Change pointer + user exit + condition records
Hiii
When creation or modifying condition record that status blank i don't want a change pointer to be generated?
Note that the KBRST field for status is not present in the BD52 transaction thus filtering cannot be done so as for change pointer to not be generated when condition record with status blank.
Please advise if this can be done on a user exit?
Thanks
Hi,
your question is not understandable.
Pls provide more details.
Cheers,
André
Similar Messages
-
User-exit for changing pricing date in condition record while creating SO?
Hi all,
I am creating sales order based on PO using ALE-idoc . Here i got one problem i.e the system taking the pricing date as system date.
But i want the pricing date equal to PO document date.
Please specify where and how to set this pricing date?
Thanks,
Vamshi.hi Vamshi,
Could you poste your solution for our information?
I ran into a situation sort of related to yours.
Our customers use ALE change their Purchase Order(PO) to us. Then, by means of ALE, our Sales Order(SO) changed accordingly.
According to system standard, our Sales Order(SO) pricing date modified to present date. But in our industry scenario, pricing date is unchangable once the Sales Order(SO) has been created.
Which user exit I can utilize to made those pricing date of SO header and body item stay the same? -
Information Broadcasting Settings (Dynamic Change or User Exit)
Hi,
We are working on BI7 and we have a need to print a cost centre specific report on different cost centre specific printers.
This relationship of user to cost center to printer is stored in a custom table(Ztable) as given below:
User Id Cost Center Printer
Abc 2000 XYZ
It is easy to setup a setting in the Information Broadcasting and use it for printing. But problem is coming from the fact that it is a static setting and a new setting is required for each record of above custom table (Ztable).
Also, if there is any change in custom table entry, which is linked with R3 source system then we need to do manual changes in the Information Broadcasting settings. There are more than 520 printer records in this Ztable.
It could be better, if there was some way to use a single information broadcasting setting and use it with different parameters but I could not find any such option.
Other possibility is to create the settings by a background job but I did not see any such possibility as well.
Is there any user exit that can be used to manipulate Information Broadcasting settings in background?
Thank you very much for your help!
Praveenhi praveen,
One of the important enhanceents in BI7 broadcasting was to "individualize the content based on master data"......
for example....If the last field in your master data record was an email address...
you can create a report, filter by the UserID (1'st field) and email it...
I didn't send it to a printer....but I am guessing it should not be much different than emailing...
Good luck, BB -
I have added a custom field zz-ref1( 60) in ekko table and also added this field on the screen. I am creating a collective PO using WF10 transaction and want to update this field with all my STOs ( smaller POs) numbers.
So for example if I create a collective PO no 10000 for the following STOs 101 102 103 , I need to populate this field zz-ref1 in PO 10000 as 101,102,103.
Also I need to update the zz-ref1 field in STO ( which are also the POs ) as follows.
Po Type Po Number zz-ref1 field
STO1 101 10000
ST02 102 10000
ST03 103 10000
PO type Po Number zz-ref1 field
Collective 10000 101,102,103
PO
Table FRET has the relationship
Collective PO STO
10000 101
10000 102
10000 103
In which user exit can this be achieved or do I have to do this in the BADI ME_PROCESS_PO_CUST. I am wondering if I will end up in a recursive loop doing this because I will be changing one PO field and will also be changing the child POs( STOs ) using the same BADI.
Please let me know if there is any alternative better way.
Regards,
Ankur BhandariHi,
Pls try enhancements MM06E005(read the documentation of this exit. Also see the function module EXIT_SAPMM06E_012) or the BADI ME_PROCESS_PO_CUST.
Thanks
Vinod
Message was edited by: Vinod C -
Version Change in User Exit , Customer Exit, Screen Exit
Hi All,
If Version change then whether the user exit, customer exit & screen exit will remain same? or what needs to be done for that?.
Regards,
AbhijitHi,
as per my knowledge there is no effect in the user exit ,in generally when version change the screens are chenges for particular transaction not the user exit .
