Change Policy of the main menu
I would like change the policy of the main menu Arial 15 or 17, to mistral or any hand writing to get in Armorny with th page edit
Any tips
If you use a non Web Safe Font any computer that doesn't have that font will substitute another for it and it probably will not fit the format or look of the site. But you can change the font by selecting it, clicking on the Font button at the bottom and selecting what you want to use.
To make that new font look the same in any web browser on any computer add a drop shadow to it and set the opacity to 1 or zero percent. If you have iWeb's preferences set to indicate which text has been converted you'll see the following:
Click to view full size
That will, however, add size to the web page and cause it to load more slowly in browsers. Too many image files on a site is murder for Internet Explorer. Use this method sparingly.
OT
Similar Messages
-
Is there a way of just changing the text to the main menu..but not the submenus?
Is there a way of just changing the text to the main
menu..but not the submenus?
Also i have looked at in the browser and when i glide over
the menu catergories or click on them they dont show the
submenu...what can i do to solve this?Does the example described at
http://labs.adobe.com/technologies/spry/articles/menu_bar/index.html
work for you?
What are you doing that's different from the example?
When you say you just want to change the text of the main
menu without changing the submenus, do you mean you want to do so
dynamically, at some later stage after the page has loaded?
If so, you could try retrieving the main menu elements you
want to update from the DOM and updating them from your script's
event handler for whatever event it is that you want to update them
in response to. This presumes the widget will detect this and
update appropriately, which I can't say for sure since I haven't
actually tried it.
Hope that helps!
Rob -
Issues changing the lettering on the main menu
Hello
I created a website www.franciscobulgarelli.com a year ago, I went back and added some new pages but I'm having a hard time making the letter size uniform, I go on the main menu to change it but it doesnt seem to respond, the 2 new pages, narrative and music video are capitalized and some of the other pages are not, the application does not seem to be taking the changes.
any help will be appreciated
Francisco
Also, how do I transfer my website from one computer to another, I built it on my 20" and now have a 27" and want to continue to working on it
thanksFrancisco ~ Welcome to the discussions.
fjbz wrote:
Also, how do I transfer my website from one computer to another...
See this post:
Editing my iWeb page from another computer
Or, if you feel this way...
Domain file - iWeb becoming a headache
By the way, rather than posting your URL like this:
www.franciscobulgarelli.com
...include the prefix to make it conveniently clickable:
http://www.franciscobulgarelli.com -
How to add a privacy page and exclude it from the main menu, but include in links at the base
adding a privacy statement page and excluding it from the main menu, but including in links at the base of site
Right click on the page in Plan view and choose to exclude from menus. This will take it off your main nav.
For your bottom nav, change the menu to manual and add the privacy page manually. -
Trouble scrolling on the main menu using my dvd player.
I can't seem to move to the scenes button when I'm on the main menu using my DVD player. This function seems to work fine on my computer. Before I burn another (very long) disc and try again, does anyone have any suggestions?
NatalieIf I have two buttons, one for Subtitles on and one for Subtitles off, how do I make it so that the one that is chosen is highlighted?
You set it by changing the menu's property for the default button. This is one of the reasons a separate menu is generally used. If you have a single menu with 3 buttons ("play movie," "subtitle on," and "subtitle off"), and you set the default to "Active Subtitle Track," then your "play movie" button won't ever be the default.
To play with this and to decide how you want your disk to work, create a test EN project with 2 menus. Rename one of them "Main Menu" with 2 buttons "Play Movie" and "Subtitle Setup." Rename the second menu "Subtitle Setup" with 3 buttons, "Subtitle On," "Subtitle Off," and "Main Menu." As noted, the "Default Button" property for the menu "Subtitle Setup" will be "Active Subtitle Track." The button "Subtitle On," using specify link, will link to its own menu, default button, but will specify Subtitle 1. Same for the button "Subtitle Off," except that it will specify Subtitle Off. The Main Menu button simply links to the main menu.
Note that in Encore preview, do not use your computer mouse to hover over the buttons. It will trick you into thinking that you have or have not set the behavior correctly. Use the little remote function in the bottom of the preview window. -
Adding/Removing items from the main menu
I don't know why my iPod won't let me add or remove items from my main menu.
I go
Settings > Main Menu > (check what I want on the main menu) > Reset Main Menu > Reset
When I go out to the main menu again, nothing has changed.
Anyone else having this problem? Thank you for help!If you do a reset then you're resetting it to default. If you want to change anything ya just change it to on/and or off, then hit the menu button to go back. Don't go all the way to reset. Hope this helps.
-
Shuffle songs from the main menu includes audio books
When I choose Shuffle Songs from the main menu - audio books seems to be included in the shuffle list. Is that how it's suppose to be?
Yes, the audio books are tagged as such and do not appear in the song list when i browse it manually.Hello there,
Not sure if that is the way it supposed to be or just one of those little quirks that hasn't been worked out yet by Apple.
