Change only SID
We have a need to change the sid only on images in a VM environment. Sysprep seems to force more than just a sid change. Is there a way to build a xml file that will ONLY change the SID and not reset anything else?
Hi,
Yes, regarding SIDs, Microsoft does not support images that are prepared using NewSID, we only support images that are prepared using Sysprep. Sysprep does a lot more than just change the SID. Microsoft has not tested NewSID for all deployment cloning options.
Here is a great article by the author of Newsid
http://technet.microsoft.com/en-us/sysinternals/bb897418.aspx
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
hello,
i need a technique that changes only one side of box. For example a box should only growth in height (not in depth). The thing i'm trying to realize is an animated bar chart via java3d. In this bar chart boxes should represent the bars. With scaling i always manipulate two sides (e.g. positive y AND negative y).
Your help is greatly appreciated.
TNX in advance
JIVIyou could always just do the two-sided scale and then translate it to the correct position.
e.g. If height is 512 pix and you scale by 0.5, then it would shrink by 256 pix, or 128 on either side. Simply move it down 128 pix after scaling. -
Why can't Apple make 'publish changes only' for non .mac users?
The recent iWeb update to 1.1 and the now increasingly obvious differential between .mac and non .mac features has prompted me to post here today.
I can understand comments, passwords and search facilities being a .mac only experience because it requires server side technology. I can also understand that .mac users get enhanced features like slideshows as well.
But why is the fundamentally *basic* option to 'publish the changes only' not available to non .mac users?
I know uploading to .mac uses a different protocol to uploading via FTP, but I don't think it is about that. Obviously the software engine in iWeb 1.1 can now track the pages that have changed, and flag those for uploading. So if the facility to do this is not available with non .mac uploading, is this some form of crippleware? Can any software engineers comment on this or am I talking off the top of my head? [And please mods, don't delete this post - I use the word 'crippleware' in its harshest form, clearly I can still use iWeb to make fantastic websites - I am asking a technical question here.]
Michael
A Trusty Quicksilver G4 Dual 1GHzOK, from reading this thread:
http://discussions.apple.com/thread.jspa?threadID=486335&tstart=0
There is a pattern: An error occurred while publishing file “/blah/blah", while file "/blah/blah" seems to be random from one person to the next, but they all share one thing and that is communication protocol.
For iWeb to be able to publish changes to .Mac, it has to:
1. identify if the file exists
2. do the following:
2a. if not exists, copy it to .Mac
2b. if exist, do some sort comparison - CRC checksum -
2b1. if checksums match, don't copy
2b2. if checksums don't match copy it to .Mac
At least I think that's what going on, I don't have .Mac so that is best I can think of. Perhaps, some Apple SW engineers can jump in here.
Now, the bad part is iWeb has to (and I'm assuming iWeb uses WebDAV):
1. go thru each file locally
2. crawl its way into .Mac (WebDAV is a slow protocol) to find the the counter part.
3. when it finds a file that matches a client side file, it has to (some how) do checksum on-the-fly across the net work (which is slow and congested)
#3 is I think where it failed, there are many factors here: 1) networks congestion 2) latency 3) protocol overhead 4) checksum calculation time etc...
iWeb eventually times out because any/all of the above.
It's nice that WebDAV can author to the host yada, yada, but it's so SLOOOOOW.
What I would do is for every publishing, I would build a files and their checksums keep it on the host (or local, must be hidden).
For subsequence publishing, I would (use a fast protocol like FTP) download this pre-built files/checksums list. Locally, do a full publishing, making checksum comparison, the result is delta changes; upload only those. Build a new files/checksums list upload that too.
What I mean to say is offload everything that is possible to local machine, bandwidth is PREMIUM! -
How to change the SID during system copy
This blog /people/johannes.heinrich/blog/2006/07/07/new-features-in-db2-udb-v9--part-3 (i.e. the "new feature of V9" in this group) only
talk about the system copy without changing the SID.
