Change or reset 0CALQUARTER to older version possible?

Dear experts,
we have a difference between 0CALQUARTER in DEV and PROD.
DEV is Business Content Release 3.0/02
PROD ist 2.0/02
The difference is rather small. It is only that Version 3.0 has an output length of 6 whereas version 2.0 has an output length of 5
For some inevitable reasons we have to keep version 2.0 in PROD.
My question is: How can I reset DEV to version 2.0 or at least how can I change output length to 5?
Gregor

Its not possible to get it from the technical contents now. The only way with which you can get the prod object is to get it transported from Prod to Dev. Post transport you will have to re-activate the impacted objects locally.

Similar Messages

Installing of older version possible?

Is it possible to install an older program version than the currently avaliable (e.g. Acrobat X instead of XI)?

On Windows computer can Either install Acrobat X or Acrobat XI and on MAC computer you can install both the version.
You can install multiple version of other software like photoshop, Illustrator, Dreamweaver on the Windows and MAC both if software version is compatiable with OS.

Event structures in older versions of labview?

Can anyone tell me how to create a workaround for a 'value change' event structure in an older version of labview? I have a student version of LabVIEW 6i and need to create a queued buffer from each value change. Thank you.

James.Morris wrote:
Ah, you're only one release away from the event structure. That's too bad.
You're going to have to implement a Polling loop that continuously checks the user inputs. Make sure you add a Wait function to the loop (~100ms) because that will act as your chance for the user to make changes. You can use shift register(s) to keep the previous loop's values and compare to get a bunch of Value Change booleans. If you want a specific case for the specific events, then you can group all of your Value Changes in to an array and act upon the ones that are True via a Case Structure.
The Event Structure only pulls a single event per loop and has a queue of events to handle for following loops. You might encounter multiple value changes in a single loop if the user clicks fast enough, or you trigger value changes. To avoid losing the trailing events, you should probably have a For loop within the Polling loop that handles all True values. Either that, or have a consumer loop that handles all of your events.
James, I swear I'm not picking on you today
You can set the maximum number of events alowed in the event queue per event in the edit event dialog box. Check box and int fields in the lower right side.
6.i didn't have a "Value (Signaling)" property- (a subject of some CLAD exam questions not that you suggested it)
Student editions could not use 6.i events. From 7.0 or 7.1 through 2011 Student Edition could use but not edit event structures. 2012 and on Event Structures are available in "All Versions" of LabVIEW- at the time. I haven't looked into the newer license options.
On to licensing options. (Not a lawyer! consult your Legal Dept!)
If you are not doing work towards earning a educational certificate you should not be using Student Edition. And, in some cases (Like working on a student project with commercial investment) not even then!
The Home Edition is also a new option. It is intended to enable fast "Proof of Concept" development or development for your sole non-comercial use.
LabVIEW Full and Professional are for comercial use and have a "Home Use License Agreement" clause attached. If your company owns a LabVIEW License you CAN install a copy on a "Home PC" for the limited use of aiding your employer (who paid for the license) such things would arguably enclude "Training"
NI is not totally opposed to negotiating "Exceptional" agreements for mutually beneficial reasons. Youl'd better bring a justification better than "I can't afford it" Go find some investors and buy a license in that case. And Yes, until the moderators take this down, I did at one time have a LabVIEW license for exclusively engaging the LabVIEW Community (Forums and NI Sponsored events use only- LAVA was not encluded) I'm not sure if such a deal could be negotiated in the future. In Fact, The Home Edition would have been less costly.

Downloading OLDER version of ipod software

Does anyone know how to safely change back to a previous version of IPOD software? I allowed my itunes version and ipod software to update a couple of weeks ago and have had trouble since. Someone told me to go back a version, but the problem is my ipod, not itunes. At least, I believe this b/c the files play fine in Itunes, but mess up on my Ipod. So, if anyone knows how to safely revert ipod software, please let me know. Thank you!
PS -- my IPOD is the 80 gig video, if that helps. Thanks.

The process for changing it back to an older version of software would be the Restore process. The only difference is that an older version of the iPod software would get installed after the iPod is erased. If you have not tried using Restore with the most current iTunes, you should definitely try that first.
If you read about people having problems after a Restore, it is likely because they are having hardware problems with their iPod. In those cases (hardware issue), doing a Restore is not going to resolve the problem. However, in most cases, it is a software issue and doing a Restore will resolve the problem. When it works, almost no one bothers to post in the forum that +they did a Restore and it worked+, so you don't read about the times when it worked, only about the times when it did not work. And when it does not work, it's probably due to a hardware problem.
The other problem reported often is with the 4th gen iPod (click wheel). That model needs to be plugged into the power adapter as the last step of the Restore process. Some second-hand owners don't have a power adapter (it comes with that iPod model), so the first time they need to do a Restore, they are stuck and their iPod is bricked.

