Change output printer when printing a production order
I can see that there is a specific printer associated with the output of a production order. Is there a way to change the destination (a different printer) when printing a single production order?
Right now I can see where the printer destination is shown in CO02, but I do not know how to change it. The screen is display only. The menu path is Order->Settings->Print info.
Any help would be appreciated.
Hi Janet,
Try this.
Path: CO02 -> Enter PO-> Settings -> List Control -> Here you can change the printer -> Click on continue button.
Regards,
Ferry Lianto
Similar Messages
-
Print veiw of the production order
HI PP GURUS
1.I know the pront option from co02 , go to functions- print ( I want to see print veiw before it gets printed), as there are changes to be made in the print out of the production order, after every change, papers is getting printed
please let me know how i will stop this and i can see the print veiw for my changes done, so that i can print after every thing is made ok
please give mw the steps
Himakarcheck this method,
1. go to the defaults inthe maintain user profile( su01)
2. check if the print immediately is checked if so then uncheck and try it.
reg
dsk -
Change paper size when printing
How to change paper size when printing pdf? No option for paper size appear.
That is a feature of AirPrint. If you do a Google search on "AirPrint paper size" you'll find documentation from major printer manufacturers. For example, this is copied from some HP documentation:
What paper and media sizes are supported?
With AirPrint, paper and photo media sizes are automatically selected depending on the application you are using on your Apple device, your HP ePrint printer, and the region in which you are using AirPrint. You do not have the option to select different paper sizes.
For example, from Apple’s Photo application, if the HP ePrint printer has a separate photo paper tray, AirPrint uses 4 x 6 inch photo media as the default paper size. If the printer does not have a separate photo paper tray, AirPrint uses letter-size paper. If you are printing from Apple’s Safaribrowser, letter-size paper is the default paper size in the US region, and A4 is the default paper size in Europe.
AirPrint supports the following paper and media sizes:
Letter
Legal
A4
4 x 6 in photo paper
A6 photo paper -
Might be a stupid question but if i send email to print when printer is off does it print when printer is switched back on, or does it have to be on to work which kinda defeats the point of calling it remote printing
This question was solved.
View Solution.Hi,
Print jobs sent to the printer once it turned off will not be printed of course, however the print job will remain on the server up to 24 hours. the job will be printed one the printer turned on and connected to the network during that timeframe:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02908385&cc=us&dlc=en&lc=en&product=5058338&tmp...
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?
Sorry to have repeated this question as if I were answering it. Just a mistake. I'm just now learning how to use this site.
-
Change of planning plant in the production Order
Dear Sapians
Please suggest me how we can change the planning plant in the production order once it is saved and confirmed before taking goods receipt.
Thanks
GVRRHi Prasanna,
1. Order is with material
2. This order is created independently
3. yes there are dependent requirements
Scenario is we have created Production orders with X plant. Later after confirmation and before GRN planning plant is changed as per the business decission. Now client wants to receive the goods in new planning plant.
I want to know, How can business area and functional area help us to receive the goods in changed planning plant scenario. can we maintain the plant values in this fields.
Regards
GVRR -
Allocation error when I create production order
Hi guys:
I met allocation error when I created production order with CO01.could you help me out?urgent!hi
What is the excatly the error so that we can tell u the reason
regards
ramakant -
Add/change multiple operations on a released Production Order
How can I add/change multiple operations on a released Production Order...I know how to add them manually one by one but is there a better way to add...like copy/paste since i am adding operations from an alternate route? Please advise?
Hy Aziz,
In process order go to operation screen go to Operation - Include Master recipe, then one pop up comes select required Master recipe and add operations of your interest.
But there are some restriction which doesn/t allow it if Inspection Lot, Control Recipe are created..
Regards,
Dhaval -
My printer double prints when printing
My printer (Hp Officejet 5610 All -in-One) double prints when printing. What should I do?
Hi,
Disconnect the USB cable and follow the below steps to restart the spooler service.
Click Start (Windows logo) >> All Programs >> Accessories >>
Right click on Command Prompt and open it as Administrator ( choose run as administrator)
Enter the below command in black window and hit enter key..
net stop spooler
That will stop the spooler service.
Then enter the below command and hit enter key to start the spooler service
net start spooler
That will delete the current print comment and the things in print queue.
Press the widnows key and R key on the key board to open run window ( Click on Start >> Run).
In run window enter services.msc and click Ok.
That will open services window.
From there double click on the print spooler service.That will open a new window.
Click on Stop button to stop and then click on start button to restart the spooler service.
Make sure that startup type is : Automatic and Service status is : Started
Click on Apply and Ok to close the services window.
If the issue resolved,
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Saul
Tech Support Eng.
HP -
CM25 : adjust setup time automatically when i dispatch production orders
Dear guru ,
I dispatch the production orders according to a specific sequence.
After the dispatching I can adjust setup time automatically using setup matrix.
Does exist a chance to adjust setup time automatically when i dispatch production orders ?
Thanks.no replies
-
No automatic prints for GR for production order
Hi All,
We have created a new Z output type by copying output type WF01 for our project. I have maintained this outpit type in the schema and mainatined a condition record for this output as well in MN21.
