Change Package For Many Bi Objects

Dear Gurus,
Before transformation, Is there any way to change package for many bi objects ?
Transport Coonection tab dont allow me to change package of these bi objects?
Cheers,

In the transport connection screen select the object -->send it RHS --> before changing the package make sure that object is not in any of the Transport request if so release the request using the Tcode :se09 and now select the object in the transport screen click on change package it will prompt a window where you can update the package and create TR for it.

Similar Messages

  • How to change package for Process chain

    Hi Experts,
               How do i change the package in the Transport connection. Iam transporting a PC from D to Q.
    1. I have some routines created in the infopackage.So i selected this one in the transport connection. I noticed under infopackages the following are also checked. a. infoobjects b. DataSource c. Infopackage d. Infopackage e. infosource f. transfer structure g. source system.will that cause problem in Q as I have them already in Q and P
    2. How do i change the package in the transport..Currentl all of them are &tmp. Please help me with the navigatioln steps.
    3. After clicking the truck icon, what shld i do ..do i have to transport the request as well. please provide me with steps.
    Thanks
    Dave
    Message was edited by: Dave Marcus

    1. I have some routines created in the infopackage.So i selected this one in the transport connection. I noticed under infopackages the following are also checked. a. infoobjects b. DataSource c. Infopackage d. Infopackage e. infosource f. transfer structure g. source system.will that cause problem in Q as I have them already in Q and P
    Ans : If you have ticked Transport Check button for Infopackage then only Infopackage is transported. Underlying Infoobjects, Transfer Structure etc. will not be transported.
    2. How do i change the package in the transport..Currentl all of them are &tmp. Please help me with the navigatioln steps.
    Ans : once you have pulled the necessary objects in the Transport Connection, Right click on the relevant object and select 'Change Package' to change the package from $tmp to others.
    3. After clicking the truck icon, what shld i do ..do i have to transport the request as well. please provide me with steps.
    Ans : Assign the Package by following question2, then assign Transport Request by clicking on the Truck Icon in Transport connection for the objects you have collected and then go to 'SE01' Transaction give the request number which you assigned in Transport connection and click on 'Display' which displays the request and all objects assigned to the request. select the Task Request and click on Truck icon which will release the task and then select the Main Request and click on Truck icon again which will release the main request.
    Thanks,
    Vamsi

  • How to change package for the program or t code if package not available?

    I have a T Code that was imported from ECC5 to BW system.
    This t code as well as its program have a package ZXYBC assigned in ECC5 system.
    However, the package that it was assigned (ZXYBC) does not exist in BW but exists in ECC5.
    Now I am not able to do any modifications (in the BW system)  to the T Code or its associated program as the Package ZXYBC does not exist in BW.
    Note: Change Object Directory Entry does not work.
    Any suggestions?
    Thanks.

    Open your main program of your TCODE in SE80 transaction.(Go to se93 transaction to get the program name for your TCODE).
    Right click on the root node.
    Other Functions->Change Package Assignment.
    GIve the new package name (THis package should be already created in your system).
    Regards,
    Ravi

  • Change package for Customer Exit

    How can I change a package for Customer Exit? I can't find the Cusomter Exits project by using SE80 transaction... :/

    Hi
    To change the package for the customer exit
    1) use tcode CMOD
    2) frm the GOTO menu , choose OBJECT DIRECTORY ENTRY.
    3.in the OBJECT DIRECTORY ENTRY , go to change mode , frm there u can change ur package also.
    Assign points if helpfull
    From
    ManesH

  • Changing Package for Authorization fields

    HI ,
    I assigned my Authorization fields to $temp while creating them , now i want to change the package and transport them can any one have an idea how to change the package for Authorization Fields.
    Regards,
    Abraham

    HI Arun,
    I think u r getting me wrong, Authorizatin object have Authorization fields associated with them , we create them in SU20 , when i created them i assigned them to $temp now i want to chage the package it is not allowing me to do that can any one help me on this..
    Regards,
    Abraham

