Change pointer for HR master data is not getting generated in table BDCP

Hi,
I have done all the required configuration for change pointer for HR master Distribution and it was working fine few days back. Now suddnly it has stopped working.
Can anyone assist me on how should i debug it.
Thanks
Sunil Singh

Hi Shital,
Thanks for your Reply.
I am not able to find that path in SPRO
Basic Functions-> application Area
And Also My change pointer configuration was working properly and it suddenly stopped working.
I mean to say all the required settings was done previously.
Anyways kindly let me know how should i proceed.
Thanks
Sunil Singh

Similar Messages

Change pointers for HR master data

Hi I am trying to setup change pointers for HR Master data , in relation to HRMD_A06 idoc , I did all the steps for setting up change pointers.
Transaction bd52 for my reduced IDOC shows 0 entries, When i did the same for customer master data , BD52 had some entries by itself .
I can't produce any HRMD_A06 Idocs , What am i doing wrong? Should the entries in BD52 be added manually for all the fields i need?
Any help is much appriciated.
Sudheer

Hi,
guess it's not necessary to see some entries in bd52 (it's enough to activate in bd53).
Do you have configured RBDMIDOC (otherwise no IDocs will get generated).
Or you run t-code bd21 for testing. Standard way is to run the report RBDMIDOC in a periodic background job.
A good description could be found here (p. 12):
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30139fb0-360c-2a10-1e9f-9d5417754983
Regards
Patrick
Edited by: Patrick Koehnen on Aug 12, 2008 3:40 PM

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Data is not getting updated in table using RFC

Hi Experts,
In my scenario, I am calling one RFC using RFC receiver channel. After running scenario, channel is showing status that RFC executed successfully. But when I am checking tables in R/3 system, data is not getting updated.
Moreover , when we tried to execute the RFC manually in R/3 system, that time data uploaded into table successfully.
Could anybody tell me what would the reason that data not uploading into table when we send it through XI.
Regards,
Sari

HI Sari,
as you have scenario with RFC receiver.. and as you mentioned that it not updating tables when run through PI but when you execute RFC manually tables got updates.. then following are the options you can check..
-- if you check RFC communication channel and if everything ok on then.. this means that your RFC is getting triggered successfully..but as you said tables are not updated.. for this you can go to SXMB_MONI and check the log take payload after mapping.. and compare it with the input when you try to execute it manually.. I think the input when you try manually and input to RFC when you try through PI is different and that is causing the Problem.. you will be able to see the difference in input then check.. I think the problem is data and not RFC communication channel..so by using this you will come to know difference
-- else if possible configure your ID in PI in RFC Receiver and then check and put breakpoint on ABAP side.. so that when PI will hit RFC you will get it in debug mode and able to see what is going wrong..
Thanks,
Bhupesh

Maintain Change Pointer for Customer Master?(change in Master data)

Hello everyone,
i want to capture change in master data .whenever a change happen to required field in customer master an idoc should be create for that and the entry should e made in table CDHDR and CDPOS.
Please tell me the entire process how can i achieve this .

Hi,
Tables / Functions:
The change pointers are stored in tables BDCP and BDCPS.
With release ECC 6.0 SAP delivered a new table BDCP2 for increased performance. Which table shall be used is defined in transaction BD50 (see below). There is a function to migrate “old” change pointers to the new table.
The function group BD01 contains function modules for reading and updating the new change pointers in table BDCP2.
BDCP
Change pointer
BDCP2
Aggregated Change Pointers (BDCP, BDCPS)
BDCPS
Change pointer: Status
Prerequisites:
There has to exist a Change Document Object (CDO) for the SAP-object we change. For standard objects like material masters, vendors or customers these objects already exist. For own business objects we have to define a change document object with transaction SCDO .
In the corresponding data element for the database field the flag „Change document“ has to be active. check the details in the transaction
The usage of change pointers has to be actived generally for the system
Transaction BD61

Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Change Logs for customer master data in 3.1 H version

Hello All
Are they any existing reports or change logs for viewing changes to customer master data in 3.1h version. I want to be able to report based on changes made to customer master.
I know there is a good report in 6.0 version for this- S_ALR_87012182.
If I have to develop a custom program for this in 3.1h. Which table I should use? KNA1 or CDPOS.
Any ideas will be appreciated.
Hema.

