"change" pre-release beta button unreachable (Italian Yosemite)

As you can see in the image below the "Change" button in the Italian version of Yosemite OS is impossible to click because of the long italian translation. I want to disable beta pre-release and I can't.
Please help or if anyone know a different command to avoid this problem.
Thanks

Temporarily change the system language to English.

Similar Messages

Looking for 64 bit version of firefox, pre-release or Beta ok

I have Win7 Pro 64bit. Was having issues with continuous crashing of flash. I installed Adobe Flash Square version10 64bit with Firefox version4, reduced # of flash crashes.
When firefox pushed out version 5, I installed it & the browser kept dragging/crashing all over again. looked up Adobe Flash Square to see if any info avail, Adobe had Adobe Flash Square version11 64bit, so I uninstalled version 10 prior to installing version11 per Adobe instructions. Although it has helped, it is not where it was prior to installing Firefox 5.
I have tested Firefox 5 with the current Adobe Flash 32bit release as well, and what can I say, it's not work the effort on my 64bit system. for some reason this combo maxes out my cpu (2.8 dual core) & memory (4 gb + virtual), causing me to hard boot my system.
I understand Firefox devs are working on a 64bit version for Windows. I would like to volunteer to test it. I have many years of SW design & QA experience so any bugs I find I will fully document.
The 64bit version of IE works well with the 64bit Flash, lots better than 32bit version, but I prefer to use Firefox or Chrome (I often utilize both simultaneously, each on own screen).
Please let me know if a 64bit version of Firefox is available (pre-release/beta ok) & if it is not is there an expected availability date?
Thank you in advance,
Verta Tannehill

Nightly is a pre-release testing version of Firefox: bleeding edge and not necessarily stable. It is Firefox -- a rose by any other name, and all -- but it is buggy, as all testing software is (I'm using it right now). New Firefox versions are born from Nightly, so when a 64-bit version of Firefox is released, it will have come from Nightly development. Use it for general browsing and send feedback (Tools -> Options -> Advanced -> General) and you will be helping to beta test a new baby Firefox.

I need to create buttons in which the color changes, and stays on after you release the button

I need to create buttons in which the color changes, and stays on after you release the button. The hard part is the buttons must change independently of each other.
To get an idea of some of things I’ve tried I’ve tried making the movie with two frames.
When I click the button it switched to the new frame which would show a movie clip,
Unfortunately all buttons would change color together and don’t see how to make it so that they change independently.

you must use movieclip buttons and code for their frame changes.

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version.

I get a message that says "This version of pre-release ios will expire in 7 days" What should I do? I am currently running ios 8 GM and I can't update to the public release version. I am stuck in the beta. Itunes will not let me restore my iphone or update it. PLZ HELP ME

Wondering if you have a current Backup on iTunes ...if yes you could put the iPhone in DFU Mode by holding the Home button while you plug in the lightning cable. Then you could Restore the iPhone to Factory Settings on 8.0.2 and after a full Restore go back and then Restore from your Backup. This happens every time a public release occurs. Many folks on the Golden Master or otherwise in the AppleSeed program with a Beta version for some reason don't move to the official release ...then the software time-bomb hits and they can't upgrade.

Sp9 / pre-release / problem with jsp tags

 WLS 5.1, sp9 pre-release, solaris 2.7, WLCS 3.2
 JSP compile fails with the exception...
 weblogic.servlet.jsp.JspException: (line -1): Error in tag library
 at: 'wl':
 The Tag class 'weblogicx.jsp.tags.CacheTag' has no setter method
 corresponding to
 TLD declared attribute 'async', (JSP 1.1 spec, 5.4.1)
 at weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
 at weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:264)
 at weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
 at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
 at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:95)
 at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3873)
 at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3623)
 at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3484)
 at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1817)
 at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1658)
 at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1548)
 at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:888)
 at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
 at weblogic.servlet.jsp.JspParser.parse(JspParser.java:125)
 at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:109)
 at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242


