Change only the Netmask of private interconnect 11g RAC 2
Hi,
I want to change only the netmask of private interface in 11.2.0.3 RAC.
e.g.
IPADDR=169.254.0.1
NETMASK=255.255.128.0
to
IPADDR=169.254.0.1
NETMASK=255.255.0.0
Do I have to run any oifcfg commands?
Regards,
Zubair
Hi,
Check this note :
How to Modify Private Network Information in Oracle Clusterware (Doc ID 283684.1)
Topic: Changing private network interface name, subnet or netmask
Similar Messages
-
I did a presentation with many images and animations, now I need to change only the images without modify the related animations. How can I do it?
I use Keynote 09Select the image you want to change and go to Format Menu>Advanced>Define as Media Placeholder (or command, option, control i).
-
I would like to set up an older iPad with a new messages account so it can be used by my kids. I don't, however, want to lose the apps or music that are on the iPad. Can I change only the Messages "account"?
Thanks. I had tried that, but was still having problems. Then I realized that I was using three addresses on both devices. Once I changed it to only one email on one iPad and a different email on the other, it worked great. Your message encouraged me to dig deeper and think differently. It worked. Thanks again!
-
In Numbers, how can i change only the year in a date formatted column of data?
I'm using Numbers 3.5.2 on an iMac running Yosemite 10.10.2.
This column is a listing of dates tied to info that needs to happen on a particular date each year. Rather than re-key all the dates so the year advances to 2015, it would be great if I could change just the year for the entire column, leaving the day and month intact.
Thanks in advance for your help.If you already have a column of dates, and just want change the year in the entire column, rather than reenter the dates, then you could use a formula something like this:
The formula in B2, copied down the column:
=DATE(YEAR(A2)+1,MONTH(A2),DAY(A2))
Then select the new column, command-c to copy, and Edit > Paste Formula Results. The original column can then be deleted.
SG -
How do i Change only the Installation No from Visual Admin
Hello All,
As my license key for the NWDS expiry's after every 15Days. I have got a new license key but i need to change the Installation No of my older license in order to update it with the new one. or keep it running always with out any expiry.could you suggest what to do.......
Regards,
karthikEric:
Thanks so much! Actually, after I posted this question, I figured it out after much trial and error, plenty of both, and it does work. But your answer confirms for me the path I took. -
Change only the format of similar text?
Hi All,
I am trying to change the formatting of similar text.
e.g.
I have R-6-6 (more like this where the number change) that is light and I want to make it regular.
I want to change all similat items aswell, so R-4-11 and R-5-3 and so on.
I thought wildcards would do it but it doesn't. Atleast I am not getting it to work.
Thanks.
Kevin JOK, that doesn't match the example above. if you are going to have single or multiple digits in both positions you can use \b\u-\d+-\d+ this will find any uppercase-hyphen-one or moredigits-hyphen-one or more digits string with a space or line break in front of it.
-
P.O change if i change only screen exit field the data is not saving
Hi ,
In the purchase order header custom tab i am added a screen exit field .In the purchase order creation mode the screen exit field is saving.But in the change mode if i am changing only the screen exit field then it is showing as 'no data to save' and not saving .But at the same time if i am changing some standard field with the screen exit field then both the field is saving.
I have to activate any field to save the screen exit field.Please let me know any exit to be activated for saving the data.
With Regards,
AmbroseHi
Pls keep a break-point in the PAI of Screen exit and check, whether it stops in change mode
Regards
Madhan D -
RAC 11R2 Private Interconnect Issue
Friends
We had setup our Oracle Clusterware on Solaris Sparc with a version 11.2.0.3 PSU 2 patch sets. Some changes happen at the OS level and the private Interconnect IPs were picked wrong by our Oracle Clusterware registry.
The clusterware is down. We are not able to bring up the clusterware. There will be a need to change the private IP configuration at the Oracle Clusterware level and now the clusterware is down.
Is there any way we can change the configuration in private Interconnect ?
Whenever we are trying to do a change. Getting the error message "PRIF-10: failed to initialize the cluster registry"
$ oifcfg setif -global vnet2/10.131.239.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registry
Thank You !
JaiThe clusterware is down. We are not able to bring up the clusterware. There will be a need to change the private IP configuration at the Oracle Clusterware level and now the clusterware is down.
Is there any way we can change the configuration in private Interconnect ?
