Change parameter for S812

Hi Experts
I want to change the parameters for variances. Which is as Belows. But confused what new value should I put.
My requirement is as belows.
Delivery Schedule Variance
>>>>>>>>>>     Current >>>>>>>                                          Change to
Variance 1     >>>>-5days        >>>>                                   2 or more days early from Scheduled Date
Variance 2     >>>>-2days       >>>>                                    1 day early from Delivery Date
Variance 3     >>>>+2days       >>>>                                     On Scheduled Date
Variance 4     >>>>+5days       >>>>                                     1 day late from Delivery Date
Variance 5     >>>>less than 5 or more than 5 days>>>>     2 or more days late from Delivery Date
Delivery Quantity Variance
>>>>>>>>>     Current >>>>>>>                                           Change to
Variance 1     >>>>-10%       >>>>                                    Greater than 10% less of ordered Quantity
Variance 2     >>>>-5%        >>>>                                    1 to 10% less of ordered quantity
Variance 3     >>>>+5%      >>>>                                      As per ordered quantity
Variance 4     >>>>+10%       >>>>                                     1 to 10% more than ordered quantity
Variance 5     >>>>less than 10% or more than 10%>>>>     Greater than 10% more of ordered Quantity
Variance 5 is default we have mentioned in parameters on variance 1 - 4. & 5 is automatically assumed.
Thanks,
Kiran
Edited by: KiranCG on Jan 31, 2012 7:25 AM
Edited by: KiranCG on Jan 31, 2012 7:27 AM

Hi Jurgen,
I understood about delivery on time. Thanks
I want to know about below
If I set below Variance
Variance 1   >>>>   2-
Variance 2   >>>>   1-
Variance 3   >>>>   1
Variance 4   >>>>   2
But
For example My po delivery date is 5th march & I receive material on 1st march then Variance 5 Will be used as per my understanding. ( But I want this 5 days variance before delivery date to show in Variance 1)
Also My po delivery date is 5th march & I receive material on 10th march then variance will Variance 5 Will be used as per my understanding. ( But I want this 5 days variance after delivery date to show in Variance 4)
In this case What should I do.
Also does report consider days or hours while calculation variance.
Edited by: KiranCG on Jan 31, 2012 12:30 PM

Similar Messages

How to create Function Module with TABLE parameter (for internal table)

Hi Guys,
I am trying to create a function module by using TABLE parameter. I have to pass an internal table to this function module for processing.
But it saying : TABLES parameters are obsolete!
And I am not going further.
Please suggest any work arround.
Thanks

Hi,
create a table type in SE11..
Then use that in your function module importing/exporting/changing parameter for passing internal tables..
Thanks,
Naren

Change a string parameter for different session

Hi Gurus,
I would like to find out how can I change a string parameter for an existing different session?
In DBMS_SYSTEM package there are two functions :
- SET_INT_PARAM_IN_SESSION
- SET_BOOL_PARAM_IN_SESSION
which change values of parameters, but not string ones :(
Is it possible and if not, is there an alternative for changing STATISTICS_LEVEL for different session to ALL?
Thank you in advance,
Ela

Hi,
>>Once again: how to change a string parameter for a DIFFERENT session?
Once again I will repeat if I was not clear before: You cannot to do this. Just directly using ALTER SESSION against the session.
* SET_INT_PARAM_IN_SESSION: Sets[u] integer-type init.ora parameters in any session
* SET_BOOL_PARAM_IN_SESSION: Sets boolean-type init.ora parameters in any session
Cheers
Legatti

Change Logs for TCODE -- FILE

Hi Friends,
    Please help me in finding the change logs for the TCODE FILE,
    i.e The changes made to the Logical paths
   I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
   But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar j

rec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick

Parameter for Current Month and Previous Month

I'm trying to create a parameter for current month and previous month based on the ex_date, but not sure what i'm doing wrong.
where ex_date = @SelectDate
I created a second dataset below for the values in the parameters.
SELECT Month(CURRENT_TIMESTAMP) AS 'Month', 'Current Month' as 'Current Month'
union all
SELECT Month(CURRENT_TIMESTAMP)-1 AS Month, 'Previous Month' as 'Previous Month'
Results
Month Current Month
3 Current Month
2 Previous Month
Once I preview it I get "Conversion failed when converting date and/ or time from character string" I changed the data type to "date/Time" but that did not make a difference. The date is convert (varchar(10), ex_date, 101) so looks like
11/12/2014.
I've also tried expressions like =month(now()) to pull current month with same error so i'm not sure what i'm doing wrong. Any ideas?