I'd like to know if it's possible to access an older version of a web page in Firefox.

I'm wondering if it's possible to access an older version of a webpage I've since made changes to -- the site is through Livejournal.com -- in order to see the information that was on the older page. I'd like to keep it consistent with the new page, but am not sure how to do this. I very stupidly didn't save a copy of the old page!

If you know where the page is at, I myself don't see any reason why you can't access it.
The only thing I could think was if Livejournal.com had a lock on the page or if you had to sign-in and your u/n and p/w had expired.
I'd say go ahead and at least try.
davewdan

I have an older version of imovie. After I change the photos using the Ken Burns effect and save them, the next time I open the file and click 'show photo settings' to change the zoom, the picture appears black and I can't change the zoom?

I have a five year old version of imovie that generally works fine. However, when I add a photo using the 'Ken Burns' effect then save the movie, the next time I open the file and click 'show photo settings' the picture appears black and I cannot change the zoom. Any suggestions?

Have you rendered both iOS 7 and iOS 8 (both of which will work on your iPhone 5) out of the question entirely without trying every possible configuration? The animations can be disabled entirely, if that's the problem. And if the whiter-brighter user interface is the problem, there's reverse-contrast modes that darken everything. You can expose accessibility controls to gain immediate access to these functions to toggle them on and off. I guess my point is you may have decided against upgrading the OS based on an early experience with iOS 7 when Apple has since made changes in later revisions to address some of the usability complaints.
Now, Apple's instructions for downloading older versions of apps is to do so from the Purchased list, not from the app's product page.
See here:
Install the latest compatible version of an app on an earlier version of iOS or OS X - Apple Support
Let us know how that works for you.

Just updated to 8 & now I can't open any web pages & firefox is still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

Just updated to 8 & now I can not open any web pages as well as firefox will not close out, it still running in the background after browser was closed. I uninstalled and reinstalled as well as disabled add-ons and plugins nothing has changed, can I downgrade back to on older version?

See "Hang at exit":
*http://kb.mozillazine.org/Firefox_hangs
See "Firefox hangs when you quit it":
*https://support.mozilla.com/kb/Firefox+hangs
A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.com/kb/Server+not+found
*https://support.mozilla.com/kb/Firewalls

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plane two dimensional view, which is a little plain. Can I revert back to an older version via my time capsule save?

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

Please change the view in the top sites, the 6.1 upgrade has reverted back to a plain two-dimensional view, which is a little dated. Can I revert back to an older version via my time capsule save? C'mon Apple upgrades supposed to leap into the future not the past. :-(

How do I get firefox to work after installing an update (Can I go back to an older version if possible)?

I recently updated from Firefox 3.6.3 to 3.6.8. I skipped previous updates because of similar problem I'm experiencing now however now it is worse. Immediately after installation, messages windows pop up. The FIRST window says: “Firefox has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.”
The SECOND window (with a red circle surround a white ‘X’) says: “firefox.exe – Unable to Locate Component. This application has failed to start because xul.dll was not found. Re-installing the application may fix this problem.”
The THIRD window is called the “Mozilla Crash Reporter. We’re Sorry. Firefox has a problem and crashed…” where it gives me the option of submitting a report and restarting (which I have done).
The problem happened during previous attempted updates which is why I tend to avoid Firefox updates until today. However, in the past all I would do is manually power off the computer and restart the computer. Firefox never completed the installation so I was able to use the older version of Firefox.
Now I cannot do that because Firefox is updated to 3.6.8 which refuses to open. How can this problem get fixed? I am not “tech savvy” but loyal to Firefox (and for now I have no access to all my bookmarks).
Thank you.
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.125 Safari/533.4

Hello Michael.
Hopefully this support article is what you need:
https://support.mozilla.com/en-US/kb/Firefox+will+not+start
In any case, it's possible that you are having a problem with some Firefox add-on that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you should make sure it's not caused by one (or more than one) of your installed add-ons, be it an extension, a theme or a plugin. To do that easily and cleanly, run Firefox in [http://support.mozilla.com/en-US/kb/Safe+Mode safe mode] (don't forget to select ''Disable all add-ons'' when you start safe mode). If the problem disappears, you know it's from an add-on. Disable them all in normal mode, and enable them one at a time until you find the source of the problem. See [http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes this article] for information about troubleshooting extensions and themes and [https://support.mozilla.com/en-US/kb/Troubleshooting+plugins this one] for plugins.
If you need support for one of your add-ons, you'll have to contact its author.
If the problem is not disappears when all add-ons are disabled, please tell me, so we can work from there. Please have no fear of following my instructions to the line, as all can be easily undone.
Also, if you want to use an older version of Firefox, please use Firefox 3.5.11. Only versions 3.5.11 and 3.6.8 are supported, and both contain all the latest security fixes. Using any other version is unsafe and not recommended.