Regards,
Madhu -
Hi all,
We have requirement to enter Unloading point using user exit at item level in Sales order .
Any suggestions welcome,
Regards,Hi,
In the include MV45AFZZ use the beloe exit and code.
FORM userexit_field_modification.
case screen-name.
check sy-dynnr = '4452'.
WHEN 'KUWEV-ABLAD'.
KUWEV-ABLAD = 'TEST'.
endcase.
ENDFORM. "USEREXIT_FIELD_MODIFICATION
Thanks. -
Change Sacle Type in Condition Record
Hi Friends,
Is there any way by which we can change the scale type while maintaining the condition records. We have maintained scale type A (Base Scale) in V/06 for a condition type. Now the business requirement is such that we need to maintain two condition records for the same condition type, first one with 'From' and the second one with 'To' scale type. Can this be done at the time of maintaining the condition records.
Regards,
Abhishek.Hi,
It is possible to change the scale type in condition record.
Do the following.
1. In V/06 for the condition type, maintain the scale type as empty (can be maintained in the c. record)
2. nowcreate c.record in vk11
3. go to scales view
4. here put the cursor in the scale type and click the lens at top right
5. now u can change the scale type in the control tab of the view
now come back to scales view and maintain the values
Hope this helps you
Pls reward if it helps. -
Tab strip push button text change for user-exit screen
Hi experts
How can I change the text of Tab strip push button which is maitained by screen user-exit.Such as I maintained the user exit MEREQ001,In the screens of TCODE me51n there have a subscreen named
"CUSTOMER DATA",Now I want change the text.
thanks in advance
BR
Chriscreate ab push button without any text. In the run time you can assign test to this as follows.
suppose name of the button is PUSHBUT.
PUSHBUT = 'EDIT'. -
Change Pointer while deleting a record
Hi everyone,
My question is: Suppose that the change pointers have been enabled for cost center message type. The sender sent a set of cost center data to recx. Now one of those cost center records in sender is deleted; will that cost center in recx also get deleted?
Thanks in advance !Hi All,
Thank you very much for your answers. I have the same understanding.
I have an issue though; in my sender a particulat cost center was deleted but it still exits in the recx. I checked first thing if the change pointers were enabled (tcodes BD61, BD50 and BD52. With respect to the cost center field in the idoc everything is enabled. So I am wondering why it dint get deleted in the recx.
all suggestions are welcome ! thanks a lot once again -
hi all
i want to delet records from t_covp (internal table) where blenr does not exit in ADO1DLI, if it exist , need to check dlinr of AD01DLI and AD01DLI, if it doesnt match, delete it from T_covp, it it matches the records will stay in >T_covp.
can any body guide me how to write code for that
I have written it but there r performance issues...
loop at itab_covp.
select dlinr belnr from ad01dli INTO itab_AD01DLI where belnr <> itab_covp-belnr .
DELETE t_covp where belnr = itab_AD01DLI-belnr.
endselect.
SELECT Xdlinr Xbelnr Y~dopen
INTO (dlinr, belnr, dopen)
FROM AD01DLI as X INNER JOIN AD01DLIEF AS Y
ON XDLINR <> Ydlinr
WHERE X~belnr = itab_covp-belnr
and Y~dopen <> ''.
delete t_covp where belnr = belnr.
endselect.
endloop.
can we make it more specific using only one select query
rgds
anupHi Anupama,
Try to write the code like this..
loop at itab_covp.
select single dlinr belnr from ad01dli INTO AD01DLI-dlinr AD01DLI-belnr
where belnr = itab_covp-belnr .
if sy-subrc <> 0. "if record doesn't exist
DELETE t_covp.
else. "If record exist
SELECT single * from AD01DLIEF into AD01DLIEF
where DLINR = AD01DLI-dlinr and belnr = itab_covp-belnr and dopen <> ''.
if sy-subrc <> 0. "if record doesn't exist
DELETE t_covp.
endif.
endif.
endloop.