  • Change package  for report & subobjects

    Hello,
    I have a report and a lot of subobjects(screens, tranzactions,statuses,titles,dict. objects...) as local objects. Now I want to reassign to a new package. If I use the change package option I have to do it for every subobject. Is there a way to reassign the package for the report and all his subobject in one step?

    hi
       try out for tcode se80 to change you local objects to anathor package..
    if you have lots of reports , transactions etc then go to
    se03->object directory->change object directory entries-> give ur objects
    and in package write $tmp to (ur package name)
    hope it helps
    Award marks if it helps

  • Change package for a table

    Hi friends,
               I need to change the package of a custom table that has maintenance generated for it. Can i copy the table to a new package using se80 or do i have to create a new table again.
    Thanks.

    Hi,
    check this :
    you can change the table or any object package from SE80 , no need to create new table or copying the table from one package to other. follow below steps to change the package of the table.
    Open the package in SE80 and right click on the tablename from database tables folder and select 'Object directory entry' and click on the change button to change the package .
    or from SE11 , select object directory entry from goto menu and change it.
    Regards
    Appana

  • Still have to change Context for EACH ODI Object

    Correct me if I'm wrong - Even though ODI touts the ability to have one set of code for various physical environments, it doesn't make moving from say DEV to TEST any much easier.
    What I mean to say is, even if I create 'InterfaceA' under the Logical Schema 'Phase1' and my Context is 'DEV' pointing to the Physical Schema for 'Development Data Server'; when I want to chance the Context to say 'TEST', I have to go into 'InterfaceA' and make that change to Context 'TEST'.
    Now, I have to do this for 'InterfaceA' through 'InterfaceXY' and so on for each Package, Scenario, Procedure and so on.
    Point being, there's not centralized mechanism to change all the Contexts for all the objects - therefore this functionality is nothing great.
    Might as well copy all the objects to a New Repository and change the Contexts there. Have a Master Rep for each DEV, TEST and PROD.

    What you need to do is ensure that you don't explicitly specify the context inside your ODI objects such as the interfaces. There is a setting called Execution Context which is what should be selected. Then when you execute your ODI scenarios you choose the execution context and this will be applied to all objects in the execution cycle

  • Change Capitalization For Many Cells at Once

    How can I change the captialization for many table cells at once. I can do it for one cell at a time by triple-clicking an choosing the capitalization menu within fonts, but if I select all the cells I want to change and then go to fonts>capitalization, the capitalization menu is dimmed.
    thanks,
    Jeff

    I'm a little confused by this thread. As Badunit describes, can't you just select multiple cells and make a menu pick?
    No need for formulas, right?  (unless it's a special situation of capitalizing the start of each sentence)
    SG

  • Exception Handling for many bean objects of a container class in a JSP page

    Hello,
    I have on container bean class. In this container class, there are several others class objects and the getter methods to get these objects out to the JSP pages.
    I have one JSP page which will use different objects in the container class object through the getter methods of the container class.
    My question is how to implement the exception handler for all the objects in the container so that the JSP page can handle all exceptions if occurrs in any object in the container?
    Please give me some suggestions. Thanks
    Tu

    Thanks for your reply.
    Since the container is the accessor class, I have no other super class for this container class, I think I will try the try catch block in the getter methods.

  • Best Practices for many Remote Objects?

