Change postal address

I would like to know how to change my postal address please... I can't do it on my account, there is just the option for e-mail address. Thank you

You will have to ring EE and speak to customer service then.

Similar Messages

  • Gconsync drops postal addresses with big Address Book changes?

    After many years of procrastinating, I've thrown a lot of contacts into my Address Book just in time to send Christmas cards.  I've configured Address Book to talk with Gmail, which causes gconsync to run once an hour. 
    I've observed that when I do large amounts of changes in Address Book, like a dozen or so in an hour, the postal addresses of random contacts get lost at the Google end.  Once this happens, efforts to fix the contacts one-by-one seem pointless.  I have to save/export my Mac Address Book, delete contacts at both ends, then reload from my backup to make things right.
    Anyone else seen this behavior? 

    Finally fixed it.  I am quite sure one of your address books is messed up.  To fix it:
    1. Figure out which address book is messed up.  I have three, iPhone, iPad, iMac. Shut off iCloud on one of them and try address book updates on the other two.  When the problem disappears, you will know which address book is messed up.
    2. Next fix the address book on the errant device.  I did it by restoring, WITHOUT using a backup.  Can't use a backup because the same error will be there.  This is a pain because you need to reorganize your aps, logins etc.  So, you might want to try shutting off iCloud and removing the address book from the device.  Then turn iCloud back on.  It will load a new address book.  I don't know if this will fix the problem. Might be hidden files that have the problem.
    3. This, by the way, also caused a huge power drain for me.  You can tell if you have the same problem by opening address book and checking if it is continually trying to sync.
    Bob
    [email protected]

  • Change registered address of Skype Business accoun...

    I need to update the registered (postal, not email) address of my Skype Business account.
    The Skype Business control panel webpage says that to do this I must contact Customer Support. (Crazy, why??)
    The contact page only offers these Community forums, and Chat (which "is presently experiencing problems" and is not available).
    xxxxxxxxxxxxxxxxxxxxxxxx

    11/26/2014 SKYPE TEXT-CHAT SUPPORT LIVE:
    info: at 23:33:34
    Please wait for an agent to respond. You are currently '2' in the queue.
    info: at 23:35:34
    All agents are currently assisting others. Thank you for your patience. An agent will be with you shortly. You are currently '2' in the queue.
    info: at 23:37:34
    All agents are currently assisting others. Thank you for your patience. An agent will be with you shortly. You are currently '1' in the queue.
    info: at 23:37:53
    Privacy Statement
    You are now chatting with 'Che-Khov M'.
    Kent: at 23:38:02
    Hello Skype Support!
    Che-Khov M: at 23:38:15
    Hello! My name is Che-Khov. Welcome to Skype Live Support! If incase we got disconnected, simply click on the Chat Support Link and you will be reconnected to us in no time. https://support.skype.com/support_selection .
    Che-Khov M: at 23:38:15
    With that being said, how may I help you How can I help you today?
    Che-Khov M: at 23:38:29
    Hi.
    Che-Khov M: at 23:38:30
    How can I help?
    Kent: at 23:38:44
    I would like to know the process for changing my billing address in My Skype Manager?
    Kent: at 23:39:13
    I see from the following link this can be done without customer support?
    Kent: at 23:39:15
    https://support.skype.com/en/faq/FA10975/how-do-i-​change-my-account-details-in-skype-manager
    Kent: at 23:39:38
    Please review the following thread as well about this issue: http://community.skype.com/t5/Using-Skype-in-your-​business/Change-registered-address-of-Skype-Busine​...
    Che-Khov M: at 23:39:42
    Are you located in United States?
    Kent: at 23:39:45
    Yes sir!!
    Kent: at 23:40:10
    I don't wish to change the billing address at this time. Just want full details how the process goes and if I am able to do this myself
    Che-Khov M: at 23:40:48
    Kent let me have first your user ID/account to check.
    Kent: at 23:40:58
    Ok. One second please.
    Che-Khov M: at 23:41:19
    Sure.
    Kent: at 23:41:20
    Mind you this will not require any change but as question basis only
    Che-Khov M: at 23:42:38
    Yes I understand Kent.
    Che-Khov M: at 23:42:38
    I just want to have reference before I answer your question.
    Che-Khov M: at 23:43:40
    I'm sorry.
    Che-Khov M: at 23:43:40
    I need your account name.
    Che-Khov M: at 23:43:40
    Not a link.
    Che-Khov M: at 23:44:41
    Please allow me to validate your account information for 3-5 minutes.
    Che-Khov M: at 23:44:41
    I appreciate your patience.
    Kent: at 23:46:32
    Che-Khov M: There have been many people saying negative things about the process and feature and even that the Chat Support was down. I wanted to verify as the same.
    Kent: at 23:46:40
    I see Chat is active
    Che-Khov M: at 23:47:10
    Oh I see.
    Kent: at 23:47:29
    I wanted to make sure plus clarify
    Che-Khov M: at 23:47:50
    Alright.
    Kent: at 23:47:50
    I'm an active member of Skype Community under the "Using Skype For Business" section
    Kent: at 23:48:10
    So this is exciting for me
    Kent: at 23:48:31
    I'm ready for your analyze and instruction
    Che-Khov M: at 23:49:57
    Well for this case Kent if you already verified your business account you can't be able to change anymore your business address.
    Kent: at 23:50:05
    EXCELLENT!
    Che-Khov M: at 23:50:15
    You need to create a new business account in order for you to change it.
    Che-Khov M: at 23:50:24
    Since you are located in USA.
    Kent: at 23:50:23
    If I didn't verify?
    Kent: at 23:50:35
    What would the process be?
    Kent: at 23:50:45
    Lets say a second business in USA
    Kent: at 23:50:50
    unverified
    Kent: at 23:51:12
    Forgive the question I need to clarify
    HERE I EXPERIENCE TECHNICAL DIFFICULTIES BUT STILL GOT ANOTHER AGENT:
    Austine M : at 0:04:15
    you said your Skype manager is not verified yet, right?
    Kent: at 0:04:19
    it is.
    Kent: at 0:04:32
    I want to know if I registered another business account unverified
    Austine M : at 0:04:42
    If you were not yet verifiedm then you will be able to change it
    Austine M : at 0:04:57
    You will be able to Kent
    Kent: at 0:05:00
    I see
    Kent: at 0:05:11
    Thank you very much
    Austine M : at 0:05:24
    Yes.
    Austine M : at 0:05:34
    But once you are verified then you need to be unverified first before you change it.
    Conclusion: The feature works but I'm verified  
    and chat support is up/working. 11/26/2014 
    I did this so others would see how to go about doing this if you needed to.
    Thanks,
    Kent C.

