Change print program of Customer Balance Confirmation (F.17)

Hey experts,
I created a customer print program "ZSAPF130D" which is going to replace the standard print program "SAPF130D".
However, I found no possibility to change the print program for transaction F.17 in the customizing (SPRO) section.
In customizing
SPRO--> Financial Accounting (New) --> Accounts Receivable and Accounts Payable
--> Business Transactions --> Closing --> Count --> Balance Confirmation Correspondence --> Make and Check Settings for Correspondence
--> Define Form Names for Correspondence Print
I was able to attach my new custom form (sapscript) to the Customer Balance Confirmation but found no way to change the pring program.
I could be able to change the attached program via se93 but i don't know if this is the right way to do so.
Could you please give me some advice,
thanks in advance,
treee111 - Ben

Hi Gordon,
you are right, I'm sorry that I posted here.
Could a moderator please delete this post since I have already postet in the right forum.
Thanks,
Ben

Similar Messages

  • Vendor/Customer balance confirmation lists print

    Hi,
    when we want to print vendor/customer balance confirmations, transactions f.18/f.17 always print:
    - form set
    - reconciliation list
    - results table
    - if there is some error - error list
    We want to restrict the printing only to FORM SET and we DO NOT want to print reconciliation list and results table.
    Is there some way to configure F.18/F.17 to print only FORM SET?
    Thank you.
    Ľubou0161

    Hi Lubos,
    I have the same problem...how did you solved this?
    Thanks and regards,
    Victor

  • Vendor/Customer balance confirmation prints

    Hi,
    when we want to print vendor/customer balance confirmations, transactions f.18/f.17 always print:
    - form set
    - reconciliation list
    - results table
    - if there is some error - error list
    We want to restrict the printing only to FORM SET and we DO NOT want to print reconciliation list and results table.
    Is there some way to configure F.18/F.17 to print only FORM SET?
    Thank you.
    Ľubou0161

    Hi Lubos,
    I have the same problem...how did you solved this?
    Thanks and regards,
    Victor

  • Logic to get customer balance confirmation at profit center level.

    Hi All
    Please help me understand the logic to get customer balance confirmation at profit center level.(not at company codewhichis available)
    On what basis developments can be done.
    Detailed and early Inputs will be appreciated
    Thanks in advance.
    vadapav

    Hi
    First of all, I liked your user name...
    I have a basic question with regards to your requirement... Customer is an external party... he has got nothing to do with your internal definition of profit centers..
    Hence, if Customer A is buying goods from you belonging to Pr Ctr B and C - He wlil expect you to send a balance conf letter which aggregates total balance... He will be, in no way, concerned with your internal division of profit center wise balance
    Still, if you would like to go ahead with your requirement ,  then identify the open line items from BSID or BSAD (I dont know which one of these stores open line items) , Take that document no to table FAGLFLEXA and identify your profit center... This is assuming you are on ECC 6.0 and use New GL
    If you are not on ECC 6.0, then identify the open line items from BSID or BSAD and Take that document no to table  BSEG and read the profit center from revenue line item.. These revenue accounts can be included in a SET created in GS01 rather than hard coding in the program
    Regards
    Ajay M

  • How to call new window and text element without changing print program

    Hi Friends,
       I have requirement like this . i have a standard print prog and custom form. i want add 2 to 3 extra windows in the form and i have to print some data. but how can v do this with out changing the print program. i know that to pick new fields through subroutines. but how can v call new windows and new text elements with out changing the print program.
    usually in the print program we write as follows.
    write_form
    window = 'HEADER'
    textelemtn = 'HEADER'
    can we accomplish this one also through subroutines or any other way is there.
    can any one pls suggest this.
    Thanks in advance.
    Rahul

    u  copy the standard print program and make custom program.
    write your own codes in it.
    assign this program in the place of standard print program.
    Reward points, if helpful.

  • Vendor & Customer balance confirmation

    As you know there is possible to use F.17 and F.18 for printing balance confirmation for vendors and customers.
    Is there existing any transaction and printout, which helps to print both information on one printout when customer and vendor are the same (has different numbers, but are linked in customization, cause they are the same company).

    I think you have misunderstood me. Usually, F.17 produces one printout which consist of header data, address data and balance information. F.18 produces similar output. If you will combine them in spool, you will receive following printing:
    customer header data
    customer address data
    customer balance data
    customer footer data
    vendor header data
    vendor address data
    vendor balance data
    vendor footer data.
    Because vendor and customer are the same company, this means that header data, address data and footer data are the same.
    Therefore we want to combine them into one, having following structure:
    header data
    address data
    result of summarizing customer balance  and vendor balance
    footer data

  • Customer balance confirmation does not equal to customer line item display

    Hi All
    When I run F.17 transaction (program SAPF130D) the totals don't equal to "customer line item display" program (FBL5N) totals.
    When I run it for a specific customer and company code, I can see that some items from the customer line item display are missing. These are regular items (invoices) like other documents that appear in the balance confirmation.
    The selection parameters are the same and the date is equal - I run the report as of today.
    Can anyone advice please?
    Thanks
    Ofer

    Hi
    The problem was because of a customer hierarchy issue. Some of the invoices were issued to different sold to but with the same payer.
    It can be displayed also in the balance confirmation. I just need to mark the two check boxes:
    "Head offices and branches" and "check alternative head offices". Excellent.
    Now I have another problem, that in this case, this issue is mentioned in the output: "Dear customer, in this balance confirmation we added the next branches...etc."
    Can this remark be eliminated from the output?
    Thanks
    Ofer

  • F.17 customer balance confirmation letter

    hi
    I want to get balance confirmation letters print for 100 customers but system is showing only first customer.

