Change preferences for built-in isight camera?

I have a MacBook Air Rev C, 120GB, and it has a built-in isight camera. I wanted to change the video settings as I look really dark on camera and looked for isight in Applications and couldn't find it. Is that because you can't change any settings for isight camera?

applecore_eater wrote:
... I look really dark on camera ...
Add light to the room is the best fix: http://support.apple.com/kb/HT3097
iSight apps adjust automatically when your video area is bright enough.
EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.2) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.2)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Similar Messages

Is there any way to change the settings for the built in isight camera?

I'm sure someone else has probably already asked this, but is there any way to change the settings for the built in isight camera? The resolution is horrible.

Welcome to  Discussions, Prissymissysays
The last Apple-published resolution data I saw said that iSight's resolution is 640x480 VGA. I do not know of any way to change iSight's resolution, but that level is plenty of quality for my webcam needs.
The software you use to operate your iSight controls it, so specific answers will depend on what software you are using when you need more resolution. Check Help in that application to see if it can change iSight's resolution.
Some software, such as Apple's QuickTime 7 Pro allow you to change iSight's video quality and compression level with its QuickTime Player > Preferences > Recording > Quality: setting. You can add iGlasses software to manually override some iSight settings that are otherwise controlled automatically by the software using iSight. However, I do not think either of these options really changes iSight's resolution.
Check whether your iSight's lens cover has fingerprints or smudges on it. Then check iSight's image quality of your face in full sunlight about two feet from the lens. Best image quality requires more light than what most people would consider normal room lighting.
If you are still having problems, consider the applicable suggestions from How to Troubleshoot iSight.
If you need better resolution than iSight can deliver for some special imaging requirement such as close-up or high-accuracy images, you may need to consider using a different camera that better meets your special needs.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Want to manually ajust the built in Isight camera for Ichat?

Want to manually ajust the built in Isight camera for Ichat?
Sometimes because of backlights and face look black for example, etc.

Hi
You need iGlasses http://www.ecamm.com/mac/iglasses/
Tony

How can I use the built-in Isight camera with an external camera (usb/firewire) at the same time?

How can I use the built-in Isight camera and an external video camera at the same time?
I'm wanting to stream over Oovoo/Skype/etc. using 2 cameras.
Thanks

Simple question with a not so simple answer.
(a) If you mean that you want to run multiple apps simultaneously using a different camera with each app, you may encounter computing power limitations. Digital video is processor intensive. The only way to know if your Mac can do this it to try it. If the video does not work together but each app works when it it the only app running, you are likely overloading your Mac's ability to process and/or move all the required data in your data bus. You can get a better indication of whether this is the case by watching your Activity Monitor utility while running the apps you want to use.
(b) If you mean that you want to have more than one compatible camera connected to your Mac simultaneously for ease of changing between video sources, some, but not necessarily all, apps you are using to operate your camera(s) allow you to select between your cameras.
How you select among connected cameras depends on which application you are using. Here is how camera selection works in a few examples:
(1) For iChat, you can choose which iSight you use in the "Camera:" choices bar in iChat > Preferences... > Audio/Video that appears when more than one compatible camera is connected. Although your camera choices will be different, the choices bar will look something similar to the Preferences settings shown here:
If you cannot see the "Camera" choices bar, your Mac is recognizing only one (or none) of your cameras. In that case, consider the suggestions fromhttp://support.apple.com/kb/HT2090 for iSight problems or refer to your other camera's documentation for help.
This particular choices bar solution applies ONLY to iChat. Most other applications also have settings that allow you to choose which camera to use. However, they do not all work the same way.
(2) For instance, iMovie HD's camera choice is NOT set via Preferences. When you have more than one compatible camera connected, iMovie6 HD uses a drop-down menu choice something like this (depending on which version of iMovie you use):
Note: Because I had no built-in iSight connected when I made this example, and because my external iSight was not connected, the drop-down menu showed only "Time Lapse." Because your Mac has a built-in iSight, your built-in iSight would show in the drop-down menu even when no other camera is connected. Connecting an additional Mac compatible webcam should allow you to choose either camera.
Other iMovie versions work slightly differently.
iMovie 9 (from iLife '11) uses a different camera choice button shown in this article:
http://docs.info.apple.com/article.html?path=iMovie/9.0/en/mov39f84285.html
iMovie 8 (from iLife '09) is slightly different as explained in this article:
http://docs.info.apple.com/article.html?path=iMovie/8.0/en/10172.html
In general, you can use your Mac's help for the application in use to find out how to select among more than one connected camera.
(3) Photo Booth in Snow Leopard 10.6.x and later uses the Photo Booth > Camera menu command to select which camera to use.
Note for readers with older Mac OS X: The previous version of Photo Booth that came with Tiger (10.4.x) is such a simple, basic app that it offers no menu selectable choice. Unless your built-in iSight is already occupied as the camera being used by some open application before you launch Photo Booth, Photo Booth will use ONLY your built-in iSight.
However, you can use the trick from ¶ 4 of http://docs.info.apple.com/article.html?artnum=302781 to let Photo Booth use an external camera.
(If you have an external Firewire camera connected, it may be used in preference to any USB webcam. If that is a problem for you, merely disconnect the problem Firewire device.)
(4) For FaceTime, launch the app and click the Video menu item.
If your Mac recognizes more than one connected compatible camera, a "Camera" section listing the cameras from which you can choose will appear there. Clicking on the desired camera name will let you select the one you want as shown in this image from my Mac Pro and LED Cinema Display:
If your Mac recognizes only one compatible camera, the "Camera" section will not appear in the Video menu, but FaceTime will automatically use the connected camera that is recognized by OS X.
(5) I do not use Skype oir Oovoo. For those or other apps, see Help for each app for info on how to select your desired camera.
Message was edited by: EZ Jim