This may be the case, but you can set these tracks to "skip when shuffling" in iTunes so that the next time you hit Shuffle on your iPod, these tracks will not be played. To do this, locate the songs in iTunes, right->click on them and choose "Get Info" from the shortcut menu. From there head over to the Options tab and make sure there is a tick mark next to "Skip when shuffling." Then hit OK and sync the updated changes to your iPod.
Sort of a work around for now, but I hope it helps.
B-rock -
Having trouble creating an On/Off button for the subtitles on the main menu
Hello!
I'm creating a DVD with one subtitle track that I'd like to be ON by default but I want users to have the ability to turn them off without the use of the remote. I was thinking of creating a Subtitle on/off button but can't seem to get this to work even though I've read several tutorials. Do I need to create a separate 'set-up' menu with a 'subtitles on' and 'subtitles off' button?
As of right now I have a single button on the main menu that says 'Subtitles On' which I was planning to be dark blue when active (on) and light blue when inactive (off). See what I'm talking about here: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.26.47-PM.png
See also: http://pfti.org/wp-content/uploads/2013/07/Screen-shot-2013-07-12-at-1.33.48-PM.png
Any help/suggestions/advice would be much appreciated! Thanks in advance!
NIf I have two buttons, one for Subtitles on and one for Subtitles off, how do I make it so that the one that is chosen is highlighted?
You set it by changing the menu's property for the default button. This is one of the reasons a separate menu is generally used. If you have a single menu with 3 buttons ("play movie," "subtitle on," and "subtitle off"), and you set the default to "Active Subtitle Track," then your "play movie" button won't ever be the default.
To play with this and to decide how you want your disk to work, create a test EN project with 2 menus. Rename one of them "Main Menu" with 2 buttons "Play Movie" and "Subtitle Setup." Rename the second menu "Subtitle Setup" with 3 buttons, "Subtitle On," "Subtitle Off," and "Main Menu." As noted, the "Default Button" property for the menu "Subtitle Setup" will be "Active Subtitle Track." The button "Subtitle On," using specify link, will link to its own menu, default button, but will specify Subtitle 1. Same for the button "Subtitle Off," except that it will specify Subtitle Off. The Main Menu button simply links to the main menu.
Note that in Encore preview, do not use your computer mouse to hover over the buttons. It will trick you into thinking that you have or have not set the behavior correctly. Use the little remote function in the bottom of the preview window. -
My MacBook wouldn't go to sleep, it keeps loading, so I have to turn it off. When I turn it on a blank screen comes on, I shut the lid and open it and the main menu screen comes up but the cursor won't work for awhile. Then, eventually, the cursor will work and everything is fine. Hmmm?
Just in case it still didn't work...I copied and pasted the information below...
Battery Information:
Model Information:
Serial Number: D86052301B8DCMDAG
Manufacturer: SMP
Device Name: bq20z451
Pack Lot Code: 0000
PCB Lot Code: 0000
Firmware Version: 0301
Hardware Revision: 000a
Cell Revision: 0173
Charge Information:
Charge Remaining (mAh): 3638
Fully Charged: No
Charging: No
Full Charge Capacity (mAh): 4196
Health Information:
Cycle Count: 631
Condition: Normal
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 8103
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 10
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 10
Wake on AC Change: No
Wake on Clamshell Open: Yes
Wake on LAN: Yes
Current Power Source: Yes
Display Sleep Uses Dim: Yes
Standby Delay: 4200
Standby Enabled: 1
Battery Power:
System Sleep Timer (Minutes): 62
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 62
Wake on AC Change: No
Wake on Clamshell Open: Yes
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Standby Delay: 4200
Standby Enabled: 1
Hardware Configuration:
UPS Installed: No
AC Charger Information:
Connected: Yes
ID: 0x0100
Wattage (W): 60
Revision: 0x0000
Family: 0x0085
Serial Number: 0x000979a4
Charging: No -
Want my DVDs to auto start with the main menu when inserted into a player
I used idvd to burn an imovie that I made. I have a main menu theme from idvd on the project but when I insert the dvd into a dvd player or computer, the project automatically starts playing without going to the main menu first. How can I make it so it goes to the main menu first, allowing me the chance to click the button I made on the menu to play the project. THANK YOU SOO MUCH FOR ANY HELP!!
By default, projects created with iDVD will always go to the menu screen first. If it doesn't that usually means you made a change to the iDVD map.
To check, click on the "Map" button (Three small squares joined by a line at the bottom of the screen).
Take a look at the far left menu square. If there is anything in this square it will play that square first before going to the menu.
Click on that left hand square and tap the delete key to remove the auto-play item.
Hope that helps. -
Firefox was fine on my LapTop earlier today, Now, I have no access or visualization of the Main Menu Listings that are usually just below the title bar,i,e,,File,Edit,View,History,Bookmarks, Helpetc. Since I don' have access (it's not there), I cannot change settings. I have uninstalled and re-installed and it re-installs the same way.
