Change path for temporary file

Hi !
During an iMovie project, export directly to iDVD fails because the free disk space that is used (system disk) is not sufficient (about 10GB).
It's possible change the temporary file pointing to a external drive that has lots of free space?
The situation is the configuration:
- Disk System with about 10GB free
- External firewire disk where saved the project and imported movie with 200GB free
Thank you in advance for solution.

GGVideo wrote:
..It's possible change the temporary file pointing to a external drive that has lots of free space?
No.
UNix apps store their tempfiles preferred on the 'system partition' of your harddrive.
on my setup. ALL libraries (= the Gigabytes of iTunes, iPhoto, iMovie...) are external.. free your int. HDD is best advice ..

Similar Messages

Change destination for Temporary File cache?

I am using latest FCS versions with Compressor 3.0.2. I am exporting a 1-hour HDV file from FCP for HD DVD disk using the H264 Multipass 10.3Mbps setting. I found to my cost that a temporary file is generated which is about 2x the final file size (i.e. about 8.5GB) and this is saved on my startup disk at user/library/caches/temporaryitems. I didn't have that much space so my 30-hour rendering was aborted.
Now I value the space on my startup disk! OSX and FCS has already been hogging huge chunks of it!!
Anyway, my question is does anyone know if it's possible to relocate this temporary file to another disk?
Thanks

GGVideo wrote:
..It's possible change the temporary file pointing to a external drive that has lots of free space?
No.
UNix apps store their tempfiles preferred on the 'system partition' of your harddrive.
on my setup. ALL libraries (= the Gigabytes of iTunes, iPhoto, iMovie...) are external.. free your int. HDD is best advice ..

Jdeveloper 11.1.1.5 - how to change path for log file for Disk quoto exceed

I am trying to deploy to my jdev integrated webserver and am getting Disk quoto exceeded error.
How do I change the path so it goes to /scratch/<user>/ ... or something other than /home/<user>
<Jul 7, 2011 1:53:01 PM PDT> <Notice> <Log Management> <BEA-170019> <The server log file /home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>
Handler: '/home/<user>/.jdeveloper/system11.1.1.5.37.60.13/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log' raised exception when flushing.
Caused By: weblogic.store.PersistentStoreFatalException: java.io.IOException: Error syncing file, Disk quota exceeded, errno=122
#### Cannot run application TravelRequestApplication due to error deploying to IntegratedWebLogicServer.

Set the USER Home directory as explained here:
http://download.oracle.com/docs/cd/E21764_01/install.1111/e13666/ojdig.htm#BDCJCHDF

Change path for context file 11i (11.5.10.2)

Hi ,
How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?

How to change the context file path in 11i. I have tried 2 methods "perl adbldxml.pl tier=apps appsuser=apps" and perl adclonectx.pl contextfile=/u01/visappl/admin/vis_gold.xml , it works and I can see the s_context var in .xml changed to new path . But when I ran adconfig.sh it revert back the changes to old path.
Anyone faced this issue before ?
/d01/visappl/admin/vis_gold.xml to /u01/visappl/admin/vis_gold.xml ?You cannot change the location of the context file and it is always defaulted to $APPL_TOP/admin directory in 11i release. Any reason you want to change this location?
Thanks,
Hussein

:-) How can we change the default file path for Bank file ( dmee ) ?

Hi All,
We encounter a problem.
Electronic bank file ( created after a F110 run ) are created, in an automatic way to the DIR_TEMP directory. ( On the SAP server )
How can we change the default file path for Bank files ( dmee ) ?
We'd like to specify another path.
Thx for your help.
Erwan

Hello,
Make sure that you have created the directory in transaction code AL11 with the help of basis consultants.
You can link your PC directory to the application server.
You can maintain the path whether your file needs to get saved in OBPM4 against your DMEE structure example GB_BACS etc.
If you do not maintain any path in OBPM4, then the file gets saved to temporary directory. If you give the directory path name in OBPM4, then the file gets saved to that directory with numbers 0001, 0002, 0003 etc till it reaches 9999 and reset from the beginning.
If you give the path as well as file name as ABCD, then the file gets generated to that directory folder with ABCD0001, ABCD0002, ABCD0003 etc. till it reaches ABCD9999 and reset from the beginning.
Hope this solves your problem.
Regards,
Ravi

