Change Password in SAP BI Portel.

Hello All,
Can anyone tell me how to Costomize the portel PAR File for setting a Tab(Change Password) for changing or resetting password.
We have BI NW 7.0 Portel with UME(user management environment) in ABAP.
Thank you in Advence.
Regards,
Nisha Jagtap.

Hi Eriki,
My problem is related to the WEB application server (WAS), not the Netweaver Portal.
BR
Kent

Similar Messages

Not able to change password in SAP WEB application server for BI 7 EHP 1.

Hi all,
I'm currently upgrading from BW 3.5 to BI 7 EHP 1.
When logging to SAP WEB application server to execute a WEB report, it's not possible to change password. Even when a initial password has been set, the user are not forced or able to change it.
Also to logon dialogue is more like a Windows pop-up than the Web based in 3.5.
Anyone having a clue?
Best regards
Kent

Hi Eriki,
My problem is related to the WEB application server (WAS), not the Netweaver Portal.
BR
Kent

Change password connect SAPR3 to MS SQL Server

hello.
want to change password for all logins in MS SQL Server.
how its correctly change password for SAP logins?
or where i can change password for SAP so, that we can work in SAP.
thank you.

Quote from SAP Note 50088
IIa Changing the password for the user 'sapr3'
If the OPS$ user has already been created as described above, the password for the 'sapr3' user can be changed at any time. As user <SAPSID>ADM, you must follow two steps (replace <new password> with the new password for the user 'sapr3'):
1. Stop the SAP System.
2. Log on as user <SAPSID>ADM to the host on which the R/3 database for the SAP System is running.
All the following actions have to be carried out on this host.
3. Change the entry for the user 'sapr3' in table SAPUSER.
a) Start sqldba72 (or svrmgr23, svrmgr30) and log on to the database with 'connect internal'.
b) Execute an update on the table SAPUSER.
'update OPS$<SAPSID>ADM.SAPUSER set PASSWD='<new password>'
where USERID='SAPR3';'
4. Change the password for the 'sapr3' user the database with the following commands:
'connect internal'
'alter user sapr3 identified by <new password>;'

How to enable change password feature in SAP Netweaver Portal 7?

Hi experts,
I would like to provide a change password link just beside the logout link after user had successfully logged in to Sap Netweaver portal. When user clicks that link, a change password screen sill appear to allow user to change his/her password.
Question:
1) How do i create a link in portal header just beside the logout link?
2) Is there any default change password page for Sap Netweaver Portal that I can use for this purpose?
Thanks,
Kenneth

Hi,
To get the change password link beside logout, get the masthead PAR file from portal, import into your NWDS, make the changes in the JSP and upload PAR file back to portal. Search with keyword "Masthead customization" in SDN. You will get many documents to achieve.
SAP has password change functionality available. Chekc the link below for details.
Re: Change Password Functionality
Regards,
Yoga

Changing the Password of SAP*

hI ,
    I forgot my SAP * password now I want to delete it from DB level
Database is MSSQL 2005 .Guide me with your detailed procedure
Stephen

Hello Lena,
Se38 > Creta a program
*& Report ZPSWRESET
*& Basis - 10.03.2007 - ikarayaka
REPORT ZPSWRESET_V1.
Tables: usr02, t000.
data: passwd like usr02-bcode.
parameters: user like usr02-bname.
select single * from usr02 where bname = user.
if sy-subrc <> 0.
write: / user, 'user does not exist!'. exit.
endif.
passwd = usr02-bcode.
clear usr02.
write: / 'The password of', user, 'updated in client:'.
select * from t000 where mandt <> '066' and mandt <> sy-mandt.
select * from usr02 client specified where mandt = t000-mandt and
bname = user.
    write: / usr02-mandt.
    usr02-bcode = passwd.
    usr02-ltime = sy-uzeit.
    usr02-bcda1 = usr02-bcda2 = usr02-bcda3 = sy-datum.
    usr02-bcda4 = usr02-bcda5 = sy-datum.
    usr02-UFLAG = ''. "change to the target client
    update usr02 client specified.
endselect.
endselect.
Changing the Password of SAP* ( all client )
Regards
ismail KARAYAKA

Com.sap.db.jdbc.exceptions.JDBCDriverException:user is forced to change password

Hi all
I am trying to connect hana using jdbc code
here is my code
          Class.forName("com.sap.db.jdbc.Driver");
            String url = "jdbc:sap://host:30015/?";
            String user = "Mujadid";
            String password = "Cloud123";
            System.out.println("try to connect to HANA !");
            Connection cn = java.sql.DriverManager.getConnection(url, user, password);
            System.out.println("Connection to HANA successful!");
            ResultSet rs = cn.createStatement().executeQuery("select * from _SYS_STATISTICS.STATISTICS_ALERTS");
            rs.next();
            System.out.println(rs.getString(1));
I am facing following exception
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [414]: user is forced to change password: alter password required for user MUJADID
at com.sap.db.jdbc.exceptions.SQLExceptionSapDB.createException(SQLExceptionSapDB.java:345)
Any suggestion?