Hi,
Please check the filter settings maintained for the adapter object CUSTOMER in R3AC1. The same filter settings can be referred in tables Table: CRMFILTAB (R/3) and SMOFFILTAB(CRM) as per srinivas's reply.
Check the sales area of the customer maintained (Sales Area, Division, Distribution Channel etc.) and see if the current filter settings are restricting the customer from getting replicated in CRM. If everything is maintained fine then check for any failure Bdocs in SMW01 or SMW02.
Regards,
K

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Master data is not getting displayed in the Query Designer

Hi,
I have a DSO in which I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No. master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

Hi,
I have brought the Emp. No. in the Key Field and also have activate the master data again.
Yet my Query Designer doesn't have the Emp. No.
I have done a full load for both Master and Transaction.
Please advice me what the other alternative.
Thanks

Master Data is not Getting Updated Properly.

Dear Expert,
I am trying to pull the data by Info package but The text is not getting updated.
The Master data object is 0BPARTNER . To update this Master data , we ghave 2 info packages
0BPARTNER_ATTR and 0BPARTNER_TEXT. But the text is not getting updated ( like the fiels E-mail address, Address 1, Address 2, Address 3, Address 4,.... Phone No,Etc.
What could be the Reason for this and How can I solve this issue ?
Tahnks,
Utpal

Hi,
Could you please check the data in RSA3.
If everything is there in R/3 side.Then,please check are you giving any
condition in the infopackage .
Please run the infopackage without giving any condition.
Thanks,
Saveen Kumar

Master data is not getting enabled in the InfoSet.

Hi Experts,
I have 3 DSOs in an InfoSet and I have also brought 2 Master data infoobjects in this infoset.
The master data check box in the infoset is not enabled and also not getting displayed in the Query Designer.
Can anyone please let me know how do I bring the master data in the query???
Also please advice me whether I should have only 3 DSOs in the infoset.
Please help.
Thanks

Hi,
In my DSO I have an InfoObject called Emp No. in the Data Field.
The Emp.No is being maintained as master with (Emp Name, Address, Telephone No, DOB) as attributes.
I have loaded the data in the Emp. No master. Then tried loading the transaction data in DSO.
The Emp.No is there in the DSO active data, but in the query designer its not getting displayed.
Hope its clear.
Please help.
Thanks

EXIT_SAPLV01Z_013 for Batch master Update is not getting called for MSC1n

Hello,
I am facing the same issue I want to update a date 6 field while the user create a Batch thurogh MSC1n.
I am using the EXIT_SAPLV01Z_013 to update the same.
But This Exit is not called as there is a condition which fails while this exit is called thru FM VB_CREATE_BATCH.
the field NO_CFC_CALLS is set to "X" in Include LCHRGF02.
CALL FUNCTION 'VB_CREATE_BATCH'
EXPORTING
ymcha = akt_mchx
new_lgort = dfbatch-lgort
bypass_lock = 'X'
kzcla = ' '
xkcfc = ' '
no_check_of_qm_char = 'X'
no_change_document = ' '
check_external = space
check_customer = space
no_cfc_calls = 'X'.
Can you please help how do we resolve this issue i am using SAP 4.7.
Thanks
Solanki Ritesh

hello
Any suggestion do we have any OSS note for the same???
thanks
Solanki Ritesh

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

Change Pointers for Vendor Master

Hi All,
I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
1. An Idoc will be generated for newly created vendor, right?
2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
Thanks & Best Regards,
Kumar.

