Change Pointer Program for IDOC creation..??

To All
Where does the message type is assigned, which allow that type of IDOC getting created in WPMU...??
Can COND_A be created in Change pointer Program...??
If possible ..How...??
Thanks
Sumeet

3)
RBDMOIND to confirm whether idocs have been successfully
dispatched to the receiver..and v can also use this program to change the status of idoc from 3 to 12....
RSNATED is the program used for triggering IDOC for the output type..where the output medium is 6.
And the subroutine that triggers the IDOC in the program is EDI_PROCESSING.
RSNASTED itself determines the associated IDoc outbound function module, executes it to fill the EDIDx tables and passes the prepared IDoc to the port.
You can call the standard processing routines from any ABAP, by executing the following call to the routine. You only have to make sure that the structure NAST is declared with the tables statement in the calling routine and that you fill the at least the key part and the routing information before.
TABLES NAST.
NAST-MANDT = SY-MANDT.
NAST-KSCHL = 'ZEDIK'.
NAST-KAPPL = 'V1'.
NAST-OBJKY = '0012345678'.
NAST-PARNR = 'D012345678'.
PERFORM einzelnachricht_screen(RSNAST00).
Calling einzelnachricht_screen determines how the message is processed. If you want to force the IDoc-processing you can call it directly:
TNAPR-PROGN = ''.
TNAPR-ROUTN = 'ENTRY'.
PERFORM edi_processing(RSNASTED).
~~Guduri

Similar Messages

Change pointer technique for idocs

I have to generate idoc whenever some fields of the sales order changes (Transaction VA02)
I thought of doing this using change documents. There is a standard change document object VERKBELEG   for sales order.
In transaction BD52 for the message type ORDRSP I have mentioned the fields names as below (my idea is to generate the idoc when these fields of the sales order changes).
VERKBELEG          VBAP          ABGRU
VERKBELEG          VBAP          KWMENG
VERKBELEG          VBAP          KZWI1
VERKBELEG          VBAP          KZWI2
VERKBELEG          VBAP          MATNR
VERKBELEG          VBAP          PRCTR
VERKBELEG          VBEP          WMENG
VERKBELEG          VBKD          KDKG3
VERKBELEG          VBPA          PARNR
It seems that the report RBDMIDOC will not support for transaction data.
When I tried to execute the report RBDMIDOC by giving message type    ORDRSP in the selection-screen it gave the following error
Message type ORDRSP cannot be sent with change pointers
Message no. B1157
Diagnosis
You attempted to send message tyoe ORDRSP. Unfortunately you cannot choose data for this message type using change pointers.
System Response
The system does not carry out the action.
Procedure
If message type ORDRSP is for master data, it can be sent directly. If it is for transaction data, the message tyoe is sent automatically via the transaction.
is there a way to generate idoc via the transaction VA02 (sales order change) instead of executing the report
RBDMIDOC

Hi Srinivas,
This can be done but some development would be required.
If you know about requirement routines ( transaction VOFM ) you can create your own requiremnet routine for application V1. For reference see routine 002 for V1 .
( program LV61B002 ). You can create your own req routine say 901 for V1 and then assign it in output procedure in NACE for BA00. Output will be generated only when you pass a SY-SUBRC = 0 from the custom routine that you will create .
But another problem would be how to determine whether the field values you have mentioned has changed or not.
You can use user exit MV5AFZZ , subroutine SAVE_DOCUMENT_PREPARE , to analyze your fields .
Here you have XVBAP[] table with ( user ) changed values in current transaction , YVBAP[] with current database state at runtime. ( same is true for XVBKD & YVBKD ) . You can analyze the values and then set a flag here to say that "Generate Output" or "Supress Output" . This single caharacter flag "X" or space you can pass to ABAP memory , which you can read ( import ) in requirement routine ( VOFM ) and then set SY-SUBRC = 4 or 0 depending on this flag value.
Above solution will not mean any modification to SAP .
Otherwise you can also look at OSS note 395569 wherein its a modification but you can achieve desired results.
( You can use the code given here as refernce and put this same code with the solution I have proposed above with some additional checks. )
If answers were helpful reward and close.
Cheers.

Reg : change pointer mechanism for triggering the IDOC for delivery note

Hi ,
I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
Thanks !
Regards,
Kiran

Hi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh.

Output type for movement type for IDOC creation

Dear Experts,
Can anybody tell how to create "Output type for different movement types for IDOC creation"
Specially for Movement type used for Inbound & outbound.

Hi,
pls find below link's
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/abap/idoc%2bsteps
BAPI & IDOC material
IDOC Scenario Steps
http://help.sap.com/saphelp_erp2005/helpdata/en/0b/2a60bb507d11d18ee90000e8366fc2/frameset.htm
http://sap.niraj.tripod.com/id51.html
http://www.thespot4sap.com/Articles/SAP_ALE_IDOCS.asp
Changing fields in an Idoc segment
Regards
Raj.