Whenever we are trying to do a change. Getting the error message "PRIF-10: failed to initialize the cluster registry"
$ oifcfg setif -global vnet2/10.131.239.0:cluster_interconnect
PRIF-10: failed to initialize the cluster registryThis error happen when clusterware is down and you are trying to change Interconnect configuration, then you must start the Oracle Clusterware on the node to make changes.
We are not able to bring up the clusterware. Some changes happen at the OS level and the private Interconnect IPsWhy you clusterware is not starting?...please post alertlog and crsd.log of cluster (only relevant info).
If the error on crsd.log is : PROC-44: Error in network address and interface operations Network address and interface operations error
This errors indicate a mismatch between OS setting (oifcfg iflist) and gpnp profile setting profile.xml.
You will restore the OS network configuration back to the original status, start Oracle Clusterware. Then try make the changes again. -
Oracle Cluster private Interconnect
What are the different speeds and technologies that we can configure the oracle private interconnect for RAC 11g?
ghd wrote:
What are the different speeds and technologies that we can configure the oracle private interconnect for RAC 11g?The recommended technology (looking at what Oracle's Database Machine uses) is QDR (Quad Data Rate/40Gbs) Infiniband, using the RDS (Reliable Datagram Sockets). This provides (according to Oracle testing), a 50% faster cache-to-cache block throughput with 50% less CPU time - in comparison to using UDP as the RAC Interconnect wire protocol.
Oracle presented these results to the Infiniband/OFED members in a presentation called Oracle’s Next-Generation Interconnect Protocol (PDF).
The Infiniband roadmap shows that the NDR (Next Data Rate) will scale to 320Gb/s.
There is absolutely nothing I have seen from the Ethernet vendors that show GigE matching Infiniband.
From Top 500, listing the biggest and fastest 500 clusters on this planet, Infiniband has a 41.8% market share, in comparison with the 41.4% share of GigE.
Compare this to 2005 (when we first got Infiniband for RAC). Back then Infiniband had a 3.2% market share. GigE had a 42.8% share. So there has been an incredible growth in using Infiniband as Interconnect - unlike GigE that has been stagnant and now is the 2nd place as top500 Interconnect family architecture.
What is needed for using Infiniband for Oracle RAC? A HCA (Host Channel Adapter) card for each RAC server (high speed PCI cards, dual port). An Infiniband switch (2 ports per RAC server needed). And cables of course. All these are sold by most server h/w vendors. Costs are quite comparable to 10Gb/s GigE (and even cheaper) in my experience. -
How can I move an event in my calendar to my "completed" calendar without changing all the events in the series?
As Apple has yet to upgrade iCalendar so I can check off my events as I complete them (no, I do not want to use a task list/reminder list), I want to be able to move my events to my "completed" events calendar as I complete them. The issue is that most of my events are repeating events, and it changes the entire series. How do I change only the event I clicked on using my iPhone?
ThanksIf you change anything in a repeating calendar entry it will give you the option of disconnecting it from the series. So may any random change, choose to not change the series.
-
Change only material qunatity in sales order by using BAPI
Hi All,
How to change only the material quantity in existing sales order by using BAPI.
Please help me in this regards.
Regards
Deekshitha.Hi
See the sample code and do accordingly
REPORT Z_SALES_ORDER_CHANGE
NO STANDARD PAGE HEADING
LINE-SIZE 132
LINE-COUNT 65(0)
MESSAGE-ID ZZ.
TABLES: VBAP.
DATA:
V_FILEIN(90) TYPE C,
V_RECIN TYPE I,
V_RECVBAP TYPE I,
V_RECORDER TYPE I,
V_VBELN LIKE VBAP-VBELN,
ORDERHEADERINX LIKE BAPISDH1X.
DATA: BEGIN OF I_ORDERS OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
BRGEW(18) TYPE C,
VOLUM(18) TYPE C,
END OF I_ORDERS.
DATA: BEGIN OF I_OUTPUT OCCURS 0,
VBELN LIKE VBAK-VBELN,
POSNR LIKE VBAP-POSNR,
GEWEI LIKE VBAP-GEWEI,
BRGEW LIKE VBAP-BRGEW,
VOLUM LIKE VBAP-VOLUM,
CKWGT TYPE C,
CKVOL TYPE C,
END OF I_OUTPUT.
DATA: BEGIN OF ORDERITEMIN OCCURS 0.
INCLUDE STRUCTURE BAPISDITM.