  • Does the 8310 display full postal addresses?

    Hello, I have just synchronized my blackberry 8310 with the desktop manager. It has imported all of my contacts onto my phone however, I can not get the phone to display the entire postal address for my contact....it will only display the city and postcode. Is there a way to change the settings to display this?

    did you try to fill in the address manually ?
    I have many fields for the Home address :
    - Address 1
    - Address 2
    - City
    - State/Prov.
    - Zip/Postal Code
    - Country
    if it works that way, it means you have to set up the synchronization betweeb your WAB (Windows Address Book) and the Blackberry. There's a screen in your Blackberry Desktop Manager to tell which field in the WAB goes to which field in the Blackberry contact.
    The search box on top-right of this page is your true friend, and the public Knowledge Base too:

  • Postal address listed in reverse order

    My postal addresses in my adress book are now in reverse order, in other words listed zip first, state, city, street?
    It only changed on my iphone? My Mac is fine, my iPad too. Any ideas?
    Bobby

    Check Settings>General>International>Region Format and make sure that it's set to your location.

  • IW52 Tracking change in address  Extras-- Address

    Hi All,,
    I am working on the Notifications. tcode IW52, In the Main menu --> Extras --> Address, whenever there is any change in the street, city, postal code I need to trigger a BADI. how can I track if there is change in address, and is there a way I can have both old and new values..
    I have been to CDPOS AND CDHDR but could not find that information .
    Please help.
    Thanks-
    Shrikant

