Change onion skin color

Good day !
Not so long ago tryed to make animation but found it difficult to work with cause of same onion skin colors.
I mean i do not like when two onion skins are of the same colors.
How may i change onion skin color for previous frame to, for example, blue and for next frame to red ?
Thanks in advance

Hi,
You will not be able to change the color of the onion skin as it represents actual objects across the selected range of frames. You may want to use Onion Skin Outlines which uses Layer Color and you can change the layer color via Layer Properties dialog. However the onion skins across frames of a given layer will have a same color.
Thanks!
Mohan

Similar Messages

Change halo skin 3 color

I am inserting an ,flv file on an html page and using the halo skin 3. Can I change the color of the skin and, if so, how? I am using Dreamweaver CS5 on a mac.

Hi
Simple answer, No you cannot change the skins colour.
If you have flash pro you can create your own skins but unless you have experience of doing so, expect problems.
PZ
www.pziecina.com

Changing Skin color in ECC6?

Dear SAPIENTS,
How can i change screen color in ECC6?
Regards,
Kaushal Rai

Hi,
Skin color in ECC6 or you want to change screen in GUI.
use start menu --> control panel --> SAP Configuration to change GUI skin
Or you may have GUI Twik on your desktop.
BR,
Darshan

Change the background color of a table created by ADDT (Login)

I am trying to change the background color of a table in the login form created by the developer's toolbox. I then go and select the table and change the background color. But it has no effect. The only insight I have is when I delete this "" from the Action in the form, then the table's background color changes. As far as I can tell this line of code is only return the url of the page.
I am not understanding something.
Does anyone have any insight?
Thanks!

the table is linked using a CSS rule..
the CSS rules comes from something called Skins..
see mxkollection2.css.
KT_XXX are the class ID's for table names.
if u change this rule it will effect all the tables which use that rule in ur whole website.
u can try switching skins from ADDT control panel.
KT_tngtable is the tables css rule name defined in skins /Skinname/tng.css
hope this helps u ..
mohnkhan
http://www.mohitech.com

Change the tab color

Hi,
i'm unable to change the tab color of panelTabbed item, i've tried the following in a css sheet:
af|panelTabbed::tab:selected {
font-style:italic;
background-image: url("../Images/section_label_body.jpg");
border-bottom-color: red;
border-color: Fuchsia ;
border-top-color: Green;
outline-color: Yellow;
color: Aqua;
font style and background image seems to work (which tells me that i have the right skin selector) but non of the rest is changing the color of the tab.
does anyone knows how to do that???????
Note that when i say tab i mean the tabs header, where you click on it and it opens the tab body.
Thanks,
Alain.

Hi,
best tip I can give is:
Disable content compression for the generated HTML output of the ADF Faces page. This will change the style class names from being obfuscated, which we use to reduce the download size of pages. Astyle class that shows as .x3s at runtime might show as af_inputText_content after this. The af_inputText_content then is waht you need to discover and translate into a valid skin selector.
<context-param>
<param-name>org.apache.myfaces.trinidad.DISABLE_CONTENT_COMPRESSION</param-name>
<param-value>true</param-value>
</context-param>
Run the ADF Faces application you want to discover the skin selector for in FF with Firebug and the WebDeveloper plugin installed.
Select the tab and look at the skin selectors displayed as the style class properties. If you find someting like af_panelTabbed_tab then this translates to af|panelTabbed::tab. If you see something like .p_selected then this means its a pseudo class that needs to be appended to the selector like af|panelTabbed::tab:selected.
Use Firebug in inspect mode and select the tab. This shows you all the selectors as style classes in the generated HTML output. Open the Web Developer plugin to edit CSS on the page. Then add the style class selector you found, e.g. .af_panelTabbed_tab (note the leading dot ".") or with a curly brace
.af_panelTabbed_tab{ ... }
Within the cury braces, type the CSS you want to set and see how it behaves. You may have to play a bit to exactly find the style class and css you want, but assuming that the follwing works
.af_panelTabbed_tab .p_selected{background-color:red}
then this translates to teh following skin selection to be copied to the CSS skin file
af|panelTabbed::tab:selected{background-color:red}
Note that this backward translation from style class to skin selector needs some patience. However, experience proves to be the best when cooking and so it does for skinning.
Hope this helps
Frank

CS4 - Unwanted ghosting effect showing up in all videos - Similiar to an onion skin

I'm having some sort of weird ghosting effect on all my videos in Premiere Pro CS4. It's similiar to an onion skin that shows the previous frame. It shows in the timeline preview and when I render out the video. I've never had this problem before until just a few days ago. It even shows up in old premiere files that I made weeks ago that didn't have this problem at the time. I've even tried working on a different computer using a different Premier CS4 and had the same problem.
Is anyone else experiencing this or have I gone crazy?

