the contract was honored and I am still an AT

Why won't Apple give out the unlock code for an iPhone 3Gs when the 2 year contract was honored and I continued to be an AT&T customer with an iPhone 4. I wanted my old 3gs unlocked so my daughter could use it overseas when she is deployed. AT&T service over there *****, the international plan was not worth it. The individual SIM cards per country are much more reliable and cheaper. Teslestial in Iraq and Afghanistan, Telecom in Croatia,Vodafphone in Germany and Italy. Why Apple will not unlock these phones for our military to utilize is incomprehensible to me. These young men and women are fighting for these Apple people to go to work every day, safe, to live lives they have become accustom to yet releasing a phone to use on another network they can't do at least for the military.... WHY APPLE?? WHY? A good excuse not some of the many lame excuses I have received on the phone many times. AT&T states it is Apple that will not allow them to unlock the phones... Please tell me why? All I want Is my daughter to have a phone I trust, to be able to call me when she is given the free time to do so and I trust the apple phone.
Apple, please reconsider your stance on this issue. I am having a hard time understanding why you will not unlock the iPhone.
A simple code could allow me to talk to my daughter while fighting for our country the Great USA. Apple should be on the front line and enabling those fighting for our life, liberty and pursuit of happiness to use unlocked phones on reliable local GSM networks.
I honestly hope that someone who has some sort of authority to begin allowing the release of unlock codes, and not forcing people to unlock their phones with some program produced by some hack just to be able to use your wonderful phone. That is is in a nutshell, People love the iPhone so much that they want the ability to use it on the most reliable GSM carrier available to them. That should be a major compliment. Even men and women on the front line want your phone. I agree, my service is not the best where I live either, love the GSM technology so stay with it, but if I had the ability to change to the other GSM network that has much better coverage in this area of the country I would change. To change now I would not have my iPhone and that I will not part with.
Apple, please reconsider opening up the lock code and allow your gem of a phone to be used by many more people in many more areas and most importantly overseas fighting for our country. I know if this is really thought about Apple would understand and come to the conclusion to release the unlock codes, and stop the people from hacking in to use the iPhone on other networks.
I would love for my daughter to be able to use my iPhone 3gs while fighting for our Free country.
A response would be appreciated.
Thank you.
An Apple customer for 10 years, phones and computers.
P

Defiled:
I did sign a two year contract and completed that contract. The 3gs is no longer in service. My daughter is going overseas to protect you and your family. I was attempting to find a way for her to have a reliable phone that could offer her some connection with home as she travels through the middle east. She travels in missions all over.
At&T unlocks other phones of theirs why not the iPhone? AT&T says that Apple will not give them the code, it is not the carrier. If I would have known this situation would have come up I would have bought and unlocked 3gs phone"Deggie" . My main complaint is that Apple has not good excuse as to why they will not allow their phones to be unlocked from services well, AT&T . I bought the phone full price, completed the contract terms, even went for and iPhone 4 with another2 year contract, along with owning an apple computer... I love the product. My main issue is give me a good answer as to why you won't allow a phone to be unlocked. It doesn't hurt Apple, People still have to buy the phones from them, and use their App store and iTunes.
Sorry, just upset about my daughter heading over there, boots on the ground, and just pray she will be safe. Would have liked to facetime her while she is in the airports and in specific areas allowed for that.
Please don't come down on me for asking this question. I understand all the contracts etc.... but to single out the iPhone specifically to not unlock after contract is over does not seem fair.
Thank you for your responses.

How to delete the region code for country in T005U

Hello,
The region code for XX country are changed, So I have deleted all entries for that country in transaction code "OVK2" and updated the new region code which should be updated in Table T005S and T005U.
But in table T005U there are few region code for language other then EN. Now I need to delete the entries T005U for other language.
Now region code in OVK2 = Table T005S, but not equal to T005U
How language can be selected to delete the region code (TABLE T005U), please advise.
Thanks in advance.
Praveen

Hi Praveen,
In order to delete the entries from the language table T005U, you will have to maintain in T005S.
It means that, suppose in table T005U, you have a region appearing in two languages danish and german and the corresponding entry does not exist in T005S, then follow the steps below.
1. Maintain Region XX in EN in T005S.
2. Log on in language Danish, and in table T005U, only delete the text and log off.
3. Log on in Language German, and in table T005U, delete the text only and log off.
4. Now your T005U table is clear, log on in language EN and delete from table T005S.
5. Check both tables T005S and T005U for the region XX. they both should be empty.
Regards,
SAPFICO

HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago. I changed my iTunes password about 10 months ago; but apparently, the backups continue to use the password that existed when the phone was first set up.
A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password.
I thought iTunes and Apple were smarter than that. With so many posts stating exactly the same problem, it is clear that this is bug in the software.
Best,
Craig

Here the SSCCE code for the prvious problem posted by me.

