Change port number for Oracle Microsoft Transaction Services - How????

Hi All,
I reasonably new to this DBA role and was doing an install of Oracle 9i on a new server, (only done an Oracle install about 3 times). Our senior DBA was out so when the screen came up asking for the port to use for MTS I couldn't remember if I should take the default (2030) or put something different in there, so I IM'ed our senior DBA and he told me to use 1521, (our listener port), by mistake. So when I finally get Oracle installed and runing I can't use 1521 with the listener as it tells me it is already being used. I know we don't have to use 1521, but I would like to so we are consistent. In order to use 1521 I need to change the port for MTS back to 2030.
I've searched and searched and since we don't use MTS I cannot figure out where to change the port back to 2030. If someone could tell me in simple steps how to change this it would be really really appreciated.
Thanks
Gordon

If operating system is windows then open registry, find oracle under local system/software,then find oracle MTS in right side u will see word "port"
right click and modify its value as req
Ramchandra

Similar Messages

10g express, how to change port number for the database home page

10g express uses port 8080 for its http listener. However this number has been used by Tomcat on my computer. How can I chang the port number for the 10g home page?
Regards
jl

Andy, thank you very much, I have been able to changed the port number following your advice.
I hope you do not mind I ask a further questions along this line:
I installed 10 express db on 2 computers. One with Tomcat and the other without. Following your advice, I successfully changed the port number on the one without Tomcat.
On the one with Tomcat, I believe it was because I installed the 10g express while the Tomcat was running, I can neither go to the 10g's home page (page cannot be displyed), nor logon to the database from sqlplus (ora-12560: TNS:protocal error) even after I shut down the Tomcat. By checking with 'netstat -an', it is known that the http listerner is not listerning.
Can I change some configuration file to solve this problem? Or do I have to reinstall 10 ex? I prefer the 1st aproach of changing config file, even it is not as easy as reinstallation.
Thanks
jl

Changing port number for mobile server after installation

hi,
i am using windows 2003 server release 2,oracle 11g database R2 and oracle database lite 10g R3. i have installed mobile server successfully with port 80 but when i start the mobile server i receive an error stating that the port 80 is already in use. Now i need to change the port number of the mobile server. can anyone tell me the solution.

If the Oracle Lite installation type is STANDALONE , then to change the Olite port number to any other available free port number , you have to edit the file default-web-site.xml or http-web-site.xml file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.
You can change the port any time in http-web-site.xml file and bounce the services, the new port will take effect.

Change port number for EM

I had to recreate EM due to machine name and db domain (etc.) changes. And now the port number is 5502 instead of default 5500. Is there an easy way to set it back to 5500? Thanks.

Do you have any problem running this with the new port number? If no, you can leave it as it is because Oracle Installation picked the next available port number starting from 5500. So it is not a prblem running it with the new port number.
If you must change it, then do the following
Stop DB Console
Change the ConsoleServerPort property in $ORACLE_HOME\<hostname_sid>\sysman\config\emoms.properties
Change the REPOSITORY_URL property in $ORACLE_HOME\<hostname_sid>\sysman\config\emd.properties
Change all occurrence of old port to new port in $ORACLE_HOME\oc4j\j2ee\<hostname_sid>\config\http-web-site.xml
Start DB Console
Note that $ORACLE_HOME is where your installation is
e.g D:\oracle\ora10g
Hope this helps

Change default port number for web logic!

Hi folks,
In my scenario, i already installed obiee 11g with simple install along with web logic on windows xp machine.where this will creates default port number for all services. now i want to change default port number of web logic that is 7001 to some to other port number. how to change this ??.plss help me asap.
regards,
mahesh

Refer tohttp://www.oracle.com/technology/documentation/1012_solaris/install.1012/install/ports.htm

How to change the port number for deployment in JAVA Studio Enterprise 8?