The videos are 30fps and so is the project.
Are you sure of that? That's definitely frame blending, which occurs in two instances: when a clip has been explicitly time-altered (e.g. from 100% to 33.33%), or when a clip's frame rate does not match your sequence frame rate. For instance, your clips might actually be 30fps, but your sequence is probably 29.97fps--a minor difference, but enough to cause the problem you're seeing.
Confirm the true frame rate of each of these, and if they're different, you can put the clips in the correct sequence, or you can interpret your clips to match the sequence--a change of 30 to 29.97fps is not going to cause any weird slow downs.

Query regarding changing the background color of an input text

Hi,
I want to change the background color of an input text component.When I tried with the back-ground color inline style, it changed the color of the label instead of changing the background color.Is there any way I could do it?
Thanks in advance

Hi,
use the contentStyle property (or skinning af|inputText::content if you want to change this in one place for all input text fields)
Frank

How can I change the default color (Blue color)?

Hi,
I use JDev 11g last version
when I use decorativeBox or panelStretchLayout I use (dark - light - medium) in theme but by default it be in blue color can I change this blue color to any other color?
I don't want to use an image or change background color using css file I want bu easy way to change the theme with any color except blue.
Thank You...
Sameh Nassar

Hi John,
Thank You for your reply
I know that can be solved by using skin.
but when I use (dark - medium - light ) the appearance change without using skins.
I ask is there any way to change the default color (blue) with any other color.
- It means when I write a dark in decorativeBox theme I found the decorativeBox in red color (or any other color) instead of blue color.
- Where can I find the place which say the blue is the default color?
Thank You..
Sameh Nassar

Changing the Skin

A long time ago the info on how to change the photoshop elements background "skin" color from the grey to black. I can't find it anymore so I was hoping someone could help :)

I would not recommend changing it - neutral grey is the best background colour to use for colour images. But, if you must ...
Set the foreground colour to be what you want to use. Select the Paint Bucket tool. Shift/click on the background.
BTW, I believe that the default is 192/192/192 grey.

Differences between Browserlab ie7 & ie developer tools browsermode: ie7 + onion skin problem

Hi,
I've just noticed display differences between what I see in browserlab for ie7 and what I see using ie9, but in browsermode:ie7. I would have thought they would show the same as both are supposed to represent what the webpage would look like in ie 7. Please can someone explain:
a) why they should be different,
b) which is the correct one.
Basically the Menu is perfect in BLab, but is floated left in browsermode:ie7.
There is nothing out of the ordinary in the code for this page, just html, css, a tiny bit of javascript & some php.
I am using windows 7 on a PC and the problem occurs if I use BLab through Firebug or directly from Dreamweaver.
The url is my old site that I am in the middle of updating, but I still get the same error with the new site that I am testing locally:
http://www.laughingrabbit.co.uk/
Kind regards
I am also having a problem with the onion skin feature, which I had about 2 months ago, but which then went when I deleted the cache and rebooted - no such luck this time.
When I try and show 2 browser views over each other, only one will show when I slide the slider bar making direct comparison impossible - both views stay the same as the one on the left.
eg try http://www.laughingrabbit.co.uk/contact.html The corners of the form should be rounded only in later versions of ie, as it isn't supported in earlier version.
It is the same either through the main BL interface or Dreamweaver.
I have tried closing down BL, deleting cache etc (the usual stuff), but it doesn't make any difference. I work on a PC.
Has anyone else had issue with this and if so, how did you solve it.
AND YES, I AM SLIDING THE SLIDER FROM LEFT TO RIGHT and all over, but ti makes no difference
regards
Bek

hi Mark, Here is one example, on my new site. I have used css3 to round the tabs in the navigation which works for FF5, but obviously not for ie7, but no matter how much I slide the slider accross the image (and the tabs) never change. i get the same whenever I try and use onionskin at the moment - the image doesn't change from the one on the left hand side. If I swapped FF5 & ie7 round (as per the image) then the rounded tabs change to square as you would expect in ie7, but don't change to rounded as you slide the slider to the FF5 side.
kind regards
bek

How can I change the background of a running webpage on my own. Example Facebook I want to change its backround color from white to black just in my view not for all

How can I change the background of a running webpage on my own. Example Facebook I want to change its background color from white to black just in my view, not for all. Cause I really hate some site with white background because as I read for an hour it aches my eyes but not on those with darker background color.

You can use the NoSquint extension to set font sizes (text/page zoom) and text colors on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

In Pages 5.0 How do I change the highlight color?

In Pages 5.0 How do I change the highlight color?

