Change printing defaults to print a individual slides and not have a border
It is annoying to always have to choose individual slides and turn the border off while printing. Is there a way to change this default so it is always that way?
801878 wrote:
1. Is there a way that print(...) method of Printable interface can send ASCII character and not graphics rendering?Not that I know of, but note that you can use the Graphics.setFont(Font) method on your Graphics/Graphics2D to cause the printing to use whatever font (or combination of fonts) you want.
Similar Messages
-
Adding music to more than one slide and not the entire presentation
I love the way Keynote looks and behaves, but it fails to compete with PPT on certain aspects, such as adding the same audio track to more than one slide and NOT have it play for the entire presentation. Using PPT (and I hate PCs!) you can have a track play for "n" number of slides. I'm frustrated that I cannot do this with Keynote! I don't want the track as a soundtrack for the entire presentation. I want to add another audio track to, say, the last two or three slides only and something else for all the other slides. I looked through the user manual, forums, etc. and found that I can only add a soundtrack to the entire thing or a different audio to only one slide.
Question: What if I cut (that last two slides) and paste the the slides as a new Presentation with its own soundtrack, then reincorporate that back and paste it into the original presentation? Will that work or will the original soundtrack take over the entire presentation again?Anyone remember Claris Works for Mac back in the early 90s? Now, that was a gem! What were they thinking when they got rid of that one (and replaced it with AppleWorks!)?
Good point, but one which Apple has heard a zillion times, and so sadly chosen to ignore. The really heartbroken among us remember AppleWorks from the mid-'80's, the world's first integrated suite, then ClarisWorks, then AppleWorks; and, of course, Beagle Bros. and BeagleWorks. But since we old f*s are dying off, those complaints will eventually stop. +Sic transit gloria mundi.+ -
How do I change the default locations for the iTunes music and iPhone back-up folders?
My computer's hard drive is partitioned, with one partition having all of the Windows system files, and the other having all of my documents, music, videos, etc. When I installed iTunes, it automatically created its music and iPhone folders on the Windows partition. I've been able to change the default save folders for other programs to the second partition, but I'm having troubles finding this option in iTunes (I even went back and re-installed it to see if I could find it that way, but no dice). Is there a way to change the default folders for the iTunes library and iPhone files? It takes up A LOT of space on my Windows partition, so it would be very great to get that moved over.
Thanks!You can't selectively move individual folders withing the iTunes folder, but you can move the entire folder to, say, an external dive. To delink the iTunes application to the new library location:
Open iTunes while holding down the Option key (Mac) or Shift key (Windows).
In the resulting dialog, click the Choose Library button.
Select the iTunes folder you moved to the external hard drive.
Click Choose (Mac OS X) or Open (Windows) and then choose the iTunes Library file inside . -
Why can I print from my iPhone and not my iPad? I have been able to do it in the past. I have tried a hard reset but it still cannot find the printer.
In addition to rebooting the router and the iPad, I would reset the printer as well. Unplug the printer from power and do the same with the router. Leave the router unplugged for about 30 seconds. Plug the router in first and let it totally start up, plug the printer in again, and then reboot/reset the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
If that doesn't work, you can try resetting all settings. Settings>General>Reset>Reset All Settings. You will have to enter all of your device settings again.... All of the settings in the settings app will have to be re-entered. Your WiFi passwords, location services, device preferences all have to be re-entered. You will not lose any data or media whatsoever. -
SBS 2011 GPO for changing the default save path applying to Win7 but not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
Thanks in advance.When a group policy is not applying, it is often that it has been linked to the wrong OU. Please first check this.
You might also check the apply status on the client site based on the GPSVC.log.
How to enable GPO logging:
http://blogs.technet.com/b/csstwplatform/archive/2010/11/09/how-to-enable-gpo-logging-on-windows-7-2008-r2.aspx
It looks more like an issue on server side than an issue of Office Group Policy settings. Try to post in Server forum and see if there is any luck:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver -
SBS 2011 GPO for changing the default save location for Word/Excel 2013 not working
So this is a strange one. I've got an SBS 2011 server that's the only domain controller in the org. I've created a GPO to change the default save location for Excel 2013 and Word 2013 using the Office 2013 ADMX files which were installed to the PolicyDefinitions
folder.