Hi!
Yesterday i downloaded this new sun java studio enterprise and found it mind blowing.
Now i find that all my previous applications which were running on port 8080 can't be run on sun java studio enterprise(sjse) 8.
Can anyone tell me how to change the port number on this software so i won't have to edit all my applications?

http://docs.sun.com/source/819-0080/install.html
In the Admin Configuration page (or at the command line), enter the following:
Admin User Name�Name of the user who administers the server
Password�Admin user�s password to access the Admin Server (8-character minimum)
Admin Port�Administration port number for initial server instance
HTTP Port�Port number to access the default server instance
HTTPS Port�Secure port number to access the default server instance

Change WOL Port number for clients

Hi All
We want to implement in our environment WOL functionality , for WSUS deployment and scheduled OSD deployments
We cannot unfortunately implement the default UDP port 9
My question is how can we change that default port on the clients?
I know that we can change the port on the primary server -> Site configuration -> Sites -> Properties primary site server -> tab
Port and here we can change the port number of Wake on Lan
For the client I noticed that there is a client setting -> Power Management -> Wake on Lan port Number (UDP) but that number is grayed out and set to 9
Also when I create a custom Client Setting that port number is grayed out and set to 9
How can I change that port number for the client?
Thx in advance
Regards,
Johan

The port number in Client Settings/Power Management is grayed out because "Enable wake-up proxy" is disabled. When you enable it, it becomes available. Be aware that wake-up proxy and wake on lan is 2 different things. (Beware mac address flapping)
To change the Wake On Lan port go to, primary server -> Site configuration -> Sites -> Properties
primary site server -> tab Port.
Wake On LAN port number (UDP)
For System Center 2012 Configuration Manager SP1 and System Center 2012 R2 Configuration Manager only:
Keep the default value of 9, unless you have changed the Wake On LAN (UDP) port number in the site Properties, Ports tab.
Important
This number must match the number in the site Properties. If you change this number in one place, it does not automatically update in the other place.
Benoit Lecours | Blog: System Center Dudes

"Error while accessing porting layer for ORACLE database via getSessionId()

Hi,
My ejb3.0 Entity is created from Emp table in scott/tiger schema of an Oracle 10g database. I am guessing I made some mistake creating the datasource or uploading the driver, because when I run my application, I get a long exception stack trace. The bottom-most entry in the stack trace is:
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing porting layer for ORACLE database via getSessionId().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Actually, now (after the GRANT described in my reply before) the Exception has changed to:
Caused by: com.sap.sql.log.OpenSQLException: Error while
accessing porting layer for ORACLE database via
<b>getDatabaseHost</b>().
     at com.sap.sql.log.Syslog.createAndLogOpenSQLException
(Syslog.java:148)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createPooledConnection(DirectConnectionFactory.java:527)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:158)
     at com.sap.sql.jdbc.direct.DirectConnectionFactory.
createDirectPooledConnection(DirectConnectionFactory.java:118)
     at com.sap.sql.connect.factory.PooledConnectionFactory.
createPooledConnection(PooledConnectionFactory.java:119)
     at com.sap.sql.connect.factory.DriverPooledConnectionFactory.
getPooledConnection(DriverPooledConnectionFactory.java:38)
     at com.sap.sql.connect.datasource.DBDataSourceImpl.
createPooledConnection(DBDataSourceImpl.java:685)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPool(DBDataSourcePoolImpl.java:1081)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
matchPooledConnection(DBDataSourcePoolImpl.java:919)
     at com.sap.sql.connect.datasource.DBDataSourcePoolImpl.
getConnection(DBDataSourcePoolImpl.java:67)
     at com.sap.engine.core.database.impl.DatabaseDataSourceImpl.
getConnection(DatabaseDataSourceImpl.java:36)
     at com.sap.engine.services.dbpool.spi.
ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:123)
     ... 90 more

Change port number of application server

Hi members,
I have installed oracle application server 10.1.3 on a windows 2003 server. The default port that it is listening on is 8888. Is there a way to change the port number? Can you please tell me the procedure? Also, how can I change the port number of Oracle HTTP Server? It is installed on a different machine..
Thanks in advance..