    Hi
    Please check this links
    Standard BAPI to get Customer Cumulative Balence
    http://forums.sdn.sap.com/rss/rssmessages.jspa?threadID=2030213"
    Daily Cumulative Customer Balance
    Regards
    Jyo

  • How to change a SAP script output without changing Print Program

    Hi,
    I want to change output of standard PO report printing object. I have to change the ZSAPSCRIPT but I have to keep the print program intact. please give me ideas.

    Hi for that you have to do following.
    1. Create a ZPROGRAM
    2. Write a Perform in your SAP Script.
    3. Write Form inside it your ZPROGRAM.
    Hope this will help you.
    <i><b>Reward points for helpful ans.</b></i>

  • Payment program F110 - how to add second print program in customizing

    Hello all,
    i would like to add second (another print program after standard sapscript print program customized in table T042Z) print program in transaction F110. This second smartform print program should be customizable  and triggered automatically within payment run.
    Thanks, zd.

    Hi,
    You can assign two forms in FBZP.
    Payment methods per company code
    Double click on payment method
    In Form Data
    You can assign Next Form 
    Both the forms should get printed when you run F110.
    Thanks,
    Ravi

  • F.17- Customer balance confirmation

    Hi,
    What are implications of running F.17.
    Can I run the programme any number of times during a period ? even if it is just for testing ?
    Thanks
    Anil

    HI,
    yes you can run it many times but I doubt this makes sense as the balance confirmation is made based on a cut-off date once a year.
    The use is:
    This program creates the letters to your customers and the necessary
    reply letters for checking the receivables and the payables.
    Within F.17 tick the i (=information-button) to get more information.
    Best regards, Christian
    Edited by: Christian Ortner on Jul 14, 2010 2:43 PM

  • Need adobe print program for sales order confirmation

    Hello folks, anybody an idea about a sap standard print program and form for adobe forms concerning the sales order confirmation. can't believe that the old sap script RVADOR01 or ...01 ist still the standard. thanx for help
    YES i searched the forums before posting a thread, and i didn't find relevant articles

    The Adobe PDF-based forms for sales are available since Enhancement Package 2 for release ECC 6.0.
    Order confirmation (SD_SDOC_FORM01)
    Print programs - check package VD_PDF or package interface VDPDF_REL.

  • Do we change print program, if we resize the page in scripts

    Hi,
    My req is: There is a paragraph which is coming in two pages, but I want to show it only in a single page. So, I resized the page in layout set. but its working still, can we do something in our Print Program also, to get it done or resizing is the only way to accomplish this.
    Thanks
    -Sid
    "Max points are gaurenteed"

    Hi Sid,
    Use
    /: PROTECT
    /: ENDPROTECT
    can help you to print the paragraph in the same page without changing the print program or resizing the page.
    If this page protect attribute is set, then the complete paragraph is always printed on one page.
    Regards,
    Suruchi
    Message was edited by:
            Suruchi Mahajan

  • Customer balance confirmation

    Hi all,
    I have F.17 standard transaction code assigned to a Z program in SAP 6.0 which is very strange to me. All the company codes are assigned to the standard program SAPF130D. How can I run the program, with what transaction? I cannot assign a new transaction code to the standard program.
    Please give some advice.
    Thank you,
    Desimira

    Hi,
    You said you created a Z program for Z programs only we can create the Tcode on SE93,then if want to go for that  Zprogram report go to SE38(ABAP Report) & excute.
    Regards,
    Pramitha.
    Edited by: pramitha on Apr 7, 2011 12:33 PM

  • Printing balance confirmation for vendor & customer

    Hi Sapient
    I had defined a vendor & linked a customer in the vendor master & vice versa.
    I want to print the balance confirmation form for the vendor.
    My requirement is as follows
    1. When i print the confirmation form for the particular vendor & if had linked a customer to the vendor, then I wnat the open line item in the cusotmer account shoudl be included in my vendor balance confirmation form.
    Is the above said scenario is possible through SAP standard. If not can you provide me with alternate solution.
    Regards
    R.Karthigayan

    I presume you are using program SAPF130K  or F.18 for vendor balance confirmation. You cannot run statement of vendor balance including customer if they are vendor and customer.

Maybe you are looking for

  • Font Smoothing + Relative Positioning = Problem

    Hello, I ran across a strange inconsistency while designing a relative position based layout. My page has two divs, both relative positioned for height. They do not overlap. The page renders excellent in Firefox 3.5, and not bad in Chrome (though a l

  • How to send an email without attaching the form or the form data?

    I'm creating a form that will have an email button to send an allert that the form was filled out. So far I got it to work based on another example on this forum, but it is attaching the file to the email. I don't want that, all I need is to send an

  • Quicktime to Flash Conversion- No sound

    I have some videos that I edited in Sony Vegas that have been exported as QT movies. I just upgraded to QT Pro so I can convert to flash for a client who want to put the video's on their web site. I convert to FLC and the video works but there is no

  • Printing problems in Lion - Broken pipe

    I am having problems with printing from Lion, particularly to some HP printers in my office network.  I have tried removing and then adding the printers, have tried printing with JetDirect, as an IP, and just letting Lion decide.  The jobs seem to be

  • Wrong Com Port order with PXI - 8422 in a Win2k system

    While using my PXI-8422 on WinNT4.0 and NI serial driver ver 1.44 Ports were assigned com numbers top to down. ie Port1-COM1 , Port2-COM2 , ... However on win2k and NI serial driver ver 1.45 ports were assigned com numbers in the reverse order. ie Po