Following is the SSCCE code for the program of search which is having the problem i have asked before.
here when you run it will show a form which have a search button on it and when you press it a panel will shown below which have a table( it is just a bounded area without any column or row as i have removed the database functionality and we dont have to do with it).
the problem is the same that firstly i want to make the panel invisible.
(the blue and yellow colors are just to seperate the panel and the container) Secondly i want to remove the extra large space added below the last table and thirdly i want that on each press of the search button the scrollbar will focus on the new table added.
import javax.swing.*;
import javax.swing.table.DefaultTableCellRenderer;
import javax.swing.border.*;
import java.awt.*;
import java.awt.event.*;
public class Temp extends JFrame implements ActionListener
     Container c;
     Toolkit tk;
     JLabel l1; int y=30;
     JPanel p1,p2,p3;
     JRadioButton rbByName,rbBySirName,rbByID,rbByCity,rbByState;
     JButton btSearch,btView;
     ButtonGroup bgSearch;
     JTextField txtSearch; BoxLayout boxl;
     ImageIcon i1;JScrollPane sp1;JViewport vp;
     public Temp()
          super("Search-Address Management System");
          c=getContentPane();
          tk=Toolkit.getDefaultToolkit();
          setSize(1024,768);
          c.setBackground(Color.BLUE);c.setLayout(null);
          setDefaultCloseOperation(JFrame.DISPOSE_ON_CLOSE);
          defineComponents();
          settingBounds();
          addListeners();
          addComponents();
          setVisible(true);
     public void defineComponents()
          p1=new JPanel();
          p1.setLayout(null);
          p1.setOpaque(false);
          p2=new JPanel();
          p2.setLayout(null);
          p2.setOpaque(false);
          p3=new JPanel();
          boxl=new BoxLayout(p3,BoxLayout.Y_AXIS);
          p3.setLayout(boxl);
          rbByName=new JRadioButton("First Name");
          rbByName.setOpaque(false);
          rbBySirName=new JRadioButton("Last Name");
          rbBySirName.setOpaque(false);
          rbByState=new JRadioButton("State");
          rbByState.setOpaque(false);
          rbByCity=new JRadioButton("City");
          rbByCity.setOpaque(false);
          rbByID=new JRadioButton("ID");
          rbByID.setOpaque(false);
          btSearch=new JButton("Search");
          bgSearch=new ButtonGroup();
          txtSearch=new JTextField();
          btSearch=new JButton("Search");
          TitledBorder tb=new TitledBorder("Search Criteria");
          TitledBorder tb1=new TitledBorder("Search");
          p1.setBorder(tb);
          p2.setBorder(tb1);
     public void settingBounds()
          rbByID.setBounds(20,30,50,20);
          rbByName.setBounds(120,30,100,20);
          rbByState.setBounds(20,70,80,20);
          rbByCity.setBounds(120,70,50,20);
          rbBySirName.setBounds(240,30,100,20);
          p1.setBounds(30,40,400,110);
          p2.setBounds(30,180,400,80);
          p3.setBackground(Color.ORANGE);
          txtSearch.setBounds(50,210,250,25);
          btSearch.setBounds(320,210,80,25);
          rbByID.setSelected(true);
     public void addListeners()
          btSearch.addActionListener(this);
     public void addComponents()
          p1.add(rbByName);
          p1.add(rbBySirName);
          p1.add(rbByState);
          p1.add(rbByCity);
          p1.add(rbByID);
          c.add(txtSearch);
          c.add(btSearch);
          c.add(p1);
          c.add(p2);
          bgSearch.add(rbByID);
          bgSearch.add(rbByName);
          bgSearch.add(rbBySirName);
          bgSearch.add(rbByCity);
          bgSearch.add(rbByState);
     public void drawtable()
          JTable t1=new JTable()
              public Class getColumnClass(int column)
                return getValueAt(0, column).getClass();
          if(y==30) //as temporay variable only to add the scrollpane once
               sp1=new JScrollPane(p3,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_NEVER);
               sp1.setBounds(30,300,660,380);
               c.add(sp1);
          JScrollPane sp=new JScrollPane(t1);
          sp1.getViewport().setOpaque(false); // to make the scrollpane transparent but not worked
          sp.setMaximumSize(new Dimension(600,100));
          p3.add(Box.createRigidArea(new Dimension(600,20)));// invisible filler to add space between two tables
          p3.add(sp);
          p3.revalidate();
          y=y+110;
     public void actionPerformed(ActionEvent e)
          if(e.getSource()==btSearch)
          drawtable();
     public static void main(String args[])
          new Temp();
}Please reply with the code required to be added.

the problem is the same that firstly i want to make the panel invisible.If I remember you other postings I think you mean to say transparent, which means the background of its parent component will be painted. If you make the panel invisible, then all the component added to the panel will also be invisible.
You have a structure something like this:
main panel
    - scroll pane
        - viewport
            - table panel
                - table1
                - table 2As you where told in one of you many other posting on this topic, if you want the background of the main panel to show through then you need to make all the component on top of the pane non-opaque, not just the viewport. So, the scroll pane and table panel also need to be changed.
And don't forget to reply to all your other postings on this topic stating that those postings are "closed" so people don't waste time answering in those postings. Keep the conversation in one posting so everybody knows what has been suggested.

