Change other Infotype thru PA30

hi all,
i have user requirement like this...
when user change IT0021, child to deceased child then it will automatically change IT0002 - number of child (anzkd). eg. from anzkd = 3 to anzkd = 2, i have tried user exit on save by using BAPI_PERSDATA_CHANGE, but it didn't save entry on IT0002 but it will show screen 'Change IT0002' . i also try to use dynamic action, but doesn't work either.
Any idea?

Hi Fandi Kusmawardi,
                   The time constraint for IT0002 is 1. So this couldn't have overlappings and gaps. So u have to create a record with the new date. Have U tried providing (delimiting) the begin date for the BAPI. Please check this if U haven't yet tried this.

Similar Messages

  • Updating a vendor table when address changes in infotype 6

    hello all,
    when an employee changes his personal information in the PZ02 service, it updates the infotype 6, as soon as the update is done it has to update the LFA1 or LFB! vendor table.
    is there a workaround for this
    BR
    venu

    thanks for the reply.
    whenever there is an address change in IT6 it should update the vendor table(for eg: if changes are done in PA30 and not from ess, so its kind of generic version that i have to create to update the vendor table either from ess or PA30).
    i am already using the HR_ESS_ADDRESSDETAIL and HR_ESS_ADDRESSLIST for changing the fields on the iview.
    (t77www_sc)and linking it to pz02.so what u mean is i can go ahead and write the code in the same module for updates.
    is this is the only way to do it, or we can do it by BAPI_address_change.
    I am trying to know all the different ways it can be done.
    a)can i use a BAPI if so which one?
    b) can i do it thru workflow.
    c)or user exit.
    Please help me out with details
    thanks
    venu

  • Change of infotype 0007 is  causing the   infype 0488 to be change

    hi,
    Its regarding HR Singapore Public Leave Scheme , infortype 0488.
    There are 2 leave schemes :
    1. 1979 leave scheme (28 days)
    2. 2004 leave scheme (21 days)
    When CHANGE the Planned working time (infotype 007) (thru Pa30 ) from 100 percent to 50 percent and the daily working hrs from 8 hrs to 4 hrs .
    the leave scheme automatically changes from 1979 leave scheme to 2004 leave scheme( it0488).
    By right the infotype 0488 should be the same.
    Did anyone came across this problem.
    Can anyone advice me regarding this issue.
    regards,
    Sangita.

    Hi Sangita,
    Although I dont have personal experence on this issue, however this typically points towards a dynamic action.
    Please check from T588Z view whether there is any dynamic action configured on change of infotype 0007 - which triggers change on the other infotype.
    Cheers,
    Aditya

  • Data needs to be seen thru pa30 transaction as well.

    Hi All,
    I have enhanced infotype 0023 ( Previoues emploment). As a enhancement I have added three fields in PA0023.
    The three fields stores position and the experience in years and months of an employee in previous organization.
    In pa30 screen as soon as user gives the start data and end date in IT0023 of begda and endda and presses enter , the difference of start dt and end dt is calulated and shown in
    in customized field, also this gets stored in PA0023 table.
    But the problem is while seeing the allready created records in pa0023 thru PA30 transaction, the value of  year and month is shown as 0. Thru se11/se16, I can see the actual values but thru pa30 not able to see the actual value.
    As per the requirement the actual value of years and months should be displayed thru pa30 .
    Please suggest.
    Warm Regard,

    HI,
    Have you enhanced the infotype from PM01 ???
    Are you check the data from same period for the employee. There might be multiple  number of records for that employee.
    Also check in PA20.
    Award if useful

  • Changes in Infotype 0001

    Hi,
    Is it recommended to make all changes in Infotype 0001 like PSA, Administrators through action like "Organization Reassignment" or should be changed through PA30.
    What is a recommended practice especially when there is a need to change the admin?
    Regards
    Yashika

    Hi Yashika,
    When you open IT 01 in PA30 in change mode, some fields will be grayed out, these fields can not be changed without any personal actions.
    But the fields which are open for change, there we need to decide whether the employee was any time in that PSA or Administrator job.
    If he was there for some period of time then we need to create a new record in IT 01 by copying the old record and changing the specific field. If the data was maintained wrongly then we can simple change the existsing record.
    Br/Manas