    Large Object Model doing JDBC over RMI
    Please read the following and provide suggestions for a recommended approach or literature that covers this area well?
    N-Tiered Architecture
    JSP/Servlet (MVC) - Database Access Layer - Database
    Applets - JSp/Servlet Engine - Database Access Layer - Database
    Application Layer - Application Layer - Database Access Layer - Database
    I have an object model developed using Torque (A JDBC Object Relational modeling framework) for over 100 tables (to be over 160) that I am commencing to enable over RMI. I have got several remote methods up and running. For some of the simple methods starting up has been easy. Going forward I forsee issues.
    Each table has a wrapper or data object and a peer object that have setters/getters and special methods as desired. The majority of these classes are extended from Base Objects that have basic common functionality for retrieving, creating, and manipulating with a database using SQL.
    I have started building a Remote Interface and an Implementation class that invoke the necessary methods and classes within the Object Model to pull successfully off or update the database. Additionally the methods will need to return objects that represent non-primitive serializable dataobjects and collections of objects.
    Going forward client applications, servlets, and jsps will be using the database in more complex and comprehensive methods over rmi. Here are a couple of things I am concerned about.
    1) When to use java.rmi.server.codebase for class loading? In my implementation several of the remote methods will return objects (e.g Party, Country, CountryList, AccountList). These objects themselves are composed of other objects that are not part of the jvm. For all remote methods that return non-primitive objects must you include the classes in the codebase for the client to operate upon them. Couldn't this be pointless as you have abstract and extended classes all residing within the codebase? In practice do people generally build very thin proxy objects for the peer/data objects to hold just the basic table elements and sets?
    2) Server Versioning/Identity - Going forward more server classes will be enabled via rmi. Everytime one wants to include more methods on interface that is available must you update the interface, create new implementation classes, and redistribute the Remote Interface, and stubs/skels to client apps to operate on again? Is there some sort of list lookup that a client can do to say which processes are available remotely presently (not just at initialization)? As time changes more or fewer methods might be available?
    Any help is greatly appreciated.

    More on Why other approaches would be better?
    I have implemented some proxy objects for the remote Data Objects produced by Torque. To ease the pain, I have also constructed a proxy Builder that takes the table schema and builds a Proxy Object, an inteface for the proxy, and methods to copy between the Torque Data Object (which only lives on the server) into the Proxy Object (accessible by client and/or server).
    The generated methods are useable in the object implementing the Remote Interface but are themselves not remoteable. Only the Server would use these methods. Clients can only receive primitives, proxy Objects, or collections of ProxyObjects.
    This seems to be fairly light currently. I had to jump hoops to use Torque and enable remote apps to use the proxy objects. What would be the scaling issues that will come up? Why would EJBs with containers and all kinds of things about such as CMP vs BMP to be concerned with be a better approach?
    Methods can be updated to do several operations verses Torque and return appropriately (transactions). In this implementation the client (Servlet, mini App or App) needs the remote stub and the proxy objects (100 or so) to stand in for the Torque generated Data Objects. A much smaller and lighter set of classes, based on common JDK classes, instead of the torque classes (and necessary abstracts/objects/interfaces/exceptions for Torque).

  • Regarding Changing Package

    Hai Guru's
    can any body please help me
    how to change package for Data Dictionary Objects and remote Enabled Function Modules
    Thanks in advance

    Hi,
    For data dictionary goto se11>goto>object dict entry>change mode here u can chage ur package.
    and same pocessudure has been follow for FM also in SE37.
    Please reward if problem is solved.
    Amit.

  • Defining a Package for XI objects

    Hi,
        Can i Assign a package for all the objects that i Define in Integration Repository and Integration Directiory.
    Suppose if i create a data type, message type in IR and i have a package called zvarun created in SE80. so how do i assign these objects to my package.
    Regards,
    Varun

    Hi Mario Müller,
    Thanks for your reply.
    or else if i define structures in SE11 in ABAP Stack, can i use those structures for my data types in Integration Repository. If its possible, please let me know how can i do it.
    Regards,
    Varun

  • Change Package Identification

    Hello,
    Can anyone tell me the procedure to change the package identification for objects to another package in BW 3.5?

    Hi Sujeel,
    To Change package for an object in 3.5 goto EXTRAS menu at the top---> in that select OBJECT DIRECTORY ENTRY. then you can change the package what ever you want.
    Hope this is helpful.
    Rgds,
    Ravi

  • Can we apply attribute change run for datatarget (Master data )

    hi,
    can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
    pls advice how not to make the error repeat even after successful loading of master data.
    Thanks in advance, quick responce is greatly appreciated.

    Hi all,
    i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
    coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
    i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Maybe you are looking for