Built-in iSight cam randomly stopped working. All I get is a green screen!

I used it just yesterday with both Photobooth and iChat with no problems what so ever. Now all it shows is a green screen! Anybody know what the problem may be and how to fix it??? Thanks!
-Jonathon

Welcome to Discussions, -Jonathon
Here are the solutions that help most users who encounter green-screen problems. None are complicated, but the only way to find which one will work for you is to try them one-by-one until you find the one that fixes your Mac.
(1) Check your System Preferences as explained in this kbase article about Built-in iSight camera produces blue or green pictures.
(2) If your System Preferences are set correctly, try every suggestion re: Built-in iSight in the "How to Troubleshoot iSight" article.
Be sure to include the checks for whether the problem is "application-specific" and "user-specific".
If you need help creating a new user account to check whether your problem is "user-specific" during Troubleshooting, see this Help article.
(3) If resetting or the other suggestions do correct your problem, try the following:
• Backup your Home Folder, or at very least, your important files.
• Repair permissions. (Click here if you need help.)
• Then download and apply the Mac OS X 10.4.10 Combo Update v1.1 (iNtel).
• Finish with another Permissions Repair, and then check your iSight again.
Users have reported fixes to a variety of audio, video, connectivity, and software conflicts and unreliability issues after properly applying Combo Updates.
(4) A few iNtel Mac laptop users have also reported success after unplugging their Macs and leaving the battery out for half-an-hour to overnight.
(5) If none of these suggestions help, contact Apple or your Apple-Authorized Service Provider for a professional check.
EZ Jim
PowerBook 1.67 GHz Mac OS X (10.4.10) G5 DP 1.8 External iSight

Can you adjust the tint on the built-in isight camera on an iMac?

Can you adjust the tint on the built-in isight camera on an iMac? It is curently too red on my iMac.

The iSight has no mechanical parts. The iSight will adjust to the light by changing the sensitivity of the sensor's receptors. It is possible to manipulate the picture with software routines and simulate slow shutter speed. For photography look [here|http://www.boinx.com/fotomagico/overview>.
Message was edited by: CodLBi

Flash player doesn't see built in iSight cam

Using an app that I want to give access to my cam and mic. iMac OSX10.6.3, Firefox 3.6.3., built-in iSight cam. Dialog box asking me to allow/deny comes up, but I can't click on anything.
Right click, click settings, can't make any changes to that dialog box either.
Went to Adobe Flash Player site, settings manager, Global Security Settings tab, typed website into box and set for allow. Note: on this tab there is a lock showing, but still allowed me to put site in.
Site is also "allow"ed on Privacy Settings Panel.
Camera Settings does not show iSight camera, but only Logitech Cam (which is not on computer). Same for microphone tab.
This also happens with Safari, and on my Macbook Pro, which is in a different location and a different network and ISP. At one point, I got it to allow access tby the website, but it still didn't recognize the camera. Reinstalled Flash Player and now back to square 1.
Any idea what I'm missing? Thanks.