  • Reason for change of Infotype Based on Company Code

    Hi Experts,
    I have a requirement where I need to restrict the F4 HELP in
    PA30 Transaction for the infotype 15  based on company code for the field reason for chagne.
    I know that reason for change of infotype are maintained in the table T530E.
    But can this be restricited through SPRO configuration.
    Thanks in Advance.
    Regards,
    IFF

    Hi.
    It's possible to change the search helps with a search help exit.
    Take a look in SE11 for search help H_T530E.
    Search help exit
    A search help exit is a function module for making the input help process described by the search help more flexible than possible with the standard version.
    This function module must have the same interface as function module F4IF_SHLP_EXIT_EXAMPLE. The search help exit may also have further optional parameters (in particular any EXPORTING parameters).
    A search help exit is called at certain timepoints in the input help process.
    Note: The source text and long documentation of the above-specified function module (including the long documentation about the parameters) contain information about using search help exits.
    Function modules are provided in the function library for operations that are frequently executed in search help exits. The names of these function modules begin with the prefix F4UT_. These function modules can either be used directly as search help exits or used within other search help exits. You can find precise instructions for use in the long documentation for the corresponding function module.
    Regards.

  • Report to track changes to infotypes prior to running the  payroll interfac

    wants a report to track changes to infotypes prior to running the  payroll interface.  The attached report looks like it should work but it returns nothing.  Is there config that turns on "Track Changes": for select infotypes?  If so, can they be activated for key infotypes so this report will run?
    Name, Address, position, etc.
    Not attendance and absence ITs.

    Hi,
    IMG – Personnel Management – Personnel Admin – Tools – Revision – Set up change document:
    This node has three items:
    Infotypes to be logged
    Field Group Definitions
    Field Group Characteristics
    Using these three options you define which infotypes you wish to log, then which fields, then you define which groups of fields are to be saved. Click each link, or see the sections below:
    Infotypes to be logged
    Here you define which PA infotype numbers you require logging. Select New Entries and enter a transaction class (A for Pers Admin, B for recruitment), then enter the infotype number and save.
    Field Group Definition
    When changes are made to a logged infotype, the field contents before and after are recorded. This is the very reason for logging the infotype, but there is an overhead in performance and disk space used so it needs to be given consideration. Typically you will want to record fields that are pay relevant.
    Using the field group definition, you specify which fields you wish to record changes in. When any of the fields in the group are changed, all the fields in the group are saved. You can use an asterisk to log all the fields of the infotype but this is not recommended for space and performance, also there are many fields on an infotype that you will not be using, that will be saved also. Ideally you will pick individual fields of the infotype and enter them like so:
    The field group number is a freely defined number you allocate to the group, it will be used in the next step. For normal use, simply pick any number not already used in that infotype. All fields with the same field group number are recorded in the log, even if they have not changed.
    Click New Entries and enter the infotype number, field group number and field names that you wish to record.
    Field Group Characteristics
    When you have set up the field group numbers, use the field group characteristics to activate the logging of those fields. You can also specify a supplementary field group; this means that the contents of another field group can also be saved at the same time, even though the contents have not changed. In practise it is not used much. Simply select new entries, enter the transaction class, infotype, and in the DocFieldGr enter the number you assigned to the field names that you want to store, then enter L for Long Term Documents (short are not supported)
    The Audit Report
    To access the report showing the logged infotype changes, use the HR report tree available from various menu paths, including:
    Main Menu – Human Resources – Pers Management – Administration – Info System – Reports - Documents – Infotype change – logged changes in infotype data. (RPUAUD00).
    When you run the report, select the infotypes you require, and select and execute.
    Cheers
    Prasanth

