Change path for context file 11i (11.5.10.2)

Hi ,
How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?

How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?You cannot change the location of the context file and it is always defaulted to $APPL_TOP/admin directory in 11i release. Any reason you want to change this location?
Thanks,
Hussein

Similar Messages

Jdeveloper 11.1.1.5 - how to change path for log file for Disk quoto exceed

I am trying to deploy to my jdev integrated webserver and am getting Disk quoto exceeded error.
How do I change the path so it goes to /scratch/<user>/ ... or something other than /home/<user>
<Jul 7, 2011 1:53:01 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Handler: '/home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log' raised exception when flushing.
Caused By: weblogic.store.PersistentStoreFatalException: java.io.IOException: Error syncing file, Disk quota exceeded, errno=122
#### Cannot run application TravelRequestApplication due to error deploying to IntegratedWebLogicServer.

Set the USER Home directory as explained here:
http://download.oracle.com/docs/cd/E21764_01/install.1111/e13666/ojdig.htm#BDCJCHDF

Change path for temporary file

Hi !
During an iMovie project, export directly to iDVD fails because the free disk space that is used (system disk) is not sufficient (about 10GB).
It's possible change the temporary file pointing to a external drive that has lots of free space?
The situation is the configuration:
- Disk System with about 10GB free
- External firewire disk where saved the project and imported movie with 200GB free
Thank you in advance for solution.

GGVideo wrote:
..It's possible change the temporary file pointing to a external drive that has lots of free space?
No.
UNix apps store their tempfiles preferred on the 'system partition' of your harddrive.
on my setup. ALL libraries (= the Gigabytes of iTunes, iPhoto, iMovie...) are external.. free your int. HDD is best advice ..

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How to change path for Ev4Excel.xla

Dear All,
I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
Ev4Excel.xla is resided under path E\PC_MS.
How can I change path for macro call?
Or any other idea?
Regards,
Ender

i don't understand why do you have to change the path for Ev4Excel.xla?
Basically this the addin of BPC into excel. I mean it is the BPC excel client.
You are choosing the path when you are performing the installation of SAP BPC.
So Idon't understand why do you want to change the path?
If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
You error is not related to the path it is more related to rights.
I think you have to provide more details about the steps done and in what condition you observer this error.
Regards
Sorin Radulescu

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

Invalid Path for target file, check if connector is deployed correctly

Hi all,
I've got a tricky problem over here: we are using OMB scripts for generating simple extract mappings that just copy data from an oracle source table to a flat file on a directory. Up untill now ( with version 11.1 ) this did not pose any troubles, but now we are using 11.2 for the first time and we don't get the mappings to execute. Generating, validating and deploying all works fine, only executing fails with the error: "Invalid Path for target file, check if connector is deployed correctly". It ends to rapidly, so I'm assuming the problem lies in the repository and not on the database itself.
I'm pretty sure all locations are defined as needed, flat file operator in the mapping has correct location, the flat file module has the same location,...
I tried almost everything: recreate oracle module, recreate flat file module, unregister and recreate db location, unregister and recreate dir location, recreate mapping and flat file, export/import...
The strange thing is, I was able to execute a mapping once. Although it ended with an error (due to a function in the mapping), it created the file correctly. After that I needed to update the directory path of the target location and from then on, I always got the error above, and I don't see a good reason.
Any suggestions??
Tnx,
Michel

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

INVALID PATH FOR TARGET FILE - 11g

I had several mappings that's need to run almost all of my mappings got this same error,
OWB Owner: owb_rpo_ev04
User Owner: owb_rpu_ev04
h2. "INVALID PATH FOR TARGET FILE, CHECK IF CONNECTOR IS DEPLOYED CORRECTLY"
-Flat File Location has been indicated
-Locations has been deployed
-Files Location has been deployed
-Physical Location has been created
Two mappings is working prefectly without any error, but to several mappings the one with Flat Files Location are the one with the error when executing. I already grant permission owb_rpu_ev04 to UTL_FILE. I even create a synonym for UTL_FILE the i can used "ECT_FILE"
Files are in FTP,
h2. partial script
OUTPUT_FILE ECT_FILE.file_type;
FILENAME VARCHAR2(50);
FILEPATH VARCHAR2(50);
email_subject VARCHAR2(200);
email_body_hdr VARCHAR2(10000);
crlf VARCHAR2(2) := chr(13)||chr(10);
OWB_FAILURE_RUN EXCEPTION;
PRAGMA EXCEPTION_INIT (OWB_FAILURE_RUN,-20000);
PROCEDURE CHK_EXECUTION (EXEC_FLAG IN NUMBER) AS
BEGIN
IF EXEC_FLAG = 3 OR EXEC_FLAG = 4 THEN
RAISE OWB_FAILURE_RUN;
END IF;
END;
BEGIN
FILEPATH := 'ECTDM_EV04_OUTFILE_DIR';
-- ECTBusiness.csv
ECT_RUN_BATCH_MAP1 ( 'PLSQL', 'ECTDM_IN_M_BUSINESS_L1', 'OWB_RPU_EV04_LOCATION', 'ERROR_DETAILS', 0, EXEC_FLAG, 'A','DM');
CHK_EXECUTION (EXEC_FLAG);
Edited by: ellenore on Apr 26, 2012 5:52 AM
Edited by: ellenore on Apr 26, 2012 6:03 AM

