Change position of thumbnails in preview ?

I'm used to having the thumbnails of a pdf in preview display on the right-hand side of the window.
They're now on the left, and it's really throwing me!
Does anyone know if there's a setting or a tweak available which will move the preview sidebar back to the right side of the preview window?
Thanks.

Georgeonetwothree wrote:
it is part of a dreamweaver template
If it's part of a DW template then once you save the page all pages using that template should update automatically.

Similar Messages

Is it possible to exclude thumbnails and previews from a vault?

I think in Aperture 1.5, vaults did not include any preview or thumbnail files, but only the files containing metadata, adjustments etc. (and the masters, unless referenced only)
Somewhere along the way to 3.0 this changed so now previews and thumbnails are backed up each time you update your vault.
This has two BIG drawbacks:
- the vault becomes much larger than necessary (I always generate large previews)
- the update process takes much longer as more files need to be copied.
On the other hand, I do not see any tangible benefit of including the extra files - provided I back up both masters and the adjustments, I should be able to regenerate thumbnails and previews after a restore following, say, a fatal hard drive error.
(If I chose to delete all previews and thumbnails prior to creating a vault, I assume that the vault would be significantly smaller, without losing any information that cannot be recreated by 'generate thumbnail/preview')
Is my understanding correct?
If so, is there a way around it?
If not, can we please have this option in Aperture 3.5 or 4.0?
Thank you!

Hi Matt. You raise an interesting point. What you say makes sense to me.
My general response is: external drives are cheap. Buy what you need and don't spend any time trying to "save" disk space. IME, the administrative overhead is far more costly than the upfront equipment costs.
Here are some specific answers (as I understand how Apeture uses Vaults).
There is no way to exclude Previews from Vaults. Each Vault includes all extant Previews.
Each Vault is a differential back-up. Updating the Vault should update only those files that have been added, changed, or deleted. Unchanged files -- including Previews -- are not backed up anew each time you update a Vault. The amount of time it takes to update a Vault will vary based on the number of changes made, and should have nothing to do with the size of the Library or the number of files in it.
You can test your hypothesis. Delete all your Previews, and create a new Vault. Let us know what you find out.
Suggestions for enhancements should be made directly to Apple via "Aperture→Provide Aperture Feedback". The forum is -- officially -- strictly for user-to-user interaction.

DNG file types don't show thumbnails or previews

I am having trouble with Adobe Bridge CS5 for Mac OSX. Up until last week it was working fine. I haven't made any changes to my computer or my camera or anything like that. But now .DNG files won't show their thumbnail or preview. I only see the icon for the file type in the thumbnail list, and then when I click on the thumbnail, I just see a bigger version of the file type icon in the preview window. However, JPEGs show up just fine.
I've searched through this forum and tried:
- Resetting the Workspace
- Resetting Bridge to default (Opening it with the Option key pressed)
- Purging the cache
- Checking that Camera Raw is properly installed (I have 6.7)
- Updating DNG Converter to 8.3
But no luck yet. Is this a new issue or something?

What about your old DNG photos which used to display properly? Can you still see those okay?
Have you set the Compatibility preference in DNG Converter to Camera Raw 6.6 and later?
Can you confirm that you have only one copy of Camera Raw 6.7 installed, and no other versions in alternative File Formats folders?
You could also try ACR 6.7.1:
Mac http://www.adobe.com/support/downloads/detail.jsp?ftpID=5602
Windows http://www.adobe.com/support/downloads/detail.jsp?ftpID=5603

Images change position and dimension after client edits on admin console!

Hi,
1. After my client uploaded his images onto the site using the admin console they changed position slightly and did not fit exactually into the image frames i had set when i first made the site.
2. When i opened the site on muse and merged changes the images positions and dimensions changed even more than what was being diplayed on the live site? (E.g I originally had two columns of square thumbnails for some slideshows and now i have a single column of rectangle images)
3. I republished to see what would happen it now displays the way it was diplaying in Muse. The site is: www.jacobbuckland.co.uk
My understanding was that when i create an image frame or gallery in muse that any image uploaded via the admin console should fill that frame no matter what the size or dimensions of that image?
Any help gratfully received. Thanks

Our technical team managed to find the immediate cause for the problem, and a solution.
According to them there was a corruption on a speciffic OLAP file. By deleting it, they allowed it to be recreated on the next application processing. The file in question was found in \Microsoft SQL Server\MSSQL.2\OLAP\Data\UGF.0.db\<APPLICATION>.38.cub.xml
Where <APPLICATION> is the name of the problematic cube.
After that everything is working.

Not seeing thumbnails or preview images...