This will be the correct logic for your requirement.
Thanks,
Sreenivas Reddy Maddi -
Sales order Change document user exit
A colleague of mine has been asked if there is a way of inserting a different username to the standard one when a change document is created for the sales order header. Is there a userexit that would suffice?
Thanks in advance
IanYou have only one option as far as I know:
All change document creation occurs in function
CHANGE_POINTERS_CREATE centrally.
The only option would be to apply a repair to this function to set the username (CDHDR-USERNAME) to the value you want. You would do this only for sales document change docs - object class is VERKBELEG I think. This is also held on CDHDR.
Hope this helps.
Cheers
Colin -
User exit for changing Sales order lines.
Hello experts ,
I want to delete the field "ROUTE" from all of the orders lines in sales orders, I have been using "USEREXIT_SAVE_DOCUMENT_PREPARE" but it does not seems to do the job.
What is the name of user exit that i have to use for this task and which structure should be used, is it xvbap ? is it vbap ?
Thanks for the help.
Avi.Hi,
find the user exit u required.
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
Best regards,
venkatawamy.y -
PO output Condition record changes
Hello Gurus,
Is there any way to view the changes made to the condition records used for PO output types.
Best regards,
MKHi,
Please find the below points:
1.You dont find any log for the out put condition records in the tables CDHDR and CDPOS.
2.You can able to see the records in the table NAST
3.NACH table gives initial creation of the condition record
4.Change logs.willbe activated the table name you have entered in the condition table and set the the log indicator in the t-code SE11. -
User Exit in VF01 for Tax Conditions
Hello,
Please inform if any user exit is available for processing Conditions (Tax) in a Sales Order.
I'm facing a problem that while Invoicing, a certain Tax condition is not being executed.
Thanks,
Shalabh JainHI Colleague,
I will list the available user-exit to be used for Billing Document:
User Exits For Billing
USEREXIT_NUMBER_RANGE (Module pool SAPLV60A, program RV60AFZZ)
The internal number range used in the standard system is specified in the billing type table and can be changed in this user exit. This user exit is only called when the billing documents is created.
USEREXIT_ACCOUNT_PREP_KOMKCV (Module pool SAPLV60A, program RV60AFZZ)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMKCV (header fields).
USEREXIT_ACCOUNT_PREP_KOMPCV (Module pool SAPLV60A)
In this user exit additional fields for account determination that are not provided in the standard system are copied into communication structure KOMPCV (item fields).
USEREXIT_NUMBER_RANGE_INV_DATE (Module pool SAPLV60A, program RV60AFZC)
Depending on the number range, table TVFKD is used to set the billing date (country-specific requirments in Italy). USEREXIT_NUMBER_RANGE is automatically deactivated when this user exit is being applied.
USEREXIT_FILL_VBRK_VBRP (Module pool SAPLV60A, program RV60AFZC)
This user exit is only called when the billing document is created. It is used to provide the header and the item of the new billing document with deviating or additional data.
USEREXIT_PRINT_ITEM (Module pool SAPLV61A, program RV61AFZB)
Printing the item line of a billing document can be supplemented or changed.
USEREXIT_PRINT_HEAD (Modulpool SAPLV61A, Programm RV61AFZB)
Printing the header line of a billing document can be supplemented or changed.
User exits in program RV60AFZD
Short descriptions of the user exits are contained in the program:
USEREXIT_RELI_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAK_AVBPAK
USEREXIT_NEWROLE_XVBPAP_AVBPAK
The following user exits are available in report SAPLV60B for transfer to accounting (function group V60B):
EXIT_SAPLV60B_001: Change the header data in the structure acchd
You can use this exit to influence the header information of the accounting document. For example, you can change the business transaction, "created on" date and time, the name of the person who created it or the transaction with which the document was created.
EXIT_SAPLV60B_002: Change the customer line ACCIT
You can use this exit to change the customer line in the accounting document. This exit is processed once the ACCIT structure is filled in with data from document header VBRK.