OK, I'm familiar with the VW. I didn't know Igor had switched to Mac.
I get this when I try to open the bb uploader in Firefox:
It is a static popup, meaning I can neither click allow or deny, nor can I close the window. Only option is to close the page itself. This on a MacBook Pro (late 2009 Unibody, 13" with built in iSight and Flash Player 10.0.45.2 (browser plugin).
I'd have to say the trouble isn't with the MacBook, or with Flash, but Igor's software in the bb upload. My Vista machine with a Logitech, initializes immediately after I click Allow, which I can't even do with the Mac.
As an aside, the VW does have the option to upload from your HD. You can simply take the pic using PhotoBooth, and upload it.
Edit:
I was able to initialize the bb uploader using Safari, and selecting USB Video Class Video in the advanced settings.
Looks like it may be an issue with Firefox.
Message was edited by: I_Know_Nothing_at_all

Built in iSight camera no longer showing up or recognized by iMac

Hello there - I have a white 1.83 GHz Intel Core 2 Duo iMac with a built in iSight camera, and the camera is no longer showing up, or is not recognized by the computer any longer. Very strange! The little green LED by the camera is not lit any longer, and the camera is not recognized any longer by Photo Booth, iChat AV, or any of the other apps that would use the camera. This is a real pain, because I am leaving for France in a couple days and am taking my MacBook Pro with me, and am hoping that I can use iChat AV to talk to my kids at home on the iMac. I do have an extra iSight camera that I have hooked up to the iMac and can use in a pinch, but I really want to use the built in camera on the iMac. Any hints / ideas / suggestions on what to do for this problem would be greatly appreciated. Thanks!

No, unfortunately that did not help. I did the following...
1. See if the issue is application-specific. - Nope. Camera is not recognized in any of the apps that it should be recognized in, I tested iChat AV, PhotoBooth, ImageCapture, and iMovie.
2. See if the issue is user-specific. - There's only one user account on this Mac, so I couldn't do that.
3. Find out if the computer recognizes the iSight. I went into System Profiler and checked the USB profiler, and the camera does not show up.
4. Reset SMC or PMU. These just looked like different ways of restarting, which I did multiple times.
I have also run my Software Updates (on OS 10.5, which I did with a clean install from an OS 10.5 DVD by the way) and still no camera. This problem started happening with the original OS 10.4 (which it came with) and I was hoping a clean install of the OS would help, but no.
I'm wondering if resetting the PRAM might help, but I can't remember those keys you hold down while restarting (was it Apple-Option-P-R ?) or if that is just reaching waaaaay back to the pre OSX days.
Here's the kicker though - if I plug in a FireWire iSight camera, all is well. I'm really hoping that the camera isn't jsut dead, but it's starting to look that way. Would Disk First Aid or maybe DiskWarrior help?

Built in isight camera no longer showing up or recognized

Hello there - I have a white 1.83 GHz Intel Core 2 Duo iMac with a built in iSight camera, and the camera is no longer showing up, or is not recognized by the computer any longer. Very strange! The little green LED by the camera is not lit any longer, and the camera is not recognized any longer by Photo Booth, iChat AV, or any of the other apps that would use the camera. This is a real pain, because I am leaving for France in a couple days and am taking my MacBook Pro with me, and am hoping that I can use iChat AV to talk to my kids at home on the iMac. I do have an extra iSight camera that I have hooked up to the iMac and can use in a pinch, but I really want to use the built in camera on the iMac. Any hints / ideas / suggestions on what to do for this problem would be greatly appreciated. Thanks!

Sorry to tell you, you're in the wrong forum, this is for G5 PPC iMacs. You need to be [here|http://discussions.apple.com/forum.jspa?forumID=1110].