How to change path for Ev4Excel.xla

Dear All,
I'm trying to execute predefined BPF - custom menu (ProcessFunctions.xls). Whenever if click e.g. on Back, forward, open a file following similar message is being prompted:
Macro 'E:\Program Files\BPC\Ev4Excel.xla'!'EvMacroCall "OPENFILE","REPORTS\WIZARD\HotAnalysis\A01 Account Trend.xls","","","","","" can not be executed. Macro may not stated in this workbook or all macros can be deactivated.
Ev4Excel.xla is resided under path E\PC_MS.
How can I change path for macro call?
Or any other idea?
Regards,
Ender

i don't understand why do you have to change the path for Ev4Excel.xla?
Basically this the addin of BPC into excel. I mean it is the BPC excel client.
You are choosing the path when you are performing the installation of SAP BPC.
So Idon't understand why do you want to change the path?
If you want to do this you have to reinstall the BPC client and you have to choose the path wanted.
You error is not related to the path it is more related to rights.
I think you have to provide more details about the steps done and in what condition you observer this error.
Regards
Sorin Radulescu

How to create search path for the file on the desktop..

hello experts..
      I have used gui_upload module to upload the data from flatfile to the internal table, in that how can i create search path for the file selection in the selection screen, also please help me the code to update the ztable.
thanks

HI
If iam not wrong you want to select a file from a location that you don't know so if this is ur problem then use the function module
F4_FILENAME
this FM helps to locate and select the desired file from the system.
Sample code that you can check is
How to get windows filename
PARAMETERS: lv_file LIKE rlgrap-filename.
Method 1
    CALL FUNCTION u2019KD_GET_FILENAME_ON_F4u2019
    EXPORTING
    MASK = u2019,.txt,.*u2019
    STATIC = u2019Xu2019
    CHANGING
    FILE_NAME = LV_FILE.
Method 2
CALL FUNCTION u2019F4_FILENAMEu2019
EXPORTING
         program_name = syst-cprog
         dynpro_number = syst-dynnr
         field_name = u2019 u2019
     IMPORTING
         file_name   = LV_FILE.
Regards
Pavan

Unable to save PDF's from Internet Explorer. Error "The document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk."

We are currently in a published desktop environment in Citrix XenApp 6.5. Server is running on Windows 2008 R2. Users are not able to save PDF's into the redirected folders (ie Desktop or My Documents). Exactly same issue described in "The disk you were saving to or the disk used for temporary file is full...." Anyone has any suggestion??

Same problem here. Any ideas?
Saving with Shortcut "CRTL+SHIFT+S" works just fine.
Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

Invalid Path for target file, check if connector is deployed correctly

Hi all,
I've got a tricky problem over here: we are using OMB scripts for generating simple extract mappings that just copy data from an oracle source table to a flat file on a directory. Up untill now ( with version 11.1 ) this did not pose any troubles, but now we are using 11.2 for the first time and we don't get the mappings to execute. Generating, validating and deploying all works fine, only executing fails with the error: "Invalid Path for target file, check if connector is deployed correctly". It ends to rapidly, so I'm assuming the problem lies in the repository and not on the database itself.
I'm pretty sure all locations are defined as needed, flat file operator in the mapping has correct location, the flat file module has the same location,...
I tried almost everything: recreate oracle module, recreate flat file module, unregister and recreate db location, unregister and recreate dir location, recreate mapping and flat file, export/import...
The strange thing is, I was able to execute a mapping once. Although it ended with an error (due to a function in the mapping), it created the file correctly. After that I needed to update the directory path of the target location and from then on, I always got the error above, and I don't see a good reason.
Any suggestions??
Tnx,
Michel

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

INVALID PATH FOR TARGET FILE - 11g

I had several mappings that's need to run almost all of my mappings got this same error,
OWB Owner: owb_rpo_ev04
User Owner: owb_rpu_ev04
h2. "INVALID PATH FOR TARGET FILE, CHECK IF CONNECTOR IS DEPLOYED CORRECTLY"
-Flat File Location has been indicated
-Locations has been deployed
-Files Location has been deployed
-Physical Location has been created
Two mappings is working prefectly without any error, but to several mappings the one with Flat Files Location are the one with the error when executing. I already grant permission owb_rpu_ev04 to UTL_FILE. I even create a synonym for UTL_FILE the i can used "ECT_FILE"
Files are in FTP,
h2. partial script
OUTPUT_FILE ECT_FILE.file_type;
FILENAME VARCHAR2(50);
FILEPATH VARCHAR2(50);
email_subject VARCHAR2(200);
email_body_hdr VARCHAR2(10000);
crlf VARCHAR2(2) := chr(13)||chr(10);
OWB_FAILURE_RUN EXCEPTION;
PRAGMA EXCEPTION_INIT (OWB_FAILURE_RUN,-20000);
PROCEDURE CHK_EXECUTION (EXEC_FLAG IN NUMBER) AS
BEGIN
IF EXEC_FLAG = 3 OR EXEC_FLAG = 4 THEN
RAISE OWB_FAILURE_RUN;
END IF;
END;
BEGIN
FILEPATH := 'ECTDM_EV04_OUTFILE_DIR';
-- ECTBusiness.csv
ECT_RUN_BATCH_MAP1 ( 'PLSQL', 'ECTDM_IN_M_BUSINESS_L1', 'OWB_RPU_EV04_LOCATION', 'ERROR_DETAILS', 0, EXEC_FLAG, 'A','DM');
CHK_EXECUTION (EXEC_FLAG);
Edited by: ellenore on Apr 26, 2012 5:52 AM
Edited by: ellenore on Apr 26, 2012 6:03 AM

