Change Pocessor, what's compatible. Have: HP Presario V6000 (V6103EA) intel celeron 420 @1,60GHz
HP Presario V6000 Notebook (V6103EA)
Win XP 32
Need to upgrade:
Now: Intel Celeron M 420 @1,60GHz
Want: 2.5GHz or Higher
Compatible Processor, Sockets?
Now: Fujitsu MHV2080BH PL 64,1Gb
Want: 250 Gb or Higher
Compatible harddriver?
Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c01035886.pdf
Supported processors are listed in chapter 1, page 1 - 2.
Supported hard drives go to 200 GB that HP offered.
So, I see no reason why you can't install a 250 - 320 GB hard drive in your notebook.
SATA I or II, but it will only run at the SATA I transfer speed.
5,400 RPM for longer battery time between charges or 7,200 RPM for better performance.
Paul
Similar Messages
-
Presario-CQ56 Intel Celeron Dual-Core T3500
Hi,
I am wondering if I am able to upgrade my Processor to a Intel® Core™2 Duo processor T9550.
I currently have a Intel Celeron Dual-Core T3500, Both processes run on the Penryn PGA478 Socket. So I would assume there wouldn't be an issue?
Any answers regarding this would be much appreciated.
Cheers.
This question was solved.
View Solution.The information you just provided is enough.
I wish that I had better news to give you.
Unfortunately there is no BIOS support for the T9500 Core 2 duo CPU. The actual issue is the Intel GL-40 chipset on the systemboard. It does not support the mobile Core2 duo CPUs
The following image shows the only two CPUs that are guaranteed compatible. Neither one has the grunt of a Core2duo CPU.
reference source: Maintenence & Service Guide for the Compaq Presario CQ56 Notebook PC and HP G56 Notebook PC
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer -
i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?
Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change
-
I have a 120gb Classic that has been working, connecting and syncing flawlessly for years. Now it appears that (maybe since an itunes update) my same Windows 7 x64 computer that has not changed other than the occasional iTunes update will not detect my iPod, and therefore will not sync any more.
The odd thing is that iTunes will sometimes see the iPod (not always), and Windows will also sometime see the iPod. Even when it does, and I click to sync a podcast (or anything else) it appears to go through the #1 and #2 steps and says it is syncing - Do not unplug, then appears to finish, but when you check the ipod after ejecting, nothing has changed. It looks like this has been happening for about a week, but my wife must not have realized that songs and other items were not actually syncing.
I have tried uninstalling iTunes, downloading the 11.2... version available online now, no help. I have tried resetting the ipod, no help. I have tried changing cables, no help. every time I go through the diagnostics in iTunes, it fails the connectivity test and says "No iPod, IPhone, or iPad found.
I am so frustrated. I have tried everything I can think of but even though iTunes shows the iPod, it wont sync....This issue has been resolved - my Support Advisor, Edgar, was able to discern what was causing the problem.
It appears that, despite years of never experiencing this, one of the latest ipod updates actually altered my device's personal settings and changed it to "Manual" for all synchronizing; even performcing Factory Restores did not change it back to being automatic.
My ipod is working as good as ever now thanks to Edgar. If anyone else is having this problem, please make sure you check your device's settings in iTunes and see if "Manual" is checked - even if you never changed the settings yourself and have no reason to suspect that to be the problem, as was the case here. If it is checked - uncheck it to enable automatic syncing.
So relieved this was not a much more serious problem. I've missed having my music on the go. Thanks, Edgar! -
What do I have to do in creating a Keynote presentation on my MAC so that when I send it to my iPad, I don't have to re-do the presentation all over again as the fonts have changed, sizing has changed and everything is basically a mess?
I have downloaded many of my previous Keynote presentation into my new ipad mini and not ONE has opened properly
Rather defeats the purpose of icloud, synching, Keynote on IOS etc doesn't it?
Any tips anyone?
Cheers
PhilipThanks for this Gary. Much appreciated. Will help with future ones.
Still a bit like using keynote in 'safe mode' and very limiting.