I recently upgraded with a new installation of CS5 on a new iMac 2.8 GHz Intel Core i5, 8 GB 1333 MHz DDR3 of memory. On my older, smaller, and slower iMac (about a 1 1/2 year older machine - do not have the specs handy) I was using Bridge CS4 without any issues what so ever and am familiar with using it, so I know that this is not normal. Bridge shows it is creating previews, but it sits there and sits there, working and working and nothing draws. This is getting frustrating as I have grown accustomed to using Bridge and its many wonderful features (over an old version of iView).
Does anyone know of any issues such as this? Is there a solution?
I have tried to dump the cache and that gets me no where. It sits on that, I have to opt, cmd, esc and force quit it. At that point I also see that Bridge is not responding. Also, I have not changed any preferences since the original install. I am running it default.

Okay, very weird. But I just tried to dump the cache again before making the original post and I had to force quit Bridge. Opened it up again after making the post and thumbnails and previews are flying up on the screen now.
Go figure! So I guess for now, problem solved.

Changing Position of Header Icons In a Theme

Hi
I am trying to change the position of the iView Menu
throw the theme editor -> iView's Trays -> Tray Header Icons -> Position of Header Icons
from right to left.
But my changes doesn't effect the preview or the portal display (after I save my changes).
I am working on EP6 SP12.
Any ideas will be excepted gladly.
Nitsan

Hi,
the styles are normally cached in the browser. You have to delete the cached content.
In the IExplorer menu choose "Extras" -> "Internet options" and delete the temporary content.
That could help.

Thumbnails and Previews have a green tinge

The thumbnails and previews in my library have suddenly developed a green tinge.
I have tried Update Previews, Generate Thumbnails, and Generate Previews with no success. I have also used Repair database and Rebuild database, again with no positive result.
I am at a loss to know what to do next.
Jerry

I have a similar issue, but it doesn't seem to affect all thumbnails.
Thumbnails have thos unprocessed raw look (bluish, greenish tint):
But they look fine once you open the real pictiure:
What could possibly cause this problem? I have re-generated prebviews and thumbnails but can't seem to solve the problem.

Bridge "stops working" and displays split thumbnails and previews.

When working with Windows XP, my Photoshop/Bridge CS3 was working fine. On my new computer with Vista, Bridge acts up in strange ways. It sometimes shuts down spontaneously, causing a Windows "Bridge has stopped working" message to appear.
At other times, Bridge displays thumbnails that are split or only half there, with the preview image also split in half with the sides reversed. If I wait a few minutes, the proper thumbnails and preview finally appear, but this is a nuisance. BTW, the same copy of Bridge works just fine on my laptop with XP. When I contacted Adobe, they blamed it on Windows. When I contacted Windows, they blamed it on Adobe. Anyone with similar problems and suggested fix?
Thanks!

Hi Gerry,
as it is nearly two months since your initial post, you may have already solved your problem. In which case I'll continue with this reply for the benefit of anyone else who suffers the same affliction:
My problem was Bridge CS3 running on a 32-bit Vista Home Premium SP1, Intel Core 2 CPU T5300 @ 1.73GHz and 2GB of RAM (if that makes any difference). Like Curt, I'm no computer expert either but I was experiencing a very similar problem to your's in CS3 Bridge.
The error message contained something about the "nvlddmkm.sys" not working. The 'nvlddmkm.sys' refers to the driver for my graphics card, a 'NVIDIA GeForce Go 7300', whose driver I had recently updated (to solve a separate conflict between an updated BIOS - it never stops!).
After some fiddling, I discovered that changing the 3D Graphics setting on the Nvidia Control Panel made Bridge once again behave.
Open the Nvidia Control Panel (right click on the 'desktop' to access it).
Under the '3D Settings' task, select 'Adjust Image Settings with Preview'. This should reveal a window with an image of a slowly spinning, three-dimensional Nvidia logo. (I understand that the Nvidia Control Panel is common to all its cards.)
Under the spinning logo image there are three options for 3D settings. On my computer, while my Bridge was broken, the "Use my preference emphasizing: Balanced" option was selected. I changed the option to, "Let the 3D application decide" and crikey! - when I restarted Bridge the previews were once again working. (It may be my imagination, but Bridge appears to now be going better than ever.)
I switched the Nividia preferences a couple of times just to make sure. The change appeared to have done the job.
NB: I noticed another discussion in the forums entitled "Suddenly No Images in Bridge" which appears to be a similar problem. They resolved it this way;
"Depress and hold Ctrl-Alt-Shift when you start PS or Bridge. A menu comes up with three options. Check them all."
I didn't see that fix until I had sorted mine so I haven't tried it... but now that 'it ain't broke', I 'ain't gonna fix it'!
Hope this helps you or someone else.

I have a mac air and an iMac and both have Pages. I use Pages on my air and save all documents to iCloud. I can see them on my iMac but it won't open with Pages. It becomes visible if I change it to open with preview but I can't interact with it.