Oh! I understand now. See screenshot below. It's called "Character Fill Color":

Change the font color of a text field in a table by key-combination

I want to change the font color of a text field in a table (single cell only) on pressing a key combination. Does anybody know how to do this.
I have a lot of data in a table. During an evaluation of the data in a meeting I want to change the color of the text depending on the result of the meeting. (for example: High risk = CTRL+R makes the text red).
I know how to change the color using a button, but I do not want to add a button after each cell. For this reason I would like to do it on a key combination that alway refers to the active cell.
Many thanks for your help in advance.
Marcel

Hi,
I don't think you can use the ctrl key like that as those shortcuts will be intercepted by Reader (ctrl-R toggles the ruler display on / off). You also might have trouble updating the color while you still have focus on it. You can use the shift key in a similar way, so if you only have lower case characters in the text fields then you can do something like;
if (xfa.event.shift)
    switch (xfa.event.change)
        case "R":
            this.fontColor = "255,0,0";
            break;
        case "O":
            this.fontColor = "255,102,0";
            break;
        case "G":
            this.fontColor = "0,255,0";
            break;
    xfa.event.change = ""; // ignore character
If you need uppercase characters maybe you can have one button to set "review mode" and test that on the if (xfa.event.shift) line. But again it wont take effect until you have tabbed out of the field.
Regards
Bruce

Why is it not possible to assign a hotkey to onion skinning? (For toggling on/off)

In Flash CS6 when animating frame-by-frame by hand, I'm constantly toggling onion skinning on and off, and the same with the "loop" button right next to it for looping a certain range of frames. Neither of these appears to be assignable to a hotkey, meaning I need to take the mouse/pen away from the drawing and hit these buttons several times a minute, really putting a damper on the workflow.
Might we be able to get this in the next patch? It seems like a no-brainer, especially for a program that many people use for hand-drawn animation projects.

Hi Steve -
Thanks for the info. I have a few more questions...
Andy,
Yes, this is exactly the issue. Currently I am
invoking the UIX servlet not as a registered portlet
but as a hard-coded URL link on the portal page.Are you saying that in order to access the UIX application, the user clicks on a link which navigates out of Portal? If so, is this by design, or did you go this route because of problems creating a portlet for your UIX servlet? That is, would you prefer to have your UIX application run inside of Portal as a portlet, or do you explicitly not want this?
Also, can you provide more background about your deployment environment? In particular, is the UIX application running locally on the same machine as Portal, or remotely on another machine? Is the UIX application running in the same application server/servlet engine as Portal?
The application runs connected to the database but
without the context of the SSO Portal user. I want to
be able to display the Portal username on the uix
pages, have the VPD context in the database
connection (we have striped the tables but it only
works if connected via Portal!!) and potentially have
access to some of the extended Portal functionality
in the JPDK (this last one a "nice to have").Unfortunately I have no idea whether this is possible, so I'm not going to be much help on my own. The best I can do is try to track down someone who can actually speak to this issue. However, given the lack of documentation and the fact that you weren't able to get a solution through support, I wouldn't be suprised to find that this type of integration simply isn't supported yet.
I think you mentioned in the TAR that you had seen support for similar integration with Struts. If you know of documentation which shows how to do this type of thing with Struts, could you point me at it?
Andy

How do I change the text color of footers on select pages? (InDesign CS6)

Good afternoon,
Months ago, I worked with a graphic designer to put together a 100-page workbook for my training company. He turned all of the files over to me and I'd like to make a small change before we print another run for a new client. Specifically, I'm having trouble changing the text color on select pages. Since a picture says 1,000 words, let me give you an example:
As you can see, the copyright information on the right side of the page is difficult to read here when placed over the photo (you may have to look closely, but it's along the guy's sleeve). What I'd love to do is change that part of the footer (not the left, page number side) to white text. This would make it quite a bit easier to read. There's a number of other pages in the book that I want to make this change to. I'm not sure why I never noticed it or mentioned it to the designer. I suppose I've become more discerning since then.
Let me tell you what I've tried to do:
I learned how to override master pages by CTRL+SHIFT clicking on the footer. However, this has not worked for me. It allows me to change the page number part, but not the copyright side. Additionally, sometimes when I override the master the formatting of the footer goes goofy. For instance, the left side and right side come together and end up in the middle of the page I'm working on.
I'm looking for a quick way to go through and make the footers easier to read on pages where they are backed by a photo. Hoping you can help me. Please let me know if you need any other information.
Best,
Taylor

I think you should have left it as it was. It seems like what you had was single pages flowing as spreads within InDesign. Like below. That is the correct way, and when you changed it to all single, it did create your footer problems.
Will you be sending the file as a PDF to your online printer? If so, then leaving the InDesign file set as below is fine. The PDF output will separate the pages.
All you have to do is make sure that Pages, not Spreads, is chosen when you output the PDF

Change onion skin color

Similar Messages

Maybe you are looking for