The GPO (U-Office2013 Default Save Location) only contains:
1. User Configuration - Microsoft Excel 2013/Excel Options/Save - Default file location - Enabled - Z:\
2. User Configuration - Microsoft Word 2013/Word Options/Advanced/File Locations - Default file location - Enabled - Z:\
The GPO is linked at the OU that contains my users for my SBS organization.
When I do a gpupdate /force on a windows 7 system with office2013 installed, and then run a gpresult/rsop, the policy appears to be applied successfully as it lists my GPO under the Applied GPOs list on the workstation:
Applied GPOs
Default Domain Policy dyndns.local AD (24), Sysvol (24)
U-Office2013 Default Save Location domain.local/SBSusers AD (6), Sysvol (6)
In the gpresult report, the applied settings appear under:
Administrative Templates
Extra Registry Settings
software\policies\microsoft\office\15.0\excel\options\defaultpath Z:\ U-Office2013 Default Save Location
software\policies\microsoft\office\15.0\word\options\doc-path Z:\ U-Office2013 Default Save Location
BUT, when I go to the workstation, and check office->options-Save-default file path, the path has not been changed to what the GPO is pushing.
The strange thing is that in my test environment running 2008R2 server and Win7 with Office 2013 and identical settings the default save location is applied and works as expected.
Any ideas?
I've already tried re-installing the ADMX templates and re-created the GPO's several times.
I should also note that other GPO's on the SBS2011 server such as the folder redirection GPO work as expected on the same windows 7 system. It just appears to be an issue with the default save location in office2013 and other Office 2013 related GPOs which
utilize the recently added ADMX template that don't seem to be working for me.
Thanks in advance.Hi Justin,
Thanks for your reply. I have tried several different user accounts (all have local admin privileges to the workstation) with the same issue. The default save path does not get applied from the GPO to any of the users i've tried. Here's the steps I took
per your suggestion:
1. log on as a user who has never logged onto the workstation before.
2. run gpupdate /force (entered y for yes when prompted to log off).
3. Log back in as the user and open Office and check the default save path. It has not been changed to match the GPO setting.
4. Check rsop to see if the policy was applied. Rsop states the gpo was applied successfully.
I have attached the gpsvc.log file from a the session described above. The GPO Guid in question is: {DC3C93EC-7C28-48E9-BA38-FCA1E275A207}. Its common name is: U-Word 2013 Default Save Location. It's only setting is:
Policies\Administrative Templates\Policy definitions(admx files retrieved from central store\Microsoft Word 2013\Word Options\Advanced\File Locations\Default File Location = Enabled\Documents = F:\
-------gpsvc.log sections containing the aforementioned GUID start---------
GPSVC(410.1730) 09:10:51:186 ProcessGPO: ==============================
GPSVC(410.df0) 09:10:51:186 GetGPOInfo: ********************************
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Searching <cn={DC3C93EC-7C28-48E9-BA38-FCA1E275A207},cn=policies,cn=system,DC=gc,DC=local>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: User has access to this GPO.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: GPO passes the filter check.
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found functionality version of: 2
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found file system path of: <\\gc.local\SysVol\gc.local\Policies\{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found common name of: <{DC3C93EC-7C28-48E9-BA38-FCA1E275A207}>
GPSVC(410.1730) 09:10:51:186 ProcessGPO: Found display name of: <U-Word 2013 Default Save Location>
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found user version of: GPC is 3, GPT is 3
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found flags of: 0
GPSVC(410.1730) 09:10:51:191 ProcessGPO: Found extensions: [{35378EAC-683F-11D2-A89A-00C04FBBCFA2}{D02B1F73-3407-48AE-BA88-E8213C6761F1}]
GPSVC(410.1730) 09:10:51:191 ProcessGPO: ==============================
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: Local GPO's gpt.ini is not accessible, assuming default state.