In reality, we often want to change the SID during the system copy. Can we modify the script mentioned in above blog
to make SID change possible?
Thanks!Hi Christy,
if you´re using export/import which is prefered you can change the sid during the parameter setting for export and import. You´ll be asked by the old sid and the new sid. For the tablespace names it is not so important because db2 is using tablespace id not the name for the internal administration.
Regards
Olaf -
Change my sid ecc to pcc causes problems...
when i am going to change my sid ecc to pcc
then i found a problem
when i up my mmc
start pcc(SID) get an error
get processes list failed 80010105
the server threw an exception.
what can i do
Edited by: Julius Bussche on Nov 3, 2008 1:39 PMThe ONLY supported way to change the SAP SID is to make a system copy (either homogeneous or heterogeneous), so you will have to follow the guidelines given in the respective installations guide and sapnotes!
Check System Copy and Migration
GreetZ, AH -
Password self-service errors - Password can be changed only once in a day
Hi experts,
We've been using password resets without issues for several months. Recently we upgraded from version 5.3 SP12 to SP14.
I've read the CUP release note that explains that how password resets now validates against the ABAP system parameter for login/password_change_waittime.
The errors we are experiencing happen even when the users' password is reset for the first time in a day.
Error message:
X Unable to reset password in the following system(s): ECDCLNT100. Password can be changed only once in a day
Please advise if you have experienced this error, if there is a resolution, and/or if there is a way to disable the parameter check.
FYI - We are only using password resets in our non-production systems and are not concerned with multiple daily password resets.
Thanks.Hello
Are you using PSS with a CUA system?
Then you can try to upgrade the CUA to virsanh sp16.
or maybe this note: 1552707
KSM -
Change only material qunatity in sales order by using BAPI
Hi All,
How to change only the material quantity in existing sales order by using BAPI.
Please help me in this regards.
Regards
Deekshitha.Hi
See the sample code and do accordingly
REPORT Z_SALES_ORDER_CHANGE
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65(0)
MESSAGE-ID ZZ.
TABLES: VBAP.
DATA:
V_FILEIN(90) TYPE C,
V_RECIN TYPE I,
V_RECVBAP TYPE I,
V_RECORDER TYPE I,
V_VBELN LIKE VBAP-VBELN,
ORDERHEADERINX LIKE BAPISDH1X.
DATA: BEGIN OF I_ORDERS OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
BRGEW(18) TYPE C,
VOLUM(18) TYPE C,
END OF I_ORDERS.
DATA: BEGIN OF I_OUTPUT OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
GEWEI LIKE VBAP-GEWEI,
BRGEW LIKE VBAP-BRGEW,
VOLUM LIKE VBAP-VOLUM,
CKWGT TYPE C,
CKVOL TYPE C,
END OF I_OUTPUT.
DATA: BEGIN OF ORDERITEMIN OCCURS 0.
INCLUDE STRUCTURE BAPISDITM.
DATA: END OF ORDERITEMIN.
DATA: BEGIN OF ORDERITEMINX OCCURS 0.
INCLUDE STRUCTURE BAPISDITMX.
DATA: END OF ORDERITEMINX.
DATA: BEGIN OF RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF RETURN.
DATA: BEGIN OF BAPIRETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF BAPIRETURN.
PARAMETERS:
P_PATH(45) TYPE C DEFAULT '/usr/users/ftpsapom/' LOWER CASE,
P_FNAME(32) TYPE C DEFAULT '/sweetjo.txt' LOWER CASE.
START-OF-SELECTION.
CONCATENATE PATH AND FILE NAME INTO ONE VARIABLE
CONCATENATE P_PATH P_FNAME INTO V_FILEIN.
OPEN DATASET
IF V_FILEIN IS INITIAL.
MESSAGE E002 WITH 'FILE' V_FILEIN 'DOES NOT CONTAIN ANY DATA!'.
ELSE.
