Change Pointers for the fields PERNR, GBDAT and PERID

Hi,
I want to know, how we can delete/de-activate and then add/activate Change Pointers for these fields. Is my Question a valid one? Please guide me if I'm wrong and help me in this issue.
Thanks in advance,
Exertive.
Message was edited by:
Exertive

Hi Suresh,
I didn't get your point exactly. With this report, we can only Log the Changes that has been performed on a Particular Pernr or an Infotype. Actually, if see go through my Previous Post, you will get Clear Idea. Actually, I'm looking for the Concept below:
Actually, I'm using the Standard ALE Process for Masking Master Data fields (PERID and GBDAT) with default values from one system to another using the Message Type, HRMD_A (which will be used as a Standard Message Type for HR Personnel Administration and Organizational Management). For this, I' have used two Conversion Rules in the above Message Type. To make this ALE trigger, I have to Run the Report, RBDMIDOC. But, before trigerring the ALE for all the Employees in the System, I want to test the ALE for few Employees, whether it is working properly or not. For this, I think, I need to delete the Change Pointers for all the Employees except for the few Employees whom I want to Test. But, I don't have any idea, how to delete those Change Pointers. Please guide me some solution or provide me some document where I can find exact procedure for doing this. Guide me, If I'm going in wrong procedure.
Thanks in advance,
Exertive.

Similar Messages

Change pointers for the ZSEGMENT of IDOC Extension.

Hello Experts,
We are working on the SAP version ECC 5.0.
Our requirement is creating the ZZField and use this field to interface with legacy systems in the trnx FD02 and table KNB1.
We have created the ZZField in table KNB1 and also ZSEGMENT for the IDOC DEBMAS06.
We want to add the IDOC change pointers proramme for this ZSEGMENT that is being created.
I know there are two methods of doing this:
OLD METHOD:USER EXIT....
NEW METHOD:CALL CUSTOMER FUNCTION'...'
I tried the old method with the user EXIT_SAPLVV01_0001 for the Cutomer master.
But I am getting the error as
PROGRAMME NAMES zx....ARE PRESERVED FOR THE INCLUDES OF EXIT FUNCTION GROUPS.
Can any one tell me how do i need to write the programme for the IDOC CHANGE POINTERS for the ZSEGMENT?
Thank you.

Our requirement is creating the ZZField and use this field to interface with legacy systems in the trnx FD02 and table KNB1.
We have created the ZZField in table KNB1 and also ZSEGMENT for the IDOC DEBMAS06.
in the above question watr the fields ur going to populate in KNB1 TABLE or in ZSEGMENT FOR DEBMAS06.
CAN U PL GUIDE ME..
thanking u...
ajay

CSKS, KS02 change pointers for Z fields

Hi,
I have extended CSKS with new Z fields. Also ALE'ed this to other SAP system.
But this is not creating any change pointers for this new z fields.
The changes are tagged in CDHDR, but not into BDCP2 table. Is there any settings
which needs to be done by which it will create CP automatically when we change Z fields
in KS02.
Appreciate your help.
Thanks
Manohar

Found solution with BD52 tcode.
Thanks

How to implement Change pointers for Purchase order - ME22N - Custom Fields

Hi Experts,
Can you please tell me how to implement - Change Pointer for Custom fields in IDOC.
I am working on IDOC - For purchase order - acknowledgements - in custom screen/tab in ME22N.
Everything is working fine according to my requirement.
All i need to know is the process of - Creating/Change - Change pointers for Custom fields.
1.How to implement change pointers for custom fields.
2.Can we maintain - Change Document - for custom fields at data element level?
P.S. - I have browsed many previous - forums before posting a new discussion.
please share your inputs...
explaining how to create/implement - change pointers for custom fields will help me .
Regards,
Karthik Rali.

Hi,
To maintain Change Document for custom field:
1. Check if "Change document" checkbox is set in data element.
2. Find Change Document Object for transaction.
   You can use SQL trace - ST05.
   Look there for line with table CDHDR and statement insert values
   (for example for transaction KA02 Change Document Object is KSTAR)
3. Regenerate update program for this Change Document Object in transaction SCDO
Change documents for z-fields schould be generated.
I am not sure about change pointers but they are configured somehow in BD61 and BD50.

Regarding change pointers for HRMD_A

Hi Abapers,
I need to distribute changes to HR master data to a middleware system. hence i have activated the change pointers for the message type: HRMD_A. now my idoc is populating the infotype segments whenever it is changed with all fields.
But a particular change (on an infotype) should be sent individually in two different runs of RBDMIDOC run to the middleware. Ex: Vendor A needs changes to be sent to it on a weekly basis whereas Vendor B needs changes to be sent to it on a biweekly basis. When an employee X has a change on infotype 2, this change should be sent to middleware in both instances separately in different IDOCS at different times when RBDMIDOC program is run (by capturing change pointers pertinent to the message type of the particular vendor).
What are the changes required for ALE config.? Do i need to create a new message type for vendor B and configure. Please help.
Thanks.

Hi sudarshan,
Yuo need to create Z program to trigger IDOC.
As you need to set read status of change pointer as X after yuo send it to both system.
So you need to create Z table to keep track of this whether you have send to sys a or Sys B..
If you willl not update read status in will cause performance prob.
Hope this helps.
Dhiraj.

How to create change pointers for IT6 when custom table Z777A changes?

Situation: We are using custom table Z777A (copied T777A and added fields) to store building locations. Employee's IT6 subtype 92 retrieves valid work address building locations from table Z777A.
Problem: Whenever there are updates to Z777A, we need to find all IT6 subtype 92 records that use the changed building location from Z777A and create IDOC's The change pointer entry will need to be for the IT6 subtype 92 row that is affected.
Question: Can anyone give me specific details as to how this can be accomplished? Thanks.