>
Sivapuram Phani Kumar wrote:
> Hi All,
>
> I have to activate change pointers for Vendor Master data. I have some doubts regarding the same.
>
> 1. An Idoc will be generated for newly created vendor, right?
> 2. If I extend the vendor master IDOC, where should I write code to extract the values of newly added fields?
> 3. If I create a custom IDOC for vendor master, what is the procedure to configure this in the change pointers for Vendor Master?
>
> Thanks & Best Regards,
> Kumar.
Hi,
1. Afer doing all the settings required to create change pointers (BD61, BD50, BD52), the idocs will be created when u run the report RBDMIDOC or execute transaction BD21.if any changes happen in master data
like new vendor is created or vendor data is changed, then only change pointers will be created and on executing the aforesaid report, idocs will be generated.
Also idocs can be generated by replicating vendor data through transaction BD14 or any other custom transaction.
2. When you add custom segments to basic type, you have to write code in suitable user exits.
Identify suitable user exit to populate data in custom segments and write the code in oubound side.
Identify suitable user exit to populate the values in custom segments to database table, this code is to be written in inbound side.
Regards
Vinod

BADI for MIGO update - Data not getting saved in table sometimes

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
Instead Of Updating The Gate Entry Item Table Now
Update The Gate Entry Header Table. Update The
Value Of The Field MBLNR With Current Document Number
Generated Updating the header table ZMM_GATE_ENTRY
    SELECT SINGLE *
      FROM ZMM_GATE_ENTRY
      INTO WA_ZMM_GATE_ENTRY
     WHERE GATEENTRYNO EQ GS_EXDATA_HEADER-GATEENTRYNO
       AND WERKS       EQ GS_EXDATA_HEADER-WERKS
       AND GYEAR       EQ GS_EXDATA_HEADER-ENTRY_DATE+0(4).
Check To Ensure That Once A Gate Entry Number
Is Associated With A GR It Cannot Be Reused
    IF WA_ZMM_GATE_ENTRY-GR_NUMBER IS INITIAL.
      WA_ZMM_GATE_ENTRY-REFERENCE = GS_EXDATA_HEADER-REFERENCE.
      WA_ZMM_GATE_ENTRY-REFWERKS = GS_EXDATA_HEADER-WERKS.
      WA_ZMM_GATE_ENTRY-GR_NUMBER = IS_MKPF-MBLNR.
      WA_ZMM_GATE_ENTRY-GR_YEAR   = IS_MKPF-MJAHR.
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt updates data sometimes and does not updates the data sometimes
    ELSE.
      MESSAGE E901(ZMM) WITH GS_EXDATA_HEADER-GATEENTRYNO WA_ZMM_GATE_ENTRY-GR_NUMBER.
    ENDIF.
Plz suggest some soln?
Regards,
P.S.Chitra

Hi,
This is regarding automatic update of material document number to our Z Table for Gate entry in MM.
Steps for Generating GR throu2019 MIGO:-
1) the user has to key in the gate entry number and plant,
2) then after giving i/p values the user has to click the save button,
3) MIGO number is generated by the system which is updated in gate entry header table.
For updating the MIGO number BADI is used . But some time the system is not updating the GR number in gate entry header table.
Can we use COMMIT WORK statement in BADI? Hope its not advisable to use it.
What else can we do if data is not getting stored in table while updating throu2019 BADI?
Inside the Method : IF_EX_MB_MIGO_BADI~POST_DOCUMENT the below code is written,
MODIFY ZMM_GATE_ENTRY FROM WA_ZMM_GATE_ENTRY .u201Dupdating the workarea
u201CThe above modify stmt in code updates data sometimes and does not updates the data sometimes
Moderator message: duplicate post locked.
Edited by: Thomas Zloch on Aug 10, 2010 11:33 AM

Change pointer for HR master data is not getting generated in table BDCP

Similar Messages

Maybe you are looking for