But when we do the podcution order confirmation (which triggers the GR against the production order in the background) we are not getting any GR document prints automatically.
What could be the reason for this? Am I missing something?
Regards,
V SHi V S,
To Enable print for GR you need to follow the below steps:
1) maintain the printer in the SAP system.
2) Assign the printer to WE01 output type in OMJ3 Tcode with combination of Plant + Storage location
3) Maintain the condition record in MN21 or NACE for individual slips or collective slips.
After doing the above steps you need to select the print button when you are doing MIGO_GR and select the slip types like individual or collective.
If you maintain the condition record as print immediatley you will get the print out immedialtley when save the document otherwise run T.code MB90.
Hope it helps.
Rahul. -
Preview and print a printout in production order release
Iu2019m using CO02 to release and save the production order. Currently u201Cbatch cardu201D printout is automatically printed in production order release. I want to change this to preview the printout before printout is send to the printer. Can someone tell me the configuration for this.
Hi
Pls refer this link
layout adjustement in production order- suitable to printout sheet
Print Preview of Production Order
layout adjustement in production order- suitable to printout sheet
Thanks
S.Murali -
WRITE_FORM_LINES. Need to change the style when printing in the SAP Script
Hi Experts,
I am using the WRITE_FORM_LINES function module to write a list of numbers.
But I need to change the font of the numbers when printing it.
I have changed it_header-tdstyle = 'S_DOCUS1'...SAP standard one but I need to create my own style.
I have created using SE72 and has given my own defined Character and Paragraph formats.
when I pass through the function module there is no change in it.
I think I need to create a text object is .. Can any one explain me hw to create a text object
http://help.sap.com/saphelp_nw04/helpdata/en/d6/0db827494511d182b70000e829fbfe/frameset.htm
CALL FUNCTION 'WRITE_FORM_LINES'
EXPORTING
function = 'APPEND'
header = it_header
window = 'MAIN'
TABLES
lines = it_serial
EXCEPTIONS
function = 1
type = 2
unopened = 3
unstarted = 4
window = 5
bad_pageformat_for_print = 6
spool_error = 7
codepage = 8
OTHERS = 9.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Waiting for u r replies...
Thanks,
Chaithanya KIn se75. go in change mode and click create button in application tool bar.
Now text object is something to which a text is attached, like, a material or a Purchase order etc.
Text format is like rich text format or plain text depending upon which an editor is invoked
Specify Editor application. SAP provides standard Editor application choose from one of them(TA or TN)
Line width
This attribute determines the line width to be used for this text in the text editor. A SAPscript text line may consist of up to 132 characters.
Save mode specifies how a text is saved in
dialogue task
When calling the corresponding save function, the system immediately writes the text module to the text database.
in update task
All changes to the text modules of a transaction are stored intermediately in a buffer. Only when the application object is updated does the system write the texts to the log file and, in the update task, stores them in the text file.
For not in text file
You can use SAPscript to edit texts that are not stored in the text database. In this case, SAPscript only returns the changed text table to the application program, which is itself responsible for storing the text -
HP Officejet 8500A Pro Plus changes internet layout when printing
My new 8500A Pro Plus changes the layout when I print from the internet. My option is set to "preserve the layout". For example, when there are three items in a row, it will print two on one row and push the third to another row by itself, even when there should be plenty of room for it to print as laid out, and even if I set the print to landscape. This shows in the print preview, and happens when I print from another computer. How can I get this to print properly?
From the front of the printer: Setup > Network > Restore Network Defualts.
Now, from the same Network menu, run the Wireless Setup Wizard.
If that does not work, tell me about your new router. What brand & model? What kind of encryption (WEP, WPA, etc)?
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
Printing Long Text of Production Order
Dear all,
Can we print the long text of Production Order using Co04N transaction? Please suggest.
regards,
KumarHi,
Thanks for suggestion,,, awarded points.
Thread closed
regards,
Kumar
Maybe you are looking for
-
Just installed 10.5,issues opening iphoto and everything in general is slow
I just finished installing Mac OS X 10.5 Leopard. I am noticing that everything is a little slower - even clicking on MAC HD - takes about 3-4 seconds to show all files/folders etc... The other thing, is since the install, i cannot open iPhoto!!! Say
-
My printer hp lj p1005 is working only on sharing
I have a printer hp lj p1005 is working on sharing but it is not working on the pc where it is installed what can i do ??? i have installed the proper full installation and my OS is windows XP
-
Please note the 'quote' above. That is the error message I receive. It asks me to click 'OK' to terminate the program, or click 'Cancel' to debug the program. Either button I click terminates the program.
-
Passing values between views in View Scoped Bean
I have a form page that uses a view scoped backing. This page forwards to a confirmation page that uses the same backing bean. I would like to redisplay the information to the user that they entered in the form and then process these values when they
-
Hi, I am trying to use a Pic18f4550 with the LabVIEW to communicate with an LCD display 4*20. All I need it to do is display text on the LCD screen, someone has done this kind of application that can tell me some tips on how to do this?