If anyone produces an 'auto convert' app that will save me the work of fixing existing presentations slide by slide, I'm buying it :-)
Thanks again -
My imac screen display is unfocussed, odd coloured and blurred (caused by rogue cate walking over keyboard). I have no idea what settings have changed or what to check. Any ideas?!
It could be a number of keyboard shortcuts, here's a few.
If the screen is zoomed, hold CNTL and scroll down with mouse or trackpad.
If screen looks like a negative, hold down CNTL OPT CMD and click 8.
Let us know how what other symptoms are shown.
Regards,
Captfred -
How can I tell what SW I have on my MAC is OS 10.8 compatible
How can I tell what SW I have on my MAC (OS 10.7) is compatible with OS 10.8?
See App Compatibility Table - RoaringApps - App compatibility and feature support for OS X & iOS.
-
Sync message, "You have changed the settings for your iphone. Would you like to apply these changes?" What does this mean? I don't recall changing anything...
The main settings that are changed in these cases can be found in this article:
http://support.apple.com/kb/ht1386
To ensure you don't lose any data you don't want taken off, ensure that each Summary, Apps, Music, Movies, TV Shows, Podcasts, iTunes U, Books, & Photos have the settings you would prefer on the computer.
If anything gets changed on any of those pages, you will be prompted with that message. If they look fine, especially after adding some media like songs or videos, then you can apply the changes without fear. -
I have Photoshop Elements 11 (full version with Serial Number) for windows; now I don't have a windows PC anymore. Can change my windows serial number into a MAC/OS serial number? What do I have to do to get Elements 11(download) for OS an a serial number for Elements 11 ?
You can download PSE 11 via the following linked web page:
PSE 10, 11 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html -
I just upgraded to Mavericks and now my Intel iMac is running more slowly. There have been no other changes. What's up with this???
This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem.
If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Below are instructions to run a UNIX shell script, a type of program. All it does is to gather information about the state of your computer. That information goes nowhere unless you choose to share it on this page. However, you should be cautious about running a program at the instance of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them.
Here's a summary of what you need to do: Copy a line of text from this web page into the window of another application. Wait about a minute. Then paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in your browser, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
clear; Fb='%s\n\t(%s)\n'; Fm='\n%s:\n\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; R () { o=; [[ r -eq 0 ]]; }; Pm () { [[ "$o" ]] && o=`sed 's/^ */ /' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pc () { o=`egrep -v '^[[:blank:]]*($|#)' "$2"`; Pm "$1"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o="${o##+( )}"; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; id | grep -qw '80(admin)'; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=`system_profiler SPHardwareDataType | awk '/Mem/{print $2}'`; o=$((o<4?o:0)); Ps "Memory (GB)"; o=`system_profiler SPDiagnosticsDataType | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; o=`pmset -g therm | sed 's/^.*CP/CP/'`; egrep -q 'No th|pms' <<< "$o" && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; grep -q '= [^GO]' <<< "$o" || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; d=(/ ""); D=(System User); for i in 0 1; do o=`cd ${d[$i]}L*/L*/Dia* && ls | grep -v 'ag$' | tail | awk -F_ '{$NF=a[split($NF,a,".")]; print}'`; Pm "${D[$i]} diagnostics"; done; o=`syslog -F bsd -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|n Cause: -|NVDA\(|pagin|SATA W|ssert|timed? ?o' | tail -n25 | awk '/:/{$4=""; $5=""; print}'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); o=${s[2]}%; Ps "CPU usage by process \"$s\" with UID ${s[1]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); s[2]=${s[2]%[+-]}; o=$((s[2]>=25000?s[2]:0)); Ps "Mach ports used by process \"$s\" with UID ${s[1]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'`; Pm "Extrinsic system jobs"; o=`launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`find -L {/,}L*/Lau* -type f -exec sh -c 'file -b "$1" | grep -qw XML' {} {} \; -print | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`find -L /{S*/,}L*/Star* -type f -exec sh -c 'file -b "$1" | egrep -q "XML|bin|exec"' {} {} \; -print`; Pm "StartupItems"; o=`find -L /S*/L*/E* {/,}L*/{A*d,Compon,Ex,In,Keyb,Mail,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB\ :CFBundleIdentifier "$d/Info.plist") || ID="No bundle ID"; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|\.hpio|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find -L /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print`; Pm "Unsigned shared libraries"; o=`launchctl getenv DYLD_INSERT_LIBRARIES`; Pm "Inserted libraries"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; Ps "DNS"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; Pc "hosts" <(grep -v 'host *$' /etc/hosts); Pc "User launchd" ~/.launchd; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=`find ~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \) | wc -l`; Ps "Restricted user files"; cd; o=`system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist ! -exec sh -c 'plutil -s "$1" >&-' {} {} \; -print`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} files"; done; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important.