    Hi Shrikant
    You need not even go to the CDHDR and CDPOS. to track address change.
    Open the Include program LSZA1I02. this is where the address is getting updated in the ADRC table.
    Create an enhancement point and write the following code.
    Below is the code.
    ENHANCEMENT 2  YIE_MWF_ADDR_CHANGE.    "active version
    *This is added by Shrikant Rajupalepu to track the address change.
    *If there is an additional space or change in the case,, then it should not track
    *the changes.
    *Removing additional spaces for the comparision.
    CONDENSE addr1_data-name1.
    CONDENSE addr1_data_old-name1.
    CONDENSE addr1_data-street.
    CONDENSE addr1_data_old-street.
    CONDENSE addr1_data-city1.
    CONDENSE addr1_data_old-city1.
    CONDENSE addr1_data-post_code1.
    CONDENSE addr1_data_old-post_code1.
    *Conversion of text in to upper case for the comparision.
    TRANSLATE addr1_data-name1 TO UPPER CASE.
    TRANSLATE addr1_data_old-name1 TO UPPER CASE.
    TRANSLATE addr1_data-street TO UPPER CASE.
    TRANSLATE addr1_data_old-street TO UPPER CASE.
    TRANSLATE addr1_data-city1 TO UPPER CASE.
    TRANSLATE addr1_data_old-city1 TO UPPER CASE.
    TRANSLATE addr1_data-post_code1 TO UPPER CASE.
    TRANSLATE addr1_data_old-post_code1 TO UPPER CASE.
    *comparision of the name
      if addr1_data-name1 NE addr1_data_old-name1.
        message i000(ZI_MOBILE) with 'Name:' addr1_data-name1 'has been changed'.
      endif.
    *comparision of the street
      if addr1_data-street NE addr1_data_old-street.
        message i000(ZI_MOBILE) with 'Street:' addr1_data-street  'has been changed'.
      endif.
    *comparision of the city.
      if addr1_data-city1 NE addr1_data_old-city1.
        message i000(ZI_MOBILE) with 'City:' addr1_data-city1 'has been changed'.
      endif.
    *comparision of the postal code.
      if addr1_data-post_code1 NE addr1_data_old-post_code1.
        message i000(ZI_MOBILE) with 'Postal code: 'addr1_data-post_code1 'Changed'.
      endif.
    ENDENHANCEMENT.
    Thanks-
    Rahul

  • Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him mine. Want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address.

    Help! I have a new iPhone 5s. My husband just lost his 4s, so I want to give him my 4s. We want to use same Apple ID so we both have access to itunes/apps purchases. Want to separate contacts, messages, mail, etc. I cannot change iCloud address on 4s iPhone. Also, when I tried to change iMessage I got a message that if I deleted my id (which seemed to be the only way to get my husband's I'd there), I would not be able to receive iMessages on any device.
    Would someone kindly tell me how to set up th 4s for my husband so that we can keep our info separate? It would be most appreciated! Thanks!!

    Hey Fagen!
    You will want to see the following article for guidance on achieving the result you wish to achieve:
    What to do before selling or giving away your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/ht5661
    I would just follow the instructions from this article to give your unused 4s to your spouse. Since you have already started using your 5s, you will still be receiving iMessages on that phone and will have no need to receive them on a device that has been replaced. Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

  • AddressBook - Is there a way to change multiple addresses at the same time?

    To be clear....I have 25 contacts at 1 company and that company moved.
    Is there a way to link the cards together so that when I change the address on one card it automatically updates the other 24 cards?? Rather than having to change each contact individually, which is time consuming and annoying.
    I have created a "Smart Group" for the company and all of the contacts place themselves in the group but it still won't sync the addresses.
    Can someone tell me how to do this, if it's even possible? And if it's not, I really wish it was!!
    Thanks!

    Open your Photos App > Camera Roll > At the top right corner you will see a rectangle with a right arrow, select that. Now you can select as many photos as you want and you can hit the red Delete button on the bottom right.

  • My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

    My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
    Ipad will connect no problem to other networks.

    First thing you need I think is to get your iMac connected to the Internet.
    Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
    After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
    If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

  • Is there a way to change the addresses used in an existing iMessage thread?

    This is kind of a multi-part question. Let me describe my scenario.
    I have many iMessage threads with other iPhone users where the "reply" addresses for one or both ends are the phone *numbers* instead of AppleID email addresses. (This could be due to a number of factors... either they had their "Start new conversations from" address set to their phone number, and/or they started a new conversation with me sending it to my phone number. How it *got* that way doesn't really matter). I want to be able to change the addresses of the conversation to AppleID's (so that I'll still get messages when I change SIM cards, among other reasons).
    With iOS 8's new ability to add/remove people from conversations, I thought I would be able to add the AppleID address and remove the phone number address, but there are two problems with that: 1) iOS 8 seems to only allow this for conversations which began as multi-person conversations, and 2) it doesn't seem to want to let you add addresses for people who are already recipients via another address (in other words, if Alice is already on the conversation via her phone number, I can't add her AppleID to the conversation). I guess I could remove the person first, and then re-add them with the other address... but I'd feel safer if I could add the next one before removing the first one.
    I know I could just tell the other person to delete our thread and start a new one, but I don't want to lose all of our dialogue and pictures (and I don't want to have to manually save it).
    So, the questions:
    Is there a way to change the address my counterparty is sending to when they make further replies to our conversation?
    Is there a way to change the address I send to when I make further replies to the conversation?
    Is there a way to change the default address to use when trying to send someone an iMessage? (What I'm after here is a way to craft my "contact" entry in people's phones so that, when they try to send a message to me and start typing my name, my preferred address comes up on top).
    As it looks like the only way to do this might be to use iOS 8's method of adding/removing recipients, is there a way of converting a two-person conversation into a multi-person one?