i tired this real simple report
in the first dataset - my main report query - select name from sysdatabases where month(crdate())=@month
in the second dataset - select month(getdate()) as Month1
in the parameters - choose int data type and available values - select the second data set
in the first data set- add this parameter..( i am assumming you know this, since you have done)
in the preview you should get the drop down with current month number - 3
and if you run the report, it will display the database names that were created in march. remember we are no checking year, so will get all that were created in march across the years.
Hope it Helps!!
I'm looking to have the dropdown say "Previous Month" and "Current Month" as a option. I know how to get the information in SQL, but not sure how this translates or put into a parameter.
Current Month
list_date BETWEEN
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()), 0)
AND
DATEADD(MONTH, DATEDIFF(MONTH, 0, GETDATE()) + 1, 0)
Previous Month
list_date between
CONVERT(varchar,dateadd(d,-(day(dateadd(m,-1,getdate()-2))),dateadd(m,-1,getdate()-1)),106) /* Last Month */
and
CONVERT(varchar,dateadd(d,-(day(getdate())),getdate()),106)

How to make a common parameter for two subreports in the main report.

Hi,
I have a crystal report which has 2 subreports in it. Both the subreports have the same code and I need to create a parameter for Project Cost in both the subreports for filtering the data.
When i create the same parameter in both the subreports, i see two parameters with same name on my prompt page while refreshing the report. however I just want 1 parameter on my prompt page and data should get filtered in both the reports.
Can anyone please suggest something, How can I do that? is there a way for sharing same parameter between two subreports?
Thanks!
Neha.

hi Neha,
here's how to do this:
1) create a new parameter with the same name on the main report
2) right click on your first subreport and choose Change Subreport Links
3) in the Field to Link To list drag over your new main report parameter
4) open the Subreport Parameter Field to Use select menu and choose your subreport parameter
5) repeat steps for the 2nd subreport
now you'll only get prompted once.
cheers,
jamie

How to change setting for 'last 5 password change prompt'

hi friends
in sap, when a user changes a password sometimes he/she gets a message "Please select a password that is different from last 5".
now i am in need to change this default value of "5" to "2" but i dont know what is the parameter name for changing this setting.
i would appreciate if anybody can tell me how to change this setting.
many thanks
regards

Hi nathan drake
The parameter for password history is login/password_history_size = 5
you can change to 2.
Regards,
Firoz.

Change logs for Z table.

Hi All,
I am trying to fetch the old value and new value for the z table field.Change log is activated for the Z table. but i dont know how to fetch the change logs.
SCU3 is the standard transaction to see the change logs for all the tables.
Is there any table where the change logs values are maintained?
Does anyone know how to get the change log value?
Thanks in advance.
Regards,
Amruta.

Hello,
If for a specific set of tables no change documents are triggered by SAP you can always setup your own Change Document Object with transaction SCDO.
Of course you need to be careful with this transactions (how big is the table data, how many changes, etc...).
Table logging is something else, they are stored in table DBTABLOG and can be analysed via SCU3.
For table logging you need extra system parameters to be set, they are explained in SAP Note:
Note 1916 - Logging table changes in R/3
Pay attention with table logging because a lot of tables are logged in DBTABLOG once you activate the parameter, this can have a major impact on performance.
To have an idea what other tables will be logged, check tcode SE16 on table DD09L and put an 'X' in field PROTOKOLL, result will be thousands of tables.
In your specific scenario I think it is best you go for the change documents with SCDO.
Wim Van den Wyngaert

ABAP for Super Dumps: Import- & Export-Parameter for a Table in a FM

Hello ABAP Profs,
sorry I am BW.
Import- & Export-Parameter for a Table in and out of an Function Modul.
I want to import a table into a Function Module, change it and export it again.
How do I have to define the Import- and Export- Parameters in the FM ?
The table looks looks this:
DATA: zvpshub_tab TYPE SORTED TABLE OF /bic/pzvpshub WITH UNIQUE KEY
/bic/zvpshub objvers /bic/zvpsoursy INITIAL SIZE 0.
Thanks a lot
Martin Sautter