 It could just be me - I an un-jarred a version of weblogic-tags-510.jar where WLS
 could find it.
 mike
 Kumar Allamraju <[email protected]> wrote:
 >Yes, my JSP is referring the tag libs. I 'm using counter example given
 >in
 >examples/jsp/tagext/counter directory
 >
 ><NT Performance Pack> NATIVE: created IoCompletionPort successfully.
 >I
 >oPort=0x000001d4
 >Sun Apr 01 12:44:00 PDT 2001: <WebLogicServer> WebLogic Server star
 >ted
 >Sun Apr 01 12:44:40 PDT 2001: <NT Performance Pack> Allocating: '2'
 > NT reader threads
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: init
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > verbose initialized to: true
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > packagePrefix initialized to: jsp_servlet
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > compileCommand initialized to: c:/java/java122/bin/javac.exe
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > srcCompiler initialized to weblogic.jspc
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > superclass initialized to null
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > workingDir initialized to: D:\releases\510\myserver\classfiles
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: param
 > pageCheckSeconds initialized to: 1
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: Using
 > Encoding : ISO-8859-1 when constructing PrintWriter instead of Servle
 >tOutputStream
 >Sun Apr 01 12:44:41 PDT 2001: <ServletContext-General> *.jsp: initi
 >alization complete
 >Sun Apr 01 12:44:42 PDT 2001: <ServletContext-General> looking for
 >taglib uri /counter.tld as resource /WEB-INF/counter.tld in Web Applic
 >ation root:
 >Sun Apr 01 12:44:43 PDT 2001: <ServletContext-General> Generated ja
 >va file: D:\releases\510\myserver\classfiles\jsp_servlet\_pagehits.jav
 >a
 >Sun Apr 01 12:44:45 PDT 2001: <ServletContext-General> file: init
 >
 >
 >what's the change number you get from weblogic.Admin VERSION?
 >
 >
 >--
 >Kumar
 >
 >Mike Reiche wrote:
 >
 >> From the zip file.
 >>
 >> It has to be a jsp that references those tag libraries.
 >> Other than that it works like a charm.
 >>
 >> Mike
 >>
 >> Kumar Allamraju <[email protected]> wrote:
 >> >Did you extracted the SP9 zip or exe?
 >> >I do not see the following errors when accessing a jsp with SP9? Could
 >> >you tell us how to
 >> >reproduce it?
 >> >
 >> >BTW, i will ask our docs folks to correct the startup scripts..
 >> >
 >> >--
 >> >Kumar
 >> >
 >> >Mike Reiche wrote:
 >> >
 >> >> I had to remove the 'async' attribute from taglib.tld
 >> >>
 >> >> And when I use WLCS I have to remove it from weblogic.tld
 >> >>
 >> >> And the startup scripts provided do not include weblogic-tags-510.jar
 >> >> in the classpath.
 >> >>
 >> >> Mike
 >> >>
 >> >> "Mike Reiche" <[email protected]> wrote:
 >> >> >
 >> >> >WLS 5.1, sp9 pre-release, solaris 2.7, WLCS 3.2
 >> >> >
 >> >> >JSP compile fails with the exception...
 >> >> >
 >> >> >weblogic.servlet.jsp.JspException: (line -1): Error in
 >> >> >tag library
 >> >> >at: 'wl':
 >> >> >The Tag class 'weblogicx.jsp.tags.CacheTag' has no setter
 >> >> >method
 >> >> > corresponding to
 >> >> >TLD declared attribute 'async', (JSP 1.1 spec, 5.4.1)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.jspException(StandardTagLib.java:138)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.processTag(StandardTagLib.java:264)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.processTagElements(StandardTagLib.java:146)
 >> >> > at weblogic.servlet.jsp.StandardTagLib.<init>(StandardTagLib.java:125)
 >> >> > at weblogic.servlet.jsp.JspLexer.loadTagLib(JspLexer.java:95)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE_BODY(JspLexer.java:3873)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTAGLIB_DIRECTIVE(JspLexer.java:3623)
 >> >> > at weblogic.servlet.jsp.JspLexer.mDIRECTIVE(JspLexer.java:3484)
 >> >> > at weblogic.servlet.jsp.JspLexer.mSTANDARD_THING(JspLexer.java:1817)
 >> >> > at weblogic.servlet.jsp.JspLexer.mTOKEN(JspLexer.java:1658)
 >> >> > at weblogic.servlet.jsp.JspLexer.nextToken(JspLexer.java:1548)
 >> >> > at weblogic.servlet.jsp.JspLexer.parse(JspLexer.java:888)
 >> >> > at weblogic.servlet.jsp.JspParser.doit(JspParser.java:69)
 >> >> > at weblogic.servlet.jsp.JspParser.parse(JspParser.java:125)
 >> >> > at weblogic.servlet.jsp.Jsp2Java.outputs(Jsp2Java.java:109)
 >> >> > at weblogic.utils.compiler.CodeGenerator.generate(CodeGenerator.java:242
 >> >
 >

Assistance in converting Pre-release files

I have 3 InDesign CS4 files that were created for demo purpose on the pre-release version. I've used the converter to re-use these files in the real InDesign CS4 but an error kept showing that I can't convert them.
Can some one with the pre-release copy on their machine assist in opening these 3 files then save them as .inx?