GPSVC(410.1730) 09:10:51:191 ProcessLocalGPO: GPO Local Group Policy doesn't contain any data since the version number is 0. It will be skipped.
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: Leaving with 1
GPSVC(410.1730) 09:10:51:191 GetGPOInfo: ********************************
-------gpsvc.log start---------
-------output of gpresult /r-------
Microsoft (R) Windows (R) Operating System Group Policy Result tool v2.0
Copyright (C) Microsoft Corp. 1981-2001
Created On 5/30/2014 at 9:24:08 AM
RSOP data for GC\ssanders on OPTI9020-01 : Logging Mode
OS Configuration: Member Workstation
OS Version: 6.1.7601
Site Name: Default-First-Site-Name
Roaming Profile: N/A
Local Profile: C:\Users\ssanders
Connected over a slow link?: No
COMPUTER SETTINGS
CN=OPTI9020-01,OU=SBSComputers,OU=Computers,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:10:47 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS CSE Policy
Windows SBS Client - Windows Vista Policy
Windows SBS Client Policy
Update Services Client Computers Policy
C-Create Syntiro Root Folders
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
Windows SBS Client - Windows XP Policy
Filtering: Denied (WMI Filter)
WMI Filter: Windows SBS Client - Windows XP
The computer is a part of the following security groups
BUILTIN\Administrators
Everyone
BUILTIN\Users
NT AUTHORITY\NETWORK
NT AUTHORITY\Authenticated Users
This Organization
OPTI9020-01$
Domain Computers
System Mandatory Level
USER SETTINGS
CN=Stephen Sanders,OU=SBSUsers,OU=Users,OU=MyBusiness,DC=gc,DC=local
Last time Group Policy was applied: 5/30/2014 at 9:13:17 AM
Group Policy was applied from: GCSBS.gc.local
Group Policy slow link threshold: 500 kbps
Domain Name: GC
Domain Type: Windows 2000
Applied Group Policy Objects
Windows SBS User Policy
Windows SBS CSE Policy
Small Business Server Folder Redirection Policy
U-Word 2013 Default Save Location
U-Office 2013 Disable Backstage
U-Office Disable Start Screen
U-Office Trust Center Settings
U-Word Autorecover Location
U-Word Autosave Interval
U-Word Disable Capitalization First Word
U-Word Set Arial Default Font
U-Word UI Customizations
U-Power Plan Settings
Default Domain Policy
The following GPOs were not applied because they were filtered out
Local Group Policy
Filtering: Not Applied (Empty)
The user is a part of the following security groups
Domain Users
Everyone
BUILTIN\Administrators
BUILTIN\Users
NT AUTHORITY\INTERACTIVE
CONSOLE LOGON
NT AUTHORITY\Authenticated Users
This Organization
LOCAL
Windows SBS Link Users
Windows SBS Fax Users
Windows SBS SharePoint_MembersGroup
Windows SBS Folder Redirection Accounts
Windows SBS Remote Web Workplace Users
High Mandatory Level
-------end gpresult output-------
Thanks in advance for any help. I also have a pps ticket open with Microsoft, but they're dragging their feet. -
How can I change the default pdf reader from the installed (but not yet registered) Adobe Acrobat 9 Pro to Adobe Reader XI? I'm having some hiccups getting Adobe to register the software, but since I set it as the default .pdf reader during setup, things try (and fail) to open in the as yet unregistered software. How can I change it temporariiy to the Acrobat Reader XI that I have installed?
Anubha,
It worked! Thank you so much.
I'd opened file with the 'Open with' feature then clicking Adobe Reader,
but that didn't do it. When I used 'Open with', then 'Choose default
program...', it worked like a charm.
Again, thank you!