Hi Mathan!
now above error is esolved
But i m facing following error when i try to read connections table from live2 schema
com.sap.db.jdbc.exceptions.JDBCDriverException: SAP DBTech JDBC: [259] (at 20): invalid table name: Could not find table/view CONNECTIONS in schema LIVE2
and this table exist in LIVE2 schema
Any suggestion?

Enable Personalize / Change Password LInk

Hi,
I want to enable personalize / change password link on EP.
Steps followed are:
--> Masthead iview personalize property is made true
--> UME action assigned to role & role is assigned to users.
Link followed: http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/0b1d50ec732d2fe10000000a11466f/frameset.htm
Still I cant see Personalize / Change Password Option in Masthead.
Regards,
Purav

Hi Purav,
Have you enabled Personalization radio button in masthead ivew ??
Try assigning the UME action Manage_My_Profile to your role. .
[Check this Link|Allow users to change their own password]
Regards,
Piyush

Changing passwords of OS Users

Hi Experts!!
I need to change passwords of OperativeSystem users (<instance>adm & SAPService_<instance>), the question is if it could affect portal functionally ??
Or there is something that I have to change into the portal?
Thanks in advance!
Yolanda.

this should help !!
http://help.sap.com/saphelp_nw04/helpdata/en/3a/4a0640d7b28f5ce10000000a155106/content.htm

Changing passwords of oracle users

Dear all
I wander is there any problem if changing password of oracle users SAPOWNER, system,sys . (I guess command for that is brconnect -u system/<password> -f chpass -o <sapowner> -p <password>
). What about sys and system. (I hope that after changing passwords the system will be functional)
Which user is used when "sqlplus / as sysdba"
thank you in advance

Hello Jan,
I wander is there any problem if changing password of oracle users SAPOWNER, system,sys
Well we already discussed the SAPOWNER here: http://forums.sdn.sap.com/message.jspa?messageID=10814500#10814500
If you change the password of SYSTEM or SYS there will be no problem at all. These users/password combination is not used in a SAP environment unless you explicitly specify the SYSTEM user and password in some BR*Tools calls like brconnect. If you just use the "/" default approach, the OS authentication mechanism (OSDBA) is used - so no issue there at all.
@Orkun:
This is not a user, but a role. So when you connect to the database by using "/as sysdba" you will be able to connect to the system by sysdba role not by a user.
If you use this apporach you are connected with the user SYS - so you are using a user for sure (and btw. you can only logon with SYS by using SYSDBA role). The only difference between "sqlplus / as sysdba" and "sqlplus SYS as sysdba" is, that you are using the specified OSDBA group with the first approach (so no password is required).
shell> pwd
/oracle/<SID>/11202/rdbms/lib
shell> grep dba config.s
# SS_DBA_GRP defines the UNIX group ID for sqldba adminstrative access.
        .rename H.16.ss_dba_grp{TC},"ss_dba_grp"
        .globl ss_dba_grp{RW}
T.16.ss_dba_grp:
        .tc     H.16.ss_dba_grp{TC},ss_dba_grp{RW}
        .csect ss_dba_grp{RW}, 3
# End   csect   ss_dba_grp{RW}
        .string "dba"
shell> sqlplus / as sysdba
SQL> SELECT sys_context('USERENV', 'SESSION_USER') FROM DUAL;
SYS_CONTEXT('USERENV','SESSION_USER')
SYS
shell> sqlplus SYS as SYSDBA
Enter password:
SQL> SELECT sys_context('USERENV', 'SESSION_USER') FROM DUAL;
SYS_CONTEXT('USERENV','SESSION_USER')
SYS
Regards
Stefan

SU01 change password ECC 6.0

We are ugrading from 4.7 to ECC 6.0. In ECC 6.0 the administrator's password reset through SU01 does not allow to check the green arrow to accept the changed password - no response when clicking the green check.
Reset has to been done inside the user master record (logon data) - any thoughts ?
SAP_ABA     700     17     SAPKA70017     Cross-Application Component
SAP_BASIS     700     17     SAPKB70017     SAP Basis Component
ST-PI     2008_1_700     0          -     SAP Solution Tools Plug-In
PI_BASIS     2005_1_700     17     SAPKIPYJ7H     PI_BASIS 2005_1_700
SAP_BW     700     19     SAPKW70019     SAP NetWeaver BI 7.0
SAP_AP     700     14     SAPKNA7014     SAP Application Platform
SAP_APPL     603     3     SAPKH60303     Logistics and Accounting
SAP_HR     600     22     SAPKE60022     Human Resources

See the solution:
su01 change password does not work Initial password (set by administrator)
Tks
Marcelo Venancio

Can you authenticate user/password from SAP to Active Directory

I don't want to implement SSO for ABAP because my company doesn't have the license for "SAP NW Single Sign-On"; but we would like to authenticate our users and their passwords to active directory. Our goal is to make sure the user/password in SAP is the same as their Active Directory user/password. Is this possible?
Thanks!

