Change plan help?

Well last night I realized I went over my minutes 700 Nationwide FS Lines are minutes are now 821/700, so I called a Verizon agent and she said I could change my minutes making it to be 20.00 charge in stead of the 55.00 overage charge and that I could use them right away,well I just talked to an agent online and she said the 1400 mins that I want will be added on my next bill cycle and that I have to pay the over charge fee, I want all my lines on the 1400 plan that will be another 10.00 because line three and then the 82.00 for the 1400 minutes, I don't want to pay the 50.00 I rather just do the minutes but I rather have them now,oh the lady I talked to on the phone also added that I can change my plan to 1400 for this bill and then switch back over to 700 on my next bill the days left on my bill now are 25/31 and I am just confused on what to do.

Thanks to the community members for your suggestions. Adding to what was stated, if your billing cycle has not closed, you want to make sure you change the calling plan by backdating it to the beginning of your current bill cycle. This way you have the full 1400 minutes allowance for your current calling period before the bill cycle closes. Additionally, your next bill will show the calling plan change with the you paying the difference between the 700 minute plan to the 1400 minute plan. The changing of the calling plan can help avoid overage charges as long as you did not exceed the 1400 plan selected based off your current usage. Bear in mind, the 1400 minute plan gives you free 10 Friends & Family numbers giving you added value. I would suggest staying on the better of the two plans depending on your usage of your phones.

Similar Messages

  • I have taken a 12 month membership for cc and photoshop.  I now see that adobe are offering the same product for only $9.99 per month including lightroom, whereas I am paying $19.99 a month. Is it possible to change plans without any penility payments.

    I have a monthly membership to Photoshop CS6 costing $19.99 per month on a 12 month membership.  I now see that Adobe are offering the same product for only $9.99 per month.  Is it possible to change plans with any extra costs to me. Thankyou

    Hi rjmo
    Yes, you can switch to the Creative Cloud Photography Plan without penalty.
    Please check this doc for the differences between this plan and the Photoshop single app plan you have currently: Photoshop Help | Differences between Photoshop and Creative Cloud Photography Programs
    Let me know if you wish to proceed with the switch and I can arrange it.
    Thanks
    Bev

  • Change planned order - MD12

    Hi,
    What is the function of 'assign version' from the list of 'edit' in MD12 - change planned order.
    Is there a way to change the BOM revision level assigned by MRP run?
    Currently MRP assign the most recent revision level to a planned order, and I would like to be able to change it to a previsious revision level.
    Thanks
    Lin-Lin Li

    Hi,
    "Assign Version" is like the reading Master data in Planned Order.
    Now try this. in your Pl. Order Change Screen,  slect Master data Tab pag.
    Then try the "Assign Version", your BOM details in the lowerpart of the screen vanishes.
    You will get the message saying "Explosion data has changed, please re-explode" if you confirm this by Pressing Enter.
    Then the BOM details dat will go off and you can select another PV.
    Otherwise directly you can change the PV in the entry screen itself.
    Hope this helps..
    Regards,
    Siva

  • Query to find SQL with changed plans

    I am trying to find out which SQL statements have changed plans since they were first executed.
    I'm trying to run this on all databases from 9i upwards and I am assuming that I have no licensed access to the AWR. However, Statspack is installed on all databases. (So querying things like STATS$SQL_PLAN is fine).
    I am having difficulty understanding what HASH_VALUE, OLD_HASH_VALUE and PLAN_HASH_VALUE are, and how they can be used to help answer the problem. I am also trying not to use SQL_ID, since that column isn't there in 9i (I think), and I'd like something that is generically usable from 9i to 11g, if at all possible.
    Any hints, please.
    Edited by: Catfive Lander on May 14, 2012 12:01 AM

    Hi Sakshi,
    Try out this query if it can help you !
    SELECT a.user_name, a.description, c.responsibility_name, c.creation_date as ASSIGNED_DATE>FROM apps.fnd_user a,
    >apps.fnd_user_resp_groups b,
    >apps.fnd_responsibility_vl c
    >WHERE a.user_id = b.user_id
    >AND b.responsibility_id = c.responsibility_id
    >AND a.creation_date < = '01-JUN-07'
    ORDER BY a.user_name;Thanks,
    Anchorage :)

  • Wanted to change plan but before changing the subs...

    My login id is xxxxxxxxxxxxxxxxxx
    I was subscribed to Europe Unlimited Landline in 27 Nov 2014 and now wanted to change plan to Europe Mobile and Landline. But before I change it the previous subscription got renewed automatically few minutes before.
    can you cancel the the renewed plan and refund the balance amount? So I will resubsribe to proper plan. Thanking you. Please urgently do he needful.
    Mahendra Chavan, India

    mahendrachavan wrote:
    I was subscribed to Europe Unlimited Landline in 27 Nov 2014 and now wanted to change plan to Europe Mobile and Landline. But before I change it the previous subscription got renewed automatically few minutes before.
    can you cancel the the renewed plan and refund the balance amount? So I will resubsribe to proper plan.
    Hello and welcome to the Skype Community.
    Your account shows that the automatic renewal of your Unlimited Europe 1 month Subscription has been reversed.
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Trying to change plan but no chat or email customer service available