    I think I may have solved it, actually.  I find that if I switch the timecode to NDF in the source viewer, it seems to work.  I have tried it on three clips and they have sync'd without problems.  Hopefully this will continue to be the case.

  • How can I change email address RIM sends mail to?

    I have two emails, one that's strictly friends and family, and one for everything else. A while back I changed the "everything else" address to gmail. Although I've never submitted my personal address to RIM (other than setting up that email on my phone), they've begun spamming my personal mail with daily "notifications." I don't mind getting the mail, but 1. I don't want it coming to my personal address, and 2. I find it very disturbing that RIM harvested my personal account info to use at their convenience. I see in the emails I receive I can "unsubscribe," although they'll still send me mail they deem important. I don't want that, I want to give them my new everything address, so they'll stay out of my personal acct. I have thoroughly searched their site, but see no way to submit this new address, or to set up my acct preferences for my interaction with RIM. Please tell me how to change my address with RIM, or to at least contact them, not about my phone, but about their service (there doesn't appear to be any such option among the "Contact Us" selections they offer). Thanks very much!

    Notifications of what?
    I promise you, from all I've seen, you would have had to check a box in something stating you want to receive updates, etc., from BlackBerry. They certainly haven't "harvested" your email address from simply being loaded to your BlackBerry.
    You need to unsuscribe from the current emails you're getting. Even if you don't want to.
    You probably downloaded an OS or file update or Desktop Software somewhere that you clicked to agree to receive updates.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • How can I modify an incorrect mailing address on my AppleCare Protection Plan certificate? After I registered a new product with AppleCare I realised that I'd entered the wrong postal address and I need to update it to show my correct address.

    I need to modify an incorrect mailing address on my AppleCare Protection Plan certificate. After I registered a new product with AppleCare I realised that I'd entered the wrong postal address during the registration process and now I need to update my details to show my correct address. I've been trying for several hours to find a way to modify my address on the AppleCare site, with no success. Any help/advice would be greatly appreciated!

    Contacting Apple World Wide for Support and Service
    http://support.apple.com/kb/HE57
    Apple Contact USA
    http://www.apple.com/contact/