Bryon,
Nobody "somehow" gets beta software off of a web site without a LOT of hard work.
Where did you get it?
Where did the serial number come from?
You must have some record of that information.
The reason no one here can help you is that this sort of thing happens after every release of the new software.
People who have "somehow" been using the beta software suddenly find out that their old files won't open any more.
If they got the beta through legitimate means, there is always someone who can help.
But all of us have seen too many people with the most inventive stories trying to get beta files converted.
You'd be amazed at how involved those stories can be.
But your story is a first. I've never heard of someone who can't remember how the software appeared on his machine.
I'm impressed.
Now go back and figure out where you get it from and contact that person.

Alchemy 2 release date and the pre-release

Hi,
All has gone quiet about Alchemy 2 .. what is happening? ... is there any kind of release date yet?
I want to convert my new game to IOS with stage3d, totally stuck until there is an Alchemy 2 version of Box2d Alchemy.
And speaking of Box2d Alchemy (also WCK) The creator of the port Jesse Sternberg (known as mayobutter) has tried to get in the pre-release program and failed.
http://box2d.org/forum/viewtopic.php?f=19&t=7877&start=20
For the good of the community he should be one of the first on the list!

We've just released a beta version, join the pre-release and try it out: http://gaming.adobe.com/technologies/flascc/

Detail changes for release creation on schedule aggreements

Hi Experts,
Landscape:
-we have a standard ERP 6.0 system with an external EDI converter
-IDoc data exchange via RFC connection
-IDoc SAP standard (without modifications or add ons): message type: DELINS, basic type: DELFOR01
If we create a release on a schedule aggrement, all schedule lines in forecast comes out as expected.
When we delete some schedule lines, these lines exported to IDoc with quantity 0 and have an aggregation per week. So we have the following structure in IDoc:
E1EDK09 (head data)
|-E1EDP10 (pos data)
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 0
      |-E1EDP16 (schedule line): aggregation per day (IDoc field PRGRS = ' '), quantity 10
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 200
      |-E1EDP16 (schedule line): aggregation per week (IDoc field PRGRS = W), quantity 200
      |-E1EDP16 (schedule line): aggregation per month (IDoc field PRGRS = M), quantity 9000
So far so good. This looks fine.
But our standard EDI converter expect the IDoc data starting with days, weeks, months aggregation. If the first schedule line with aggregation weeks are send, the converter expect all other schedule lines with aggregation per week or per month.
It is possible to change the release creation in the IDoc without coding in User-Exits, just with customizing?
regards,
Steffen
Edited by: Steffen Froehlich on May 3, 2010 1:31 PM (accidentally clicked on Post than Save button)

Hi,
   Go to MN04 transaction and maintain the "Date/Time" as 3 for the specific output type condition record as shown below:
   Test the scenario again with a new PO. Now, system wont generate the spool immediately after release and save in ME29N and the output will be "in process" mode (yellow signal). You can process the output in ME9F transaction to display and print.
Regards,
AKPT