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

Change Logs for TCODE -- FILE

Hi Friends,
    Please help me in finding the change logs for the TCODE FILE,
    i.e The changes made to the Logical paths
   I had tried Utilities---->change logs , but unfortunately i cannot find any changes logs
   But there are changes made to the logical paths in my system but i cannot see them in change logs
thanks
chandrasekhar j

rec/client is a profile parameter, you can view the settings in transaction RZ10. However I find program RSPARAM more useful, the report lists all system parameters with their default and altered value. Also if you double-click on a parameter you can get to the full help text for its meaning.
The parameter essentially switches on table change logging for configuration tables (based on the technical settings of the table) and has to be set before the changes are made.
Hope this helps.
Nick

Using relative path for in file/ftp adapter

Hi All,
How to have a relative path for file/ ftp adapter's inbound/outbound operation?
Example: Consider $ORA_HOME = /home/oracle --> This environment variable can be different on different machines
i want to drop a file in to $ORA_HOME/folder1/folder2 (Or poll for a file).
<partnerLinkBinding name="FTP">
<property name="wsdlLocation">FTP.wsdl</property>
<property name="out_dir" type="LogicalDirectory">What do i write here???</property>
<property name="retryInterval">60</property>
</partnerLinkBinding>
if i cant configure this in partner link section or in activation agent sction, how else do i achieve this?
i am using 10.1.3.* version.
Thanks in advance.
Roshan.

You can achive it using the deployment scripts if the directory is changing on the basis of the environment
If you want to change at run time than you can use the jca properties to set using the variables at runtime.
Regards,
Ajay

Relative Path for JSP Files

I use Liferay Portal. It has a defined directory structure for all portlets and expects files to be in their proper locations. One of these is that it expects all .jsp files to be in the /webroot/html directory.
The problem is that all references in the struts-config.xml to .jsp files are assumed to be relative to the /html directory. So if, for instance, I set the path as /test/test.jsp then Liferay looks for the file in /html/test/test.jsp. But NitroX requires the full path, including the /html.
I've gotten this to work on another competing product - in that product I set the Web Root to be the /html directory and it works great. That product allows you to set the path of the struts-config.xml separately. Is there any way to do something similar with NitroX? I tried changing the webroot in the .m7project file manually but it doesn't like it. It seems to insist that the struts-config.xml file is in the webroot.
Thanks.

NitroX currently supports only a war directory structure. When a project is created, the Web Application Root directory is computed as the directory containing the WEB-INF folder (which should contain the web.xml file).
All web app resources (JSP files, image, css files, etc) are expected to be under the Web Application Root directory (at any nested directory level).
We will enhance this behavior in the future to support arbitrary directory structures.

F4 Help to get the path for a File source directory

There are numerous function modules for browsing a particular file in desktop and getting the file path (including the fine name) , like F4_FILENAME , KD_GET_FILENAME_ON_F4 , WS_FILENAME_GET etc. But can anyone tell me how to fetch only the directory path to the field were the F4 help is given. Actually the filename has to come in some other field in the selection screen. Is there separate funtion modules for these OR will changing parameters in the above function modules work?
Pls Help....
Also are there function modules for providing F4 help for getting the path to a file in application directory?