* In Firefox 3.6 versions on Windows and Firefox 4 on Windows and Linux it's possible to hide the "Menu Bar" via "View > Toolbars" or via the right-click context menu of a toolbar.
* Press F10 or press and hold the Alt key down to bring up the "Menu Bar" temporarily.
* Go to "View > Toolbars" or right-click the "Menu Bar" or press Alt+V T to select which toolbars to show or hide (click on an entry to toggle the state).
See also:
* [[Menu bar is missing]]
* http://kb.mozillazine.org/Toolbar_customization -
Why does my iDVD project skip the main menu screen when starting?
I just finished a movie in iMovie 09, chose iDVD from the iMovie menu, chose a theme, etc., all was fine, burned the DVD and it works great except it starts the movie instantly rather than showing the opening screen with the main menu.
When you export to iDVD from iMovie 09, iMovie usually creates an iDVD project in which your movie plays automatically before the main menu is shown. As SDUser has said, you can get rid of that behaviour by going into the DVD map and dragging out the very first item.
A hint: if you have chapter markers in your movie, and you are using a theme that has motion menus, open up the Inspector (the little i button bottom left in iDVD) and while you are in the Map view click on each menu. Take a look at the length of the menu loop. There is a bug in iDVD that often causes it to make ridiculously long menu loops (in one case 3 hours, even though the menu music clip was 30 seconds and the whole movie was under an hour). That will cause iDVD to take forever rendering your project, and will waste a lot of DVD space that you are need for your main movie. Just drag the slider back to a sensible menu loop length. But go back and check before you burn; as soon as you edit anything else in the menu (for example change the music background) the loop length will have to be fixed again. -
A few weeks ago I noticed that the items in the main menu bar are not updated, do not work, and cannot be selected. When I move the cursor over this area, the rainbow cursor appears and nothing can be selected. As a result, the time, date, battery status, finder, and sound icons in the upper right hand corner no longer function. I have shut down and restarted the computer, but the problem still persists. Any available help on this issue would be greatly appreciated. Thanks!
Powerbook G4 Mac OS X (10.4.4)Niel, I followed your suggestion, but nothing seemed to change. I couldn't find the exact file, but found one that was very similar....com.apple.systemuiserver.plist...... I dragged the icon to the desktop and then attempted to move it to the upper right corner, but the rainbow cursor was displayed and nothing happened. Do you have any other ideas? Thanks for your assistance.
-
Background Audio on the main menu
How do you change the volume on the main menu of background audio?
Using Chuck's recommendation, I find that about -6db to -12db is a good starting point. Be aware that different audio editing programs use slightly different db scales and that all VUE meters are not the same. Experiment until you find the "sweet spot" and jot it down someplace. That will be your starting point for other Audio, however only listening will get you exactly what you want and need.
Hunt -
Product: iMac, OS X 10.9.5 (13F34)
Processor: 3.5 GHz Intel Core i7
Memory: 32 GB 160 MHz DDr3
Storage: 3.12 TB Fusion Drive
PROBLEMS:
1. When clicking on the Finder icon in the dock, the main menu grays out and the window with documents, applications etc., does not pop up.
2. iMac is not showing up in iCloud.com and, not syncing with my MacBook Pro, iPad Mini and iPhone.
This situation seemed to appear after doing updates on my iMac.
TROUBLESHOOTING I'VE TRIED:
1. rebooted,
2. repaired permissions,
3. booted in safe-mode and let the basic tests run then rebooted to normal mode. Afterwards, the problem seemed to be corrected, however, it re-appeared shortly thereafter and still exists.Go to the Finder's General preference pane and reset the New Finder windows show: option. Try changing it to some other folder, try it and then back again.
If that doesn't jump start it try moving the com.apple.finder.plist file from your Home/Library/Preferences folder to the Desktop, reboot and then reset the Finder preferences.
For Mavericks and Yosemite go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
Maybe you are looking for
-
What can I do when I have downloaded RAW plugin 8.7.1 and it wont work on either PSE 12 or PSE 13????
-
Hi , Iam having a JList with some strings in it .I'll be selecting multiple values from it .(Multiple_interval_selection model) .I need to store the values in JList to database (Ms access).I couldn't do it .So many times i have tried .The values are
-
Inserting variable data markers in tables on master pages
I have a two-cell table on a verso master page that is styled and set to hold my <ChapterNumber> and <ChapterTitle>. A one-cell table is set on the recto master page to hold my <A_Head>.<br /><br />The problem is that I can't seem to insert the varia
-
Grab files print at Bottom of Page
I don't remember Grab>Capture>Selection printing at the bottom of a page before. Any way to change it to print at the top of the page.
-
I tried to reset all my preferences to the prior version. Nothing works. I cannot not copy/paste from the mouse anymore. I cannot eliminate ads (I used to). I cannot make calls from Gmail like before this version? I am very frustrated.