OPEN DATASET V_FILEIN
FOR INPUT
IN TEXT MODE.
IF SY-SUBRC = 0.
READ DATASET
DO.
READ DATASET V_FILEIN INTO I_ORDERS.
IF SY-SUBRC = 0.
APPEND I_ORDERS.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET
CLOSE DATASET V_FILEIN.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'ERROR - CLOSING' V_FILEIN.
ENDIF.
ELSE.
MESSAGE E002 WITH 'ERROR - COULD NOT OPEN' V_FILEIN.
ENDIF.
ENDIF.
SORT AND REMOVE DUPLICATES FROM I_ORDERS
SORT I_ORDERS BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM I_ORDERS.
POPULATE I_OUTPUT
LOOP AT I_ORDERS.
SHIFT I_ORDERS-POSNR LEFT DELETING LEADING SPACE.
CONCATENATE '0' I_ORDERS-POSNR INTO I_ORDERS-POSNR.
SELECT SINGLE BRGEW VOLUM
FROM VBAP
INTO (VBAP-BRGEW, VBAP-VOLUM)
WHERE VBELN = I_ORDERS-VBELN
AND POSNR = I_ORDERS-POSNR.
IF SY-SUBRC = 0.
IF VBAP-BRGEW = 0.
I_OUTPUT-CKWGT = 'X'.
ENDIF.
IF VBAP-VOLUM = 0.
I_OUTPUT-CKVOL = 'X'.
ENDIF.
I_OUTPUT-VBELN = I_ORDERS-VBELN.
I_OUTPUT-POSNR = I_ORDERS-POSNR.
I_OUTPUT-GEWEI = 'ST'.
I_OUTPUT-BRGEW = I_ORDERS-BRGEW.
I_OUTPUT-VOLUM = I_ORDERS-VOLUM.
APPEND I_OUTPUT.
CLEAR: I_OUTPUT.
ENDIF.
V_RECIN = V_RECIN + 1.
ENDLOOP.
POPULATE BAPI DATA AND RUN BAPI
CLEAR: ORDERHEADERINX, ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ORDERHEADERINX-UPDATEFLAG = 'U'.
LOOP AT I_OUTPUT WHERE CKWGT = 'X' OR CKVOL = 'X'.
V_RECVBAP = V_RECVBAP + 1.
IF I_OUTPUT-VBELN <> V_VBELN AND SY-TABIX <> 1.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
CLEAR: ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ENDIF.
ORDERITEMIN-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMIN-UNTOF_WGHT = I_OUTPUT-GEWEI.
IF NOT I_OUTPUT-CKWGT IS INITIAL.
ORDERITEMIN-GROSS_WGHT = I_OUTPUT-BRGEW.
ORDERITEMINX-GROSS_WGHT = 'X'.
ENDIF.
IF NOT I_OUTPUT-CKVOL IS INITIAL.
ORDERITEMIN-VOLUME = I_OUTPUT-VOLUM.
ORDERITEMINX-VOLUME = 'X'.
ENDIF.
APPEND ORDERITEMIN.
ORDERITEMINX-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMINX-UNTOF_WGHT = 'X'.
ORDERITEMINX-UPDATEFLAG = 'U'.
APPEND ORDERITEMINX.
V_VBELN = I_OUTPUT-VBELN.
ENDLOOP.
RUN BAPI ON LAST ORDER
IF NOT ORDERITEMIN IS INITIAL.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
ENDIF.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT FROM FILE ', V_RECIN.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF LINES TO CHANGE ', V_RECVBAP.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF ORDERS TO CHANGE ', V_RECORDER.
SKIP.
TOP OF PAGE
TOP-OF-PAGE.
WRITE:/1(5) TEXT-H01, 6(8) SY-DATUM MM/DD/YY,
100(8) TEXT-H02, 126(8) SY-PAGNO.
