Change printing order of Artboards.

Hello everyone...
So here is they short story. I created a multiple artboard document. Designed my pieces. Decided to add an artboard to the middle. Added it and made my creation... Not realizing it was assigned the last artboard number in the series.
Is there any way to change that number so that they print out in the order I want. I am making pdf files of my work and they aren't in the right order.
Any help would be appreciated.
Thanks,
Wade

No one is going to like this but there might be a way I did not try it but here goes and I do have like many other users a feature request entered for renumbering and naming artboards, as well as an artboard manager.
Create a new document with the exact number of pages you finally ended up with, command A, Command C and finally Command F or B.
That is copy all the art from the original document to a new one.

Similar Messages

  • Change print order when printing multiple photos

    Hi,
    I am printing multiple duplex pages in Photoshop Elements 6 but cannot get them to print in the correct order.
    Can anyone help me?
    Tracey

    You can also create a package from scratch in the editor: create a blank file the size you want, make sure it and your photos have the same resolution, then copy/paste your photos into it. Each one will come in on a new layer and you can use the move tool to arrange them.

  • Changing the order for printing portfolio files in adobe acrobat 9 pro

    Does anyone know how to change the order for printing pdf files that are part of a portfolio in adobe acrobat 9 pro?  The documentation seems to say that it prints files alphabetically by filename rather than by the internal sort order.  This won't work for me. Any ideas? Thanks.

    Question1: No.
    Question2: No.

  • Print out of Change Purchase Order

    Dear All,
    Could u please tell me how can i get the Chnage to Purchase order Print?
    As far as my knowldge we have to go to ME22n & then message then select the output type but after doing all this i am unable to get the print out with Change to Purchase order written on PO.
    Please co-operate me

    Hi
    Pl goto -
    > OLME -
    > Messages -
    > Output Control -
    > Message Types -
    >Define message types for PO -
    > Fine Tune control for PO -
    >Pl. check For your Message type, you maintained Change Print Option Control( ie.2 )...other wise maintain
    I think your problem may be solved...
    Reward if useful
    Regards
    S.Baskaran

  • I want to change Purchase Order Print

    I want to change Purchase Order Print. I want to add the name who has done last change in Purchase Order. Please help.

    You no need to add the changes, It can be shown in Environment menu. If u want to see the person who changed the PO in ur Print, ABAP work will be required..
    By the way what is the business requirement for this. B'cas PO is meant for vendor, Why do u want to print, whoever did the changes..This thing you can see from SAP itself at anytime.
    Cheers!
    ***Reward If useful (RIU)

  • HT3412 how do i change the sizing of my photo prints order to inches?

    How can I change to custom photo size photos to order prints and how do i change from cm to inches for photo size in the print order?

    In the System/Language & Region/Advanced/General preference pane:
    OT

  • HP 8600 911g - connected to Imac 24; Maverick OS; how to change pages printing order

    HP 8600 911g - connected to Imac 24; Maverick OS; how does one change pages printing order

    Hi Dave 6373,
    I understand you have an Officejet 8600 that you're using with 10.9 and would like to know how to change the order the pages print in. I will do my best to assist you in resolving this issue!
    From my browsing our 10.9 Mac I was able to find the setting I believe you are looking for. You will want to open the program/document you're printing with and select File and Print. You will then see a screen similar to the one in the screen shot below. You'll want to select Paper Handling and then under page order change it as you wish. You can also save this as a preset by clicking where it says Default settings (next to Presets: ) and choosing the Save option.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • Changing album order when printing in mosaic

    Is there a way to change the order album artwork appears when using mosaic as a print option? I can't see that the order they're arranged correlates to anything.

    You can't change the order of the photos in the built in photos app. There are other apps that give you much more flexibility than what the photos app allows. You may want to do a search in the App Store for one that suits your needs.
    Read this to learn about the photo sorting order on the iPad. The gist of the article is this .... Copied from the article.
    By default, photos sort according to the date modified (in ascending order).
    http://support.apple.com/kb/HT4221
    An app that you can look at....
    https://itunes.apple.com/us/app/photo-manager-pro/id393858562?mt=8

  • Changing the order that pages print

    how do i change the order that document pages print? I want to print the last page first.
    This question was solved.
    View Solution.

    Please read this post then provide some details.  What printer model? What operating system? What program are you printing from?
    There are generally two places that page order can be set, but this will depend on the printer model, operating system and program.  The first would be in the print options of the driver.  Click on the Advanced tab and look for "page order".  The other option would be that some applications allow selection of page order as an option.  For example, in Word 2010 this would be found in File, Options, Advanced, Print, Print pages in reverse order.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Changing the print order for payroll checks and payroll deposit advices

    Hello,
    How do you change the print order of payroll checks and deposit advices?
    Thanks
    RW

    Hi there crazytalk,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using and what program are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Printing issues i'm not able to change the print order it always prints back to front.

    I have an HP Pavilion  model p6112p. Operating System is Vista Home Premium 64-bit, with an HP Deskjet Printer Model 6980.
    The issue is I am unable to change the printing order of multiple page printing, they print from back to front on everything that I print, even my Quicken Checks, print back to front. I am unable to resolve this issue. HELP!!!! 