EXIT_SAPLV60B_003: Change the customer line in costing
The customer line is filled in differently for costing. You can use exit 003 to influence the ACCIT structure.
EXIT_SAPLV60B_004: Change a GL account item ACCIT You can add information to a GL account item (such as quantity specifications) with this exit.
EXIT_SAPLV60B_005: User exit for accruals
Once all relevant data for accruals was entered in the GL account item, you can add to this data with this exit.
EXIT_SAPLV60B_006: Change the control line ACCIT
You can use exit 006 to add information to the control line.
EXIT_SAPLV60B_007: Change the installment plan
You can use exit 007 to add information to the installment plan
parameters in the GL account item.
EXIT_SAPLV60B_008: Change the transfer structure ACCCR, ACCIT and ACCHD
After the accounting document is filled in with data, you can use exit 008 to change the document once again.
EXIT_SAPLV60B_010: Item table for customer lines
You can use exit 10 to influence the contents of customer lines before they are created.
EXIT_SAPLV60B_0011: Change the parameter for cash account determination or reconciliation account determination
You can use this exit to change inbound parameters in order to influence account determination.
I hope that one of them could be helpful.
Regards
Ruy Castro -
What are the User Exits for Sales Order creation process?
Hi,
what are the User Exits for Sales Order creation process? how can I find them?
thanks in advance,
will reward,
MindaugasPlease check this info:
User Exits In Sales Document Processing
This IMG step describes additional installation-specific processing in sales document processing. In particular, the required INCLUDES and user exits are described.
Involved program components
System modifications for sales document processing affect different areas. Depending on the modification, you make the changes in the program components provided:
MV45ATZZ
For entering metadata for sales document processing. User-specific metadata must start with "ZZ".
MV45AOZZ
For entering additional installation-specific modules for sales document processing which are called up by the screen and run under PBO (Process Before Output) prior to output of the screen. The modules must start with "ZZ".
MV45AIZZ
For entering additional installation-specific modules for sales document processing. These are called up by the screen and run under PAI (Process After Input) after data input (for example, data validation). The modules must start with "ZZ".
MV45AFZZ and MV45EFZ1
For entering installation-specific FORM routines and for using user exits, which may be required and can be used if necessary. These program components are called up by the modules in MV45AOZZ or MV45AIZZ.
User exits in the program MV45AFZZ
The user exits which you can use for modifications in sales document processing are listed below.
USEREXIT_DELETE_DOCUMENT
This user exit can be used for deleting data which was stored in a separate table during sales document creation, for example, if the sales document is deleted.
For example, if an additional table is filled with the name of the person in charge (ERNAM) during order entry, this data can also be deleted after the sales order has been deleted.
The user exit is called up at the end of the FORM routine BELEG_LOESCHEN shortly before the routine BELEG_SICHERN.
USEREXIT_FIELD_MODIFICATION
This user exit can be used to modify the attributes of the screen fields.
To do this, the screen fields are allocated to so-called modification groups 1 - 4 and can be edited together during a modification in ABAP. If a field has no field name, it cannot be allocated to a group.
The usage of the field groups (modification group 1-4) is as follows:
Modification group 1: Automatic modification with transaction MFAW
Modification group 2: It contains 'LOO' for step loop fields
Modification group 3: For modifications which depend on check tables or on other fixed information
Modification group 4: is not used
The FORM routine is called up for every field of a screen. If you require changes to be made, you must make them in this user exit.
This FORM routine is called up by the module FELDAUSWAHL.
See the Screen Painter manual for further information on structuring the interface.
USEREXIT_MOVE_FIELD_TO_VBAK
Use this user exit to assign values to new fields at sales document header level. It is described in the section "Transfer of the customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAK_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBAP
Use this user exit to assign values to new fields at sales document item level. It is described in the section "Copy customer master fields into the sales document".
The user exit is called up at the end of the FORM routine VBAP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBEP
Use this user exit to assign values to new fields at the level of the sales document schedule lines.