Output type for IDOC creation

Hi Sapgurus,
Can anybody help as per below.
Client has third party interface system from which they access stock data from SAP system to front end system.They required stock quantity.As per below transaction I have to create output type for IDOC creation for below t codes.Pls guide for creating output type.
Note: Consider as per MM point of view.Output type is not for printout,It is for IDOC to display stock at front end system.
MB1C u2013 Inward + Outward (As per movement types)
MB1B u2013 Inward + Outward (As per movement types)
VL02N - Inward + Outward (As per Delivery types (Inbound & Outbound))
VL06G - Outward
VL09 - Inward + Outward (As per Delivery types (Inbound & Outbound)
MB0A u2013 Inward
MB01 u2013 Inward
MBST u2013 Reversal of Inward stock

Hi,,
Check the below idoc WMIVID01
"IDoc for Inventory"" in help.sap.com
regards,
Lalita

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...

Latest Lithroom 5.6 does not recognize my .cr2 raw file format and Windows 7 it asociates with my older raw plug in in Ps CS5.5. I am not able to change default program for .cr2 in the properties pannel...
every new released update of Lr from v 5.2 changed somethin in my Windows 7 Professional settings. I am stucked. Can somebody help me please? Many thanks. Andrej

Hi Jim,
yes after I imported my .cr2 raw files into new catalog it started to work. Windows 7 still does not recognize them but I can edit them as you said within the Lr5.6 and then export them into .psd or .dng files...as needed.
I bought Lr5 only because I got present - my new camera Cannon 70D and because my older Photoshop CS5.5 raw plugin does not recognize. cr2 files.
Many thanks for your help.
Andrej.

What is the Std Program for IDOC Blocking ?

Hi friends,
Tell me standard program for IDOC blocking.
Thanks and Regards..
naveen

Hi,
You have to write a program to do this:
tables: edidc.
data: idoc_status like EDI_DS occurs 0 with header line.
parameter: docnum like edidc-docnum.
idoc_status-logdat = sy-datum.
idoc_status-logtim = sy-uzeit.
idoc_status-status = '59'.
append idoc_status.
call function 'EDI_DOCUMENT_OPEN_FOR_PROCESS'
       exporting
            document_number = docnum.
      importing
           idoc_control    = edidc
      exceptions
           others          = 4.
CALL FUNCTION 'EDI_DOCUMENT_STATUS_SET'
EXPORTING
    DOCUMENT_NUMBER               = docnum
    IDOC_STATUS                   = IDOC_STATUS.
IMPORTING
IDOC_CONTROL                  =
EXCEPTIONS
DOCUMENT_NUMBER_INVALID       = 1
OTHER_FIELDS_INVALID          = 2
STATUS_INVALID                = 3
OTHERS                        = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'EDI_DOCUMENT_CLOSE_PROCESS'
EXPORTING
    DOCUMENT_NUMBER           = docnum
BACKGROUND                = NO_BACKGROUND
NO_DEQUEUE                = ' '
IMPORTING
IDOC_CONTROL              =
EXCEPTIONS
DOCUMENT_NOT_OPEN         = 1
FAILURE_IN_DB_WRITE       = 2
PARAMETER_ERROR           = 3
STATUS_SET_MISSING        = 4
OTHERS                    = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
regards
Aveek

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

Can you get a power point program for the mac, my daughter has a power point assignment and i am not sure how to do it on the mac

You can use a free alternative like openoffice for this:
http://www.openoffice.org/porting/mac/
or libre office which is a fork of open office:
http://www.libreoffice.org/

Customization for Change Pointer Mechanism in IDOC Programming?

Hi,
Can anyone suggest me that
We want to Maintain Master and Transactional Data in Different SAP Servers.I want to Send the Master Data to the other Server but before IDOC Creation i need to Display all Created or Changed Master Data then Our endusers will select Specific Master Data then only IDOC will create for that Master Data and Created IDOCs will send to the other SAP Server where Transactional Data is Maintained.
In Change Poinetr Mechanism it is not possible to see the Created or Changed Master Data before IDOC is going to be Created.But i need to Display the Master Data.
Please give me an idea to solve this or if you have any solution then send me.

Hi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh.

Change pointer method in IDOC.

hi,
Plz tell me necessary steps for data transfer using change pointer method . after
Activate change pointers ,De-activate change pointers. run of program RBDMIDOC ,RBDCPCLR , what other programs we need to execute related to this change pointer method . I thin I m missing 2 more steps for this method..
Thanks.

