Change printer IP address

I have changed my router and the old network no longer exists.
When I try to connect the printer wirelessly it tells me that the network IP address is different from the the printer IP address.
I tried typing the printer IP address into my browser and was told that it didn't exist.
I uninstalled the printer and all HP programs and reinstalled with USB
I need to channge the printers IP address, but I can only connect with the printer over USB.
I'm stuck!

Hi,
Download and run HP Print and Scan Dr utility from link below which should help in resolving this issue.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Similar Messages

How do I change printer IP address

I reconfigured my network resulting in my printer IP address changing, but I don't want to delete the printer and reinstall it as I have pending jobs. Does anybody know how to

Did you select manual configuration?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Changing printer email address on hp photosmart all in one B

I have a HP Photosmart Plus B210 and a pc with windows 8.1 i wanted to scan with printer to pc but wouldnt connect to pc, since getting printer i have now changed my email address which is different to the one on the printer how do i change the email address on the printer, e-print tell me to go to settings menu option under wireless web srvice and settings and then disable then enable web services but i cannot find any of these settings on printer. All i can find is wireless setup which doesnt take me to where the printer email address is.
Thanks
Marj

Hi,
You will always have to use the claim code which was printed when registering the printer to web services.
You have to claim the printer within 24hrs.
If you have not done this in 24hrs, print the information sheet again, get the claim code and then claim it and change the email.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

Snow Leopard- How can I stop cupsd from restarting? Trying to edit printer IP addresses

I want to edit etc/cups/printers.conf to change printer IP addresses in Snow Leopard. I edit after "sudo killall -9 cupsd". cupsd restarts before I can finish the edit. How can I stop cupsd from restarting until I finish editing printer.conf?

You can try the following:
sudo launchctl unload /System/Library/LaunchDaemons/org.cups.cupsd.plist
Have you attempted to administer cups thru the web interface @ http://localhost:631 ?

How do I change the IP address on my 4000TN printer from 0.0.0.0

My 4000TN printer shows an IP address of 0.0.0.0 in the configuration menu. How do I change this IP address so that I can connect the printer to my Apple Airport Extreme Base Station for wireless printing?
This question was solved.
View Solution.

Did you select manual configuration?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Can i change my printer email address to one i can remember

how do I change my printer email address to one I can remember

Hi allieb2901,
You can customize your ePrint email address at ePrintCenter.com. After signing into the website, just click the change button next you your ePrint address in blue.
If you have not registered your printer at ePrintCenter.com, print out the ePrint information page that has the 3-step process, or if you need clarification please post again.
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

HP Officejet Pro K8600: change static IP address using printer control buttons

Our network was changed this morning and I am working with a different addressing scheme. I need to change the static address for our HP Officejet Pro K8600 which has no control panel on the printer. I had to do this once before and found instructions which (believe it or not) included something like pressing the paper feed button 23 times. It worked but now I can't find the instructions!!!! It's not something I can recreate because it was very specific. Does anyone have these instructions? I need them desperately.
Thanks.
This question was solved.
View Solution.

Still not what I needed but I did finally find what I was looking for. Clearly not found in any manual. Here it is for anyone else that is looking for the same info.
‎From a post on 11-25-2008 03:46 PM from KFMiles:
I really hope this helps you. Believe it or not there really is a reset for this printer.
I had put in a manual IP address and forgot one piece of data. Then I couldn't print to it or access it. Basically I was out of luck. I scoured the internet, I read the manual, I used the HP online help. No luck. Finally I broke down and called HP directly. Took us about 10 minutes of dialog and redoing everything I did before (patience here on my part). The tech disappeared for awhile and came back with a new step from the printer guru god for K8600. Seems if you enter the code number 230, the printer defaults are reset to the factory values.
Ahhh, you say what? There are only 3 buttons to press and no keypad. The X and the page button mean something besides print configuration (hold X) or print page demo (hold Page). Seems if you press and HOLD the power button, the X changes to a unit code factor of 10, and the page button changes to a code factor of one. DO NOT do this code with the network cable plugged in I am told by HP .. so read on...To enter 230, press and hold the power button (light goes off but unit stays on), then press the X button 23 times, Let them both loose. Wait about 20 seconds, and print yourself out a configuration page (by holding X until printer starts working to print). You should see that your net numbers are blank. This will be normal with the network cable unplugged. Plug the network cable back in and wait about 30 seconds, by this time the router will have assigned a new IP. Print out your configuration again. Whatever you got is your new number until you reassign it by using the webserver. This new IP address is your ticket to this server.
This makes you wonder what other codes are there that we don't know about.