The user exit is called up at the end of the FORM routine VBEP_FUELLEN.
USEREXIT_MOVE_FIELD_TO_VBKD
Use this user exit to assign values to new fields for business data of the sales document. It is described in the section "Copy customer master fields into sales document".
The user exit is called up at the end of the FORM routine VBKD_FUELLEN.
USEREXIT_NUMBER_RANGE
Use this user exit to define the number ranges for internal document number assignment depending on the required fields. For example, if you want to define the number range depending on the sales organization (VKORG) or on the selling company (VKBUR), use this user exit.
The user exit is called up in the FORM routine BELEG_SICHERN.
USEREXIT_PRICING_PREPARE_TKOMK
Use this user exit if you want to include and assign a value to an additional header field in the communication structure KOMK taken as a basis for pricing.
USEREXIT_PRICING_PREPARE_TKOMP
Use this user exit if you want to include or assign a value to an additional item field in the communication structure KOMP taken as a basis for pricing.
USEREXIT_READ_DOCUMENT
You use this user exit if further additional tables are to be read when importing TA01 or TA02.
The user exit is called up at the end of the FORM routine BELEG_LESEN.
USEREXIT_SAVE_DOCUMENT
Use this user exit to fill user-specific statistics update tables.
The user exit is called up by the FORM routine BELEG-SICHERN before the COMMIT command.
Note
If a standard field is changed, the field r185d-dataloss is set to X. The system queries this indicator at the beginning of the safety routine. This is why this indicator must also be set during the maintenance of user-specific tables that are also to be saved.
USEREXIT_SAVE_DOCUMENT_PREPARE
Use this user exit to make certain changes or checks immediately before saving a document. It is the last possibility for changing or checking a document before posting.
The user exit is carried out at the beginning of the FORM routine BELEG_SICHERN.
User exits in the program MV45AFZA
USEREXIT_MOVE_FIELD_TO_KOMKD
Use this user exit to include or assign values to additional header fields in the communication structure KOMKD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMPD
Use this user exit to include or assign values to additional item fields in the communication structure KOMPD taken as a basis for the material determination. This is described in detail in the section "New fields for material determination".
USEREXIT_MOVE_FIELD_TO_KOMKG
Use this user exit to include or assign values to additional fields in the communication structure KOMKG taken as a basis for material determination and material listing. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_MOVE_FIELD_TO_KOMPG
Use this user exit to include or assign values to additional fields in the communication structure KOMPG taken as a basis for material determination and material listung. This is described in detail in the section "New fields for listing/exclusion".
USEREXIT_REFRESH_DOCUMENT
With this user exit, you can reset certain customer-specific fields as soon as processing of a sales document is finished and before the following document is edited.
For example, if the credit limit of the sold-to party is read during document processing, in each case it must be reset again before processing the next document so that the credit limit is not used for the sold-to party of the following document.
The user exit is executed when a document is saved if you leave the processing of a document with F3 or F15.
The user exit is called up at the end of the FORM routine BELEG_INITIALISIEREN.
User-Exits in program MV45AFZB
USEREXIT_CHECK_XVBAP_FOR_DELET
In this user exit, you can enter additional data for deletion of an item. If the criteria are met, the item is not deleted (unlike in the standard system).
USEREXIT_CHECK_XVBEP_FOR_DELET
In this user exit, you can enter additional data for deletion of a schedule line. If the criteria are met, the schedule line is not deleted (unlike in the standard system).
USEREXIT_CHECK_VBAK
This user exit can be used to carry out additional checks (e.g. for completion) in the document header. The system could, for example, check whether certain shipping conditions are allowed for a particular customer group.
USEREXIT_CHECK_VBAP
This user exit can be used to carry out additional checks (e.g. for completion) at item level.
USEREXIT_CHECK_VBKD
The user exit can be used to carry out additional checks (e.g. for completion) on the business data in the order.