DATA: END OF ORDERITEMIN.
DATA: BEGIN OF ORDERITEMINX OCCURS 0.
INCLUDE STRUCTURE BAPISDITMX.
DATA: END OF ORDERITEMINX.
DATA: BEGIN OF RETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF RETURN.
DATA: BEGIN OF BAPIRETURN OCCURS 0.
INCLUDE STRUCTURE BAPIRET2.
DATA: END OF BAPIRETURN.
PARAMETERS:
P_PATH(45) TYPE C DEFAULT '/usr/users/ftpsapom/' LOWER CASE,
P_FNAME(32) TYPE C DEFAULT '/sweetjo.txt' LOWER CASE.
START-OF-SELECTION.
CONCATENATE PATH AND FILE NAME INTO ONE VARIABLE
CONCATENATE P_PATH P_FNAME INTO V_FILEIN.
OPEN DATASET
IF V_FILEIN IS INITIAL.
MESSAGE E002 WITH 'FILE' V_FILEIN 'DOES NOT CONTAIN ANY DATA!'.
ELSE.
OPEN DATASET V_FILEIN
FOR INPUT
IN TEXT MODE.
IF SY-SUBRC = 0.
READ DATASET
DO.
READ DATASET V_FILEIN INTO I_ORDERS.
IF SY-SUBRC = 0.
APPEND I_ORDERS.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET
CLOSE DATASET V_FILEIN.
IF SY-SUBRC <> 0.
MESSAGE E002 WITH 'ERROR - CLOSING' V_FILEIN.
ENDIF.
ELSE.
MESSAGE E002 WITH 'ERROR - COULD NOT OPEN' V_FILEIN.
ENDIF.
ENDIF.
SORT AND REMOVE DUPLICATES FROM I_ORDERS
SORT I_ORDERS BY VBELN POSNR.
DELETE ADJACENT DUPLICATES FROM I_ORDERS.
POPULATE I_OUTPUT
LOOP AT I_ORDERS.
SHIFT I_ORDERS-POSNR LEFT DELETING LEADING SPACE.
CONCATENATE '0' I_ORDERS-POSNR INTO I_ORDERS-POSNR.
SELECT SINGLE BRGEW VOLUM
FROM VBAP
INTO (VBAP-BRGEW, VBAP-VOLUM)
WHERE VBELN = I_ORDERS-VBELN
AND POSNR = I_ORDERS-POSNR.
IF SY-SUBRC = 0.
IF VBAP-BRGEW = 0.
I_OUTPUT-CKWGT = 'X'.
ENDIF.
IF VBAP-VOLUM = 0.
I_OUTPUT-CKVOL = 'X'.
ENDIF.
I_OUTPUT-VBELN = I_ORDERS-VBELN.
I_OUTPUT-POSNR = I_ORDERS-POSNR.
I_OUTPUT-GEWEI = 'ST'.
I_OUTPUT-BRGEW = I_ORDERS-BRGEW.
I_OUTPUT-VOLUM = I_ORDERS-VOLUM.
APPEND I_OUTPUT.
CLEAR: I_OUTPUT.
ENDIF.
V_RECIN = V_RECIN + 1.
ENDLOOP.
POPULATE BAPI DATA AND RUN BAPI
CLEAR: ORDERHEADERINX, ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ORDERHEADERINX-UPDATEFLAG = 'U'.
LOOP AT I_OUTPUT WHERE CKWGT = 'X' OR CKVOL = 'X'.
V_RECVBAP = V_RECVBAP + 1.
IF I_OUTPUT-VBELN <> V_VBELN AND SY-TABIX <> 1.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
CLEAR: ORDERITEMIN, ORDERITEMINX,
RETURN, BAPIRETURN.
REFRESH: ORDERITEMIN, ORDERITEMINX, RETURN, BAPIRETURN.
ENDIF.
ORDERITEMIN-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMIN-UNTOF_WGHT = I_OUTPUT-GEWEI.
IF NOT I_OUTPUT-CKWGT IS INITIAL.
ORDERITEMIN-GROSS_WGHT = I_OUTPUT-BRGEW.
ORDERITEMINX-GROSS_WGHT = 'X'.
ENDIF.
IF NOT I_OUTPUT-CKVOL IS INITIAL.
ORDERITEMIN-VOLUME = I_OUTPUT-VOLUM.
ORDERITEMINX-VOLUME = 'X'.
ENDIF.