SAP Business One Forum news... - Pre-release of 2005A SP01 for testing

Pre-Release of SAP Business One 2005A SP01 available for SAP partners for testing purposes (only!):
April, 21st: Please note that the SAP Note No. 931019 about "Known issues" regarding SP01 has been updated and has been released.
Please checkout this article about changes, limitations, how to give feedback etc - published in the SAP Business One Developer Area here on SDN!
Here's the direct link to the article:
https://www.sdn.sap.com/irj/sdn/developerareas/businessone?rid=/webcontent/uuid/f3169a1c-0a01-0010-4ebd-abd65b029c71 [original link is broken]
FYI:
- Please note that the 2005A SP01 SDK package includes the SDK samples in C# as well!
- Please note that currently a survey regarding partner feedback on SAP Business One documentation is done in the "SAP Business One Forum" area on Channel Partner Solution Network:
http://cpsn-channel.sap.com/businessoneforum
TechSummit05 TechSummit05 TechSummit05 TechSummit05 TechSummit05
Presntations, Jam Sessions and more...
Go here:
TechSummit 2005 presentations
SDK (basic) E-learning available on SMP and as download package:
SDK (basic!) E-learning avail. on SAP Service Marketpl.(SMP) + as download
Good to remember or know as well:
There's a forum about the new "SAP Business One Integration ...":
Busines One Integration Technology (B1i) forum!!!!
...and (for SAP partners only) there's a forum where you can discuss implementation / sales / ... questions etc.:
Got a question about customization / implementation? Maybe ask it in CPSN!
...and here's the SAP Business One Forum in the "SAP Community" (public to anybody):
Re: Got a question about customization / implementation? Maybe ask it in CPSN!
The "Solution Overview" area in the SMB Portal on SAP Servicemarketplace now provides information on available documents in alphabetical order:
http://service.sap.com/~form/sapnet?_SCENARIO=01100035870000000183&_SHORTKEY=01100035870000654575&_ADDINC=&
Here's a comprehensive post about the SDN "Rules of Engagement":
/thread/117232 [original link is broken]
Forum search tips:
Forum Search Tips
... and last but not least:
Don't forget to check the latest news in the SAP Business One Developer Area:
http://www.sdn.sap.com/irj/sdn/developerareas/businessone
Message was edited by: Frank Moebius

Hi Cristian,
As peter mentioned, Please refer to SDK Online Help=>Content=>Degeloper Guide=>DI Server
In addition, you can the sample code of DI Server here:
<<...
SAPSAP Business One SDKSamplesDI Server>>
As regard to php sample, sorry we don't such sample so far.
Per php, I recommend you to B1WS, a web service wrapper of DI Server for only those 45 services objects. You can download B1WS here: SDK Tools Download:
SAP Business One Tools [original link is broken]
=>SAP Business One Web Services Wrapper Tool
From technical perspective, DI Server is based DCOM technology, I am not sure it is natively supported php. So you may think about wrapping DI server as web server with ASP.net, just like B1WS. php<=>web server<=>DI server
Kind Regards, Yatsea

Will releasing my app in iTunes connect change the release date?

Hi there,
I have an unusual situation. We submitted version .9 of our app to the appstore, and it was approved. Even though the game is not done, we did this because we wanted a version that we could submit to the Indiecade festival (deadline today!), and we wanted to be able to send them a promocode rather than have to go through all of the hoops of UDID and all that.
We have a release date set for far in the future, and we also have the game set to 'pending developer release'.
Even though the game was approved and is ready for us to 'release' to the store, it wont yet spit out promocodes for us yet, because it is not 'live'. I want it to go live, but not actually be available on the store. I think this will work, I'm just concerned that if we push that button, it will change our release date and actually make the game available on the app store.
Can anyone confirm that this is NOT what will happen? I hope I'm making my situation clear. Thanks very much.
Chris

I would suggest you contact the iTunes Store via your iTunes Connect account and ask them. That's the way you'll get definitive answers; we're all just fellow users here.
Regards.

Problems downloading pre-release of Robbie Williams Rudebox

Has anyone else had problems downloading Rudebox by Robbie Williams after being notified that the pre-release was ready to download?
The movies and Digital booklet downloaded fine, but the music files stop with an error "An unknown error occurred (-50)."
Craig

Hi Kylelee,
Sorry for the belated reply, been really busy and haven't had a chance t report back.
I am unfortunate enough to own a PC too, and when I tried connecting to iTMS from the PC, it worked fine.
I received an email from iTunes Music Store Support:
1. Make sure you're using the latest version of iTunes, then choose "Check for Purchases" from the Advanced menu.
2. Enter your account name and password when prompted, then click the Check button. Your purchase should begin downloading. If you receive an error message while downloading, try again after turning off any firewall or web-accelerator software that you may have installed.
This article provides more information about resuming interrupted downloads:
http://www.info.apple.com/kbnum/n93015
But by this time I had my music.
Hope this helps