How to change the hardware address (MAC) of my printer to match my mac

how to change the hardware address (MAC) of my printer to match my mac

Hello @giomarcondes ,
Welcome to the HP Support Forums!
I understand that you wish to alter the MAC address on your HP Deskjet Ink Advantage 3525 e-All-in-One Printer to match the MAC address of your Mac OS X computer. Unfortunately, what you're requesting is not supported. Just to clarify, "a media access control address (MAC address) is a unique identifier assigned to network interfaces for communications on the physical network segment". They are programmed into the device and are not designed to be changed. (Source: MAC address)
Are you experiencing issues configuring your HP Deskjet on your wireless network to communicate with your Mac computer?
If you do actually require support configuring the wifi connection on your printer I would be more than happy to assist you with this. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

How do I reset to default or change static IP address on HP Officejet Pro 8600 Premium printer?

How do I reset setting to default or change static IP address on HP Officejet Pro 8600 Premium printer?

Hi,Tap the right arrow and then tap the Setup icon.Tap the Network option and select Restore Network Defaults.Confirm any prompt to restore the default network settings, it will remove any manual IP configuration. If you are wirelessly connected to the network, select Wireless Setup Wizard and select your network to reconnect the printer wirelessly. Regards,Shlomi

How change a printer IP address after installing OSX 10.6.8 on MacBook

I just installed OSX 10.6.8 on my MacBook and I need to change my printer's IP address. How do I change it?

Why do you think you need to change the IP address on the printer? Is the Mac using the same IP address or is it set to use a different IP address range (subnet)?
If the printer is connecting to a router then it most likely is obtaining its IP address (known as DHCP) from the router, which the Mac would also be doing by default. And if the printer is set to DHCP, turning it off for several minutes is sometimes enough for it to acquire a new IP address when it is turned back on.
If the printer has a static IP address set then it is often possible to change the IP address via the keyboard of the printer. If you can tell us what make and model you have, then someone who has this model can reply with the steps or we can refer to the manual for this model and provide you with the steps to take.

Cannot print from Address Book! Print freezes and will not proceed.

I want to print an address list for Christmas cards. When I select the Group, select all and select Print I get the option box. I then select my printer and use the down arrow to open the dialog box that shows I am printing from Address Book and gives the different forms I can use (ie list, label, envelope) as well as the fields to include in the list. Once I have everything selected I click the Print radio button. All of the information under the Address Book options line disappears. Print remains highlighted and my printer Que never opens or appears. If I manually open the printer there is no print job showing. At this point the Address Book application is frozen. I cannot select cancel on the print dialog box (I can click it, but it does not highlight and it does not close the dialog box! In order to get out of this situation I have had to close Address Book. The quit option on the menu does work and Force Quit is unnecessary.
I actually spoke with AppleCare on this issue on Friday 05 Dec 2008. The tech I spoke with knew of no other such situations, but when I started checking on this discussion page I see a posting from REECO from clear back on 24 Sept 2008. His posting can be found at http://discussions.apple.com/message.jspa?messageID=8161605&tstart=0
The technician had me do several things. One was to pull my Caches folder out of my system Library folder. He also had me remove some Address Book preference items. The end result of these actions was a Mac Pro that would not boot! (The failure followed an Address Book crash with a "KERPROTECTIONFAILURE" and the message that some QualityMedia plugin might have created the problem!)(I could find no such plug in either on my system or via Google search!) The tech had asked me to boot to safe mode by booting while holding down the shift key untill the spinning gear appeared. The machine never progressed to a successful boot! I ended up having to use a 2nd hard drive and physically place it in internal slot 1 on my Mac Pro proceeding to reinstall Tiger! The bad news is that this did NOT solve my printing problem.
If I am attempting to print from a new install with just the Apple address card and the Owner's card in Address book the print proceeds fine. Once I import my data I am back to the same print failure.
Some diagnostic steps I have tried. I have tried USB local printers and bonjour printers. I have used Epson and Canon printers. I have tried to print to a PDF. I have tried printing from another computer (12 inch PowerBook) with identical results!
At this point I am going to call AppleCare Monday morning and see if anyone there has any more suggestions. Any suggestions this forum has will be received gratefully!