Jonathan
On Wed, Mar 18, 2015 at 10:16 PM, Anubha Goel <[email protected]> -
How do you print an email attachment and not the email itself. please.
how do you print an email attachment and not the email itself. please.
This question was solved.
View Solution.Hi there, if there is text in the body of the email it will print automatically when sent to an ePrint email address. The only way to just have the attachment print is for there to be no text in the email body.
Hope that helps answer your question.
If my reply helped you, feel free to click on the Kudos button (hover over the "thumbs up").
If my reply solved your problem please click on the Accepted Solution button so other Forum users may benefit from viewing the post.
I am an HP employee. -
I want to set up my spreadsheet to display two digits to the right of the decimal point, even if zeros, and not have to do it for each individual cell.
Select all the cells you want formatted that way (or the entire table if that's what you want)
Open the cell inspector
Set the format to "number" with 2 decimal places -
how do i change my old ipod for a new one but keep my music on i tunes and not have to reload it
Ok me again I once changed one ipod classic for another ipod classic on the same laptop , all my music on iTunes (300 CDs) where still there but could not be found by iTunes to load on to the new ipod , I had to load every CD again to solve , should I have reset the first ipod or something?
-
How do I get a longer list of items in the history window - and not have to click "Show All History"? The default list is too short.
Well I figured it out… all you do say show commands :-/
-
Has anybody ever had their security questions changed and not have the answers?
Has anybody ever had their security questions changed and not have the answers for an ipod touch? I cannnot buy music or access my itunes account now. Thank you for any help or direction. Phone support and apple express was a deadend.
See Kappy's previous discussion.
HT5312 How to recover security...: Apple Support Communities -
hey guys, iv recently changed over from the 4 to the 5 and i have lost my 5. Luckily a few days ago i downloaded find my iPhone but when i log in it tracks my old phone and not the new one. I have logged in so i dont know why it wont connect. I'm really upset about lossing it, if anyone one knows how to fix the problem or another way of tracking my phone that would be great.
The iphone 5 can only be located if connected to a data or mobile network. If in Airplane mode or switched off, it can't be found.
Check this article for more info:
iCloud: Troubleshooting the Find My iPhone app -
My account asks me to change my password every week for no reason and i have different security questions for the same account
Does the iPod connect to other networks?
Does the iPod see the network?
Any error messages?
Do other devices now connect?
Did the iPod connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Try changing the security on the router. Start with no securty as a test.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I accidentally changed a setting so every time I open a jpeg photo, adobe reader pops up and says it's not compatible. I just want to be able to open a jpeg normally and not have adobe open.
Hi Lhughes0,
Try these steps:
1. Select the .jpeg file
2. Right click on that file and on context menu go to the last option which says "Properties"
3. Now you will see the option where you change the program to use for opening your file
4. Instead of Adobe Reader select Windows Photo there.
5. Apply and say OK to it
Give it a try
Maybe you are looking for
-
How to transfer single device from one iTunes account to new iTunes account on another computer?
I have been successfully using a single iTunes account to sync & back-up two different iPhones. One of those iPhones belongs to a now ex-boyfriend (no longer living with me), and naturally he would like to transfer the back-up data for his device to
-
What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?
Hi All, What are the commands using in SAP ECC 6.0 ehp on SYBASE Database? Backup and restore commands?
-
Problem with camera raw for Sony 350K and PSE 6
I have recently tried to download my first batch of RAW pictures taken with a Sony A350K camera into PSE6 but I am told the format is not recognised. I thought I had successfully down loaded ACR 4.6 but apparently not as they are still not recognis
-
Convert to use on Ipod - takes FOREVER!!!!!
I have a very fast computer with 2G of ram. However it is taking at least 2.5 hours to convert a 25min Twilight Zone episode for usage on my Ipod. I was converting all night and I only converted 6 shows. this is too slow what you are trying to put a
-
Can anybody tell me what is wrong with this code. The following error message is shown at the compile time. local variable l is accessed from within inner class; needs to be declared final How can I fix it. import javax.swing.*; import java.awt.event