USEREXIT_CHECK_VBEP
This user exit can be use to carry out additional checks (e.g. for completion) on the schedule line. During BOM explosion, for example, you may want certain fields to be copied from the main item to the sub-items (as for billing block in the standard system).
USEREXIT_CHECK_VBSN
You can use this user exit to carry out additional checks (e.g. for completion) on the serial number.
USEREXIT_CHECK_XVBSN_FOR_DELET In this user exit, you can enter additional criteria for deletion of the serial number. If the criteria are met, the serial number is not deleted (unlike in the standard system).
USEREXIT_FILL_VBAP_FROM_HVBAP
You can use this user exit to fill additional fields in the sub-item with data from the main item.
USEREXIT_MOVE_FIELD_TO_TVCOM_H
You can use this user exit to influence text determination for header texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
USEREXIT_MOVE_FIELD_TO_TVCOM_I
You can use this user exit to influence text determination for item texts. For example, you can include new fields for text determination or fill fields that already exist with a new value.
User-Exits for product allocation:
The following user exits all apply to structure COBL, in which the data for account determination is copied to item level.
USEREXIT_MOVE_FIELD_TO_COBL
Option to include new fields in structure COBL.
USEREXIT_COBL_RECEIVE_VBAK
Option to assign values from the document header to the new fields.
USEREXIT_COBL_RECEIVE_VBAP
Option to supply values from the item to the new fields.
USEREXIT_COBL_SEND_ITEM
A changed field can be copied from the structure into the item. You could use the user exit to display a certain field in the account assignment block (see also MV45AFZB).
USEREXIT_COBL_SEND_HEADER
A changed field can be copied from the structure to the header (see source text MV45AFZB)
USEREXIT_SOURCE_DETERMINATION
You can use this user exit to determine which plant will be used for the delivery. In the standard system, the delivering plant is copied from the customer master or the customer-material info record. If you want to use a different rule, then you must enter it in this user exit.
USEREXIT_MOVE_FIELD_TO_ME_REQ
With this user exit you can include additional fields for the following fields:
EBAN (purchase requisition)
EBKN (purchase requisition-account assignment)
USEREXIT_GET_FIELD_FROM_SDCOM
Option to include new fields for the variant configuration. Fields that are included in structure SDCOM can be processed and then returned to the order.
USEREXIT_MOVE_WORKAREA_TO_SDWA
You can use this user exit to format additional work areas for the variant configuration. You will find notes on the user exit in MV45AFZB.
User-Exits for first data transfer:
The following user exits can only be used for the first data transfer.
Note
Only use the user exits if the names/fields do NOT have the same name.
USEREXIT_MOVE_FIELD_TO_VBAKKOM
Option to include additional fields in structure VBAKKOM (communiction fields for maintaining the sales document header)
USEREXIT_MOVE_FIELD_TO_VBAPKOM
Option to include additional fields in structure VBAPKOM (communication fields for maintaining a sales item)
USEREXIT_MOVE_FIELD_TO_VBEPKOM
Option to include additional fields in structure VBEPKOM (communication fields for maintaining a sales document schedule line)
USEREXIT_MOVE_FIELD_TO_VBSN
You can use this user exit to include fields in structure VBSN (scheduling agreement-related change status).
USEREXIT_MOVE_FIELD_TO_KOMKH
You can use this user exit to include new fields for batch determination (document header).
USEREXIT_MOVE_FIELD_TO_KOMPH
You can use this user exit to include new fields for batch determination (document item).
USEREXIT_CUST_MATERIAL_READ
You can use this user exit to set another customer number in the customer material info record (e.g. with a customer hierarchy)
USEREXIT_NEW_PRICING_VBAP
Option for entry of preconditions for carrying out pricing again (e.g. changes made to a certain item field could be used as the precondition for pricing to be carried out again). Further information in MV45AFZB.
USEREXIT_NEW_PRICING_VBKD
Option for entry of preconditions for carrying out pricing again (e.g. changes to the customer group or price group could be set as the preconditions for the system to carry out pricing again). Further information in MV45AFZB.