RE: I need drivers for an external isight camera on windows 7 64-bit

IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!

witkewoo wrote:
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!
(1) External iSight is, as you recognize, a Firewire webcam. It has its own built-in microphone.
Built-in iSight is a USB camera. It has no mic of its own.
Windows® video drivers for both iSights are included. However, as explained in the following link, there are no Windows® audio drivers for external (Firewire) iSight’s internal microphones:
http://en.wikipedia.org/wiki/ISight#iSightonWindows
(2) If you can track your problems to your Boot Camp or Windows installation, see FAQs and troubleshooting here:
http://www.apple.com/support/bootcamp/
As reported by user mikkel_nielsen here:
http://discussions.apple.com/message.jspa?messageID=11953256#11953256
you may merely need to update and reinstall the drivers.
I do not use Windows®, but if you get no better help here, the best I have to offer is:
Check iSight with OS X apps and user accounts: http://support.apple.com/kb/HT2090
If all works there, consider Boot Camp/Win7 FAQ & links: http://support.apple.com/kb/HT3986
Also Boot Camp 3.0, Mac OS X 10.6 FAQ & links: http://support.apple.com/kb/HT3777
If all else fails, this search in Boot Camp might give you some ideas or an idea for a new topic there:
http://tinyurl.com/39lu9fn
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Built in isight camera not working with flash

My built in isight camera on my macbook works just fine in photobooth and in skype or ichat.. but just in the past week or so, it will not work when im on websites that use flash. I've seen some threads that say that I need to go into settings and make sure that the camera chosen is the USB. When i go into flash settings, the only options are Google1, Google2, or Built in isight. It doesn't work with any of them. Does anyone have any idea how I can make it work again?

zeppelinfan1234 wrote:
I don't have google add ons. I followed the path but i have no Google folder in Application Support. Any other suggestions?
Your problem is not the same as that posted by the OP, and your system info shows you using Mac OS X (10.5.6).
For your symptoms with this system, I suggest you do the following:
(1) Apply the 10.5.8 Combo Update using the following process:
• Backup your Mac and turn off Time Machine
• Disconnect peripherals and restart Mac
• Use Disk Utility to repair permissions
• Download and install
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
• Repair permissions again immediately following the restart that finishes the update.
• Test whether Flash works for you now.
(• Turn Time Machine on later when you are satisfied that the update worked.)
(2) After applying the 10.5.8 Combo, if you are still having problems, download and install the latest Flash player compatible with your system:
http://get.adobe.com/flashplayer/otherversions/
Also check any other third-party browser plugins or other add ons. Apply all available updates and uninstall any third-party items that are known to be incompatible with your system.
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.5); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.5)
LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

MacBook Pro (Late 2007, 2.4/2.2GHz) - Built-in isight camera issue

I have a MBP (as mentioned, Late 2007) running Lion 10.7.2 (updated yesterday). And I have a problem with the built-in iSight camera
Same with photo booth and skype.
So far I have tried
1) shutdown, unplug power, remove battery, press power for 5 seconds, plug battery back, plug power, boot. No help. No LED's light up to make my day.
2) Press P R - Alt Cmd during boot (2/3 cycles like that)
Could anyone throw some light into this?
Much thanks in advance.

Try reinstalling Lion:
Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

How to I get the built-in iSight camera to work?

My built-in iSight camera is working but the "capture" button is greyed out and I can't record.

Hi there,
You may want to take a look at some for the troubleshooting steps found in the article below, specifically the section titled "Built-in iSight cameras"
How to Troubleshoot iSight
http://support.apple.com/kb/ht2090
Hope that helps,
Griff W.

Can I use built-in iSight camera with other apps?

Can I use built-in iSight camera with other apps?
How?
doesn't work in imovie or image capture

Hi Judson,
THe built in iSight will actually work with iMovie if you have the version of iMovie which comes with iLife 6. (see http://docs.info.apple.com/article.html?artnum=61929 for a mention)
There is a slightly clumsy "workaround" available for use with earlier versions of iMovie, but you need a dv cam to use it - see http://www.macosxhints.com/article.php?story=20051217210335199
I gather that "EvoCam" - http://www.evological.com/evocam.html - will also work directly with the built in iSight.
So too, should recent versions of QuicktimePro.
As for other apps, tell us what you wish to do with it. We may be able to come up with some suggestions.
Cheers
Rod

Can I use my MacBook's built-in iSight camera to record footage in FCE?

I want to know if I can use footage I shot with the built in iSight camera. My regular video camera is not working, and I have some footage taken from my iSight camera. Is there anyway I can use my built in iSight camera in Final Cut Express 4?

http://support.apple.com/kb/HT2264
you can also capture from your iSight using Quicktime Player and then export the movie for use in FCE

Change preferences for built-in isight camera?

Similar Messages

Maybe you are looking for