Hi Clemens,
in SE11 I defined a datatype of Type Structure: ZVPSHUB_ROW.
in SE11 I defiend a datatype of Type Tabletype: ZVPSHUB_TAB,
bases on Rowtype ZVPSHUB_ROW.
in SE 80 I creates an FM with a CHANGEING Parameter referencing ZVPSHUB_TAB:
FUNCTION ZVP_SHUB_TAB_LOAD.
""Lokale Schnittstelle:
*" CHANGING
*" VALUE(SHUB_TAB) TYPE ZVPSHUB_TAB
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine of the Upload Rules in defined the table:
DATA:shub_tab TYPE zvpshub_tab.
in RSA1 in BW in the Startroutine i called the FM
CALL FUNCTION 'ZVP_SHUB_TAB_LOAD'
 CHANGING
 shub_tab = shub_tab.
and it works ..
Thank You
Martin Sautter

Can't display archive change documents for agreement (COND_B)

Hello,
I want to display archive change document for object class : COND_B (agreement) via transaction MEB3:
The archive works fine, and I can found the archive change documents form SARA.
(Archive Objetc = CHANGEDOCU
Archive info structure = SAP_CHANGEDOCU2 (is active))
But the display from the application transaction : MEB3 doesn't work.
In the DEBUG:
the Function module is called automatiquely: COND_B_DISPLAY_DOCUMENT
THEN SUBMIT RSSCD100
THEN The function module is called with the no parameter READ_CHANGEDOCU (ie with space value)
THEN the program reads only from DB
Question : HOW I oblige the program to read from the archive (READ_CHANGEDOCU = 'X') ?
I checked these SAP notes 1050935,1299903, 1308024, 1128954, 1050335
but no results.
May be I forgot some customizing ( SARA,, AOBJ )?
Thanks for your help.

Hi,
As I understand, the change documents archived using the CHANGEDOCU archiving object are no longer available using the application object.
Refer to Notes 1257133 and 140255 where they mention the above point.
If you want to read change documents along with the application, then you must first archive the change documents along with the application.
In your case, for agreements, you should use object SD_AGREEM so that the change documents also gets archived along with the agreements. Refer to note 761281 to check whether the archiving class CHANGEDOCU is already defined along with object SD_AGREEM in your system.
Hope this helps,
Naveen

Modifying Memory Optimization parameter for BPEL process in SOA 11g

Hello
I have turned on memory optimization parameter for my BPEL process in the composite.xml (11g)
this is what I have in composite.xml:
<property name="bpel.config.inMemoryOptimization">false</property>
How do we modify this parameter in the EM console at runtime? I changed this property to "true" using the System MBean browser, but it wasn't taking effect. I thought the SOA server must be restarted (similar to what we used to do in 10g). But when I restart the SOA server, the parameter goes back to whatever the value was in the composite.xml ignoring the change I made in the System MBean browser
Please share your thoughts.
Thanks in advance.
Raja

Deploying a newer version is not an option, as the endpoints could change (not sure if it would in 11g, but in 10g it does) and also, our service consumers will be pointing to the older version.As mentioned above, if clients are using URL without version then call will be forwarded to default version of composite internally. No manual tweaking required for this. Just make sure that while deploying the new version you are marking it as default.
Besides, we report on service metrics and having multiple versions just complicates things.Not at all. If you are not using versioning feature, you are really under utilizing the Oracle SOA 11g. Remember that metrics can be collected for a single composite with same effort, irrespective of the number of composite versions deployed. Only few product tables refer the version while storing composite name and rest all use only the composite name without version. I do not know how you are collecting service metrics but we use DB jobs for same it works perfectly with any number of composites having multiple versions deployed.
The idea is to do some debugging and collect audit trail in case there is a production issue by disabling inMemoryOptimization parameter. This is a live production environment and deploying whenever we want is not even an option for us, unfortunately. Why not debug by increasing log level. Diagnostic logs are the best option to debug an issue even in production. For getting audit trail you may re-produce the issue in lower environments. I think no organization will allow re-deployments just for debugging some issue in production until and unless it is too critical issue to handle.
Does this not supported in 11g? if it isn't, it does seem like a bug to me. You may always go ahead and raise a case with support.
Regards,
Anuj

"Changing" parameter and "Tables" parameter defintions in function module

If one defines "Changing" or "tables" parameters, they are treated as reference parameters.
It becomes obvious for "tables" parameters where one does not have option to check box for "Pass by Value". But for "Changing" parameters, they provide the checkbox for "Pass by Value". Even when you select this option, the function module seems to handle the parameter as a reference parameter (whatever changes you make to it in the function module are retained when you return back to a calling program).
My question is why then SAP has provided the checkbox of "Pass by Value" for "Changing" parameter?
Thanks.
Jitendra Mehta

