Change or append message when approving directly from approval Inbox

Hi All,
I have a custom requirement to provide additional messages during approval of Shopping Cart and change the required on dates during approval of shopping cart.
This has been acheived by using enhancments in BBP_DOC_CHANGE_BADI, when the approver goes to the details of the Shopping Cart and then approves the same. But I am facing  issue to append a pop-up message and makes changes to delivery date of the Shopping Cart when the approver tries to directly approve it from the approval inbox without gettign into the detail view of the shopping cart. The BAdi BBP_DOC_CHANGE_BADI is not activated at that time.
I have tried BBP_WFL_APPROV_BADI, but that is not effective. I am trying to work with implicit enhancement points in the program BBP_BACKGROUND_APPROVAL. Albeit, I am looking for a better solution instead of forcing code in implicit enhancement point.
Best regards
Indrajit

Hi,
How about deactivating direct approve button.
There is customizing "Determine Dynamic Columns for Business Workplace" in SRM 5.0 and old version.
Regards,
Masa

Similar Messages

  • CS5: Bug when exporting directly from PPro with hardware MPE?

    For the record, I'm using:
    A GTX-480 (unsupported)
    The hardware MPE-enabling hack (unsupported)
    The latest version of the nVidia drivers (257.whatever)
    I discovered an issue, of sorts, when exporting directly from Premiere CS5, versus using the "Queue" option to send to AME. I was exporting from an NTSC DV Standard sequence to a 320x240 H.264, in which I had enable cropping and trimmed a bit off the sides and top and bottom of the source; the Output tab was summarily set to "Scale to Fit". With hardware MPE enabled in the Project Settings, the export would be the proper final dimensions (320x240), but any area that was cropped off was instead padded with black. The actual video content was then squeezed and malformed into the area not occupied by the black bars.
    I found that, if I disabled hardware MPE or sent the export through AME by use of the Queue button (instead of Export), then the export was performed properly--the video was cropped correctly and then the video stretched to the borders of the exported video, maintaining the desired aspect ratio.
    As I mentioned at the outset, I'm breaking a couple rules and perhaps tempting fate with others, but before I go about rolling back my drivers and the like, has anyone noticed a similar issue?
    ADDENDUM: By the way, the export doesn't need to come from a sequence. If I load up a source clip into the Source Monitor, and export from there using the process outlined above, I get the same issue. This would seem to indicate, to me, that this is due to some incompatibility with my card, its driver and hardware MPE...

    Did he demo renders or exports?
    About 11 minutes in, he [Dave] demos accelerated H.264 renders.
    Harm Millaard wrote:
    AFAIK MPE only works with renders, not with encoding.
    Well, he did both, actually--but the quote above is a typo on my part. I meant to say "exports" or "encodes." The last couple minutes of the aforementioned demo video are dedicated to exporting a sequence directly from Premiere, and having the benefit of hardware MPE. That's where I'm getting the issue I've outlined above; with hardware MPE enabled, and using the "Export" versus AME "Queue" button/function, I get the strange black outline. With software MPE or through AME, all is well.

  • Load x# of messages when sending email from my pop account

    Hi
    I'm getting a "load x# of messages" when sending email from any address on my pop account. No problem receiving messages from other accounts. Is there a setting that can remedy this?
    Thanks

    My z10 is going back today, for multiple reasons
    Contacts won't sync across
    Won't work properly with my car when all previous BBs did
    Lots of useful features have disappeared
    But most importantly NONE of my email accounts will send mail from it when they all did previously with the Storm2.
    A big thumbs down from me for the z10 even if it is a fancy looking phone and the browser is much better. I stuck with BB because I wanted a tool not a toy

  • AME Invoice workflow - When invoice moves from Approval Require to Not Req

    Hello,
    I have a small Issue with AP Prepayment invoice Workflow.Version: 12.1.1
    Issue Des:AME has been configured specifically for Prepayment invoices. however, when Initiate Workflow is clicked, the Approval status changes from Required to Not Required (instead of Initiated).
    AME Setup:
    1.IF supplier amount > O get approval from approval-grp.
    Steps:
    1.Create a invoice with amount 1000 and distributions with 1000 amount.
    2.Validate Invoice
    3.Intiate Approval using actions "Intaiate Approval" the Approval status changes from Required to Not Required (instead of Initiated).
    4.Invoice shows status 'Not Required'
    5. first time the customer was using AME Rule for Prepayment invoice type with approver type as HR People and In the employee form, the supervisor relationship was not defined.
    Any idea on why this is not working will be of great help!
    Regards,
    Venkat