If you're not logged in as an administrator, you won't be prompted for your password. The test will still run. It just won't do anything that requires administrator rights.
The test may take up to a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. There wiil be nothing in the Terminal window and no indication of progress until it's done. Wait for the line "[Process completed]" to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report your results. No harm will be done.
When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
When you post the results, you might see the message, "You have included content in your post that is not permitted." That's because the forum software falsely identifies something in the post as a violation of the terms of use. If that happens, please post the results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of Apple Support Communities ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
My question is what if I have troubleshooted with holding the sleep/awake button and power and it's not changing to any other screen what should I do? It doesn't even show the battery strength wheither its completely dead or charging at all.
- If you did not charge the iPod for a couple of hours before you did the reset then charege and reset:
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Then connect to your computer and if iTunes sees the iPod restore via iTunes.
- Next see if recovery mode will allow iTunes to see the iPod so you can restore the iPod. For recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last, make an appointment at the Genius Bar of an Apple store. -
I forgot my answer to my security questions and i dont have the option to change them. what do i do?
so i went to download something on my computer to be put on my ipod but i forgot my security question answers. i went to try to change them but i dont have that option so what do i do?
You need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(113195) -
i changed my ipad password and have forgotten what I changed it to. How do I unlock ? I have access to a computer and cable to connect computer to ipad.
Forgotten passcode
http://support.apple.com/kb/HT1212 -
I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y
I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can you please help?
Thanx, I downloaded the whole CS on my computer now again. It was completely gone so it seemed. It’s working! Thank you.
Van: Ned Murphy [email protected]
Verzonden: dinsdag 15 april 2014 14:08
Aan: FEE
Onderwerp: I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y
Re: I changed from windows xp to windows 8.1 now CS5 is not working. Error6. what do I have to do. Can y
created by Ned Murphy <http://forums.adobe.com/people/Ned+Murphy> in Downloading, Installing, Setting Up - View the full discussion <http://forums.adobe.com/message/6299648#6299648 -
I recently had to have a migration done on my Mac Desktop. Since then I keep getting this message on my MacBook regarding my calendar: "The server responded with an error." Its been asking me to check my ID and password, which I did not change. What do I do to correct the problem?
That's probably the MobileMe or iCloud password.
Go to System Preferences > Mobile Me (or iCloud). If you're not logged-in, do so. If you are, log out and back in again.
Maybe you are looking for
-
Hi All, Previously i assumed the logical system as PABC, so i provided this in the SLD and click on the Adapter Specific Identifier to synchronize the logical system name , but now the logical system name is changed to some only ABC and the same is
-
Cant install NeoOffice - help!....
....I get as far as 'select a destination' and see the hd with an exclamation mark saying 'can't be installed on this volume until it is put into applications folder blah blah blah, which I've done but still no luck, help please - thanks.
-
PAR causing vertical letterboxing (black bars)
I recorded in HDV PAL, now I am trying to export to SD PAL (720x576)... I have exported using the Media Encoder and I get black bars on the sides (e.g. vertical letterboxing). I did a bit of research and I see that this is due to the corrected Pixel
-
Write photo's back to SD card?
Is it poosible to get the program to write photo's back onto your SD card?
-
Systemd starts hibernating but stops after a few seconds
Hi, I tried to make my computer hibernate (by following the wiki instructions), so I added my swap partition path into the grub file and the resume hook into mkinitcpio.conf. Then, I tried to hibernate, the hibernation process starts and my screen tu