  • Can't change MAC address of my wireless card on Windows XP

    Dear Forum Members,
    I have recently bought a notebook, Lenovo IdeaPad G550L (I haven't found section for the G series here on the forum) and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly changed MAC address. I installed the recommended driver, available from Lenovo's website, version 5.10.38.14. I tried the common way to change the MAC address, went to Control Panel -> Network Interfaces -> Broadcom Wireless Network Adapter -> Configure... -> Advanced -> Locally administered MAC address, and changed it to a different address (without ":" or any separator characters). Unfortunately this common solution won't work at all. Although, no error messages are produced when changing it (so it seems successful) my wireless router shows me the original MAC address of my integrated wifi card. Tried to restart my computer, my router, everything.
    * Tried different drivers, downloaded a driver from HP which had a separate wireless configurator, Broadcom Wireless Utility. It worked like the driver from Lenovo (except this one hasn't got the utility), but I was still unable to change my MAC address.
    * Tried a different driver from SoftPedia, version 5.10.79.14 (this is newer than Lenovo's), it didn't work either.
    * Tried Nathan True's MACShift utility. It seemed to change the MAC address, but my router showed the original, so it didn't.
    * Tried to look for official Broadcom drivers on www.broadcom.com but found nothing for BCM4310.
    * Finally, I booted my alternative OS, the latest Ubuntu Linux, and used the kernel driver b43 for my wireless adapter. I tried to change my MAC address using the command ifconfig wlan0 hw ether .... and connected to my network. It worked, my router showed the changed MAC so the hardware (or the firmware) is capable of doing this by the right driver/firmware.
    I tried to address Broadcom with the issue, sent them a letter like this post they replied that they are not competent, they wrote the following (I guess this was an automatically generated message because it got back in 10 seconds ) from [email protected]:
    "As the chipset supplier, Broadcom provides driver support to our customers - the manufacturers of wireless devices - that ultimately provide products to end customers, such as wireless LAN vendors, cable modem vendors, and notebook providers. It is up to these manufacturers to provide product-specific drivers and software support to their end customers. Please contact the manufacturer of your wireless device for their current drivers"
    Then I addressed Lenovo with the problem, their answer:
    "Dear ******,
    Thank you for contacting Lenovo, the makers of ThinkPad and ThinkCentre products. As I understand, you have purchased a Lenovo IdeaPad G550L and would like to use its WiFi adapter (BCM4310 according to Everest) with explicitly change MAC address.and you would like to know is there an official driver for Windows XP that allows you this basic feature like b43 in Linux. We apologize,Please do speak with our Idea pad technical Team at 877-453-6686 Option 1-2-1-2 for further assistance.
    If you have further questions or concerns, please feel free to contact us at 866-42-THINK (84465) option number 2. We will be happy to assist at that time.
    Once again, thank you for contacting Lenovo.
    Sincerely,
    Lenovo Websales/CustServe"
    So this means I should call them and spend extra money for phone bill of international calls because of their fault of providing a basic feature that is to be expected from every single wireless card in the market. Should I believe that a guide over the phone is more efficient than a step-by-step solution or a link to an alternative driver? I'm getting kind of disappointed. At least they have understood (or copy-pasted) my problem, dutch comfort though.
    Any ideas? Anyone experienced the same problem and solved it? Is there an official (or even unofficial) driver for this device for Windows XP that allows me this basic feature (like b43 in Linux)?
    Thanks in advance,
    str4ngS

    Yes, I have posted this thread to different forums after I realized that Lenovo "customer care" is not likely to help me out and even wirelessforums.org members couldn't come up with any ideas for days, that's why. I have already written that helper applications like SMAC (or etherchange or macshift) don't work, because they do the same thing in the system as I change it in the driver panel, so they use the same method which simply does not work.
    Locked? Definitely not. If yes, why can I change the MAC of my adapter under Ubuntu Linux using b43 open-source driver if it's really locked? Or you mean it's locked from software, because Lenovo or Broadcom didn't want their users to change their MACs or they just forgot to release a fully-functional driver? Well, then I would like to have a driver in which it's not locked, because this is a basic feature of my adapter of which the hardware is capable.
    I have already contacted Broadcom, see their (automatically-generated) answer in my initial post, but I will try to do that again with more foresight.

  • How to change email address in my jdc profile

    I want to change email address in my profile. Can anyone tell me how to do it?

    http://forum.java.sun.com/thread.jsp?forum=31&thread=299784

  • HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    HI, i bought my i touch 4th gen from the philippines, and i transferred here in the US. i would like to purchase an application here in the US but i wont allow me to. and i have been trying to change my address and country but it wont let me too.

    What happens when you change your address in your iTunes account? You also have to have a payment method associated with the USA, For example gift cards are restricted to the country of their purchase.

Maybe you are looking for

  • How do I view other's tweets after updating to iOS 5?

    HELP! I just downloaded the new iOS 5 with integrated Twitter but I don't know how to veiw other's tweets that I am following! Please help!

  • Mozilla Firefox plugin-container has stopped working properly

    Mozilla Firefox plugin-container has stopped working properly. FOR THE UMPTEENTH DAMN TIME... HOW DO I FIX THIS on Firefox 3.6.13!?!?!?!?!?!?!? ''edited by a moderator - https://support.mozilla.com/en-US/kb/Forum+and+chat+rules+and+guidelines ''

  • Sansa Fuze MP3 Compatibility In Tiger vs. Leopard

    Greetings! Don't flame me for not going iPod but I have my valid reasons. In any case, I have a Sansa Fuze that refuses to come up on my desktop or in Volumes, though when plugged in it shows up in the System Profiler. I have trawled the Sansa forums

  • Wifi connectH

    Hi gang, I'm wondering if someone  can help me with my commando droid. I cant seem to connect with my home wifi. I;m not sure how i disconnected from it but it wont accept my password. Any help would be greatly appreciatted

  • Is it possible that the trashcan can empty itself, automatically?

    I am missing a Pages file. Can't find it in my Dropbox, hard drive or in iCloud. Sadly, I do not have a backup for my dropbox. Since I almost never delete Pages files, I probably never saved it at all. And since Pages cannot find it and open it as a