That error is displayed when the generated code fails to execute with one of the following database errors;
UTL_FILE.INVALID_PATH
UTL_FILE.INVALID_OPERATION
UTL_FILE.INVALID_FILEHANDLE
So its worth checking the generated code for that map and searching for the code around UTL_FILE.FOPEN and seeing what the path and the file name in the code are. Maybe the file is created with permissions such that it can be created but not then re-written and its an OS permissions thing (such as UMASK settings).
Cheers
David

Space for temporary files

Hi,
how much of free space should be provided for temporary files. Is it depends on the app's ? If yes, any estimation ?
Thanks.

How much space is your Other using? You may be able to reduce.
How Do I Get Rid Of The “Other” Data Stored On My iPad Or iPhone?
http://tinyurl.com/85w6xwn
With an iOS device, the “Other” space in iTunes is used to store things like documents, settings, caches, and a few other important items. If you sync lots of documents to apps like GoodReader, DropCopy, or anything else that reads external files, your storage use can skyrocket. With iOS 5/6, you can see exactly which applications are taking up the most space. Just head to Settings > General > Usage, and tap the button labeled Show All Apps. The storage section will show you the app and how much storage space it is taking up. Tap on the app name to get a description of the additional storage space being used by the app’s documents and data. You can remove the storage-hogging application and all of its data directly from this screen, or manually remove the data by opening the app. Some applications, especially those designed by Apple, will allow you to remove stored data by swiping from left to right on the item to reveal a Delete button.
 Cheers, Tom

Folder Specified for Temporary Files is not Available

Whenever I start PS CS, I get a "The Folder Specified for Temporary Files is not Available" error message. How do I fix this?
Thanks!
JB

>F is internal.
Doesn't proof that it's working. Disable it (as a scratch disk). See what happens.
Rob

Unable to save PDF. The disk used for temporary files is full.

I just started getting the "Document could not be saved. The disk you were saving to or the disk used for temporary files is full. Free some space on this disk and try again, or save to a different disk" message.
I am running Windows 8. I've seen fixes for this on the Internet for previous versions of Windows on the Internet, but haven't seen one that works for Windows 8. Help, please.

Same problem here. Any ideas?
Saving with Shortcut "CRTL+SHIFT+S" works just fine.
Using IE 11.0.9600.17728 and Adobe Reader 11.0.10

The specified file or folder name is too long,the url path for all files and folders

The specified file or folder name is too long,the url path for all files and folders must be 260 character or less
can we increase this limit?
MCTS,ITIL

Hi,
As I understand, you want to increase the length of URL path in SharePoint 2010.
Per my knowledge, this limit cannot be increased. SharePoint limits URL length because all relative URL links are stored in the clear forms on the SharePoint content DB and often this links are used as primary keys to link one table with another. Fields
which are used to store these links (for instance tp_DirName from the AllUserData table) allow storing only 256 characters.
There are several ways that you can resolve or mitigate URL length problems in the SharePoint Server 2010 environment. The following list provides suggestions:
1. Upgrade all the end-user browsers to Internet Explorer 8, which has a longer URL length limit.
2. Use shorter names for sites, folders, and documents and control the depth of the site and folder structures to reduce the lengths of URLs.
3. If possible or allowed, use ASCII names for sites, folders, and documents. This will avoid situations where the URL will be lengthened by being encoded.
4. To reduce the risk that the SharePoint Server 2010 end-users will encounter problems because of URL length limitations, we recommend that you apply the following effective limits in the deployment:
256 Unicode (UTF-16) Code units - the effective file path length limitation, including a domain/server name
128 Unicode (UTF-16) Code units - the path component length limitation
More reference:
http://technet.microsoft.com/en-us/library/ff919564(v=office.14).aspx
http://sharepointknowledgebase.blogspot.in/2013/04/url-path-length-restrictions-in.html#.VKJN53BJA
Best regards,
Sara Fan

F4 Help to get the path for a File source directory

There are numerous function modules for browsing a particular file in desktop and getting the file path (including the fine name) , like F4_FILENAME , KD_GET_FILENAME_ON_F4 , WS_FILENAME_GET etc. But can anyone tell me how to fetch only the directory path to the field were the F4 help is given. Actually the filename has to come in some other field in the selection screen. Is there separate funtion modules for these OR will changing parameters in the above function modules work?
Pls Help....
Also are there function modules for providing F4 help for getting the path to a file in application directory?