WRITE:/1(5) TEXT-H03, 6(8) SY-UZEIT USING EDIT MASK '__:__:__',
20(77) TEXT-H04,
100(8) TEXT-H05, 108(25) SY-REPID.
WRITE:/1(6) TEXT-H06, 8(12) SY-UNAME,
20(4) TEXT-H07, 25(32) SY-HOST,
100(13) TEXT-H08, 121(8) SY-SYSID,
129 '/', 130(3) SY-MANDT.
ULINE.
SKIP.
Reward points if useful
Regards
Anji -
Table cntrol field to be display/Change only For each record
Hi all,
How to set a particular Field in table control either as display only or
change only for <b>each row</b> based on certain condition.I need to set this property for each record in table control not for the entire coloumn?.I know the procedure for setting up an entire coloumn in table control either as diplay or change only using <b>Loop at screen</b> statement.
Conditions:
If Material is batch managed:
itab-batch field has to be <b>Display only</b> mode.
if material is not batch managed:
itab-batch field has to be <b>change mode</b>.
<b>O/p of Table Control :</b>
Material Batch
1000 Display only
2000 Change only
8000 Change only
3500 Display only
3600 Display onlyHi Ravi,
Thanks for your reply.I have put the code as u said. It is modifying the whole coloumn insted of modifying Current row of the coloumn.
I have tried to modify the screen property using Table control attributes (TC-COLS).The following commented code is that logic.Even that also doing the same thing.Can yoy please tell me how to do it.
MODULE tc_get_lines OUTPUT.
LOOP AT SCREEN.
IF screen-name = 'X_ZPINV-CHARG'.
IF fg_batch = ' '.
screen-input = 0.
ELSE.
screen-input = 1.
ENDIF.
ENDIF.
MODIFY SCREEN.
ENDLOOP.
LOOP AT tc-cols INTO tc_wa
WHERE screen-name = 'X_ZPINV-CHARG'.
IF x_zpinv-matnr IS NOT INITIAL.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = x_zpinv-matnr
IMPORTING
output = v_matnr.
SELECT SINGLE * FROM marc WHERE matnr = v_matnr
AND werks = w_plant.
IF marc-xchar IS INITIAL.
tc_wa-screen-input = 0.
ELSE.
tc_wa-screen-input = 1.
ENDIF.
MODIFY tc-cols FROM tc_wa INDEX sy-tabix." transporting screen-input
ENDIF.
ENDLOOP.
ENDMODULE. "TC_GET_LINES OUTPUT -
How to change the SID name in the server
hi all,
i installed oracle 10g R1 on windows 2003 server. i gave an sid and created a database. the database is new and there is no data in the db. now i want to change the SID name of the database. pls help me in doing this.
regards,
nagarjunaHi,
Just a notice: SID and DBNAME are two different things. But the usual practice is to have SID = DBNAME, so let me assume you want to change both SID and DBNAME.
Either you can do it manually by recreating the controlfile as orawiss suggests. You may discover some challenges around the way (for instance, for the command CREATE CONTROLFILE SET "new_dbname" to work, you have do delete or rename the old controlfiles first).
Or, you can change it easier by using nid utility. The detailed howto and all implications can be found on:
http://download.oracle.com/docs/cd/B14117_01/server.101/b10825/dbnewid.htm
Basically:
SQL> create pfile from spfile;
SQL> shutdown immediate;
nid TARGET=sys/password@oldname DBNAME=newname
copy the initoldname.ora to initnewname.ora and edit the DB_NAME parameter to reflect the new name
sqlplus / as sysdba
SQL> create spfile from pfile;
SQL>startup mount;
SQL> alter database open resetlogs;
Then don't forget to generate new password file for the new dbname (using orapw) and make changes in tnsnames.ora and listener.ora if needed.
Just make sure, the database has been properly shut down before changing the db_name either manualy by recreating controlfile or by the newid utility, as the renamed database has to be opened with resetlogs - making any crash recover of improperly shut down database impossible.
