Change premiere elements 10 from pc to laptop

Hello,
Can someone advice me how to change premiere elements 10 from my pc to my laptop?
Thanks, Caroline

Just install it on the laptop like you did on the PC.  If you want to you can leave it on the PC as well since you are allowed to have two activated installations.  If you need to download it to your laptop you can get to it thru the following link...
Download Premiere Elements products | 11, 10

Similar Messages

  • Stop Premiere Elements from downloading

    I use a cellular Internet connection and pay per MB
    Every time I open Premiere Elements it uses 25 MB
    Updating is disabled but it has not stopped Premiere Elements
    This does not happen with Photoshop Elements
    This does not happen with any other application
    All application Updating is disabled
    I do Manual Updates for everything
    I have a Wireless Watcher that shows every byte used
    I have tested this with every application
    This only happens with Premiere Elements
    Just to be sure I disabled all Adobe applications
    It does not download anything, Just uses up 25 MB each time
    How can I stop Premiere Elements from using up my MB

    Thanks for the reply:
    In Preferences you can choose to not be notified about updates.
    However there is no option not to check for updates.
    So that is what is happening, it is always checking for updates.
    There should be a option to disable checking for updates.
    I disabled updates in Adobe Reader X and Flash Player and
    it does not check for updates for those.
    I check manually for updates because of my connection but
    mainly because when there is a update available I will go to the source
    and download the update and install it myself which is the better way.
    I will look for a way to disable the automatic checking for updates by
    Premiere Elements and if not found I will contact Adobe as you suggested.

  • How do I install Adobe Photoshop and Premiere Elements 11 on my laptop if it has no CD port?

    I have already bought both Adobe Premiere Elements 11 and Adobe Photoshop Elements 11. I want to install them on my laptop but my laptop doesn't have a CD drive. How can I install them??

    Downoad the trial version and activate it with your serial number.
    Mylenium

  • Installing Premiere Elements 11 on another laptop

    Hello,
    A while ago I bought Premiere Elements 11 and installed it on my mother's laptop. Now I'm about to buy one for myself and I was wondering if I could uninstall the program on this laptop, and install it on my own laptop. The previous time I had to install it with a serial number. Anyone who can help me with this?

    that's actually not in compliance with your license agreement.
    while you are entitled to two concurrent installations/activations with your single user license for premiere elements 11, you are supposed to be the primary user of the computer with both installations and therefore would not be running both installations simultaneously.
    you and your mom cannot both be the one single user licensed for premiere elements.  and, in the scenario you sketched, you could both be using premiere elements simultaneously.

  • Can you change Premiere Elements 13 timeline to act like Premiere Pro CS4?

    Hi there,
    I recently started using Premiere Elements 13 after previously having used Premiere Pro CS4 (both mac versions if that makes a difference). All is great but I have encountered one major difference which makes Elements 13 a bit of a pain and was wondering if it was changeable. Basically, when you alter the length of a clip that's touching up against another one they remain stuck together and everything else in the timeline shifts up accordingly. In Premiere Pro CS4 if you changed the length of a clip joined to another (where the two join) it would simply create a gap. Frankly, I find the latter a much better way of working. What I tend to use Premiere for on the whole is adding still images to a voice track rather than working with video clips with linked audio. I know this isn't exactly what Premiere is designed for but it worked so much better in CS4 and wondered if you could tweak Premiere Elements 13 to behave a bit more like CS4.
    Any help much appreciated!
    Iain

    lain.thp
    Hold down the Ctrl key as you shorten the duration of a clip using the mouse cursor. That should give you the gap that you seek. That works for Premiere Elements Windows. (I am strictly an Elements Windows user.)
    With your Premiere Elements Mac computer, try holding down the Command key as you shorten the duration of a clip using the mouse cursor.
    Please let us know if that worked for you.
    Thank you.
    ATR