    Since I cannot email this question (there is no email option) and the Chat option never works I am asking these questions here.
    I thought I would be able to change my plan simply, since there is a "change your plan" page, but the only option they offer is to add more service for a more expensive plan.
    I want to
    1.)   take one of my phones off of my plan. I currently have 3 phones on a plan but I want to remove one. This option is not available, or I couldn't find it.
    2.)  I want to swap numbers with two of the phones. The phone/number I want to take off the plan is in better shape than one of the other phones.
    So I want to remove the phone but keep using that phone with one of the other numbers.
    I don't want to speak to a customer service rep and have them try to sell me anything or upgrade anything or sell me insurance or whatever. I have been trying to access chat all day but there's no agents available. I notice there's other posts on here with the same complaint. and of course there's no email, even though many other customers have complained about that too.

    i have three phones on my plan.
    i want one of them removed.
    in fact, i haven't used the phone in three months and when you call it you get a "not in service" message.
    but the phone i still listed on my bill and I am still paying the (ludicrous) surcharges and taxes and line fees.
    there is absolutely no reason why i shouldn't be able to change my plan online, without talking ot anyone.
    there are hundreds of complaints about your lack of email. there are hundreds of complaints about customer service chat and customer service in general. look it up.
    this is simple
    1) i want one of my phones removed from my plan (3-1=2)
    2) i want to know how much it will cost for the two remaining phones.
    3)i want to be able to contact a customer service rep through email
    4) i want to be able to look at the different plan options online and be able to change them online.
    5)really nice of you to offer help but ... on twitter? really??? facebook too? no thanks.
    why don't you just have the availability on your website to change plans and offer email customer support?

  • I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I am trying to authorize my computer and I get an error message: The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. Help?

    I used Terminal to change the permissions on the folder in question.  I followed the instructions in this article:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    In my case, the folder was there, so I needed the command to change permissions on the folder, not to create one.   I was hesitant to use Terminal b/c I know that if I made an error I could wipe out my hard drive or render my computer unusable.  So to be SURE I didn't make an error, I carefully copied the command from that page and *pasted* it into Terminal.  Also, before I could do anything in Terminal, I had to go change my admin password (it had been a blank password before and that's not acceptable for making changes in Terminal).  I was just super careful when entering my password or doing anything else while Terminal was open (making sure I didn't accidently hit the spacebar or another key, etc.)  And it fixed the problem right away.
    What was confusing for me was that the iTunes error message said to change permissions in the FINDER, which is what I was trying to do.  It didn't mention Terminal.  What would really be helpful is if Apple included a link to a page like this in their error message.

  • How to change planning plant in Maintenance order

    Hi experts ...
    In maintenance order , depending on equipment , the planning plant gets defaulted . If Equipment is installed in another FL whose planning plant is different , the order's planning plant doesn't change (Greyed) . Is there anyway to change planning plant in orders
    NPB

    We have maitenance and planning plant same .Equipment was in maintenance plant XYZ and planning plant XYZ earlier . Now the same equipment is in maintainance plant ABC and planning plant ABC . In order , I am able to change maintenance plant  to ABC , but unable to change the planning plant to ABC .
    If I do not change planning plant and change only maintenence plant , what are the effects in cost reporting ? Since ultimately cost is settled to equipment cost center (which is now changed to ABC cost center) , I feel there will not be any effect . Old planning plant may only affect search right ? ....Please advise ...
    NPB

  • Change Planning file entry

    Hi,
    How can I change Planning file entry or selection? For a material, earlier I have selected the following in MD20
    1. NETCH
    2. NETPL
    4. Reset order proposal
    5. BOM explosion.
    Now I want to deselect BOM explosion , how can I do that?
    Sincerely,
    Ketan

    Hi,
    Run MRP in MD02 with Planning mode as 3 - Delete.
    This will delete the planning file entry of the material
    then create the planning file entry manually by
    MD20  - Create planning file entry
    MD21  - Display planning file entry
    MDAB - Set up planning file entry in background
    MDRE -Check planning file entry
    Regards,
    R.Brahmankar

  • How to change search help for standard field in me51n.

    hi frnds,
              I want to change search help option for 'Advice code' field under Additional DFPS tab in me51n. But i dont know how to change or add search help for standard field. so plz help..
    best regards,
    sudip biswas

    Hi Abhi,
    Try using any one option:
    Create a Search Help in SE11.
    Now Goto SE11 -> Enter Ztable -> Select that field -> Click Search Help and try to assign the created Search help to that field in your Ztable explicitly
    OR
    Create a Zdata element in SE11.
    In Data Element, under Further Characteristics tab, enter Name  Parameters of Search Help.
    Assign this data element to that field in ur Ztable.
    OR
    Create a Zdomain and maintain a Value Table or Fixed Values for it.
    Assign this domain to that field in ur Ztable.