I was having the same crash or "just not print" problem as seen in other posts. I was able to fix it however, by making changes in some of the address cards I was going to print. By editing the "parent", "child", "spouse" fields which will get added to the name line of the label, I was able to get labels to print (or pdf preview) without difficulty.
I did not try and determine exactly what the problem was, but basically did a data cleanup. Since I didn't know that those fields would print, I had previously included information beyond just a name in the fields, like birthdates and such, eg. "Jimmy - 12/1/05". After either removing the fields entirely where I didn't really need them, or just cleaning them down to names only, they printed just fine. I'd considered trying to disable the feature entirely but the data cleanup was not hard for a dozen or so names.

How can I change my IP address on my iPad Air 2?

I am trying to AirPrint to an Epson WF3620, which is compatible with AirPrint. My printer shows one IP address and my iPad shows something different. How do I change the ip address on my ipad? Better yet, how can I get my iPad Air2 to print wirelessly? Epson Tech support is totally useless. Thanks in advance for your help!!
Vita

Your printer should have a different IP address than your iPad. That's how your router knows where to send info. You shouldn't need to change any IP addresses.
As far as the printer goes make sure you followed the setup process exactly as described by Epson. As long as the printer is connected to the same Wi-Fi network as your iPad the iPad should be able to print to it.
About AirPrint - Apple Support

How can I print an address card?

Hi Folks,
I've just discovered what seems like a ridiculous limitation of Address Book. I am having a hard time believing this is so, and am sure there must be a way to do this.
I need to print out an address card, as it appears in the Address Book. I want all info, including the notes.
I can't find a way to do it. I figured out I can print a list, an envelope layout, an address card (with some info), and perhaps one other option.
Would someone kindly tell me how I can simply print an address book card? It won't even let me select a whole card for copy/paste to elsewhere for printing.
For now I have resorted to copying the card from Google Contacts, to which I have Address Book sync'ed. I then pasted that data into a new email and printed the email (in Mail). I could have used Word, etc..
Is there an easier way? If not from within Mac, is there a small app that makes the data in my address book more readily converted into ink and paper? I have looked on Google for the past 25 minutes and found nothing.
Any tips greatly appreciated.
With thanks,
Jonathan

Thanks TeenTitan,
I had not realised the List style would allow all that.
This works. The layout is not ideal because it puts everything into columns across the page, but it is better than nothing... and easier than going via my Google Contacts sync.
Are these styles editable? Is there a template hiding away somewhere in the far reaches of my OS that I could fiddle with to change the layout or make a new style? Would love to know.
Cheers,
Jonathan

How can I change the email address for my photosmart 5520 ?

Hi , I have a photosmart 5520 and tried to set up an email address for my printer when I installed the printer. At the time. the HP site was down for maintanence and I have a very long an complicated email address now that I will never ever remember. How can I change this email address?
Thanks in advance.
Amy

Hi Amy,
Follow the steps listed below to customize the ePrint email address:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02940150&cc=us&dlc=en&lc=en&product=5157536&tmp...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How can I print my address book on to envelopes?

I used to be able to print addresses from my contact list on envelopes now I can't even print the addresses in a group on one page, just their phone numbers appear. I just changed over to icloud. Is this the problem?

I also need to know how to properly print business envelopes from Contact. The MacWorld page online on this is no help.
I am getting: 1. The first one-third of my return address cut off (too far left, and even when moved right still cut off)
2. The person's name in the address appearing on Line 2 Under the business name rather than on Line 1 above it.
Just one of the many glitches I am suffering since updating my iMac to Mt. Lion...

Change printer IP address

Similar Messages

Maybe you are looking for