Change planning plant in production order

Hi Gurus,
my business scenario is the following:
I have 2 plants that are assigned to 2 different company codes. Plant A (ordering plant) and Plant B (supplying plant).
The users place a sales order on plant A and through MRP with special procurement key 80 the planned order is turned into a production order in plant B.
But in the order confirmation the system tries to post the GR in plant A. Is there a way to change the planning plant of the production order at any time i.e in order creation or order confirmation? Because I need the GR against the production order to be done in plant B. Since the subsequent posting according to the business scenario would be after production, the goods should be sold from Plant A to Plant B via a sales order.
Your help would be greatly appreciated.
Panos

Hi Panos,
SPK 80 doesn't suit your requirement, since by design it is doing GR in the ordering plant.
Alternatively you need to work with a SPK like 40, that is stock transfer from B to A. Just set up the intercompany process for this stock transfer.
This way, when MRP in A detects a need for replenishment, a stock transfer requisition from B to A is created. Then MRP in B will create a planned order for production (that you will convert into a production order later). GR is in B. The stock transfer requisition is converted into a stock transfer order, and the actual transfer takes place.
Check also this for more details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2d4d44af11d182b40000e829fbfe/content.htm
Regards,
Mario

Similar Messages

How to change planning plant in Maintenance order

Hi experts ...
In maintenance order , depending on equipment , the planning plant gets defaulted . If Equipment is installed in another FL whose planning plant is different , the order's planning plant doesn't change (Greyed) . Is there anyway to change planning plant in orders
NPB

We have maitenance and planning plant same .Equipment was in maintenance plant XYZ and planning plant XYZ earlier . Now the same equipment is in maintainance plant ABC and planning plant ABC . In order , I am able to change maintenance plant to ABC , but unable to change the planning plant to ABC .
If I do not change planning plant and change only maintenence plant , what are the effects in cost reporting ? Since ultimately cost is settled to equipment cost center (which is now changed to ABC cost center) , I feel there will not be any effect . Old planning plant may only affect search right ? ....Please advise ...
NPB

Error Message V1810 - Make to Order No Change delivery plant in Sales Order

Hello, for a client where I'm setting the flow intercompany , but i have an error on the Sales Order when I must be change delivery plant.
Scenario: Make to Order, Product configuration, Sales Order BOM created by CS60
Step:
1 - I create sales order fo company X delivery plant 1000
2 - Creates Order BOM on plant 2000 Company Y
3 - creates MRP Planned Order
4 - Convert Planned Order to Production Order
For different issues can happen that you decide to ship the goods to a different plant than the X. Production Plant remains 2000.
If I try to change the plant on the Order system stops me with the following error:
Message V1810 - Plant can no longer be changed
Diagnosis
The plant can no longer be changed in the Following situations:
The item has been assigned to a project.
There is a production order for the order item but it is not a staticassembly order.
Already have accrued costs.
For the very complex structure of the product I can not delete the production order and sales order BOM.
How do I handle these cases?
Can anyone help me?
Best regards
Giuseppe

Hi Guiseppe,
can you please answer some questionsa to understand your requirement.
if you want to transfer the goods from plant to plant you can do it through Stcok transfer MB1B t code.
1.then why you want to change the plant? in which element you are trying to do in sales order or production order?
2.you mention it as intercompany and MTO can you be clear for whoom you got the sales order(internal or External Customer?

Changing the Assignment of production order in sales order in MTO scenario.

Hello all!
I have following problem:
After the MRP a production order was created for a sales order. Because of the production in another plant
the production order which was created automatically had to be technically completed and a new one
created.
If you want to check now the availability, the sales order finds nothing, because it's linked to the one,
which was technically completed. Now is the question how can I change the production order for this
sales order. (In the production order the correct sales order is connected!)
As I found out it's connected to the field AUFNR in the table VBEP. But how can I change this
field within a transaction and not in the database?!?