    HI Venkat,
    Check the AME rules, Is the Priority filed have any values set or not.
    The Priority must be set to 1 and try again.
    Regards,
    Sunil

  • Error Message When Importing Bookmarks From A Network Share

    An error message is generated whenever I try to import bookmarks.html from a network share on kubuntu. This same operation is sucessful on the windows version of firefox.
    To replicate:
    The bookmarks.html is created by Firefox 3.68 on windows 7. And is saved to a network share location. When trying to import this file into firefox 3.6.8 on my kubuntu 10.04 machine, I get the error message/window titled: remote files not accepted. The message states: You can only select local files.
    If I copy bookmarks.html local to the kubuntu machine, it imports without error.
    On windows, I can import bookmarks.html from the network share without error.
    Does anyone know why I can't import across the network on the kubuntu version?
    browser being run on windows 7:
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.8) Gecko/20100722 Firefox/3.6.8
    browser being run on kubuntu 10.04:
    Firefox 3.6.8 Mozilla Firefox for Ubuntu canonical - 1.0.

    It appears to be any remote file, not just the bookmarks file. When trying to upload a file to a website, firefox threw up the same error:
    error message/window titled: remote files not accepted. The message states: You can only select local files.
    So what is it about files that are sitting on a server, firefox and kubuntu that causes this? I don't get the error message when using win7 on the same files.

  • Error message when donloading images from camera....?!?!?

    I have been trying to import images from my Canon Rebel digital camera and am having some issues. I was having trouble with iPhoto which is why I purchased this great program. At first, the images were downloading fast and furious with Aperture but now I am having some of the same issues that I was having with iPhoto. It is taking forever and a day to import my RAW images and now I am getting an error message with almost all of my photos. It stalls out on them (and the red light stops flashing on my camera as if they aren't communicating) and then I get the message that there was "a problem downloading that image" and this error code: (ICA download error -609).
    This is extremely frustrating!! HELP!
    iMac   Mac OS X (10.4.6)  
    iMac   Mac OS X (10.4.6)  

    You're loading straight off the camera?
    Be sure the camera isn't shutting itself off in the middle of the transfer. It may auto-turn-off after a minute.
    I'd really suggest you use a card reader. You can get a USB2 CF reader which will be 10x faster than direct camera download for like $20. I can't fathom why anyone would use direct-from-camera in lieu of a reader, unless they were doing tethered shooting.

  • HP Laserjet 1018-script error message when I print from web sites

    I have a HP Laserjet 1018. When I print from Microsoft products, it prints fine. However, when I try to print from a web site, it gives me an error message stating that there  is a script error.

    Its some PDF files, it prints using Adobe on a Windows OS just fine, but not in adobe on the Mac. It prints using preview but all the fine details of the picture does not print. One file that does not print is a drawing generated from AutoCAD.

  • McAfee Siteadvison 3.1 warns that FF 3.6.8 has problems when downloading directly from Mozilla

    FF 3.6.7 popped up a download msg telling me that 3.6.8 was avaliable to correct problems. The update seemed to go as expected, but when I opened the new version and went directly to Mozilla to download a copy of the program from there, McAfee's Siteadvisor 3.1 popped up a warning that the download contained suspicious content.
    == This happened ==
    Just once or twice
    == I downloaded FF 3.6.8 directly from the Mozilla web site

    Mary,
    See McAfee about an update for that extension.
    John,
    Probably a false positive, due to McAfee not being ready for the Firefox update. If they took the time to keep up with impending Firefox updates, they could avoid inconveniencing their customers.

  • Error Message when creating file from INDCS3 files

    Running, Windows XP, Creative Suite CS3,, Acrobat 8 Pro, and all updates. Unable to create a PDF using the "mulitple files" selection and selecting INDCS3 files on a server, receiving the following error:
    -----Invalid value for parameter 'using" of event 'exportFile'. Expected PDFExportrPreset, but received "standard". Files all open in InDesignCS3, but no PDF file is created. Able to create PDFs directly from IND without any problems.----
    Was able to handle this function in CS2 without any problems. Can you tell me where we are going wrong?
    KEN PANTHEN, Albany, NY

    does it happen with local indesign files, or just those on that (particular) network?