APPEND ORDERITEMIN.
ORDERITEMINX-ITM_NUMBER = I_OUTPUT-POSNR.
ORDERITEMINX-UNTOF_WGHT = 'X'.
ORDERITEMINX-UPDATEFLAG = 'U'.
APPEND ORDERITEMINX.
V_VBELN = I_OUTPUT-VBELN.
ENDLOOP.
RUN BAPI ON LAST ORDER
IF NOT ORDERITEMIN IS INITIAL.
V_RECORDER = V_RECORDER + 1.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
SALESDOCUMENT = V_VBELN
ORDER_HEADER_INX = ORDERHEADERINX
TABLES
RETURN = RETURN
ORDER_ITEM_IN = ORDERITEMIN
ORDER_ITEM_INX = ORDERITEMINX.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT = 'X'
IMPORTING
RETURN = BAPIRETURN.
WRITE OUT RETURN
LOOP AT RETURN.
WRITE: / RETURN.
ENDLOOP.
WRITE: / BAPIRETURN.
SKIP.
ENDIF.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT FROM FILE ', V_RECIN.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF LINES TO CHANGE ', V_RECVBAP.
SKIP.
WRITE OUT RECORD COUNT FROM FILE
WRITE: / 'RECORD COUNT OF ORDERS TO CHANGE ', V_RECORDER.
SKIP.
TOP OF PAGE
TOP-OF-PAGE.
WRITE:/1(5) TEXT-H01, 6(8) SY-DATUM MM/DD/YY,
100(8) TEXT-H02, 126(8) SY-PAGNO.
WRITE:/1(5) TEXT-H03, 6(8) SY-UZEIT USING EDIT MASK '__:__:__',
20(77) TEXT-H04,
100(8) TEXT-H05, 108(25) SY-REPID.
WRITE:/1(6) TEXT-H06, 8(12) SY-UNAME,
20(4) TEXT-H07, 25(32) SY-HOST,
100(13) TEXT-H08, 121(8) SY-SYSID,
129 '/', 130(3) SY-MANDT.
ULINE.
SKIP.
Reward points if useful
Regards
Anji -
Changing of the physical file name of the file after archiving
Hi all,
We are in process of archiving and completed the process successfully and archived to o:\PRODSID\<filename>.
When refresh is happening from Prod to Quality the archived data will come as O:\PRODSID\<filename> and the archived files will not be accessible since quality system is not able to find the path with O:\PRODSID\<filename>.
Is there anyway i can change the physical file name of the archived files to correct path O:\QUALITYSID\<filename>, i need to change only the SID only from PRD to QUALITY.
Thanks,
Subhash.GHi Subash,
Do you want change the Physical File name or the Path from PROD to SID.
Path :- in the transaction called FILE, double click on Logical Path Definition , select the Logical File and double click on "Assignment on Physical Path to Logical Path" and you can change FILENAME also here
Thanks,
Sravanthi -
Gig Ethernet V/S SCI as Cluster Private Interconnect for Oracle RAC
Hello Gurus
Can any one pls confirm if it's possible to configure 2 or more Gigabit Ethernet interconnects ( Sun Cluster 3.1 Private Interconnects) on a E6900 cluster ?
It's for a High Availability requirement of Oracle 9i RAC. i need to know ,
1) can i use gigabit ethernet as Private cluster interconnect for Deploying Oracle RAC on E6900 ?
2) What is the recommended Private Cluster Interconnect for Oracle RAC ? GiG ethernet or SCI with RSM ?
3) How about the scenarios where one can have say 3 X Gig Ethernet V/S 2 X SCI , as their cluster's Private Interconnects ?
4) How the Interconnect traffic gets distributed amongest the multiple GigaBit ethernet Interconnects ( For oracle RAC) , & is anything required to be done at oracle Rac Level to enable Oracle to recognise that there are multiple interconnect cards it needs to start utilizing all of the GigaBit ethernet Interfaces for transfering packets ?
5) what would happen to Oracle RAC if one of the Gigabit ethernet private interconnects fails
Have tried searching for this info but could not locate any doc that can precisely clarify these doubts that i have .........
thanks for the patience
Regards,
NileshAnswers inline...
Tim
Can any one pls confirm if it's possible to configure
2 or more Gigabit Ethernet interconnects ( Sun
Cluster 3.1 Private Interconnects) on a E6900
cluster ?Yes, absolutely. You can configure up to 6 NICs for the private networks. Traffic is automatically striped across them if you specify clprivnet0 to Oracle RAC (9i or 10g). That is TCP connections and UDP messages.