Hi,
MASTER DATA CHANGES DISTRIBUTION BY CHANGE POINTER TECHNIQUE:
Step 1: Creating change document object in SCDO transaction.
Step 2:Assigning tables to the change document object.
Step 3:Specifying change document items in transaction BD52.
Step 4: Activating change pointers for the message type HRMD_ABA in transaction BD50.
Step 5:Activating change pointers globally.
Step 6:Executing program RBDMIDOC in SE38, Specifying message type HRMD_ABA.
with regards,
M.Sreeram.

Article Change Documents for Custom Fields

Hi,
We have lot of custom fields defined in the article master. When the custom fields are changed through the online transaction, the changes are recorded in the change document tables (CDHDR / CDPOS). If the changes are made through the "BAPI_MATERIAL_MAINTAINDATA_RT" the changes are not getting recorded in the change document tables and hence they cannot be viewed under "Environment -> Display Changes". Lately, this is causing big issues as users are using the custom attributes more seriously now..and we're having issues tracing back the changes...Users do not use online transactions to make the changes..The changes are submitted through the portal which are then submitted through the ARTMAS IDOC which in turn calls the BAPI....
We want to activate the change document functionality through IDOCs/BAPI....Is it configurable or has to be coded somewhere in the BAPI where it generates the custom segments for the custom fields....
Any help would be greatly appreciated
Thanks,
Sri

Hi,
You can use txn BD51 in which you can specify "BAPI_MATERIAL_MAINTAINDATA_RT" and use "o" as Input without checking the Dialog allowed option.
I assume that you have already done the relevant settings for the change pointers for message type ARTMAS( BD50) and activate change poiinter for relevant document changes (in Txn BD52 by maintaining the relevant Object - MAT_FULL,Table name - MARA and ZZ fields)
Hope this helps,
Best Regards,
Aram.

Why change pointers for master data, why not change message?

Hi Gurus,
I have one doubt about Idoc.
When changes to master data has to be sent Change pointers are configured and used. (CDPOS & CDHDR). In case of the transaction data change change idoc is used as is the case with orders (we use ORDCHG for ORDERS message type to send the chnage details to a order which was already sent to other system.
Why we can't use change idoc or message type whatever, instead of Chnage pointers in case of master data or vice versa in case of transaction data.
Your valuable input will be rewarded with suitable points!!
-B S B.

Change pointers are getting stored in the tables BDCP and BDCPS. As SAP suggests these tables should be as small as possible. And Master data are not much frequently changed data.
As you compare with the transactional data, you need to change them many times in the real scenario. If we also process the transaction data via chnage pointer, these changes BDCP is getting more and more entries.
RBDCPCLR is the program used to process the change pointer. If you have much data in the BDCP table, this program will take much time to run.
So, we use the change pointers for the master data only.
Regards,
Naimesh Patel

For abap-hr i need datatype and length for the fields which i selected

hi seniors,
      I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
      I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.

Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME        PA0001
FIELDNAME     PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
    TABNAME              = 'PA0001'
*   FIELDNAME            = ' '
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
*   DO_NOT_WRITE         = ' '
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = MY_DFIES_TAB
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3.
Hope this was of some help.
Best regards,
Sagar.

Change pointers for QPMK and QSMT

QPMK Replication of QM master inspection characteristics (ALE)
QSMT Replication of QM inspection methods
I activate change pointers for QPMK and QSMT using BD50.
I want to enter change document items for QPMK and QSMT using BD52.
How do I find the document items for these message types to enter in BD52?
Can these message types use change pointers?

Please respond anyone

Is there a way to change the formulas for the fields of the Quiz Results slide?

I see the placeholders for the fields on the Quiz Results Slide (Number of Questions = {total-questions}). Is there a way to view and change those calculations?

You can select which variables appear on the Quiz Results slide, but you cannot really change the calculations used by Captivate under the hood.
Depending on what you're trying to achieve, you might be able to insert your own captions reading off the same variables and use Advanced Actions and Expressions to cook up different results. But it depends very much on what you want to do and whether or not the variables are exposed, and whether or not the limited Expressions available will allow the math.

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

Options for when an iOS device gets locked because of forgotten passcode:
Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
If recovery does not work there's:
DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

I have created a series of pdf schematics in a portfolio that revolves. For the field service techs I would like it to work on a smart phone or tablet. On the phones and tablet, they do not revolve. Any idea's?

I have created a series of pdf schematics in a portfolio that revolves. For the field service techs I would like it to work on a smart phone or tablet. On the phones and tablet, they do not revolve. Any idea's? I am using Adobe Acrobat 9 Pro. It looks great and works as expected on my system, but the techs cannot scroll through the different prints.

Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

Need to set default values for the fields plant and location in ME21N

Hi All,
i need to set default values for the fields plant and location in ME21N tcode.
In accout assignment if we give 'A' then we need to create asset by clicking the Asset tab,there you have the fields plant and location.
How to resolve this?
Thanks in Advance

hi .
i needed to set default strorage location and plant in personal setting in me21n.
i solve it with this way.
go to program SAPLMEPERS in se38.
create new function in output with the sample name :MODULE ZTEST_001 OUTPUT.
in this module write:
if MEPOITEM_PROP-WERKS is INITIAL and MEPOITEM_PROP-LGORT is INITIAL.
MEPOITEM_PROP-WERKS = '1000'.
MEPOITEM_PROP-LGORT = '0032'.
endif.
this is the solution.
best regards.
maryam

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Change Pointers for the fields PERNR, GBDAT and PERID

Similar Messages

Maybe you are looking for