Pre-release Io-HD question

I know that it isn't released yet, in fact, I still don't know when it is scheduled for even after googling the heck out of it, but I have a fairly simple question about it's inputs. This is purely curiosity talking since I probably can't afford the Io-HD and also it being complete overkill if it can do this. My question is, I see that it accepts Y/Pb/Pr and my HDV camera has a component connection, but not HDMI. As a result, I can only capture via the firewire, which I've been told I can't easily convert into something like DVCPRO HD. Now my camera gives an HD output via the component, so could I plug my camera into the Io-HD and import full HD through it? I'm also wondering if that's useless since HDV is already heavily compressed and pulling into ProRes 422 is meant for uncompressed HD at SD data rates, there's be no advantage in doing so.
I know that this is all pre-release, but I bet many of you readers were at NAB this past week, or at least may have read something I didn't and have an answer, or maybe you just know the answer already. Any suggestions or ideas are appreciated.
Thanks,
-Brian

Andy, The Io HD is worth every dime if you can use it. Solutions like this cost thousands more before it. Crossconversion standalone box, works with any intel MBP or MP. Makes capturing from cameras with TC outs a snap.
Its a wonder. I actually think that costs going down will actually cover the expense of the box in no time. Capturing on the set is the way to go for most applications. The editor has to become familiar with the footage anyway... have him do the job for you on the set.
P2 brought this to the forefront I think. All the mistakes get caught and reshot right then and there... it's a wonderful thing all round.
Editor gets his roughs done right there on the set... I like this for all but a few things... I don't believe editors should be on narative film shoots.
Io HD captures any format except dual link. Turns any of the formats to the others too.... think of the uses... it's endless. MBP's are all you need for this. Add a matrox MXO to the mix and a 23" display and you have external video for the DP, director and editor too for under $2,000. MXO now has a blue only gun complete with proc amp controls. (new at NAB). Makes it very viable now I believe. You could buy any HD monitor of course too, but not without spending a bit more. Gotta have dem blue only views for calibration.
Let alone being able to capture to the Pro Res format on a laptop... to a cheap set of drives external SATA even FW raids would be more than adequate. G-Tech mini raid anyone? The costs in storage ALONE pay for this box. One would be best off buying this before he spent a ton on fast storage. It cuts storage and makes laptops actually edit the "real thing". works with towers of course. Has a handle and pretty lights. (they are the audio level during input)
Jerry

In ME29N,can PO be unchangeable except the release options button?

Dear expert
In purchase order release via TCODE ME29N,besides release options button, approver can change item information, for example,material short text and net price. Because our it's our audit conflict here, could we set all purchase order unchangeable except the release options button?
Thanks
Linfeng

Hi,
Material text can not be changed (flow from material master), can changes quantity & other parameter in the PO. Your requirement can be control by authorization with object(basis side)
Letu2019s say
User-1 can Create PO(ME21N), no authorization of ME22N & ME29N
User-2 can Change PO (ME22N), no authorization of ME21N & ME29N
User-3 can Release PO(ME29N), no authorization of ME21N & ME22N
Regards,
Biju K

Snow Leopard Pre-release forum???

Will we see a pre-release forum for Snow Leopard? A few questions are starting to surface in the Leopard forums.
Thanks
J.C

alexrav wrote:
This is the general informations
but I was hoping someone had already tried to install a beta release
Alessandro ~ Many people must have already successfully installed a beta on a MacBook with Intel Processor and 2 Gb Ram — otherwise Apple wouldn't be releasing Snow Leopard on Friday. Since your Mac appears to meet the general requirements, what exactly is your concern?
By the way, here's a list of applications and their compatibilty status with Mac OS X 10.6 Snow Leopard — the site may be slow to load:
http://snowleopard.wikidot.com/start
...It doesn't appear to include Widgets — but perhaps someone can provide info on that.

Xorg is pre-release

In solving my various xfce4 issues, I have discovered I have a pre-release version of the X server. How can I use pacman to change my packages, so that I am only using non pre-release packages? If I do a sync in pacman after this, it would change all of my packages, right?
/etc/pacman.conf:
[core]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[extra]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
[community]
# Add your preferred servers here, they will be used first
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
Server = File:///home/custompkgs
My pacman.d/mirrorlist contains only official repositories. Do I need to comment out that last server line? I dont know what File:///home/custompkgs goes to? I guess as of right now it does nothing because I havent added any files to /home/custompkgs, right?

xorg-server 1.6.3.901-1 is the only version available in any of the official Arch repos. If you want an earlier version, read the Downgrade Packages page in the wiki. If you want to know why the devs have chosen to package this version, read the arch-dev-public mailing list.
As clearly stated, /home/custompkgs is an example of a custom repo. It does nothing, unless you make it do something.

"change" pre-release beta button unreachable (Italian Yosemite)

Similar Messages

Maybe you are looking for