Change or Update product id

Hi All,
There is a requirement where in, i need to change or update the product id . Is there any function module which can be used to do that? Pls its very urgent.
Thanks & Regards,
Sundar

Hi Srikanth,
Thx for the reply. My requirement is that there were spelling mistakes for few products when it got uploaded . I dont want to change anything else in the product. Just i got to recorrect the spelling. Will the function module which u have sent will really help?
Regards,
Sundar

Similar Messages

Any problem in changing the update mode.

Hi Gurur's,
                We have set Unserialized V3 update mode in R/3 production for 2lis_03_bf.
                We are getting '0' records while running delta.
                Now can we change the update mode to queued delta and run and for that what are the precautionary steps to be done.And will be the effect if we done like that happen.
Cheers,
Satish.M.R.

Hi Satish
The diffrence between these 2 update modes are
Queued Delta:With this update mode, the extraction data is collected for the affected application instead of being collected in an extraction queue, and can be transferred as usual with the V3 update by means of an updating collective run into the BW delta queue. In doing so, up to 10000 delta extractions of documents for an LUW are compressed for each DataSource into the BW delta queue, depending on the application.
unserialized V3:With this update mode, the extraction data for the application considered is written as before into the update tables with the help of a V3 update module. They are kept there as long as the data is selected through an updating collective run and are processed. However, in contrast to the current default settings (serialized V3 update), the data in the updating collective run are thereby read without regard to sequence from the update tables and are transferred to the BW delta queue.
Please go through the below article
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5039632a-c398-2d10-0aaf-97167a3de753?QuickLink=index&overridelayout=true
You will get clear idea about how the data flow differs in this 2 update modes
Hope this helps
Regards,
Venkatesh

Updating product price lists

I'm trying to develop a numbers document that will allow me to update products in our local system when the manufacturer sends out their new pricelists.
Specifically I need a way to:
1. identify and isolate newly added products
2. identify and isolate products that have been removed
3. identify any products that have updated descriptions and or prices
Currently I can manage to do these things, but I feel like I'm going about it in a very roundabout way. Since I assume this is something that many people need to do I figured I'd ask how others are doing this. Maybe there is a tutorial for this type of spreadsheet that you can point me to.
Thank you

The manufacturer gives us the spreadsheet as an excel document, here's an excerpt:
And this is what I've gotten so far in my attempt to make a streamlined update process.
As you can see in addition to adding and removing new and obsolete entries I'm adding chinese translations. That is why I also need to figure out if any of the descriptions change as when they do I need to update the translation as well.
So far I've been creating a sheet and using VLOOKUP on the ItemID column for matching up the new list to the old list to see which items no longer exist; another sheet matching the old list to the new one to see which items did not exist before an another sheet to add the translations. And then I have yet another sheet that has the formatting I need when exporting a .csv document for our POS system.
I have a feeling that there is probably a more straightforward approach to accomplishing this task, that only my inexperiance with spreadsheet software is preventing me from finding.
Then there is the matter of finding changes in the descriptions and prices so I can hightlight them for the sales staff and update the translation.

Can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable

can someone plz confirm me that how i can change or update the security questions related to my apple id? as i have been never put them since i create my apple id but now due to some security reasons its asking me again and again the answers. i am unable to go through the process. thanks.

Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities

Updating product revenue close date based off opportunity close date

We do not use the product revenue close date, only the opportunity close date. We need to get the fiscal month of the opportunity close date but we have several reports the need to use the opportunity product history area and that does not contain the fiscal month for the opportunity. If we did a combined report, we cannot offer the user any prompts.
Does anyone know how to get the opportunity close date fiscal month from the opportunity products area? Is there a way to update the product revenue close date when the opportunity close date it updated?
Thanks

Hi David,
In the universe you describe you have the opportunity 'Close Date'. Use a 'case-when' expression to create the 'Fiscal Month' you need.
Other than that you can use the JoinFieldValue function in the application to retrieve the opty close date, but that will require you to update product revenue for it to trigger which probably won't work for you.
Good luck.

Error - Update Product Data in Solution Manager

Hello,
We are currently downloading the Enhancement Package 4 in SOLMAN via Maintenance Optimizer, however, after choosing the Technical Usages in step 2.1, it shows an error in step 2.2 (Select OS/DB Dependent Files):
Error : Update Product Data in Solution Manager
Has anyone encountered the same problem? Would it be fine to continue on the next step after selecting the files which you need for your operating system-database combination.
Any information is highly appreciated. Thank you.

Hi Jaypee,
Check guide How-To Install EHP4- A practical guide. Solution of this problem is documented there. you can download it from http://service.sap.com/erp-ehp
Extract from this guide for this problem:
Make sure that you update the product data in SAP Solution Manager. This is described in SAP Note 1277035 which is referenced from the collective SAP Note 1122966. If you do not update the product data, you might get an error message after the stack calculation. The message text explains the problem in more detail.
Thanks
Sunny

How to get the Change node in Production Server!!!!!

Hi Guys,
Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
Regards
Ansuman Mohanty.

Hi Mr!
If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
All the best:-)
Kind Regards,
Saisree.S

How to get change date in Production Order ?