The right code for an additional field....

Hi all
Creating a query, I've written the follow code for the additional field "FATTURATO"
CLEAR FATTURATO.
FATTURATO = LFC1-UM01U + LFC1-UM02U +
            LFC1-UM03U + LFC1-UM04U +
            LFC1-UM05U + LFC1-UM06U +
            LFC1-UM07U + LFC1-UM08U +
            LFC1-UM09U + LFC1-UM10U +
            LFC1-UM11U + LFC1-UM12U.
But the query lists a negative value for the additional field "FATTURATO"
What modication in the code should I put to change the value in positive?
Thanks

CLEAR FATTURATO.
FATTURATO = LFC1-UM01U + LFC1-UM02U +
LFC1-UM03U + LFC1-UM04U +
LFC1-UM05U + LFC1-UM06U +
LFC1-UM07U + LFC1-UM08U +
LFC1-UM09U + LFC1-UM10U +
LFC1-UM11U + LFC1-UM12U.
FATTURATO * -1.

HT5961 I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number

I want to receive the verification code for the keychain but I was sent to unknown number because the last two digits do not represent my phone number, so how can I change it to receive it on my cell phone ?

I found this in the iCloud Keychain FAQs:
How do I set up iCloud Keychain on a new device if I don't have one of my other devices to approve from?
If you don't have access to any of your other devices that are using iCloud Keychain, you can still set up iCloud Keychain on another device if you have these items:
- Your iCloud Security Code
- The device that is using the SMS-capable phone number you provided when you first set up iCloud Keychain. A verification code is sent via SMS to this phone number. If you don't have access to this number, contact Apple Support, who can verify your identity so that you can complete setup on your new device.
- If you have these items, follow the iCloud Keychain setup steps documented above. Your iCloud Keychain will then be pushed from the cloud to the new device.
So it seems that you would have to directly contact the Apple Support: http://www.apple.com/support/icloud/contact/

What is the T-Code for creating Cost center - profit center standard hierar

Hi,
What is the T-Code for creating Cost center - profit center standard hierarchy.Please provide me the T-codes.
Thanks

Hi Supriya,
Create / Change Cost Center Standard Hierarchy - OKEON
Display Cost Center Standard Hierarchy - OKENN
Create Profit Center Standard Hierarchy - KCH1
Change Profit Center Standard Hierarchy - KCH5N
Display Profit Center Standard Hierarchy - KCH6N
Srikanth Munnaluri

What is the T-code for Viewing the Payment Advices....

Hi,
What is the T-code for Viewing the Payment Advices....
Regards
Sap Guru

Hi,
Payment advice creation - FBE1
Payment advice Change - FBE2
Payment advice Display - FBE3
Payment advice Delete - FBE6.
Assign points if helpful.
Thanks,
Vasu..

What is the pairing code for an HP Photosmart 309a using windows 7?

what is the pairing code for an HP Photosmart 309a using windows 7?

Hi,
The Default priting code is 0000.
If you changed the code, you may locate the current on by clicking the Setup Menu,
Scroll to the Bluetooth Menu and then click Passkey.
For any issue, you may find a step by step bluetooth configuration guide below:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02530249&cc=us&dlc=en&lc=en&product=3737195&tmp...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Where to configure the reason code for payment differene

Dear Experts,
I did the settings in obxl with reason code option and changed the screen layout for the postings keys for payment difference as mandatory. while doing the account assignment in obxl system asking the reason code for payment difference. Where to configure the reason code any t.code is there, please guide me.
J.francis

Just Go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment > Define Reason Codes (Manual Outgoing Payments)
There you have to create Reason Code
Now go SPRO>IMG>Financial Accounting (New) >Accounts Receivable and Accounts Payable > Business Transactions > Outgoing Payments > Manual Outgoing Payments > Overpayment/Underpayment >Define Accounts for Payment Differences (Manual Outgoing Payment)
Here assign GL
Best Of Luck
Tanmoy

Where's the source code for the MIDP 2.0

Hi
does anybody know if the source code for the MIDP 2.0 is available anywhere, if so please give me the link, I've searched for it but couldn't find. I need it to create a custom class based on the Command class, but need to have a look at the source code of the "Command" to make the appropriate changes to my extending class, so I can't do it without a look under the hood.
Any help would be greatly appreciated

You can find reference implementations at http://java.sun.com/products/midp/index.jsp
But they are only to assist manufacturers in implementing their own versions, and do not necessarily reflect the code running on a given device. All you can assume is what is stated in the MIDP specification. However, reading the RI code may help you better understand the spec.

Lost the content code for free up gradation of mountain lion. What to do ???

Lost the content code for free up gradation of mountain lion. What to do ???

https://discussions.apple.com/thread/4134740
Thread /w same question

Change of the dialing codes for landlines in Saudi Arabia

Similar Messages

Maybe you are looking for