Try this method CL_GUI_FRONTEND_SERVICES.
It is a Global CLASS which is having different methods for different purposes
see the documentation of it and use the methods of it
see
CL CL_GUI_FRONTEND_SERVICES
Short Text
Frontend Services
Functionality
The class CL_GUI_FRONTEND_SERVICES contains static methods for the following areas:
File functions
Directory functions
Registry
Environment
Write to / read from clipboard
Upload / download files
Execute programs / open documents
Query functions, such as Windows directory, Windows version, and so on
Standard dialogs (open, save, directory selection)
Example
Determine the temp directory on your PC:
DATA: TEMP_DIR TYPE STRING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
CHANGING
TEMP_DIR = TEMP_DIR
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2.
IF SY-SUBRC 0.
Error handling
ENDIF.
flush to send previous call to frontend
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC 0.
Error handling
ENDIF.
WRITE: / 'Temporary directory is:', TEMP_DIR.
Notes
The class CL_GUI_FRONTEND_SERVICES is based on the Control Framework. See the documentation for more information, in particular on CL_GUI_CFW=>FLUSH which must be called after many CL_GUI_FRONTEND_SERVICES methods.
Migration Information
The old file transfer model was based on function modules of the function group GRAP. The old features have been replaced by the class CL_GUI_FRONTEND_SERVICES. The following list contains the old function modules (italic) and the new methods (bold) that replace them:
CLPB_EXPORT
CLIPBOARD_EXPORT
CLPB_IMPORT
CLIPBOARD_IMPORT
DOWNLOAD
GUI_DOWNLOAD, dialog replaced by FILE_SAVE_DIALOG
PROFILE_GET
No replacement, use REGISTRY_* methods instead
PROFILE_SET
No replacement, use REGISTRY_* methods instead
REGISTRY_GET
REGISTRY_GET_VALUE, REGISTRY_GET_DWORD_VALUE
REGISTRY_SET
REGISTRY_SET_VALUE, REGISTRY_SET_DWORD_VALUE
UPLOAD
GUI_UPLOAD, dialog replaced by FILE_OPEN_DIALOG
WS_DDE
Obsolete: This function is no longer supported.
SET_DOWNLOAD_AUTHORITY
Obsolete: This function is no longer supported.
WS_DOWNLOAD
GUI_DOWNLOAD
WS_DOWNLOAD_WAN
Obsolete: This function is no longer supported.
WS_EXCEL
Obsolete: This function is no longer supported.
WS_EXECUTE
EXECUTE
WS_FILENAME_GET
FILE_SAVE_DIALOG, FILE_OPEN_DIALOG
WS_FILE_ATTRIB
FILE_SET_ATTRIBUTES, FILE_GET_ATTRIBUTES
WS_FILE_COPY
FILE_COPY
WS_FILE_DELETE
FILE_DELETE
WS_MSG
Obsolete: This function is no longer supported.
WS_QUERY
CD (current directory)
DIRECTORY_GET_CURRENT
EN (read/write environment)
ENVIRONMENT_GET_VARIABLE
ENVIRONMENT_SET_VARIABLE
FL (determine file length)
FILE_GET_SIZE
FE (check if file exists)
FILE_EXIST
DE (check if directory exists)
DIRECTORY_EXIST
WS (determine Windows system)
GET_PLATFORM
OS (operating system)
GET_PLATFORM
WS_UPLDL_PATH
Obsolete: This function is no longer supported.
WS_UPLOAD
GUI_UPLOAD
WS_VOLUME_GET
Obsolete: This function is no longer supported.
Reward points if useful.

Changing path of multiple files in iTunes.

I have a fun one for you. Every time I have an update for iTunes, it decides that it randomly no longer wants to recognize certain songs on certain playlists on my iPhone. The latest episode decided that of the 25k songs in my library it wanted to do it for about 2k of them. The best part is that they are all songs on playlists. So there are random songs from thousands of albums that have this as their path: file://localhost/C:/Users/Brian/Music/iTunes/iTunes Media/etc.....
I have all of my music on an external drive, and changing the path for all of my music to the default and then reassigning it to the external drive does not work.
What I would like to do is select all of the songs that have this path and change them all at the same time so that I don't have to spend 2 days doing it one song at a time. Any insight?
Thank you!
Actually here's an update - upon exploring the folder that each of the files should be in, I have come to find that iTunes has magically deleted all of the files from my computer and from my hard drive. They are still on my iPhone.....wow, incredibly annoying.

Take a look at this page from microsoft, it has one of three Methods to solve your problem (note they are talking bout installing a different product, but the error messages are the same):
http://support.microsoft.com/kb/894510

Dynamically change path to OLE file

I want to dynamically change the path of an OLE object that I am inserting into a report (word document). I am going through all the steps in the help but it is not working. I am on Crystal XI. Has anybody successfully done this?

Hi,
I have the same problem with Crystal 2008.
I have insert OLE object Insert -- Ole Object I search my file and click Collegamento, but if I modify the file in report I don't have a file changed, and if I change Path in a Picture Path I don't have change.
I see always the same file than I have import.
Sorry for my Inglish.
Please Help me.
Serena

Change path for context file 11i (11.5.10.2)

Similar Messages

Maybe you are looking for