User-Exits in Program MV45AFZD
USEREXIT_CONFIG_DATE_EXPLOSION
The BOM is exploded in the order with the entry date. You can use this user exit to determine which data should be used to explode the BOM (explosion with required delivery date, for example).
User exits in the program FV45EFZ1
USEREXIT_CHANGE_SALES_ORDER
In the standard SAP R/3 System, the quantity and confirmed date of the sales document schedule line is changed automatically if a purchase requisition is allocated, and it or the sales document is changed (for example, quantity, date).
If you want to change this configuration in the standard system, you can define certain requirements in order to protect your sales orders from being changed automatically. Use this user exit for this purpose. Decide at this point whether the schedule lines are to be changed.
User-Exits in Program RV45PFZA
USEREXIT_SET_STATUS_VBUK
In this user exit you can you can store a specification for the reserve fields in VBUK (header status). Reserve field UVK01 could, for example, be used for an additional order status (as for rejections status, etc.).
The following workareas are available for this user exit:
VBUK (header status)
FXVBUP (item status)
FXVBUV (Incompletion)
USEREXIT_SET_STATUS_VBUP
In this user exit you can you can store a specification for the reserve fields for VBUP (item status).
The following workareas are available for this user exit:
FXVBAP (Item data)
FXVBAPF (Dynamic part of order item flow)
FXVBUV (Incompletion)
USEREXIT_STATUS_VBUK_INVOICE
You can use this user exit to influence billing status at header level.
User exits in the screens
Additional header data is on screen SAPMV45A 0309, additional item data on screen SAPMV45A 0459. These screens contain the Include screens SAPMV45A 8309 or SAPMV45A 8459 as user exits.
Fields which are also to be included in the sales document for a specific installation should be included on the Include screens for maintaining. If an application-specific check module is needed for the fields, this can be included in the Include MV45AIZZ. The module is called up in the processing logic of the Include screens.
For field transports, you do not have to make changes or adjustments.
Example
A new field, VBAK-ZZKUN, should be included in table VBAK.
If the check is defined via the Dictionary (fixed values or check table) the field must be included with the fullscreen editor in the Include screen SAPMV45A 8309. In this case, no change has to be made to the processing logic.
User Exits in Program MV45AFZ4
USEREXIT_MOVE_FIELD_TO_KOMK
You can use this user exit to add or edit additional header fields in the communication structure - KOMK- for free goods determination. For more information, see the New Fields for Free Goods Determination IMG activity.
USEREXIT_MOVE_FIELD_TO_KOMP
You can use this user exit to add or edit additional item fields in the communication structure KOMP for free goods determination. For more information see the New Fields for Free Goods Determination IMG activity.
User Exits in the SAPFV45PF0E and SAPFV45PF0C Programs
EXIT_SAPFV45P_001
You can use this user exit to decide whether intercompany billing data is used in the profitability segment for cross-company code sales, or whether the data comes from external billing (external customer, sales data from the selling company code.
Regards
Eswar
Maybe you are looking for
-
Illustrator CC editing symbol goes infinite loop, how to get out of?
Hey all I'm editing a fairly complex illustrator symbol instance (its a world map vector), and now I've gone to go back to the original artboard but for whatever reason the program can't get out of a PROGRESS / SAVE modal popup box and the progess ba
-
hi, Need to bring j2ee application to portal environment. can i bring it in the first hand? if so how can i do it? Regards, Bob
-
Can I make a chart automatically source data from different parts of a table?
Hi! I have a chart that shows data entered into one row across several columns of a table. I want the chart to automatically display information from the next row down once data has been entered into all fields of the first row without the chart disp
-
Creative Suite 3 Premium on Windows 8
Does Creative Suite 3 Premium (CS3) run on Windows 8? Thanks!
-
Oracle enterprise planning and budgeting and public sector budgeting
What is the difference between Oracle Enterprise Planning and Budgeting and oracle public sector budgeting early response is requested please