No replies

Capacity planning and schedulng production order based on availabe capacity

Hi Gurus,
I am trying to use capacity planning, when the production order is created it takes the order start date as the requirement date. Then when i do he capaity check it says capaity not available. After finite scheduling again it proposes to shift operations by certain days.
I need the capity to be check in MRP and the palled orders to have start dates based on aviable capity, currenty all the palled orders are starting on the requirement date irresptive of avaiabe capaity. I tried using finite scheduling option in MD02 still it does not take in to account exsting production orders for giving dates of the planned orders.
Regards
Abhi

Dear Abhishek,
1) This is Std SAP of MRP, only material Av check will be carried out in MRP & create procurement
Proposals
2) Capacities will not Checked ( consider ) in MRP in Std R/3
3) Your Need can be only met through APO
Regards
Madhu

How to change the plant in the order

Hi,
I want to change the plant in the order....when i tried fast change in edit,am getting plant cannot be copied message 1236
But for the order there is no further documents generated,i have created and saved now i want to change the plant....
Any options pls
Venugopal

Hi,
As per your statement, you have just created Sales Order (w/o reference) and no further processes have been done(i.e. Delivery or billing etc..)
Then, you may change it with T.code: VA02.
Or simply delete the item from the order, maintain right plant with Company Code, Material Master, Sales Area and re-enter it in to Sales order.
Best regards,
Amit.

Is it possible to change Planning Plant in General Task list

Hello Gurus,
Is it possible to change Planning Plant in General Task list, ie. for eg.
Earlier I have General Task list Group:22, Group Counter:1, with Planning Plant:0001 & now i want to change/update new planning plant 0002 instead of old 0001 in the same task list.
could you plz suggest me, is it possible? & how to do changes?
Thanks in Advance.
Regards,
Amol

HI Amol,
Its not possible to change the Planning plant , You can delete that task list or you can put deletion flag on it, and go for new creation
Riyaj

FM to change Confirmation number of Production order

Hello Experts,
I have a requirement where I need to change the confirmation number ( which is already created for a production order) AFVC-RUECK. I could see that the confirmation number is not modifiable once it is created and no opition to change it by BDC. But my requirement is to change it for a production order.
1. Is there any FM or BAPI to change it?
2. Or directly changing in the database table AFVC is the only option?
3. Or is there any other method in which we can do it.
Awaiting your reply,
Balaji

Hi Balaji,
Please check whether the below link is helpful,
Re: How to modify a wrong confirmation of a production order
Also for the relevant tables, check the link,
confirmation number of production order
Best Regards.

I have change some fields in (Production order component )

I have change some fields in (Production order component overview)

Hi,
do you want to hide or disable the fields or add new fields ??? by the way can you please let us know the transaction that you are referring to ??
Regards,
Santosh

Scheduling Parametrs for the Plant and Production Order Type

hi SAP Gurus,
Pls it is very urget
Pls let me know how to maitain the Scheduling parameters for the combination of Plant and Production Order type.
Pls provide me the Path also.....
Points will be rewarded .....
Ranjit Kumar

hi Murthy,
thanks for the solution... Problem resolved.
Assigned points...
Ranjit

To restrict Issue for production than planned qty in production order

Hi Experts,
In my scenario, the production staff will prepare production order and right click in production order document and select "Issue Components" option to Issue raw materials for production floor. After issuing the raw materials to production floor closes the "Issue for Production" document and now we have "Production Order" document open in screen. When he again select "Issue Components" option and issues the raw materials once again. Materials are issued once again wrongly. This happens since the production order document is not getting refresh after "Issue for Production" document is done.
Is there any way to restrict issue of raw materials than the planned qty.?
I have tried lot of ways to restrict this through SP. Please revert me an solution to this issue.
The procedure should trigger immediately when the "Issue Components" option is selected second time (If the raw materials are issued in full in first time itself). And it should allow only the qty which is to issued to production order qty (if they issue part issue to production order)
Thanks in advance
Raja.S

Hi Neetu,
Thanks for your quick response. I have tried this query. But it is not blocking the issue for production document even the raw materials are issued already for the production order.
I'll explain my work flow again. The Production staff will prepare production order and then release the same and update the production order after changing the status for "Release". Then he will right click the Mouse button and select "Issue Components" option and perform the Issue for Production process. He will issue the required raw material completely in one shot and add the Issue for Production document.
After adding the Issue for Production document he will close that document and now we will be in Production order document. Now our production order document will not get refreshed. Now the Production staff go for "Issue components" option, then it should not allow him to issue the components once again. But it is allowing him to issue components any number of times. there is no control.
If we browse the production order document to previous record and browse back to the same record then my Production order document get refreshed and now we can control the issue. But what should i do to control in the earlier case. Since they want to perfrom lot of production order, there is a chance to issue components for same production order more than one time before the production order document get refreshed.
Please provide me the SP to control this scenario.
Thanks in advance.
Raja.S