It's for a High Availability requirement of Oracle
9i RAC. i need to know ,
1) can i use gigabit ethernet as Private cluster
interconnect for Deploying Oracle RAC on E6900 ? Yes, definitely.
2) What is the recommended Private Cluster
Interconnect for Oracle RAC ? GiG ethernet or SCI
with RSM ? SCI is or is in the process of being EOL'ed. Gigabit is usually sufficient. Longer term you may want to consider Infiniband or 10 Gigabit ethernet with RDS.
3) How about the scenarios where one can have say 3 X
Gig Ethernet V/S 2 X SCI , as their cluster's
Private Interconnects ? I would still go for 3 x GbE because it is usually cheaper and will probably work just as well. The latency and bandwidth differences are often masked by the performance of the software higher up the stack. In short, unless you tuned the heck out of your application and just about everything else, don't worry too much about the difference between GbE and SCI.
4) How the Interconnect traffic gets distributed
amongest the multiple GigaBit ethernet Interconnects
( For oracle RAC) , & is anything required to be done
at oracle Rac Level to enable Oracle to recognise
that there are multiple interconnect cards it needs
to start utilizing all of the GigaBit ethernet
Interfaces for transfering packets ?You don't need to do anything at the Oracle level. That's the beauty of using Oracle RAC with Sun Cluster as opposed to RAC on its own. The striping takes place automatically and transparently behind the scenes.
5) what would happen to Oracle RAC if one of the
Gigabit ethernet private interconnects fails It's completely transparent. Oracle will never see the failure.
Have tried searching for this info but could not
locate any doc that can precisely clarify these
doubts that i have .........This is all covered in a paper that I have just completed and should be published after Christmas. Unfortunately, I cannot give out the paper yet.
thanks for the patience
Regards,
Nilesh -
Layout changes removes the data
HI,
We copied a standard program RIAUFK20, the program shows the ALV output . We changed only the fieldcatalog. The problem is when the program shows the output first time it shows the correct data what we added to the standard one. When user changes the layout and the screen refreshes it wipes out the data that we added to the report. How can it be prevented from being removed?
Thanks in advanceSanjane:
You will also need to modify the layout sets saved for that report; the existing layouts will not take into account your changes to the field catalog & data.
If using ALV grid (function group SLVC_FULLSCREEN) have a look at function modules REUSE_ALV_GRID_LAYOUT_INFO_GET & REUSE_ALV_GRID_LAYOUT_INFO_SET. If using ALV list (function group SALV) have a look at function modules REUSE_ALV_LIST_LAYOUT_INFO_GET & REUSE_ALV_LIST_LAYOUT_INFO_SET. For all of these function modules, click on "Function Module Documentation" button to see the on-line documentation. You can also find documentation on help.sap.com.
Regards,
D. -
Change only first letter to uppercase
Hello,
Have a way in graphical mapping to change only the first letter to uppercase?
Eladhi,
Please do the following mapping. hope this will help you.
input-->SUBSTRING1>uppercase-->Firstinput to concate function
CONCATE----
>output
input-->SUBSTRING2--->second input to concatefunction
Set Substring1: starting position=0 and numberof chareters =1
set Substring2 :starting position=1 and numberof chareters =0
regards
Kasturika
Maybe you are looking for
-
Blue screen when connected to pc
when I connect my iPhone 4 via usb to my pc (hp pavilion dv4000, windows xp home), instantly blue screen appears! can anyone help me?
-
How do I get my iPod touch 4th gen to a ios 6.1.4
My iPod touch 4th gen is at ios 6.1.3 and I want to know when I can update it to a ios 6.1.4
-
G/L accounts for TAX in FTXP and OB40
Hi, It i s possible to assign G/L accounts in FTXP and OB40. Is it possible to block this option in FTXP? The reason is that they are change VAT codes / assign G/L accounts on the different locations. On our location we change it in OB40 for the rea
-
HT2433 error code -42110 does anyone know what this means?
When I switch itunes on I get the error code above - can anyone help?! Thanks Bis 04
-
Pairing with a Bluetooth Headset
I have a Curve 8530 ... the BB can't find my fully-charged Plantronics 520 headset when I go through the Bluetooth Setup page. Is there something I'm missing or not doing? Solved! Go to Solution.