  • Error: while configuring logs for changes in infotype data

    Hi All,
    I am configuring the following Tables for maintain logs for changes in infotype data.
    V_T585A, V_T585B and V_T585C
    While configuring V_T585B, when i input * in 'field name' column it gives me an warning message " All data fields in **** infotype 31 will be deleted.
    Please let me know, what does this warning message means?
    Also, How is the report RPUAUD00 read?
    Regards
    Simran

    Hi Simran,
    you are not suppose to give the IT 0031-Reference Personnel Numbers in these tables. why because this will done at the time of Employee hiring only and we don't change this. if you change you will lost the old data in the IT.
    Normally we assign only the IT which we change frequently for the master data. example like 0 1 2 7 8 9 27 582 - 589 2001 2006.
    if you are configuring today means from today on-wards any changes had made to these IT's you can see in the report. before changes will not be seen. in the report you have to choose either long-term document / short-term document and remaining fields as per the requirement.
    Regards,
    Praneeth kumar

  • Table for the report RPUAUD00  Logged Changes in Infotype data

    Hi
    I have a query with the program RPUAUD00 Logged changes in Infotype Data.  In which table stores the details of the program RPUAUD00.  for example in the 1st period there is a LWP record for the employee.  If in the 2nd period the LWP entered in 1st period has deleted, in the log the LWP displays for 1st period  new field contents, Action Indicator I.  The deleted information displayes in Old field contents with the Action Indicator D. We want to know in which table the LWP insert and LWP delete (d) details are stored.
    This information required to create a report for ESI.  In the report No of days (payroll processed for) has to mention.  To know the no of days need to access the report RPUAUD00.  From the RPUAUD00 the details of LWP insert and delete can be known.
    Request to help in solving the issue
    Thanks & Regards
    EKP Yadav

    Hello:
    Logged changes in Infotype Data are stored in cluster table PCL4 ID  LA and SA for employee and LB and SB for applicant. Maybe L is for longterm and S for shorterm
    Cheers.
    Antoine

  • BUS1065 - SAP HCM - Employee changes in infotype 0000 + infotype 0001

    Dear all,
    I have a problem with the customizing in order to recognize the changes in infotype 0000 + infotype 0001 for employees.
    What do I want?
    If there is a new hire, a rehire, a retire or a company-left action, I want to start ONE workflow in order to dispatch the employee data to several satellite systems considering the new validity dates.
    What happens currently?
    I maintain a rehire action through transaction PA40 and the system raises several events so that the workflow start multiply, meaning raises event hired, rehired, companyleft, ...
    My customizing:
    TCode: SWETYPV
    BO BOR-Objekttyp     BUS1065     COMPANYLEFT     WS91000007     0
    BO BOR-Objekttyp     BUS1065     HIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     POSITIONCHANGED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     REHIRED     WS91000007     0
    BO BOR-Objekttyp     BUS1065     RETIRED     WS91000007     0
    TCode: SWEHR1
    P     Person     0000                                                                      BUS1065
    P     Person     0001                                                                      BUS1065
    TCode: SWEHR2
    P     Person     0000     Maßnahmen                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0000     Maßnahmen                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0000
    P     Person     0000     Maßnahmen                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        APP          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        DEL          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        INS          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        INS          100     BUS1065                                          CACS_LOG_HRINFTY
    P     Person     0001     Organisatorische Zuordnun                                        UPD          0     BUS1065                                          HR_EVENT_RULES_PA0001
    P     Person     0001     Organisatorische Zuordnun                                        UPD          100     BUS1065                                          CACS_LOG_HRINFTY
    TCode: SWEHR3 (For testing purpose only one entry)
    P     Person     0000                                                                      INS          1     BUS1065     HIRED
    Can anybody tell me how I can customize our system so that the system raises only event hired for a new employee hire and e.g. companyleft event for a termination action?
    Thx you all in advance for your support!!!
    In case you need more information, don't hesitate to contact me!
    Kind regards,
    André