This has been discussed many times, for example see SSO with LAN UserID/Password. The short answer is no, you can't synchronize passwords. You can however achieve the requirement assuming you are using Identity Management to provision users and passwords to all systems (AD, SAP, etc). In that case you will have to deal with users changing their password. Recommendation is to enable SSO. If you don't want to get licenses for NWSSO, try to look at other options (X.509 certificates, SPNEGO in AS JAVA and then issue a Logon Ticket, 3rd party solution, etc).

Login as Root password problem (the changed password isn't working!)

I have enabled root user. I've changed my password for root user a couple of time and I am still not cable to login as root!! (username: root).
Any thoughts and help? thanks a lot! Alon.

Hello Stephen,
Change of password is not done via configtool. Configtool secure store just stores the current password which is taken by SDM during the deployment.
To change the password of the administrator user, you will need to enable SAP*. Please follow note Note 669848.
1. open the configtool: C:\usr\sap\<InstenceID>\JC<xx>\j2ee\configtool --> configtool.bat
ex: C:\usr\sap\J9E\JC09\j2ee\configtool ---> configtool
2. Activate the "super admin" and enter password(this is your choice) in configtool properties:
In Config tool: cluster-data>Global Server configuration>services--> com.sap.security.core.ume.service
find below ume properties and change values as i mentioned
ume.superadmin.activated=TRUE
ume.superadmin.password= < enter password>
3. Save the changes in configtool. click on Save button.
4. Stop the j2ee engine.
5. Start the j2ee engine.
6. Now you login to UME with username "SAP*" and password "what you entered in configtool"
7. After logging into UME Search for user "administrator" then unlock this user; or if you want to change password you can change it.
8. Goto config tool follow step 1:
9. Follow step2: and change ume property values as below:
ume.superadmin.activated=FALSE
ume.superadmin.password= (note: seta as default or blank)
10. Save the change setting in configtool.
11. Restart the j2ee engine ( Stop and Start).
12. Now login to user as "Administrator"; you will succussfully loging into ume;
Hope this helps.
Regards,
Snehal

UME change password in LDAP when this has expired

Hello,
I've configured SAP EP 2004 SP18, ume datasource is LDAP Active Directory, with SSL, and as administrator I can reset the password.
The problem appears when password is expired and the flag "user must change password" is marked in Active Directory and in the portal dosen't appear the form to the user to change the password.
If you read in ADS attribute "pwdLastSet" when is "0" means that the user must change password, I'm trying to map this attribute to ume attribute "passwordchangerequired", but it's not working, also are different formats.
The result is that in the portal login is not appearing the form to change the password when it's necesary, any ideas to map this active directory password or workaround...
Very thanks in advance.
Xavi.

same problem here ........ Iv'e set the UME expire date, and this works (kind of). The problem is that if both the Active Directory AND the UME are set to expire at 30 days, when the user logs on to the network on the 30th day, he is prompted to change his network password. Then as soon as he tries to log on to the portal he is prompted again (since the portal/ume doesnt know that the password has been changed in the active directory data source).
The user is prompted 2 times to change his password, and this is obviously confusing. And now his network password is different that what he just changed it to (since the portal / ume pw change changes the Act Dir password).
Any suggestions?
Thanks.

Change password for Domain\SAPservice SID and sid adm user

Hi guys
During NW711 installation, Ii gave OS User password different with master password.
Now i would like to synchronise the OS User password with master password(DDIC/SAP)
How to change the password for below users
SAP System administrator <Domain>\<sid>adm
SAP System Service User<Domain>\SAPService<sid>
Appreciate immediate response.
regards

Hi,
If I am not wrong you system is installed in windows. You can change the password in the domian controller under users OU or you can ask your domian administrator to change the same. But, I would recommend not to do this as after chaging the password the sap system will not start and you need to update the changed password in all the places wherever the mentioned IDs are used. For eg. in SAP_<SID> service and SAPOSCOL service.
Also, if the installation is in cluster then need to be more carefull and see where all need to update the changed password.
Thanks & Regards,
Sharath

Server fail to start aft changing password of SID ADM and SAPSERVICE SID

Please help, i change password of above 2 users on windows, then server fail to start.
Even after I change back to original password, the system still didn't start.
Please help as this is urgent.

Hi,
sap service is not start in windows due to password change.
click on start -> run -> services.msc
navigate to service SAPSID_<instance_nr>
right click on that -> properties -> logon
provide the correct user password here.
proceed same for SAPOsCol service
regards,
kaushal

Change Password in SAP BI Portel.

Similar Messages

Maybe you are looking for