    I changed the code a bit. I removed the graph and replaced it by a value, the same error occured.
    How to reproduce:
    1) Exit LabVIEW completely (VERY IMPORTANT)
    2) Open and run the attached VI
    3) change the value of the 'value'-control to eg. 2.2 by typing in the value.
    4) press on the print button
    5) try to change the value of the 'value'-control to eg. 5.0 by typing in the value. This is NOT possible.
    Changing the value with the arrows is possible.
    6) stop the VI.
    7) restart and no problem will occure.
    8) Completely exit LV, restart the VI (and LV), the same error appears again after having printing the front panel.
    I notice this only with LV 6.0.2. With LV 6.1 it seems to work fine.
    Attachments:
    PRINTfp.vi ‏28 KB

  • Frames on reports (changing the order of printing)

    Hi OTN,
    I have 2 frames: frame1 and frame2.
    I build a report in a way that frame1 appears first and then frame2.
    What I want is to inverse the order of the frames(frame2 appears and then frame1) without rebuilding my report.
    Thank u in advance

    HI THERE
    I DONT THINK IT IS POSSIBLE 2 CHANGE THE ORDER OF FRAMES AS SUCH PROBBLY BY LOGICALLY
    SOLVING I THINK IT CAN BE WORKED OUT .PLEASE SEND ME THE PROBLEM IN DETAIL

  • Questions on default print quality and print order

    I recently upgraded to CS 5.5, a clean install on a new Mac running 10.7. I've found two issues regarding printing from both Acrobat and InDesign:
    In both programs, if I go directly to print (command-P, then hit OK without changing settings), documents will print at my printer's default setting, which is for a high-quality photo on glossy paper. (I haven't figured out yet how to change that default.) I want it to print to my faster standard quality  setting, which is generally also the "last-used" setting. I can of course go into printer settings to fix -- each time I do that, my standard setting is already set in that window -- but I have to make that move every time I print.
    Previous versions of both programs (CS3) automatically went into the last-used or standard setting. How can I get that back?
    Also, print order hasn't been working as it did in CS3. Documents print first-page-first in CS 5.5, unless I check "Reverse order"; in CS3, docs printed last-page-first automatically, without checking any additional box, making documents easier to collate. Also, on many documents, "Odd pages only" prints the even ones, and vice-versa.
    How can I get the automatic reverse order and correct odd/even back in Indesign 5.5 and Acrobat X Pro?

    Hi Davis,
    Well, if you are able to log on the BPS application (thus, a Web Interface if I'm not mistaken) then it means that some user is logged on the ABAP-side. It is either a "personal" user or a technical (common) user, that is used for anonymous access.
    You will certainly be able to track down this user with the SM04 transaction.
    You should be able to add a button to the BPS page. One idea would be to call an URL with an ICF service behind that will be able to process the parameters contained in this URL.
    It will be this very ICF service that will call the BAPI.
    Try these links
    http://help.sap.com/saphelp_nw04s/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ea8db790-0201-0010-af98-de15b6c1ee1a
    Hope this helps.
    Best regards,
    Guillaume

  • Importing data for tuple changes the order from source file - please help

    Hi all:
    I am using MDM 7.1 with the new tuple functionality. I have to import some product texts in a specific order. Tuples is working fine, the only issue is that it changes the order of the rows when importing from Excel.  Let's say I have product number
    A123, Text 1
    A123, Text 2
    A123, Text 3
    When importing in MDM I get:
    A123, Text 2
    A123, text 3
    A123, Text 1
    It is changing the order in which records are from source Excel file. Any ideas on how to force it to import in the same order as source file?
    Thanks,
    -Arturo Blasi.

    import java.util.*;
    import java.io.*;
    Student Name: Qiang Wu
    Student Number: 205722913
    public class Check05C
         public static void main(String[] args) throws IOException
              Scanner input = new Scanner(System.in);
              PrintStream output = System.out;
              output.print("Please enter filename...");
              File MarkFile = new File(input.nextLine());
              Scanner fileinput = new Scanner(MarkFile);
              double average;
              int maxmark = 0;
              int minmark = 100;
              int sum = 0;
              for (int score = fileinput.nextInt(); fileinput.hasNextInt(); score = fileinput.nextInt())
                   sum = sum + score;
                   if (score >= maxmark)
                        maxmark = score;
                   else if (score <= minmark)
                        minmark = score;
              average = (maxmark + minmark) / 2;
              output.println("Class Average is: " + average);
              output.println("Maximum mark is: " + maxmark);
              output.println("Minimum mark is: " + minmark);
              fileinput.close();
    }: ) I still cant figure out how to modify.

  • I want to change normal order into expire order

    Hi,
    I am oracle apps developer working in istore 11i module and i new to this forum.My question is i need to change normal order into expire order for this what are all the profile i need change .Please guide me
    Thanks in advance.
    DV.Balaji

    You no need to add the changes, It can be shown in Environment menu. If u want to see the person who changed the PO in ur Print, ABAP work will be required..
    By the way what is the business requirement for this. B'cas PO is meant for vendor, Why do u want to print, whoever did the changes..This thing you can see from SAP itself at anytime.
    Cheers!
    ***Reward If useful (RIU)

Maybe you are looking for