Change Profile

hi,
i made some changes to the Change profile..(PS0001 network general)
however i cant seem to find where the change profile is assigned.
i assumed it is assigned to a network type of network profile but i didnt find any field for it..
so where in the system do you assign the change profile?
thanks in advance..

Hi,
This link it may help you.
Define Change Profile
Regards
Chandra

Similar Messages

  • [solved]script fails when changing profile through powerdevil.

    i use ondemand governor and i want to change up_threshold value.
    Whenever i change profile through powerdevil up_threshold gets its default vaule of 80.
    what i did was to create a script named threshold containing the lines:
    #!/bin/bash
    sudo sh -c 'echo 50 > /sys/devices/system/cpu/cpu0/cpufreq/ondemand/up_threshold'
    i have also set through /etc/sudoers that this script is passwordless for my user.
    if i run the script, it successfully changes the value. It also runs successfully if i put it in startup.
    My problem is that it fails to run when i choose it to run when a profile loads through powerdevil. I am refering to the feature shown below :
    at first i thought that this function has a problem. so i chose to run kate, and when i changed profile, kate started immediately. So i guess that there is a problem with my script.
    Any ideas?
    Last edited by mechmg93 (2009-10-20 20:14:30)

    I hope someone reads this thread also its already marked as solved...
    Anyway, i would like to use CPU frequency scaling, but in the powermanagement settings,
    i cant shoose anything for frequency scaling.
    What do i have to do to be able to set "ondemand" or "always lowest frequency"?
    Wich daemons and/or modules do i have to activate to change the frequency policy?
    Would be very nice if someone could help me.

  • Unable to change profiles on Express

    I have both an AirPort Extreme and an Express. I have the Extreme as my base station and my Express configured to join my network to stream AirTunes on my stereo. This setup works fine, but I want to take my Express to my parents' house and use it as a base station there and be able to use my laptop wirelessly. I created two profiles, one for home and one for at my parents. The home profile includes the join existing wireless network option, the parents profile creates a wireless network. I created the profiles while at home, took the Express over to my parents and jacked in to their router. AAU did not recognize the Express. The yellow light just kept blinking. I did a reset on it and went through setting it up using AirPort Setup Utility. Worked fine, profile was still there. Went home and AAU didn't recognize Express again. Hard reset, etc.,etc. I was under the impression that by simply plugging in the Express that AAU would see the Express, I would select it, click configure, and select my profile. It doesn't seem to work like that. I even tried connecting some CAT5 cable between my PowerBook and the ethernet connection on the Express to no avail. How are you supposed to change profiles for different locations?
    PowerBook G4, Blue and White G3>4   Mac OS X (10.4.4)  

    The problem is that client mode on the Express turns
    off the access point functionality so that you cannot
    connect to it. It's a necessary consequence of a
    device that's as versatile as the Airport Express.
    Hmm. Unfortunately I guess that makes sense (and would explain why plugging in with an ethernet cable didn't even get me access). So the only way to get around a reset is to change the profile prior to pulling the AX off the network it's a client of? Makes sense, but still seems like an unresolved design problem.
    The upside though, if I do a bit of infering from what you've suggested, is that the AX (currently running as Remote) may switch to Client automatically when I get back to my other location. If it does, then at least one pre-emptive switch declaration is eliminated. One could hope.

  • Define Change Profile

    Hello Gurus,
    I have a problem when I define change Profile for a network type.
    I made these steps:
    - I created a New Change Profile with T-code OPSG, setting an error message when I delete material component by realised activity
    - I inserted this profile in my network type
    - I created a new network using my network profile linked network type
    Why the deleted of the network's activity, the system doesn't give me any error message?
    Thanks
    Nicola

    Change Profile is used in PS only for configurable networks.
    Refer below link for details on network configuration process in PS.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/4c/225f8146e611d189470000e829fbbd/content.htm
    Regards
    Sreenivas

  • Facebook change profile pic from app

    Please answer me..
    How do i change my profile pic from fb app?

    I think only iphone doesnt have that "change profile picture" option on the app..
    This isnt fb problem.. Its iphone! Let me ask you can u even change your prof pic on the app? Ill give you 100$ right now if u can bro

  • Increase Performance without changing  profile parameter

    Hi folks,
    How to Increase the Performance without changing  profile parameter ?

    One of the easiest ways to gain some performance is to turn off any unnecessary services running on the server. Depending on the platform, you can gain some memory by just removing these (turn off sendmail or postfix if you are not sending any messages [monitoring or otherwise]).
    J. Haynes
    Denver, CO

  • N95 shortcut to change profile

    Hi,
    does anyone know of a shortcut to change profile (ring tone - to vibrate to be specific) quickly on the n95?
    instead of going tools->profiles->activate...a bit cumbersome
    thanks,
    mike

    Yes indeed, you can use voice commands to change between profiles. However, it could take a while to train voice commands to understand you, unless you have a South African accent. Rumour has it that the person who programmes voice commands is South African.

  • Unable to change Profile picture in Windows 8

    I recently upgraded to Windows 8.  The upgrade imported a picture from my Windows 7 Skype, and now I am unable to change the profile picture.  There is no menu at the top in Windows 8, which prevents me from changing the profile picture.
    What are my options for correcting this, and also how does one sign out of Skype in Windows 8?
    Thanks so much.

