Change ownership of Vendor Consigment within an inspection lot

Dear Guru's,
My question is related to Vendor Consignment and Quality Inspection stock. We receive stock with Special Stock Type 'K' (Vendor consignment) and we create a stock relevant inspection lot.
My question is, is there a way to change the ownership and do a TP with MvT 411 within the inspection lot?
Does anybody has experience with this scenario? All possible solution are welcome.
Many thanks!
C.

Hi Carl,
Within the inspection lot, I think it's not possible. You need to clear the stock form quality first and then you may post it.
Or you can perform the stock posting (QA11) in such a manner that meets your requirement.
Regards,
Shyamal

Similar Messages

Upload vendor quality certificate to inspection lot

Hello,
I want to know the procedure to upload the vendor certificate to inspection lot in detail.
I have gone throught SAP library but didn't get much out of it.
Please explain me step by step process.
Mimiri

Refer to SAP help portal about quality certificate for goods receipt
http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/cff086e36711d1954300a0c930e04c/content.htm
In the material master
-'QM in procurement' is active
-A control key with certificate requirement is set
-A certificate type is specified
You can upload the vendor certificate to inspection lot through transaction QC51.
Regards
Luke

Change "Vendor batch" data in the inspection lot

Hi gurus,
I have created an inspection lot. It is created in automatic once the GR is made.
But, I have introduce the wrong "Vendor batch" and the inspection lot has the incorrect data there.
How I can change the "Vendor batch" data in the inspection lot?
This field is showed as greyed in the transaction QA02.
Many thanks in advance for your help!
Kind regards,
SP

Hi Sandra,
Iam not sure about the option to change the Vendor Batch but i can Suggest the other option. i.e Cancellation of GR and creating the new one.
1. First remove the 01 inspection type in Quality Management tab in Material master,
2. Go to goods receipt in MIGo and put 102 movement type and do the reversal.
Now the stock is in the order level. and you can do the GR again.
Activate the QM tab before doing the 2nd GR.
revert back for clarifications if any.

Update inspection lot when MIC changes

Hello Gurus,
Is there a way to update existing inspection lot when master characterstic changes?
Any help would be really appreciated!
Regards,
Owais

Hi
You can change the Existing Inspection plans by doing setting at Cleint level as Replace MIC
When you cahnge MIC it will give popup of where used.You can change the task lists.
But this changes will not automatically reflect in an inspection lot.
for this you have to
Go to Qa02
Enter Inspection lot
Click on reset
save
check status of lot CRTD in QA32
now go to QA02
enter
click on Inspection Specification
selct sample
save
check status in QA32 as REL
Regards
Sujit

Inspection lot per HU instead of batch in inter company stock transfers

Hello,
We are testing intercompany stock transfers and we face the following problem when we check inspection lots created at the receiving plant: one inspection lot is created for each HU, while we want one per batch.
We multiplied tests with many combination on material settings on inspection type 01 (which is inspection type used on inspection lot):
u2022     with or w/o u201CInsp. for HUu201D
u2022     u201CControl inspLotu201D: blank, 1, 2 or X
without success!
Letu2019s me precise that inbound delivery is created automatically from goods issue at issuing plant because we activated SPED functionality (then Hus numbers are directly taken from outbound delivery to inbound delivery).
Also we noticed something that could help understand the problem:
1.     when issuing plant picks HUs into the warehouse, they confirm TO via RF transaction (LM61). As a result, outbound delivery as a main item and there is a split by several sub items, as many as HUs confirmed
2.     when we test the picking confirmation out of a non RF transaction (LT12), there is a main item but only sub items per batch (qty is then aggregated)
What is maybe interesting to notice is in the first case, inspection lot at receiving plant is created per HU while in the second case, it is created per batch!
Second behavior is what we require but RF pick confirmation is mandatory for us!
Is there any chance to change QM behavior in that case?
Thank you,

Dear Gajesh,
thanks for your replay. It is very helpful.
Option A
1) The finish goods would be are already release and that does not go with our Q-policy.
2) Does this mean, I have an inspection lot at the point of time of GR from production to warehouse and another inspection lot at the time of delivery. That would mean I double my work? And the time of delivery happens one day after GR from production but the Q-results still need some more days. I do not see how this should work.
Option B
1) What do you mean by multiple GR to the warehouse storage location?
Where do I have to activate the copying option for the inspection lot?
Here I see the problem still existing. The result of the MIC has not been found out yet, the UD can not be done and I do multiple goods movement to the warehouse. What is the lelp? If I could make several stock transfer from the q-stock within the inspection lot that would be the best.
May I am thinking wrongly but the best would be to keep the stock in the q-stock. Does a suitable BAPI exist where I could program a logic to it or what do you think?
Thanks for your feedback,
Best regards,
Heinz