  • Change WBS element from Sales order

    Hi...
    I have created one sales order with WBS element assignment then I have created billing document and released to accountingu2026.
    Accounting and controlling documents are fineu2026
    After creation of accounting document system is allowing to change or delete the WBS element at sales order item levelu2026same time profit centre field does not allow to change or delete
    We donu2019t want to user to change WBS element after creation of accounting documentu2026that field should be shown in greyu2026
    Please help me to solve this issueu2026
    Thanks,
    Raj

    Hi,
    You can create a Transaction Variant for the transaction VA02 in which you have to maintain the WBS Element field as output only.
    1. Go to SHD0, enter VA02 in Transaction & give a name to the transaction variant and press Create.
    2. Enter an order no., go to the item "Account Assignment" tab.
    3. Check "Output Only" against WBS Element in the screen listing all the tabstrips & Fields.
    4. Exit & Save.
    You will be returned to the SHD0 screen.
    Select the "Standard Variants" Tab under "Standard Vriants" tab. Press activate to activate the Transaction Variant.
    Go to VA02 to test the variant. You will get the WBS Element disabled.
    Revert in case of any doubts.
    Regards,
    Vijay

  • I want to install photoshop elements 9 and adobe premiere elements 9 in my laptop and in the pc.

    Do I need two licenses or can I use the one that comes with the software?

    Hi,
    Photoshop & Premiere Elements can be installed on 2 computers without the need for an extra license.
    Please refer to this link if you have any questions about the End User License Agreement:
    Thanks

  • Hi i cant download premiere elements from the server

    Hi
    Icant downlod premiere elements for mac the akimbo doesn´t work (says have error)
    and click download data nothing happens

    You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

  • How to Change UI element from input Field to Date Picker

    Hi All,
    One Custom View is created in which we are pulling some fields from a custom context node created using the value Node.
    For one of the field which is already an input field we need to convert it to date picker.
    in the GET_P_METHOD
    CASE IV_PROPERTY.
    WHEN 'fieldType'.
    rv_value = cl_bsp_dlc_view_descriptor=>field_type_radio.
    WHEN 'radioCols'.
    rv_value = '1'.
    ENDCASE.
    We can change the attribute to clbsp_dlc_view_descriptor_ and bring
    checkbox,radiobutton,hyperlink and all but not finding anything for Date picker.
    Can anyone suggest a method by which we can convert a UI element to Date Picker.
    Any suggestions will be highly appreciated.
    Regards,
    Sijo

    The technical data type for that field should be DATS then input help will automatically come.
    Also in get_m method of that attribute should have
      metadata = cl_crm_uiu_bt_date_tools=>get_m_date( ir_model_binding  = me
                                                      iv_attribute_path = attribute_path ).
    Regards,
    Shobhit

  • Change WBS element from non-statistical to statistical

    Hi all,
    In the control tab of a WBS element, I am trying to change it from non-statistical to statistical. However, the checkbox is grayed out and not allowing me.
    I have tried using transaction CNMASS for this but I am getting error CJ727: Changing the contents of the field is not permitted
    How can I resolve this?
    Thanks,

    i guess you have released the wbse. so system will not allow to indicate the statistical check box. as per standard you
    have the indicate the check box before you release the wbse.
    if you haven't the wbse then check the field status of statistical in opuk.
    regards,

  • How to change ui element from input field to TextArea?

    Dear colleagues,
    When I try to add an attribute of type string  in Ui configuration, I found it's by default INPUT_FIELD and can not change to text_area, does any one know how to do this?
    It will be better if you can tell me how to set text and get text from the text edit.
    Thanks and best regards,
    Adners

    Hi,
         It's simple. After you use the config tool to align your fields, generate the p_getter for your attribute and put in the following code.
    CASE iv_property.
        WHEN if_bsp_wd_model_setter_getter=>fp_fieldtype.
          rv_value = cl_bsp_dlc_view_descriptor=>FIELD_TYPE_TEXTAREA.
      ENDCASE.
    Setting or getting values are not a problem. You can do it the usual way by accessing the model/value bo's attribute values.
    Regards,
    Arun Prakash

  • Error code U44M1U5 for updating PSE and Premiere Elements from 12.0 to 12.1

    Why not just give a hint in plain language rather than an error code and no listing?