Hello sranjna ,
These are the steps for change pointer :
1. BD61 :Activate change pointer generally .
2. BD50 :Activate change pointer for message type.
3. BD21 :Create IDOC type from change pointers.
4.Save the content : create a variant .
5.For automatically process:go to SM36 :Create a job with the program "RBDMIDOC " and the variant you created.
Also see the link if you want :
[http://help.sap.com/saphelp_nw04/helpdata/EN/12/83e03c19758e71e10000000a114084/frameset.htm]
Good Luck,
Boaz

Disable Change Pointer to send Idocs to a specific destination

Hello All,
We are sending several Master data idocs to a couple of SAP systems. For one destination, we need to enable change pointers for those messages and send updates of any changes/ new data created.
However for the other destination, the ALE transfer is one time and is going to be scheduled on 'as needed' basis only. Since the change pointers are enabled, Idocs are going to be sent to both destinations and we dont want that.
Pls note that there are BADI like Idoc_Creation_check where we can disable Idoc creation based on destination, but that would mean that when the one time load is scheduled, no idocs will be sent. So we dont want to go that route. We can take off the partner profile config/ ALE model and configure it as required, but that would not be a good approach as well.
Please adivse if there is a method where we can disable Idocs (that are created due to change pointers alone !!) to a specific receiver.
Thanks for your help in advance!
Liz

Hello Liz,
... However for the other destination, the ALE transfer is one time and is going to be scheduled on 'as needed' basis only ...
I feel you can use the "Collect IDocs" output mode for this particular partner profile. (can be configured via WE20)
"As needed" you can process the collected IDocs by scheduling the program RSEOUT00.
Do you think there is a problem in this approach? If yes, please elaborate!
BR,
Suhas

ALE/Change Pointer Configuration for ZSEGMENTS

Hello all,
I have been searching for a few days now trying to obtain my requirement with extending of an idoc. I am working with the following:
Message Type: HRMD_A
BASIC Type: HRMD_A06
Extension: ZHRMDA06
I extended the idoc because I wanted to include 2 extra infotypes which are not on that idoc. Infotypes 77 and 709.
Here is what I have completed so far.
WE30...Created ZSEGMENTS to include below.
WE31...Extended the HRMD_A idoc to include the ZSEGMENTS defined below.
WE82...Updated the output types and assignments to idoc.
BD61...Activate Change Pointers
BD50...Activated change pointer for HRMD_A.
I change the address field in infotype 0006.
Run the BD21...idoc is generated with the changes to address, everything looks good.
Do the same thing for the ethnic origin on infotype 77, no idoc is generated.
I turned on logging onto table PA0077.
I am evaluating the change logs via SCU3, and I am seeing my changes on the field.
What I have tried...
I have tried creating a object in t-code SCDO (ZTEST)
I have associated ZTEST with table/field PA0077-RACKY.
Tried running BD21...No iDoc generated.
I have been researching for a few days and it feels that this should be able to be done through configuration and not custom coding. Am I wrong to think that?
Has anyone ever did anything like this before which they can point to documentation or even the appropriate search criteria on the SCN forums.
Thanks in advance for your help!
Jason

Hi Jason,
I believe you have to enter the fields that trigger the changing pointer in tcode BD52. In my case these are the fields for BOM:
Regards,
Custodio

Change Pointer to create IDoc

I wrote report program to create outbound IDoc. In the report, to capture create/ change I used table 'CDHDR'. Now I require below clarifications:
1.     Clarify the process of u2018Change pointeru2019 regarding IDoc.
2.     Is it recommended to use u2018Change pointeru2019 to create Outbound IDoc?
a.     If yes, then why do we write report or function module?
b.     Can we use custom message type in this process or only standard message types will work?

Hi
Change Pointer IDOC..??
Regards
pavan

ALE Change pointer setup for master

Hello everyone,
When I am extracting data from R/3 some of the changes are not getting extracted. I want to check if all the proper Message types are turned on or not. What is the best way to do that?
I am extracting 0cust_sales.
thanks

It is activated there, I checked. Thats like a master switch which controls change pointers for all message types.
But dont I also have to turn on change pointer for each message type ?
I am refering to customizing in R/3
SAP Netweaver-> SAP Web Application Server -> IDoc Interface / Application Link Enabling (ALE)->Modelling and Implementing Business Processes->Master Data Distribution->Replication of Modified Data->Activate Change Pointers for Message Types
Thanks

What is the use of change pointer technique in IDOC

hi
could anybody suggest me
what is the use of change pointer technique and how to use it
thank you
kalyan.

Change pointers are used for changes to the master data objects are flagged for distribution by SMD Tool.i.e.shared Master Data.
You need change pointers to distribute changes with the ALE SMD tool. If you do not use this tool, you do not need to write change pointers.
You can deactivate change pointers and activate them again with the transaction BD61
The SMD tool is connected to the change document interface. If the master data changes are to be distributed, the application writes a change document. The contents of this are passed to the SMD tool. The tool writes change pointers, reads the application data and creates the master IDoc.
The master IDoc is then passed to the ALE layer, which sends it to all interested systems.
The change pointer tables (BDCP und BDCPS) should be as small as possible. Use as few change pointers as possible and delete change pointers which you no longer need.
You can increase the rate of processing by using the Analyze Change Pointer and Reorganize Change Pointer functions.

Change Pointer Program for IDOC creation..??

Similar Messages

Maybe you are looking for