Try this method CL_GUI_FRONTEND_SERVICES.
It is a Global CLASS which is having different methods for different purposes
see the documentation of it and use the methods of it
see
CL CL_GUI_FRONTEND_SERVICES
Short Text
Frontend Services
Functionality
The class CL_GUI_FRONTEND_SERVICES contains static methods for the following areas:
File functions
Directory functions
Registry
Environment
Write to / read from clipboard
Upload / download files
Execute programs / open documents
Query functions, such as Windows directory, Windows version, and so on
Standard dialogs (open, save, directory selection)
Example
Determine the temp directory on your PC:
DATA: TEMP_DIR TYPE STRING.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GET_TEMP_DIRECTORY
CHANGING
TEMP_DIR = TEMP_DIR
EXCEPTIONS
CNTL_ERROR = 1
ERROR_NO_GUI = 2.
IF SY-SUBRC 0.
Error handling
ENDIF.
flush to send previous call to frontend
CALL METHOD CL_GUI_CFW=>FLUSH
EXCEPTIONS
CNTL_SYSTEM_ERROR = 1
CNTL_ERROR = 2
OTHERS = 3.
IF SY-SUBRC 0.
Error handling
ENDIF.
WRITE: / 'Temporary directory is:', TEMP_DIR.
Notes
The class CL_GUI_FRONTEND_SERVICES is based on the Control Framework. See the documentation for more information, in particular on CL_GUI_CFW=>FLUSH which must be called after many CL_GUI_FRONTEND_SERVICES methods.
Migration Information
The old file transfer model was based on function modules of the function group GRAP. The old features have been replaced by the class CL_GUI_FRONTEND_SERVICES. The following list contains the old function modules (italic) and the new methods (bold) that replace them:
CLPB_EXPORT
CLIPBOARD_EXPORT
CLPB_IMPORT
CLIPBOARD_IMPORT
DOWNLOAD
GUI_DOWNLOAD, dialog replaced by FILE_SAVE_DIALOG
PROFILE_GET
No replacement, use REGISTRY_* methods instead
PROFILE_SET
No replacement, use REGISTRY_* methods instead
REGISTRY_GET
REGISTRY_GET_VALUE, REGISTRY_GET_DWORD_VALUE
REGISTRY_SET
REGISTRY_SET_VALUE, REGISTRY_SET_DWORD_VALUE
UPLOAD
GUI_UPLOAD, dialog replaced by FILE_OPEN_DIALOG
WS_DDE
Obsolete: This function is no longer supported.
SET_DOWNLOAD_AUTHORITY
Obsolete: This function is no longer supported.
WS_DOWNLOAD
GUI_DOWNLOAD
WS_DOWNLOAD_WAN
Obsolete: This function is no longer supported.
WS_EXCEL
Obsolete: This function is no longer supported.
WS_EXECUTE
EXECUTE
WS_FILENAME_GET
FILE_SAVE_DIALOG, FILE_OPEN_DIALOG
WS_FILE_ATTRIB
FILE_SET_ATTRIBUTES, FILE_GET_ATTRIBUTES
WS_FILE_COPY
FILE_COPY
WS_FILE_DELETE
FILE_DELETE
WS_MSG
Obsolete: This function is no longer supported.
WS_QUERY
CD (current directory)
DIRECTORY_GET_CURRENT
EN (read/write environment)
ENVIRONMENT_GET_VARIABLE
ENVIRONMENT_SET_VARIABLE
FL (determine file length)
FILE_GET_SIZE
FE (check if file exists)
FILE_EXIST
DE (check if directory exists)
DIRECTORY_EXIST
WS (determine Windows system)
GET_PLATFORM
OS (operating system)
GET_PLATFORM
WS_UPLDL_PATH
Obsolete: This function is no longer supported.
WS_UPLOAD
GUI_UPLOAD
WS_VOLUME_GET
Obsolete: This function is no longer supported.
Reward points if useful.

Change path for temporary file

Similar Messages

Maybe you are looking for