    See this help document:
    http://helpx.adobe.com/photoshop-elements/kb/elements-12-1-update-error.html

  • Transfer problem from Photoshop Elements 9 to Premiere Elements 9

    When I transfer a slideshow from Photoshop Elements 9 to Premiere Elements 9, some slides change orientation and appear compressed. How can I avoid this problem?
    Also when transfering  from Photoshop Elements, Premiere Elements opens a window to record the name of the project; what is the proper setting for the project? DSLR, interface DV...?
    Recording a Blueray with Premiere elements from sequences of slideshows saved as WMV (highest resolution 1024x768) , pictures do not fill the screen. I realize that the photo size (4:3) is different from the TV screen (16:9), and that cropping would be necessary to fill the screen, but is there a format WMV for wide screen or can Premiere Elements do the cropping?  A wide screen ratio would be nice to have in Photoshop Elements cropping toll.
    Thanks for any help you can provide.

    One problem with orientation is that many viewing/cataloging programs will allow one to change the orientation, but that is only for viewing - no pixels are actually changed. A flag is placed in the metadata, telling many viewers to rotate the image, when viewed. Adobe Bridge, the big-brother to Organizer, and installed with many Adobe suites and programs, does this. It is not until one does a Save for the image, that the rotation is actually applied to the pixels. Until then, it's just an instruction to a viewer on how to display the image.
    I second Steve's comments on the Scaling of stills, outside of PrE, prior to Import. This ARTICLE will give you some background and some tips for automating the process.
    Good luck,
    Hunt

  • Is it possible to uninstall Adobe Premiere Elements 13 from one computer and put it on another PC, using the same serial number?

    I had installed Adobe Premiere Elements 13 on my laptop, which is slow. Is it possible to completely remove the program from my laptop, and reinstall it on another PC, using the SAME installation disc?

    Tomquer
    If all you have is the Premiere Elements 13 purchased activated serial number on one Windows computer, you can go ahead and do nothing else but install the program from the disc on the second Windows computer with the same purchased serial number.
    That will leave you with the purchased activated serial number on two of your computers.
    Adobe allows you the same purchased activated serial number on no more than 2 of your computers. So, nothing to do but to use one at a time.
    Lots of scenarios beyond.
    1. Deactivate Premiere Elements 13 from computer 1. Do not bother to uninstall. Deactivation is not the same as uninstall.
    To deactivate, in an opened Premiere Elements 13 project, go to Help Menu/Sign Out. Close out of there.
    Then do nothing, leave the program in the deactivated/installed state.
    2. Deactivate and Uninstall Premiere Elements 13 from computer 1.
    Any questions or need clarification, please let us know.
    Thanks.
    ATR

  • Premiere Elements 12 keeps Crashing During Render.

    Hi,
    Have been using Premiere Elements 12 in my laptop w Windows 8.1. Never has been problematic, but even after restart, it's crashed twice today while rendering video which is just under 20 minutes in length. As you know, it's very time-consuming- about 2 hours for a file this long. Any ideas?
    Thanx in advance,
    George

    hi and thanx for getting back so quickly.
    the video in question is using clips from a canon dslr, a samsung S4, audio from a zoom portable recorder and some odd video from an old flip handheld video recorder.
    no, I don't have the update but I will make sure to do that immediately. but let me bring you up to date on what's happened since I posted my question. until this morning, no issues whatever, and I had completed a render on that very same file yesterday. a mispelling was pointed out in some text (grrrr..) so that was the only change to the file. I tried re-rendering and I got the error message that PE had stopped. restarted the computer, and tried again with the same outcome. as this was number four in a series of four mini-docs, I had to correct the same misspelling in the other three. so far so good- I've corrected and rendered successfully two of them, which leads me to believe something is corrupted in this file, number four. I did go to the preview files for this particular file and yes, there seem to be more preview files than in the others. one empty, one almost 4 gig, one about 900 mb, and and one 145mb. should I try dumping them or moving them somewhere else while I try another render?
    thanx again, and hope this makes sense:)
    george

Maybe you are looking for