  • Approver has to approve twice from the inbox

    Hi,
    We are in SRM 5.0 SP14, extended classic deployment. We are currently
    facing an issue with the approvals. Approver has to approve the item
    twice from his inbox. First time if you approve, the item doesn't move
    from the inbox. Second time if the same item is approved, it gets moved
    from the inbox. We applied a note (1284516- Work items executed twice
    via inbox), even after that the system behaviour is same.
    Although it is not the same behaviour always, sometimes the item gets
    executed in the first try.
    Regards
    Kapil

    Hi Kapil,
    Please check if index value of approver is maintained correctly. Sometimes if you remove an approval step from your workflow coding, there is an index value which also needs to be updated. If you have not maintained it correctly, it will require tow approve same item twice.
    Thanks,
    Anshuk Saxena

  • Change screen resolution message when trying to start media manager

    I use a UMPC (Samsung Q1UP) that only has a screen resoluion opion of 1024 x 600 as it is a 7" landscape mobile computer. When I start up the blackberry software, and then try to launch Media Manager etc., it gives me an error message to change the screen resolution to at least 1024 x 768 or higher.
    As I cannot change the screen resolution to accomodate the software request, has anyone come up with a fix for this issue?
    Thanks in advance!

    This is the part of technology I hate with a passion. When new products come out, companies have no idea what to do when compatibility issues arise and they leave millions of people in the dark.
    Blackberry charges for support if you call them direct (imbecilic policy in my opinion).  You have to go through AT&T to get support from Blackberry for free.  (I believe the Curve phone has an inactivated price of $699, you would think Blackberry would want to talk directly to their customers for free, but no!)
    I spent 20 minutes on the phone with AT&T to explain the issue I was having.  After convincing them I know what I am doing, they put me through to Blackberry support tech, where I had to repeat the issue over again.
    After spending another 40 minutes with a junior, then senior Blackberry tech, their solution was for me to plug in an external monitor and set it to 1024X768 so the Roxio Media Manager comes up.
    This is imbecilic as well, as the whole purpose for this netbook is so that I don't have to have to lug around a monitor with me, otherwise with the netbook and the monitor I am way over 7 lbs. 
    There was another person in this forum who recommended installing an older Desktop manager software without the media manager product on my PC to allow me to access the files directly.  Although this works for a media card, it DOESN'T work for the internal memory in the phone.   The internal memory in the phone appears to be locked up tight and only accessible to the media manager, or Bluetooth.  I did manage to get the files off via Bluetooth ONE FILE AT A TIME!  took me nearly 2 hours.
    My suggestions to Blackberry:
    1) Scrap Roxio Media Manager.  Most people who use this phone know what they are doing and understand how to drag and drop files from a disk drive to a computer.  Roxio Media Manager should not be necessary to get files off of a phone.
    2) Open up the internal memory inside the phone so it comes up as a disk drive on the computer.
    3) or - Do something else to make this work with Netbooks!
    Message Edited by diode on 04-09-2009 11:36 AM
    [email protected]

  • Prevent the Output Message when creating PO from inbound IDOC

    Hi SAP Gurus,
    In my project, I have to create PO from inbound IDOC (PORDCR) with a specific Document Type ('099').
    Requirement: These PO should not generate the output message while the others (Doc Type # '099') do.
    I have the Z fuction module which call BAPI_PO_CREATE for posting IDOC and it works fine.
    In the existing system, there are some set up that trigger the output message type for PO (output NEU) when using ME21 or ME22, as a result my PO created with output message.
    Can you please advise if there are some way (User Exit?) that prevent the output message in this scenario (specific PO Type) without touching the current Condition setup?
    I'm new in MM and really need help!
    Thanks,
    Elaine.

    Hi Vinod,
    I really appreciate your anwer. I'm going to explore this with my functional consultant.
    Just like to have more questions:
    1. Is it easier if we change the existing condition table instead of creating a new routine?
    2. There are two forms for routine 101 (FORM KOBEV_101 and FORM KOBED_101). Can you explain to me why we need 2 here for what purpose of each form.
    3. In the debug mode by using WE19 to post inbound IDOC, I change the SY-SUBRC = 4 and PO created without output message. Is it the right direction? Anything else I need to pay attention to?
    Thanks again.
    Regards,
    Elaine.