  • BAPI to change planned orders details

    Hi Experts,
    I need BAPI to change Planned order details,which are created through SNP PPM's.I searched for Bapi and got one 'BAPI_MOSRVAPS_SAVEMULTI3'  but this BAPI will change order details if created for PP/DS PPM's.
    Kindly suggest will this BAPI only work or someother.
    I want to keep the PPM name blank and save the order details through BAPI.
    Pls reply asap.
    Thanks
    surbhi

    Hi Surbhi,
    You may please search on google, there are lots of tutorial on BDC, you will surely get the solution... in short BDC is to record a transaction & then use same recording to generate ABAP program & you can play with screen navigations & update the fields you required...
    Regards,
    Adarsh

  • Is it possible to change Planning Plant in General Task list

    Hello Gurus,
    Is it possible to change Planning Plant in General Task list, ie. for eg.
    Earlier I have General Task list Group:22, Group Counter:1, with Planning Plant:0001 & now i want to change/update new planning plant 0002 instead of old 0001 in the same task list.
    could you plz suggest me, is it possible? & how to do changes?
    Thanks in Advance.
    Regards,
    Amol

    HI Amol,
    Its not possible to change the Planning plant , You can delete that task list or you can put deletion flag on it, and go for new creation
    Riyaj

  • HT2478 Too many pictures in screensaver folder - can't change it - help?

    I loaded too many pictures inside a folder for screensaver and now I can't seem to select another folder.  It stops responding when I try to change.  Help?

    abe_house wrote:
    Ok.  Maybe we are not being clear.
    a) the home (user library) optionkey>finder>go>library>screen savers is empty.
    Apparently you do not have any custom savesavers.
    b) the HD>library>screensaver folder is empty (same as above?)
    Not the same.  HD is system (what the system uses to run your comp or system files you have transferred from another computer). 
    Home (user Library) are files that you personally use.
    As for the screensaver folder being empty, that's ok.
    c) the HD>system>library>screensaver folder has lots of saver files in it (althought they all look to correspond with savers that are not slideshows, e.g., Flurry)
    I've never moved any of these files and can't think how I would have ever done this accidentally.  Maybe this is too technical.
    You seem to be ok as far as your screensaver mappings.
    Can you give me a file to search for - maybe I can locate e.g., the Ken Burns photo slideshow screen saver.
    Ken Burns slideshow is part of iPhoto.  However, to actually find it takes a lot of legwork. 
    Machintosh HD>System>Library>PrivateFrameworks>Slideshows.framework>Versions>A>Resources>C ontent
    >Styles>KenBurnes.mrbStyle.  Click on the folder>Contents>Resources>Preview.mov is the Ken Burns photo slideshow!
    Although I am not new to Macs, I am new to Mountain Lion. I depend on a book called, OS X Mountain Lion: The Missing Manual - David Pogue .  This book is very easy reading, non technical & non geeky.  I strongly recommend this book as it takes you step-by-step through Mountain Lion. 
    Since you are new to Macs, take full advantage of your warranty & purchase AppleCare for that piece of mind.  Out of warranty resources:  There is Apple’s own Knowledge Base Articles:  http://support.apple.com/kb/index?page=search 
    The OS Help Menu.
    Apple’s troubleshooting website:  Mac 101

  • Why I can't change on the settings ,I cloud ,advanced l, mail and then email address there I can't change ? Help please

    Why I can't change on the settings ,I cloud ,advanced l, mail and then email address there I can't change ? Help please?

    You can't change that address by design, but Apple allows you to create another two addresses and use instead they call those aliases and you can create and use those different for different people with the same account. Instructions here
    http://support.apple.com/kb/ph2622

  • I have windows 7 64 bit and install firefox 4 .my problem is after install firefox , icon firefox change please help me

    I have windows 7 64 bit and install firefox 4.after install firefox for one day firefox icon change please help me.
    Thank alot

    See the following  -
    Creative Cloud Help / Error downloading Creative Cloud applications
    http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html

Maybe you are looking for

  • Fastest way to create a broker instance in GlassFish V3?

    Hello, is there an easy way to launch OpenMQ in GlassFish V3 so that the broker creates the configuration file glassfish-v3\glassfish\domains\domain1\config\init.conf\imq\instances\imqbroker\props\config.properties Edit: the first thing I noticed in

  • 6x4 photos print with picture off the end of the page

    HP Deskjet F2480 with Snow Leopard I have tried to print 6x4 photos from iPhoto and the preview appears correct but the photo comes out with the top of the picture missing and a white band on the other end. I called HP and they suggested I uninstall

  • New subscription

    I bought a new subcription, since I had one that expires every 3rd of the month and I finish my minutes so bought another one, but it says i have no more minutes..What can i do?

  • Spatial operator issue

    Hallo, I have a general question. I am using a spatial operator. There it is a general rule that the first parameter must come from a indexed table and the second need not to be indexed. As far as good. The other rule is that the first parameter shou

  • No aparecen las carpetas de mis imagenes

    me he visto obligado a formatear el portatil y desde entonces el iPad y el iPhone son un caos, por ejemplo no consigo que aparezcan las carpetas de mis imágenes, para organizar las fotos, ruego ayuda, por favor. Muchas gracias y muchos saludos.