How to change operation dates in Production Order /Capacity Leveling

Dear Experts ,
We are using ECC 5.0 .In production order , scheduling happing as Backward based on the Sales Order Delivery Date .I am doing the following :
1.Demand as Sales Order with Delievery date : 20.03.2010
2.Running MRP with Lead Time Scheduling -2 in md02 and converting the Planned Order to Production Order .
4.Production Order have following dates :
         Basic Finsish Date : 21.03.2010
         Basic Start : the day Pl.Or--Pr.Ord
         Schedule Start : 15.03.2010
         Schedule Finsish : 17.03.2010
        Schedule Release : 13.03.2010
5.In schedueling margin key : Float Before Production : 3    , FAP : 3 , Release Period : 2
6.In material master : Work Scheduling View : Setup : 3 days , Processing : 4 ,Interoperation : 2 for one Base Qty 1
7.In operation : Op1 : Start Date : 15.03.2010    Finish Date: 15.03.2010
                         Op2 : Start Date : 16.03.2010      Finish Date : 17.03.2010
                         Op2 : Start Date : 17.03.2010      FD : 17.03.2010
Question :
1.How to change the Operation dates in Production Order Operation over view screen ? Today, operation over view screen , Start date and Finsih Date of individual operation are not changable with in Production Basic Start /BF date or beyond .It is only changing based on the Standard Value : Labor
2.How to change/re-schedule operation dates d in CM21 (Graphical view -Work Center Capacity load as per   Production Order and Operation combination ) based on capacity availale in advance dates? I am using Time Profile : SAPSFCZ002 -SFC Graph midterm-3 motnhs and Planning ,
How to solve this above issue in scheduling operation and capacity distribution .
Regards
JH

Closing the thread

Planned Ord. to Production Order User Exit (PPCO0005)

Hi Guys,
I am trying to change the Storage location field on the GOODS RECEIPT tab in transaction CO40. I get there using MD04 and change a planned order to a production order.
The user-exit that sap recommends (PPCO0005) works fine to change the storage location for the components of the production order. It does NOT change the actual storage location of the production order.
The storage location of the actual production order is found under the GOODS RECEIPT tab of the production order. Any thoughts on what could be done to change the actual storage location of the production order. Is there any other user-exit that comes to mind?
Also, I changed the storage location in the PLAF table for the planned order in user-exit PPCO0005. This works when the production order is displayed again. It does not display the changed location the FIRST time the order comes up. Any ideas on how to make the screen field change it value. The screen field is AFPOD-LGORT.
Regards,
Salil

Hi Julius,
I used an implicit enhancement in include LCOSDF36 under the form TRANSFER_DATA_PLANNED_ORDER. The enhancement builder allows you to change standard SAP code without creating a project via CMOD.
If you are on ECC versions of SAP you could use it. Go to include LCOSDF36 and switch 'on' the builder via the menu path.
If you are on older versions of SAP, you will have to locate a user-exit for PP. There are several of them available. You could also search right here on SDN.
Let me know if you have any other questions.
Kindly,
Salil

ATP check and Check against planning for a production order

Hi
When I create a production order for some orders it is ATP check and for some orders it is showing 2 in type avail check is check against planning in coois screen. Because of this orders are gettign released even though BOM material is out of stock.Can I know in which situations the orders will come under the second scenario. I always want the orders should be in ATP check
regards,
PradeepM.

Hi,
If you want only ATP check, then in MRP-3 view of the mtl master change the checking group to the same value as the one which you find to be following the ATP check.
However before making this change do consult your colleagues in other domains, as this will impact all places where Av. check is done.
Hope it clarifies.
Regards,
Vivek

Change of Warehouse In Production Order

Hello,
I need to change the warehouse 04 to 02 but i can't change the warehouse in the production order because already issue for production is made.
Is there any possibilities to change the warehouse....
Regards,
Pushpa Damodaran.

greetings pushpa,
well there are a few way, which u can try.
1. u have issued components but have u reported completion? if not, u can go to the production order, in the header u can select the warehouse to which it needs to go. first copy the output product, and then delete the name of the product, select the component again, question will be asked, do u want to update rows?, click yes, then change ware house.
2. if report completion is done, then close production order and do goods receipt.
3. change released to planned and change warehouse.
thanks and regards.

Change planning plant in production order

Similar Messages

Maybe you are looking for