Yes you can change both your OC4J and OHS ports. Refer following for details:
http://download.oracle.com/docs/cd/B32110_01/core.1013/b32196/ports.htm#i1038959
Thanks
Shail

On which port number WDS server will listen & service when installing on server which is also DHCP server?

hi frineds
in documents we read when we install WDS on the server which is also DHCP server, we must select this check mark :
"do not listen on port 67"
it means we instruct the WDS service not to listen on port UDP 67 to avoid a port conflict between WDS server service and DHCP server service.
So now on which port number WDS server will listen & service ?
thanks in advance

Hi john.s2011,
If Windows Deployment Services and DHCP are running on the same physical computer, this means that the DHCP server is listening on port 67 and is responsible ensuring authorization.
The related KB:
How the PXE Server Works
http://technet.microsoft.com/en-us/library/cc732649(v=ws.10).aspx
The related thread:
DHCP is not responding for WDS
http://social.technet.microsoft.com/Forums/windowsserver/en-US/07f98ac7-cc6f-4385-ba21-2e85bb460c03/dhcp-is-not-responding-for-wds
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
hi Alex.
sorry for delay
thanks a lot
regards

Web Enterprise Manager Default Port Number in Oracle 9i

Enabeling Auditing on database 9.2.0.8
Web Enterprise Manager Default Port Number in Oracle 9i:
Does anyone know the default port number of the web enterprise manager (Oracle 9i)?
If I installed or configured enterprise manager and I forgot the port, where can I find it?

You must read the part in the Installation Documentation for certified repository databases to ensure that your database is OK.
My advice is always, never start any installation (not only Oracle) without reading the Documentation, Release Note and any README.
You will spend less time in the installation as Configuration if you use the required documentations for your platform.
http://www.oracle.com/pls/db102/portal.portal_db?selected=21

How do i find the port number for oracle10g

Hi,
I have installed oracle10g on my pc running windows XP. I need to get the port number for JDBC drivers used by Java Application when defining a JDBC source.
Java is running on the same machine.
When I installed oracle I was given the links (with port numbers) for EM, ULTRA SEARCH and iSQLPLUS, what I need is the ORACLE10g database port number. Anybody know where I get from ?
Cheers

thanks for the reply the portlist does not contain the port of oracle. The file is below.
[i]Ultra Search HTTP port number =5620
Enterprise Manager Agent Port =
iSQL*Plus HTTP port number =5560
Enterprise Manager Console HTTP Port (oracle10) = 5500
Enterprise Manager Agent Port (oracle10) = 1830
However searching through some other threads found the port to be 1521, which
oracle must set during installation and tell anybody, unless this infor is in the log.
so configured the oracle JDBC driver as below (PE8.2 --> ConnectionPools)
Datasource Classname = oracle.jdbc.pool.OracleDataSource
URL = jdbc:oracle:thin:@localhost:1521:oracle10
User = abc
Password = abc
Now able to ping. Cheers

What port number for Desktop Sharing using in Lync Server 2013 and Lync Online

Dear All,
My environment using Lync Server 2013 and Lync online on Office 365. I don't want my user using Desktop Sharing feature. then I need to know what port number for Desktop Sharing using in Lync Server 2013 and Lync Online.
I will deny this port on personal firewall each client.
Thank you for your advise.

Hi,
I'm not sure you'd be able to do this with ports without impacting other application sharing features such as Q&A, Whiteboard, Poll etc - I'm pretty sure they all come under the same umbrella of ClientAppSharing.
Ordinarily you would create or modify your conferencing policy to restrict sharing to single programs only using a cmdlet similar to below;
Set-CsConferencingPolicy -Identity "Global" -EnableAppDesktopSharing SingleApplication
This would disable desktop sharing but enable users to continue sharing other single programs. If you want to remove that functionality too, then replace the 'SingleApplication' parameter with 'None'. Then users won't be able to share any programs either.
This is the correct way to do it as the icons will be greyed out for the users. Doing it your way, they would still be able to click them, and it would throw an error - this will lead to a lot more support calls and people assuming a service is broken.
I hope that helps some.
Kind regards
Ben

How do I change my number for iMessage and facetime

How do I change my number for iMessage and FaceTime on my iPad mini

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
 Cheers, Tom

Change of UID for Oracle user - Impact

If change of UID for Oracle user in solaris will affect the database which is already running. Wil it have any impact for the databases?
Guys please advise.
Thnx,
Satheesh

Many thanks for the response. We are not changing the UID but there are some errors in the script related to file permissions. So just wanted to know will it have any impact on the database if we change the UID.

Change port number for Oracle Microsoft Transaction Services - How????

Similar Messages

Maybe you are looking for