Quality inspection lot

Hello all,
Please tell me the step byb step process of QA02 transaction how to release the inspection lot .
Suggest,

QA01 - Create, QA02 - Change , QA03 - Display are used to create inspection lots manually.
Pre requesites
1) Activate inspection type in material master.
2) Activate inspection with task list, specification etc. as per requirement.
3) Create inspection plan for that material with usage as per inspection type.
Go to QA01 enter material plant and inspection type F8
You can create inspection lots manually for all inspection lot origins except the following:
10 (Delivery to customer with sales order)
11 (Delivery to customer without sales order)
12 (General delivery)
13 (Repetitive manufacturing)
14 (Plant maintenance)
Enter quantity and vendor, assign inspection plan and calculate sample size. Save. Inspection lot will be created.If inspection plan is assigned to insp. lot then it will be automatically REL.
If insp. plan is not assigned or sample size is not calculated inspection lot will be in CRTD status.
Go to qa02 inspection specification CLICK on task list assignment system will show u list of inspection plan available for this material or give msg that no inspection plan is present. go to qp01 create inspection plan. and then assign save
inspection lot will be in rel status now.

User Exit for MIGO during inspection lot creation

Hi Everyone,
I want to change the vendor number in the inspection lot while doing goods receipt for an outbound delivery in MIGO. Is there any user exit available to do this or can we do this in standard transaction?
Please guide me how this has to be done.
Regards,
Sugopa

i am working on 4.6c.
This BADI is not present there.
Any other solutions suggested.

Inspection lot quantity in manual inspection lot (T.Code-QA01)

Dear Experts,
I have activated inspection setup "89" with lot origin '89".I have activated this inspection set up to a material in QM view.
When i want to create a manual inspection lot through T.Code QA01, the inspection lot quantity is a required field. But i do not want to enter a quantity here. I want to create manual inspection lot without quantity. Is it possible?
If yes, please suggest how to proceed.
Your help is highly appriciable.
Regards
Vivek

hi
Use User Exit :QPL10001
Description
    You can use this enhancement to change all the fields when creating an
    inspection lot. The function module is only run once.
    You must be careful when using this enhancement since this can lead to
    inconsistencies in inventory management. For example, if you change the
    quantity fields.
Logic:
Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
I hope this will help you
Regards
Sujit

Inspection Lot + Notification List

Hi there,
I'm a "superuser" in a company that is trying to create a useful "vendor quality list".
It's quite annoying that the inspection lots and notification are so separated as they are today.
In QA33 you can get the inspection lots precision (for example 95 % approved inspection lots)
In different QM1X you can get notification info regarding header, defects and cause.
But where is the complete list - without exporting data to excel and spend time there..??
I have tried to connect tables in SQVI but it doesn't work completely.
I want a list showing:
Vendor - Material - Batch No - inspection lot - UD Decision - UD Date - Notification No (if any) - Notification Header (if any) - Defect (if any) - Cause (if any)
Any suggestions anyone? This cannot be a unique requirement for my company.
Greatful for any help.

Thanks SujitSND and Rene for your answers!
Rene, i have connected inspection lot with Notification Header without problem, but the problem starts when you continue to connect Defects (QMFE) and Cause (QMUR) tables as well.
Instantly when you connect QMFE you cannot "lefter outer join" and you cannot see the approved inspection lots without any notification connection (only shows 124 and 125 in example below).
I want my SQVI list to show me the following:
Insp lot 123 - UD approved
Insp lot 124 - UD rejected - Notification 234 - Notification header - Defect 12 - Cause 13
Insp lot 125 - UD rejected - Notification 235 - Notification header - Defect 13 - Cause 13
Insp lot 126 - UD approved
Insp lot 127 - UD approved
If you have the correct sollution for this issue i am very interesting to hear it!