I have an mac air and an iMac 5k - pages runs on both. I use pages on my air and save all my documents to iCloud drive. I can see the documents on my iMac but some won't open in pages which is bizarre? They will open if I change it to open with preview but then all I can do is read it - I can't add to the document - All I want is to be able to see all my documents on all my devices and to be able to have them sync so I can add to the documents from any of my devices. I also have an iPhone 6 and an iPadair2 but I would be happy just to have the iMac and macair sync for starters. I have folders within folders in my documents,. The folders which contain pdf's and individual files open OK . The one I am having difficulty with is the file which I use for ongoing correspondence - in other words it is quite long - I keep adding to it ( by copying letters in and letters out so I can see a sequential history of what has been going on by scrolling down ) in date order so that it could be 1 - 100 pages long - but I don't think the size is a problem. I don't understand why some folders can open and others not . Has anyone any suggestions please. I have been trying to get this to work for months since iCloud drive came in. It has got much better but it is still not good enough - or maybe it's me?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

How to change position for items in shopping cart

Hello,
I am creating shopping cart using flat file. But i am not able to change the position for items i.e. both items contain position as 0000000001.
Following are the item details of shopping cart which is created through portal. (from tcode BBP_PD)
Items:
Pos Type Quantity Unit Ordered_Prod Description Gross price
0000000001 1 EA keyboard 100,00
0000000002 1 EA CPU 1.000,00
Following are the item details of shopping cart which is created using flat file & BAPI BBP_PD_SC_CREATE.(from tcode BBP_PD)
Items:
Pos Type Quantity Unit Ordered_Prod Description Gross price
0000000001 1 EA MONITOR 1,00
0000000001 1 EA MONITOR 1,00
Position is not getting changed for item 2 & only first record is getting uploaded 2 times. My code is creating Shopping cart number .
Please tell me how to change position of each item.
Thanks & regards,
Edited by: Ketkee Bhale on Sep 14, 2011 3:58 PM

Moderator message - Cross post locked
Rob

[Bridge CC] Is there a way to see thumbnails and preview of WMF and EMF files?

I have a big archive full of technical illustrations, designed by me in the past, saved as EMF or WMF files, very good and lightweight to import in Word documents.
In the past, Adobe Bridge (CS3 at least) was able to show thumbnails and preview of such a file type.
Now it is impossible, for me, to search and retrieve, fast enough, old files.
Is there a way to let Bridge returns to show this files?

Hi Ram,
You can see the objects included in a transport request by going to se09 and opening your transport request and drill down to the task and below the task you would have all the objects that are included in the tranport. You can also use se03 to get the details by drilling down the tansport request.
The problem with importing the function module might be because either the function module or the function group may not be active which may cause the tranport to fail. please check if both are active or not.

How do I change the reading pane or preview pane from vertical to horizontal in Mail?

How do I change the reading pane or preview pane from vertical to horizontal in Mail?

From the Mail menu bar click Mail > Preferences then select the Viewing tab.
Select: Use classic layout

My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart. The icons all change positions, alphabetically. Just started happening. Any thoughts?

My hard drive desktop suddenly will no longer hold or maintain the icons in place when I shut down and restart. The icons all change positions, alphabetically. Just started happening. I prefer the icons to a list format. Concerned this might be a symptom of a larger problem. Any thoughts?
revmandan

It's normal for the icons at the top level of the startup disk to revert to the same arrangement every time the Finder is relaunched. If it's important to you to arrange those icons in a persistent way, proceed as follows.
Back up all data.
Open the Info window on the startup disk (labeled "Macintosh HD" unless you gave it another name.) Click the lock icon in the lower right corner of the dialog and authenticate.
In the Sharing & Permissions section, click the plus-sign button to add an entry to the access list. Give yourself "Read and Write" access. This will be a temporary change. Leave the dialog open.
Open the Finder window and arrange the icons as you wish, then close the window.
In the Info dialog, use the minus-sign button to delete the entry you just added to the access list. Don't change anything else. When you're done, it should be the same as when you started. Close the Info dialog.

Screen resolution changes after opening PDF in preview and is enlarged.

Screen resolution changes after opening PDF in Preview and is enlarged.

Do a backup.
Quit Preview.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Remove the following. You may not find them all.
Containers/com.apple.Preview
Preferences/com.apple.Preview.LSSharedFileList.plist
Preferences/com.apple.Preview.SandboxedPersistentURLs.LSSharedFileList.plist
Saved Application State/com.apple.Preview.savedState
Credit Linc Davis for this solution.

Change position of download completed notification

How I change position and set time to display of download completed notification box by PHP - JAVASCRIPT? or another firefox api to resolved this broblem.
Thanks!

Can you please share solution.

Change position of thumbnails in preview ?

Similar Messages

Maybe you are looking for