    Although I'd love to provide a proper response, unfortunately I too have only questions, which I'd hope someone could answer. "Opening Skype and clicking on the picture" isn't as helpful as one would hope. With Windows 8 -- in either mode, through either Google Chrome or IE10 -- there is not only no menu or options with either right or left clicking, but no clear way to change a profile picture through any other means. I've tried everything I could think of -- literally wasting HOURS trying to change this thing. Googling the question gets me only fixes that don't appear to apply. In fact, the lack of coherent help regarding anything having to do with Windows 8 is nothing short of mindboggling -- and I consider myself a pretty good finder-of-information normally!!! I read elsewhere in these forums (unfortunately lost to me now that I have signed in) that it may be a problem relating to whether my browser is 32 or 64 bit (if I read it right). I have since tried to load Chrome in 64 bit.... probably unsuccessfully, given I still can't seem to do much differently. Being a bit of a techno-dud I don't know how to check which version I now have as even with the "about:version" function, the reply isn't definitive to my untrained eye (unless WOW64 means something?). I need things somewhat dummied down. I'm totally new to both Windows 8 and Skype (and for that matter Google Chrome, having always been a Firefox fan, which apparently is not working properly for Windows . ANY help that might be available would be greatly appreciated in making this experience less frustrating. Thank you for whatever you can do!!!

  • I recently changed wireless providers and now have new e-mail address.  changed profiles everywhere including Apple ID.  On my iphone, old email address still appears when I try to access itunes or update apps. How do I get new apple id to sync with phone

    I updated profiles everywhere including Apple ID.  However on my iphone,. when I need to update apps or do antyhing through itunes store, my old email address appears.

    follow directions given in the link to change your Apple ID to the new email address.
    Change your Apple ID - Apple Support
    sign out of your Apple ID on the phone, then sign in with the new Apple ID and password.

  • Primary e-mail is wrong, can't change profile, can...

    I signed up for Skype yesterday using my Microsoft account. The primary e-mail Skype has on file for me is not correct, it is an old e-mail. I have double-checked my Microsoft account and sure enough my current e-mail is the correct and primary e-mail on the MS account.
    In addition to this, I cannot change my Skype profile to update the primary e-mail (my current e-mail is there it's just not listed as primary) because every time I do it Skype asks me for a password. I enter my Microsoft password but it keeps telling me it's not correct. I am absolutely 100% sure I am entering the correct password. I can login to Skype successfully with this password but I cannot edit my profile. The password does not have special characters.
    Earlier today I contacted a Skype representative via live chat, but it was just horrendous. I was on the chat for almost an hour and during this time the chat window made that pencil movement repeatedly as if the rep were typing and about to say something but nothing was said. I think this was done purposely to game the system. Every 5 or 10 minutes I got an answer but it was as if they had no idea what was going on, even though I explained it clearly.
    And in addition to all this your Skype will not let me fill out an e-mail ticket. First of all it requires the name of 5 Skype contacts to open an e-mail ticket. Why it does that I have no idea but it's ABSURD. I put none, none, none, none, none since I just created my account yesterday and don't have any Skype contacts. Second when I actually submitted the form (I tried multiple times) it says this:
    Sorry, we’re having some problems at the moment. Please try again later. In the meantime, you can post to the Skype Community or read our FAQs.
    What a pain in the ass this is, I tell you. Does anyone that works at Skype actually read this board, can you file 4 bugs based on above:
        Skype retrieved outdated information from my Microsoft account. It did not retrieve the correct primary e-mail.
        Skype will not let me change my profile to correct an incorrect primary e-mail without a password, and when I try my Microsoft password which I use to login to Skype it keeps telling me it's incorrect for the profile change.
        Your live chat needs improvement it's like the rep was powerless and didn't understand what I was talking about.
        I can't file an e-mail ticket, either because I don't have 5 Skype contacts (ridiculous rule) or maybe for some other reason it says "we’re having some problems at the moment"
    Thanks

    look here:
    http://community.skype.com/t5/Security-Privacy-Trust-and/So-you-want-to-change-your-primary-mail-but...
    for some reason microsoft won't regard this as a solution, but it is. I spent 1.5 hours on line with skype support, 1hr to try to get them to help me .5 hrs to try to explain to an utterly uninterested support person how to do what they told me I can't do I even got a bashing here from one of the mods, and he didnät even bother to say "sorry" ;-(

  • Change profile name in iMessage

    how do I change the profile name "jabber" on imessage?

    Hi Simon,
    Happy Holidays!  Are you trying to change the name of the Jabber service on your Mac?  Here's how:
    Mac Basics: Messages helps you chat instantly - Apple Support
    http://support.apple.com/en-us/HT202549
    In Messages select Messages > Preferences.
    Click the Accounts button.
    Select the Jabber account on the left.
    In the Account Information tab, change the Description field to whatever name you want.
    Close the Accounts window (red dot in top-left corner).
    Quit Messages and then launch the application again.
    I hope this information helps ....
    - Judy

  • How to change profile photo in mac mail

    Hi,
    How do I change my profile photo in mac mail?

    By changing it in Contacts/Address Book.

  • Change profile name.

    I was recently married and need to change my last name on my icloud profile.  How do I do so?

    Welcome to the Apple Community.
    Start here, change your country if necessary and go to manage your account 

  • Change profile name on support form

    Can anyone tell me how do I change my profile name on this support forum?

    Hello,
    You cannot...once created, it is permanent. To change would require admin access...if really necessary, click the "Report Inappropriate Content" link on the left side of any of your posts and ask for the change you desire.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Change Profile Status

    I have a project e.g OT/83009 which has an incorect WBS Status Profile.
    The profile was initially set as YPS00003 - should have been YPS00004.
    I have changed the profile on the project definition to YPS00004 but the WBS elements are still showing YPS00003 in them and are all grayed out so i cant change them...
    It has set the User status on the WBS elements attached as appv and will
    not let me change it in order to set to QACP.
    Is it possible to set the user status of the WBS elements to YPS00004??
    Thanks
    Ishy

    hi,
    Once a user status is set, you cannot change the status profile of the WBS.
    Muraleedharan.R
    091 9880028904

Maybe you are looking for