Kind regards,
Martin -
How to change only one attribute at the host
Hi experts,
we use host configuration with special host types. If we want to change only one attribute of the host with the cli we must change all attributes associates with the host. If we define only one new attribute all other values are set (back) to the default of the host type..
(in the gui all works fine...)
Is there a chance to change a only one attribute and keep all other attribute values of the host ?
Thanks,
ChrisNo, it is not possible to do that.
All attributes (passed via -attr) are treated as a single argument to the host modification (similar to a name or description). Essentially, when you provide a -attr argument to hdb.h.mod, the command will reset the existing overridden attributes and consider only the new attributes coming thorugh the -attr arg for overriding.
You see it working from the UI properly because, the UI requests for overriding all atributes once again, even though you manually changed only one attribute. -
I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
I use Keynote 09Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).
-
CLFMAS: Change only 1 caracteristic in a non-local material class
I try to modify a material's classification with CLFMAS.
I would like to change only one characteristic. The others ones must keep their old values.
CLFMAS erases everything, and I just have the new value of the caracteric I would change.
I use a non-local class.
Thanks in advance for your help.We have the same issue just come up last night. A test on one class last week yielded the 2 record change history model (old value deleted, new value created). Applying the same change to a different material class, we get only the single record model - no help or oss notes seem to mention that there are two different change history models in SAP.
CHECK THIS -- check your single record change log in table CDPOS ... you may have values in both value_old and value_new fields there. The 2 record model stores value_old on the "deleted" record and value_new field value on the "created" record.
That still does not answer why there are two models and how one controls which model is implemented for change history on a class/characteristic ... but it sheds just a little more light on it. -
How to change the SID for an existing system
Hi All,
I need to change the SID of the development and quality system without making a system copy.
The requirement is on strict timeline basis so I need to find out an alternate way to do it. A system copy will need a lot more time to do the same which is the last option at this time.
Please suggest.
Relevant answers will be rewarded accordingly.
Regards,
Himansu RoyDo not cross post same questino across different forums.
Changing the SID for existing SAP systems
Markus -
How to change the SID Oracle Database10g:Express Edition
I will like to know the process to change the SID in the database Oracle 10: Express Edition. Thanks in advance
if you have changed your SID to XE2 for example than change your tnsnames.ora accordingly :
(change service_name towards your new SID)
XE2 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE2)
)Edited by: Martijnke on Feb 7, 2009 12:30 PM -
Changing the side of dual monitors
Is there any way to change the side i can drag a window to my second monitor? I am running dual monitors, but i have to drag my window to the right to make it move to the monitor on the left hand side of my iMac. There is no way for me to move the second monitor to the other side of the desk. Is there an option to switch the sides of the dragging?
In the "Arrangement" tab of "Displays" system preference, drag the pictures of the displays to match the actual arrangement.
Maybe you are looking for
-
when trying to activate iCloud on iPhone and iPad I get "account not verified... check your email." Can't verify account on either device. Can't verify device on website either.
-
Can DW CS6 and CC run on the same computer (was: Dreamweaver ?)
I teach using CS 6 in my classroom, if my students download Dreamweaver CC can they work in both versions or will this cause an issue.
-
[SIMGH] Reference a Database view
Hi, I am using transaction SIMGH for creating a new customer node. I would like to reference a <b>database view</b> in it. I know how to reference maintenance view but the problem with DB view is that they do not have a SOBJ record. Is there a possib
-
I am having problems updating iTunes to version 10.5 - is anyone else having the same problem and does anyone know how to get around it? I have downloaded the new software, both through iTunes letting it do it's own upgrade and also manually trying t
-
DESCRIBE TABLE or similar to get number and name of a table fields
Hi experts, I want to use a sentence to get the number and name of the fields contained on a table or structure, and i cannot use DESCRIBE TABLE. I cannot find a way to get that info, does anybody know a sentence or method/funcion for this? Thanks!!!