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box no go

My Safari will not allow me to open my Google calendar with Google Apps. I have to open my email with the older version of Google Apps. This happened after I installed 5.1.4. I tried to use the fix of changing to 64 bit by unchecking the 32 bit box but that didnt help.

I assume that there are legal restrictions on the way in which iTunes can get artwork automatically from any source apart from the iTunes Store (which is what the right-click > Get Album Artwork function uses). For example, even though the Gracenote service that iTunes uses to match CDs and retrieve metadata (artist, album, track titles, etc.) also has artwork functions, iTunes does not make use of these.
For manual addition of artwork, there are three cases where the image you select may not be correctly embedded in your media files:
your media are in a format that doesn't accommodate embedded artwork - typically WAV files. To embed artwork you'll need to convert to another format - Apple Lossless or AIFF if you want to preserve lossless quality, AAC or MP3 otherwise.
your media files are read only - to fix this, use Windows Explorer to find the folder that contains your files, right-click and select Properties. On the General tab there's a check box labeled "Read-only" - if this is checked, or is grey (sometimes blue), click the box so that the flag is unchecked and the box is white. Click OK, and then OK again when the "Apply changes to this folder, subfolders and files" option selected. Now try adding the artwork again.
Windows permissions issues are preventing iTunes from updating your media files (there's some anecdotal evidence of a change in this behavior in iTunes 12). See turingtest2's notes on Repair security permissions for iTunes for Windows for advice on fixing this, then try adding the artwork again.

I accidentally deleted Garageband on my MacBook Pro, version 10.6.8. The new version of Garageband is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD for my computer

I accidentally deleted GarageBand on my MacBook Pro, version 10.6.8. The new version of GarageBand is only compatible with 10.9 and above. Is it possible to still get the older version? OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?

The new version of GarageBand is only compatible with 10.9 and above.
If your Mac can run MacOS X 10.6.8, it probably can be upgraded to Yosemite, if you don't have to stick to Snowleopard for other reasons.
Is it possible to still get the older version?
Amazon or eBay are still selling iLife '11 installer disks, and you could reinstall GarageBand from these DVDs. But it will be expensive.
Have you checked your backups, if you can restore GarageBand from a backup?
OR, can I get another copy of the startup CD that came with my computer so that I can reinstall GarageBand?
Sometimes the AppleStore Support will replace missing installer CDs for a fee.

Is it possible to migrate the app from latest version to older version

Hi all,
I have a adf application in jdeveloper 11.1.1.4.0.Due to some issues i have to do it in jdeveloper 11g release 2 (11.1.1.2.0).Is it possible to migrate the application from latest version to older version of jdev.
Thanks.

It's not officially supported, but you can try a couple of things - first open the application in the old version and see if it works.
If it doesn't you can try creating a new application in the old version and then use the create project from existing source option to map to your existing code.
This all of course assumes that you didn't use features in the new version that are not available in the old version.

Now i got the answer that i phone cant be downgradable from 7 to 6.1.If it possible thats good.I expect newer version will be better,one fuction i liked in older version is contact picture size is full screen

now i got the answer that i phone cant be downgradable from 7 to 6.1.If it possible thats good.I expect newer version will be better,one fuction i liked in older version is contact picture size is full screen

tell apple: http://www.apple.com/feedback/

I receive a message that my compatibity mode is set for an older version of windows how do I reset ?

I am receiving a message that I tunes is set to run in an older version of windows, how do I reset ?

Hey bayside property,
Welcome to the Apple Support Communities. If you are having a pop up that is telling you about compatibility mode, the following article will assist with removing that.
iTunes for Windows: How to turn off Compatibility Mode
http://support.apple.com/kb/TS1489
Regards,
-Norm G.

Trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), nad do I want to relace with older version. I do this and then it says change can't be done because Firefox is in use. ??

trying to update to 4.0 on my Mac. When trying to drag new icon to applications folder, it says 4.o already in place (it isn't), and do I want to replace with older version. I do this and then it says change can't be done because Firefox is in use. ??

That version cannot be upgraded further if it's a 2G model. The 3G model can be upgraded to iOS 5.x.x. You can't have a 2G model because the maximum iOS version is 4.2.1.
Upgrading iOS
   1. How to update your iPhone, iPad, or iPod Touch
   2. iPhone Support
   3. iPod Touch Support
   4. iPad Support
     a. Updating Your iOS to Version 6.0.x from iOS 5
          Tap Settings > General > Software Update
     If an update is available there will be an active Update button. If you are current,
     then you will see a gray screen with a message saying your are up to date.
     b. If you are still using iOS 4 — Updating your device to iOS 5 or later.
     c. Resolving update problems
        1. iOS - Unable to update or restore
        2. iOS- Resolving update and restore alert messages

Change or reset 0CALQUARTER to older version possible?

Similar Messages

Maybe you are looking for