QM-Delivery Inspection lot clubbing

Dear Gurus,
Is it possible to club the diiferent deliveris in to one inspection lot.
For example, presently system creates 1 inspection lot per delivery.
If user wants next delivery also linked to previous lot and no need of getting a new lot for the current delivery.
Is it possible.
Pls advice.
Siva

Hi Siva,
You can use the Control Inspection lot field within the inspection lot default values to determine when the system must create the inspection lot. Eg for each material document or each purchase order etc
Quality Management -> Quality Inspection -> Inspection lot creation -> Define default values for Inspection Type
Regards,
Roderick

Empty inspection lot field in co01

hi expert.
we have one big problem in co01 .
when we create an order the field inspection lot is empty.when we save or realse it inspection lot is empty.
what's the problem?

hi
Use User Exit :QPL10001
Description
    You can use this enhancement to change all the fields when creating an
    inspection lot. The function module is only run once.
    You must be careful when using this enhancement since this can lead to
    inconsistencies in inventory management. For example, if you change the
    quantity fields.
Logic:
Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
I hope this will help you
Regards
Sujit

Create Inspection Lot for Serial Number

Hello,
Is it possible to create an Inspection Lot and associate it to a Serial Number right away.
I've done a process were I've change the Material and Serial Number of my equipment, so now the old inspection lot is not usefull no more and I would need to have a new inspection lot so that the movement to place the stock on unrestricted is cone for the new inspection lot.
Or is that any other way to do this???
Thanks in advance.
BMO

Atul,
The inspection lot is created when the mobile is delivered from client and dismantled, and my stock gets increased for the returned material - that stock remains in Quality.
Later when the Usage Decision for the Inspection Lot is given (depending on the selection) my stock passes from quality to unrestricted, and this is the normal process without issues.
Possible exception:
If in the midle of the process I've to change the serial number for this mobile or to change the Material + serial number, the first Inspection Lot created is not helpfull to me because I can´t change there the Material or serial number. So the Usage Decision would be given for the old serial number, isn't it?
Today I found a Ztransaction that is used to create Inspection Lot. In the first step the material, goes in the warehouse in Quality and in the second step, when the Usage Decision is given, the stock passes from Quality to Unrestricted.
For the substitution Material / Serial number everything is correct, but for the first one it's not, should this obsolete stock goes to scrap?
Thanks,
BMO.

Inspection lot tab in qa14

dear sir
i have faceing problem change usage dicision overview when i click inspection lot stock tab in qa14 tcode insp.stock check box are disable can you any idea how will enable this check box
becase when i make goods recpt. fields qals-ismsk update X in dicator so problem of gr cancelation
and dispaly error message You cannot cancel GR, since inspection lot is already partly posted
with regrds
vijay karnatak

hi
In QA14 will only allow to change UD without changing Stock posting(Without history).
& stock posting is completed .So you can not enale it.
For this what you can is go to QA32 -->select lots with UD...enter plant & Material.
Go to Details & change UD
In Inspection lot stock...Check the Quantity if you have partially posted.
Post the remaining Qty if any.
Save
This will allow you to cancel GR (102 mvt) as QI stock becomes Nil
While cancellation og Gr pick Qty from Unrestricted & not from QI ( Blank & not X)
Regards
Sujit

Inspection Lot status not getting changed to LTCA from REL for SubCon scenario

Dear All,
For ERSA material 01 inspection type is active with indicator Post to inspection stock only as it can be purchased. No other indicator is set.
This material can be sent for repairing outside with DAMAGE valuation type (stock provided to Vendor with DAMAGE valuation type).
For SubCon scenario, Purchase Order with Account Assignment Category F and Item Category L has been created.
Once GR using MB01 with 101 movement, consumption posting takes place and as Insp type 01 is active Inspection lot is getting created with status REL CALC.
At this time, DAMAGE stock against Vendor is getting reduced with Qty of 543 movement.
Now when, reversal 102 with MB01 is done against Purchase Order and details are adopted with reference to 101 material document, reversal is taking place, but at the same time respective material doc's Inspection lot status is not getting changed to LTCA. It remains REL only.
For 122 return to Vendor using MBRL also, Insp lot status is not getting changed.
Has anybody faced such issue? Is this standard SAP?
Kindly throw light on the process, is correct process followed?
Regards,
Tanuj Parikh

Thanks.
Thru MBST Inspection Lot status changed to LTCA.
Why system is not cancelling thru MB01?

Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349

Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!

Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig

Change ownership of Vendor Consigment within an inspection lot

Similar Messages

Maybe you are looking for