  • Adobe Form output cropped when sent directly from SAP to printer

    I have created an Adobe Form (not interactive) that looks perfectly OK when previewed in Adobe Acrobat viewer but when printed blank margins of 4-5 millimeters are applied on all 4 paper edges. The form was designed with a coloured frame around it but the margins effectively remove most of the frame. The form content is being cropped instead of being compressed inside the margins.
    The form has been created with LiveCycle Designer via SAP transaction SFP. I am generating the form from an ABAP program
    When the form is printed from the Adobe Acrobat viewer I have the option to set Page Scaling to 'Fit to Printable Area'. This makes the form content being compressed inside the blank margins and the coloured frame remains intact. If I leave the Page Scaling setting as 'None' the output is being cropped as described above.
    The real problem occurs when I want to print without previewing first. I need to do that since previewing enables the user to skip printing and the application must know if the form has been printed or not. I have so far found no way to make the printer print on the paper edges or fit the content to printable area. Is there some setting in the output parameters than handles this?
    Also there is a need for duplex printing when sending form directly to printer. On help.sap.com there is information about duplex print for SAPscript and Smartforms but nothing for Adobe Forms.
    Here is an excerpt of the ABAP code used for printing the Adobe Form:
      DATA: zs_outparams TYPE sfpoutputparams,
                 z_fmname     TYPE rs38l_fnam.
    Set some print parameters
      zs_outparams-nodialog = abap_true.        "No user dialog
      zs_outparams-device   = 'PRINTER'.          "Output device
      zs_outparams-dest     = z_pdest.              "Printer name
      zs_outparams-reqnew   = abap_true.        "New spool request
      zs_outparams-reqimm   = abap_true.        "Print immediately
    Open print job
      CALL FUNCTION 'FP_JOB_OPEN'
        CHANGING
          ie_outputparams = zs_outparams
        EXCEPTIONS
          cancel          = 1
          usage_error     = 2
          system_error    = 3
          internal_error  = 4
          OTHERS          = 5.
      IF sy-subrc <> 0.
        RAISE print_error.
      ENDIF.
    Get FM name for form
      CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
        EXPORTING
          i_name     = 'Z_TEST_FORM'
        IMPORTING
          e_funcname = z_fmname.
    Call FM to print form
      CALL FUNCTION z_fmname
        EXPORTING
          i_header       = t_data_for_form
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        RAISE print_error.
      ENDIF.
    Close print job
      CALL FUNCTION 'FP_JOB_CLOSE'
        EXCEPTIONS
          usage_error    = 1
          system_error   = 2
          internal_error = 3
          OTHERS         = 4.
      IF sy-subrc <> 0.
        "Ignore
      ENDIF.
    Please advise on how to
    -  avoid the content cropping
    -  enable duplex print
    when sending Adobe forms directly to the printer
    Thanks very much!
    Bernt Evensen

    Thanks for your answer, Ramachandra!
    However I need some more specific information to solve this.
    Which printer layout settings are relevant for the handling of margins and duplex printing for Adobe Forms?
    I have not set up the printer myself but when talking to the printer guy which settings should I recommend him to look at?
    I can see in transaction SPAD that there are settings specific to SmartForms but there is nothing said about Adobe Forms. Is there some way to make Adobe Forms related setting appear in SPAD for a device type?
    Maybe my problem is not related to the printer device settings but rather to the way the printer is being called. When printing duplex we will have to override the default settings of the printer anyway.
    Function module FP_JOB_OPEN has a parameter structure of the type SFPOUTPUTPARAMS. Which fields in this parameter structure are to be manipulated to get duplex print and output fitted to page size?

  • Idle printing message when printing wirelessly from a Mac - HP Officejet 6600

    I am having an issue with my HP Officejet 6600.  When I try to print from my Macbook Pro I keep getting an idle message on the print screen.  It is showing that it is connected, but will not print.  In addtion I have been able to wireless scan to my computer from the printer and test print from the utilities window on my Mac.  This problem is baffling because it was able to print last week and now can't.  Also the printer will print wirelessly from my PC, but not the Mac.  Please help.
    This question was solved.
    View Solution.

    Let's set a static IP address and external DNS for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS. This is Google DNS. You can choose another external DNS if you wish.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Error message when ejecting ipod from itunes

    WHen i press eject next to my ipod in my library, an error message pops up stating "the ipod cannot be ejected because it contains files that are in use by another application." What does that mean and how do i make it go away without messing up my ipod? ANyone have answers?

    Easy way. Reset the iPod, then disconnect when you see the Apple logo.
    Another way. Hold ctr-alt-del to bring up the Windows Task Manager. Go to the Processes tab and look for iTunesHelper.exe and iPodService.exe. Select them and hit the End Process button. Close the Windows Task Manager Window and try ejecting the iPod via the safely remove hardware method.
    If you are still having problems you can try one more thing. Right click on the My Computer icon and select Manage from the list of actions. Go to the Services and Applications item and from there the services item. Double click on the services item to bring up the list of services currently installed on your computer. Look for the iPod Service and double click on it. From the new window select Stop. Now try again to eject using the safely remove hardware option.
    Some anti-virus security software (particularly McAfee) can also cause a problem, and if you have this you might want to try turning it off and see if the iPod then ejects correctly.

Maybe you are looking for