Dear Friends,
I want to know it, how to get change date in Production Order "Administration-TAB".
F1-Help, It is displayed with "Change date for Order Master". and Structure table "CAUFVD".
But, CAUFVD is not Transp. Table.
Which table should I read ?
Thanks in advance
Yamazaki-H

Dear Friend
Thank you for an answer.
It was settled.
Best regards.

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

How do you change the Print Products Store from USA to UK like you can do in IPhoto?

Please keep in mind that Aperture is not an enhanced iPhoto, it is a different application with a different philosophy and a different intended audience. If you approach it with that in mind you will have a lot less frustration as you learn Aperture.
Aperture adds a layer of complexity that is not needed by many. iPhoto is a very powerful application and fits the needs of many amateur photographers.
As for your original issue, as I said I am surprised that iPhoto allows you do switch countries like that and am not surprised that Aperture doesn't. If this is something you really need to do working in Aperture but using iPhoto to order the prints is a good work around and will not be all that difficult to do once you get the hang of it.
As for your new question, the books in iPhoto and Aperture are different enough that the code that created the book in iPhoto wouldn't work in Aperture. What happens when you import an iPhoto library into Aperture is that the images in the book are combined into an album in Aperture with the same name as the iPhoto book. You will need to re-create the book in Aperture uaing the images in this album.
Hope this helps, post back if you have anymore questions.
regards

3056a will not update. Product update turned on. Click on eprint, it tells you to update product.

When I click on the eprint button, it asks me if I want to turn eprint on, I say yes. It tells me to turn on auto update I say yes. It then tells me to update product. I click yes, and nothing happens. It still sys Update product. I looked in the help pages, and it says to click on the eprint button, and scroll down to update, but my printer does not have this option in it's menu. Like I said, when I click on the eprint button it only tells me to update, it doesn't actually do it, or give me a manual update option. Please help me to update this thing so I can start eprinting! Oh, and it is connected to my network with internet, and all of my computers can print to it.
This question was solved.
View Solution.

Please refer to the below thread regarding this issue:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Deskjet-3050A-3056A-quot-Please-Upgrade-Produc...
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Why import of change request in production takes more time than quality?

Hello All,
why import of change request in production takes more time than import into quality?

Hi jahangeer,
I believe it takes same time to import a request in both quality and production as they will be in sync.
Even then if it takes more time in production that may depend on the change request.
Thanks
Pavan

FM/BAPI to update Production Order at Operation Level

Hi Friends,
Can any one help me in this issue.
My rek is, needs to update Production Order Sequence Number(AFVC-CY_SEQNRV) at operation level.
There are some Production Orders under one Project.User is updating theSequence Numberfor the first order in that group (TCode CO02),at the time of save remaining Orders in that group needs to be updated with the same Sequence Number.
Please provide me with FM/BAPI(operation level not at header level)
Points Rewarded,
Thanks in advance,
PRBode.

Prathap,
Have you tried using the Bapi : BAPI_PP_TIMETICKET
This would confirm at operation level..
Hope it is useful.
Regards
Ram

How to Update Product category in bidder data of business Partner

Hi Experts,
I am new at SRM,
While Doing Supplier Registration i am creating Bidder and Business Partner Using these two bapi
'BBP_CREATE_ORGANIZATION
BBP_CREATE_CONTACT_PERSON
Now i also want to update Product Category , that should be display on
Procurement -> Business partner -> Bidder -> select bidder - > Bidder data
Please tel me any fuction module can be used
Thanks & Regards
Prashant Gupta

Hi Prashant,
Please share the solution.
I am having the same problem.
thank you
Tumelo

How to automatically update products and product categories?

Hi friends
How to automatically update products and product categories.Is it possible?
regards
venkat

Hi,
The delta load does not work for product categories but only products.So to bring in the new product categories into SRM you will need to start the load of the object DNL_CUST_PROD1 again.
The CRM middleware allows the following two methods for replication.
-Initial loads:
Launched manually (R3AS), the objects (customizing or business) are replicated between SRM and R/3, according to the filters you've put on the object (R3AC1 for Business objects like MATERIAL, R3AC3 for customizing objects like DNL_CUST_PROD0 and 1).
-Delta loads:
This option is only possible for Business objects, which is the case of MATERIAL.
With this option a daemon is launched between the 2 servers. Every modification made on an object on SRM or R/3 is transfered as soon as this object is contained in the filter retrictions (creation and/or modification). this is done through transaction R3AC4.
Also refer the foll thread:
Material group from R/3 to COMM_CATEGORY (SRM)
Related notes : OSS notes 872819 and 720819.
BR,
Disha.
DO reward points for helpful answers.

Stardard Text (changes ) move to production server

Hai all
<b>i have one situation to change the content text in the standard text in so10 transaction
i have done the changes while saving it wont ask for any request
i need the same changes in the production server .
how can i transport this standard text ?
is there any way to transport or send it to the production server?
if any have any knowledge please share with me my id is [email protected] ?</b>
thanks and Regards
Vinay Kumar.
email id :[email protected]

Hi,
USe the program RSTXTRAN to attach a standard text to the tr. request. You will have to create to create a request and then execute this transaction with the necessary inputs.
regards,
Ravi
Note : Please close the thread if the issue is resolved

Change or Update product id

Similar Messages

Maybe you are looking for