    Hi
    TCode: SWETYPV
    BO BOR-Objekttyp BUS1065 COMPANYLEFT WS91000007 0
    BO BOR-Objekttyp BUS1065 HIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 POSITIONCHANGED WS91000007 0
    BO BOR-Objekttyp BUS1065 REHIRED WS91000007 0
    BO BOR-Objekttyp BUS1065 RETIRED WS91000007 0
    Iam not sure about what you have done in the customizing but, the above settings represents that the same workflow is set as receiver for different events.
    Now As per my understanding what ever you have posted, I feel like you want to restrict the workflow intiiation only for some of the events. and for the remaining events you do not want to start the workflow.
       If this is the case then I would suggest that to over come any kind of issues, I suggest you take a copy of the workflow WS9100000070 and assign the new workflow template to each different event, in this way you can differentiate which workflow is acting as a receiver for the event.
    and accordingly you activate the Event Linkages in SWE2 txn too.
    Regards
    Pavan

  • Add additional selection fields to RPUAUD00- Logged changes in infotype rpt

    Hi,
    I'am trying to add additional selection fields to Logged changes in infotype  report and was wondering if this can be done through customization instead of creating a copy of the std report to add the additional fields?
    Thanks

    Hi Ajay, The requirement is to add fields like personnel subarea, op code for reporting purposes.
    Thanks

  • Reporting changes to Infotype 2001 data

    Can anyone advise me how write a program to report Additions, Amendments and Deletions of Infotype 2001?  I know this must be held somewhere because the report Logged Changes in Infotype Data (S_AHR_61016380) shows this but I can't see where this data is held or how to report it. 
    I'm fairly new to ABAP so the more help (& code?) you can give me the better.
    Thanks in advance, Gill

    Thanks for the replies.
    Rich - When we delete a record in 2001 the corresponding record in PA2001 is also deleted. 
    We need to be able to see any deletions (& amendments & additions).  Is there a way to see this
    in PA2001 - perhaps there's some config we need to do? 
    Suresh - I hadn't thought of using the output of the RPUAUD00 report but you're right - we could
    use this - I just hoped we could get the data in a more easily useable format.  e.g. if we could
    get it directly from a table as Rich suggests that would be easier than reformatting the output of
    RPUAUD00.  Do you know how we could access the tables behind RPUAUD00 directly?
    All the best, Gill

  • Logged Changes in Infotype

    Dear Team:
    The transaction (S_AHR_61016380)Logged Changes in Infotype Data doesnu2019t  pick up any changes in info type ( 0021). Please advise me why the report is not retrieving any information on the same.
    Regards
    Team Member.

    Hi Patlolla,
    Goto SPRO : Personnel Administration -> Tools -> Revision -> Set up change document.
    There, add IT 0021 as an infotype to be logged.
    Best Regards,
    Dilek

  • S_AHR_61016380 - Logged Changes in Infotype Data-Restrict Authorization

    Dear friends
    I am facing a problem in S_AHR_61016380 - Logged Changes in Infotype Data.
    I am working on two company codes, Company A and B.  The number range for Company A starts from 1 to 10,000 and number range for company B from 10,001 to 20,000.  When HR Administrator of Company A runs this report, he is able to see the changes made for Company B too.  How can I restrict this in authorization.
    Please help
    Regards
    Santhosh.S

    Dear Andy
    Thank you for the reply, its working fine now, but I am able to track the changes from now onwards only, I mean to say I performed the configurations just 2/3 days back , while executing the report, its showing the only those infotypes which are changed from last 2/3 days only.
    But I want to track all the changes since beginning of the infotype creation. Any way to track the entire history of the infotypes
    Regards
    Kiran

  • How to Custom Infotype in PA30 ( in Employee Information tab)

    Can any one  tell me ..
    how to add my custom infotype in PA30 (Employee Information tab)
    I don't how to add....
    Tell me the procedure (Steps) to add in V_T588B.
    Regards
    Surendar T

    Hi Surendar,
    Go to SPRO : Personnel Management - Customizing Procedures - Infotype Menus - Infotype Menu - Double click INFOTYPE Menu.
    There from the Menu F4 help select "Employee Info" and click Continue.
    First note the last number for your user group.
    Click "New entries".
    Write user group - last number+1, infotype number (9XXX) and save.
    Good luck,
    Dilek

Maybe you are looking for