Hi Chaiphon:
Thanks for explanation but I know the theory of "Pass by reference" versus "Pass by Value".
Let me rephrase my question.
When I use the importing parameter (say as a table with a dictionary table type) with reference (not "passing by value"), and if I modify the value of the parameter, the calling program (which calls function module) receives the changed value after the call.
When I use the importing parameter with "Pass by Value" box checked, the modifications made to the table inside the function module is not retained after the code leaves function module and returns to the calling program.
My question is why not the same behaviour with the "Changing parameter" in function module definition?
And if Changing parameters are always reference parameters, then why SAP has provided the "Pass by Value" check box?

How to change layout for list display in background

Hi All,
I want to change layout for the list display of tcode fbl1n when i execute in background. is there anyway to select our own layout when i execute in background. When i execute in foreground we can change the layout by selecting change layout button, but how it possible when in backgroung, is there any way please let me know.
Thanks in advance.
Regards,
Vishal

Hi,
Create a list variant by executing the program and changing the layout and saving..
Then use the "Layout" parameter in the selection screen and give the variant you created earlier...
Then while executing in background the list variant will be pickedup accordingly (given in the selection screen)..
Hope this helps...
THanks,
Naren
Message was edited by: Narendran Muthukumaran

Functional module /table vs changing parameter

Hi ,
I am working in release 6.0 .
In program i have internal table and i have to pass it's content to FM. In FM I tried to declare TABLE parameter but it was not accepted because table parameter is obsolete. I declare Change parameter. like it was suggested in error message dialog.The parameter is declared after same table like internal table from program .
When I run program I saw that only one record is passed to FM parameter. Question is how to pass whole body content of IT to FM parameter .
Thanks
Source code /
- gt_cartscan & cartscan are created after the same DB table.
loop at scantbl.
gt_cartscan-zzcartag = scantbl-zzcartag.
append gt_cartscan.
endloop.
call function 'Z_WM_UPD_ZDTS_GR'
changing
 cartscan = gt_cartscan.

Hi
See the below example:
types:begin of ty_employee,
pernr type pa0002-pernr,
begda type pa0002-begda,
endda type pa0002-endda,
vorna type pa0002-vorna,
nachn type pa0002-nachn,
end of ty_employee.
*// Declate a types for employee data table
types:tt_employee type standard table of ty_employee.
*//Declate a workarea to hold the Employee data
data: gf_employee type ty_employee.
*Declate a table to hold the Employee data
data: gt_employee type tt_employee.
Letz say the gt_employee has 5 records when it is populated.
Then you have all the records of gt_employee when called through below perform in the subroutine.
perform shuffle_records changing gt_employee.
*& Form SHUFFLE_RECORDS
 text
 <--P_GT_EMPLOYEE[] text
form shuffle_records changing p_gt_employee type tt_employee.
endform. " SHUFFLE_RECORDS
Regards
Raj

Change Documents for RAR

We use RAR 5.3 SP 14 and were wondering if there were any tables or reports that can show the change history upon mitigation added to a user. We can see the date that the mitigation was assigned to a user, but we can't seem to find the date when a mitigation was removed from a user.
For those that are questioning, we do use CUP for mitigations too, but we are mainly trying to find the change documents for RAR.
Thank you in advance.

SAP Answered
"In 5.3, there is no change log for mitigation control assignment. The only option in 5.3 is if you configure the Workflow option for Mitigation, then a request would have been routed through CUP for
this change and then you could search in CUP for the history of the change. Specifically, under RAR in Configuration - Workflow - Mitigation, if this parameter is set to YES, anytime you would
add, remove or change a mitigation for a user, a workflow item would be sent through to CUP for approval before the change is actually posted.
However, if you don't have this configured, there is no change log of mitigation changes.
There is no change log table in RAR to track mitigation changes, sorry. The change log information is not retained in RAR for changes to mitigations. The only "change log" information in RAR is for
Configuration and rules. This data is stored in table VIRSA_CC_CDHDR and VIRSA_CC_CDPOS. Again, this is only for changes to configuration and changes to rules. This is the only data that RAR tracks
changes for.
Changes to mitigations are NOT stored anywhere in RAR. Please let me know if there is any concern."

Change parameter for S812

Similar Messages

Maybe you are looking for