Change qualification validity date

Hi SAP-HR experts!
A qualification in our qualification catalog has currently no validity. So we inserted a lot of qualifications for our employee with enddate 12/31/9999. Now we should change this specific qualifcation to a validity of 2 years. The problem is that all corresponding employee qualifications are unlimitid valid (12/31/9999).
Is there a report in SAP available which changes the enddate of all correspondinig employee quailifications to the appropriate enddate (= begindate + 2 years)?
EXAMPLE
Current employee qualification:
begindate 12/01/2006
enddate 12/31/9999
after change:
begindate 12/01/2006
enddate 11/30/2008
Thanks a lot for your support.
Regards
Stefan

Stefan,
I am having a similar issue. Our users wish to change the end date of the assignment of a qualification. However SAP does not allow changing of the begin and end dates once the qualification is assigned to an employee. I am not sure why...
I looked at the program suggested "RHGRENZ4" to change end dates, but does not work either as we have integrated PA and Qualifications, and qualifications are not stored in the regular infotype table (PA0024) but are stored elsewhere.
I would like to know if you have resolved your problem and how.
Thanks
Rajesh Barman

Similar Messages

Change the validity date in change number

hi team,
I want to change the validity date of a change number from 01.01.09 to 01.03.09. I am getting an error "A BOM has already been changed using a change number with the same valid-from date as the selected date 03.01.2009". I can change the date to before 01.01.09 but cannot after 01.01.09.
Can you please help me.
thank you,
Satish

Dear Mamiditi Satish Kumar,
Is it a change number with release key or without release key?
Do you want to assign a different validity date for the changes made using that change number?
Try using alternative date field in CC02.and you have to select the object to assign the alternative date.
Say if you want to assign an alternative date for a processed BOM,you have to select that object and
enter the alternative date.
Regards
Mangalraj.S

Changing the validity date of a work center.

Dear SAP Guru,
We are trying to change the validity date of a certain work center via transaction code CR02, however, we can only see the changed validity date in the validities tab (Costing View) but still the default validity date is the first validity created. We are trying to delete the Cost Center assignment for the unwanted validity date but still it came back to the first validity created. Is this a natural SAP behavior or is there something that we still need to do so that we can default our desired validity date?
Thank you in advance for your help.
Best regards,
JMT

Dear,
Go to KS04.. enter the cost center. Enter the time period for which u want to delete the cost center. enter the date upto which u wanted the end date as the start date of the deletion.... it will delete the cost center for the future time period.... this will do....Then create new one and assign to work center and then check.
There is no validity period for work centers...this will be available as long as you use in the routing.
Hope clear to you.
Regards,
R.Brahmankar

Change the Validity Date.

Dear Supports,
We have tickets more then 1000 in solution manager. The status is over due ie. the current date = 3 days validity is passed. the status is marked as Proposed Solution. and the monitor status is in RED.
Please confirm how can i changed it to green else increasing the date form 3 days to 365 days for temporary.
Current Setting under the ticket is as follows.
Start customer requirement TU 27.01.2009 00:00 INDIA Current Date
End customer requirement FR 30.01.2009 00:00 INDIA Start + 3 Days
Ramesh Jaiswal
9867936636.

Ramesh
You can change the default date and time via configuraiton from spro
Goto spro->scenario specific>service desk>
The create a customized date profile and then assign this to transaction type...if u r usin std then it wil be SLFN.
For more....Goto the Service desk config guide....available on Service.sap
Regards
Prakahr

Changing The Validity Dates In Org Model in CRM- User Level

Hi
How can we restrict the Validity Dates in Organisation Structure at User Level.
I need that the user should be given some specific dates<b> ( Valid till or assigned till )</b> while assigning in the org. And it should be visible always in the Org Model.
We tried using Delimited Date Function, but the User gets ellapsed if the Validity is expired.With the business point of view, <b>the requirement is that all user should be listed in Org model with respect to any dates.this would mean that if a user is terminated we would want to change the Valid till date in the Org</b>

Hi Amrita,
Business partner number and Object ID is automatically determines by system when creating a org unit.
I dont find any configuration to create org unit with your own BP number and object ID. You have option to make repairs to the existing org unit.
Please find the below path to repair the org unit
IMG -> CRM -> Master Data -> Business partner -> Integration Business partner -Org management -> Create Business partner initially
Select the org unit and execute to get all the org units.
You can select the org units with errors /warnings and click on start repair to get automatic assignment of BP.
Hope it helps
Reward points if it helps
Regards,
Madhu

To change "To Valid" date in BOM Header

Hi Guys,
Pls tell me the cofig setting where i can go and change the default "to validity" date-31/12/999 proposed by the system
Awaiting eagerly for quick replies
Vijai

Hi vijay,
please go through the below SDN thread which was replied by our friends earlier.
Re: Valid to date in BOM.
i think it is usefull to you
regards
pradeep

Schedule changes and validity dates for prices in product catalog(SRM-MDM)

Hello!
I'm working on a project that is going to use SRM-MDM and the question is if it is possible to schedule changes(for example to add new prices that have a validity period, can you make the changes now that are going to be valid from 1st of februari?Or can I add products today that are only going to be available to buy from a particular date?).
The other question is if it is possible to have a validity period for prices and when the date is valid,then the product is shown in the catalog.In the same way that when the date is not valid, the product is not shown in the catalog.Can this be made automactically?Can a logic be build to choose which products are going to be shown in the catalog?
Do you have any suggestions for those issues?
Thanks in advance!

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Changing validity date using BAPI_PROFITCENTER_CHANGE for a profit center.

Hi Friends
I need your help to know if we can use BAPI_PROFITCENTER_CHANGE to change the validity period of a profit center.I am using this BAPI in a LSMW program.
The changes I want to make are something like changing the validity dates from
1) 01/01/2006 - 12/12/9999 to 01/01/2007 - 12/12/9999
2) 01/01/2006 - 12/12/9999 to 01/01/2005 - 12/12/9999
3) 01/01/2006 - 12/12/9999 to 01/01/2006 - 12/12/2010
or should I use BAPI_PROFITCENTER_CREATE?
-Thanks
Mitesh

change document in profit center change
Bapi - BAPI_ASSET_ACQUISITION_POST
need a function module for profit center
Please give me reward points...

ALE BOM. Updates ALL! items with validity date & change no.

Hi All,
We are having problems where ALE-BOM sent with change in validity date (with change no) to a particular item. What happens is that ALE-BOM will instead update ALL! items with the same validity date and change number.
Next,when we process ALE again for the same BOM with a different validity date(with change no), then only that
particular item is updated with validity date and change no.
Would anyone know what could be the problem that when changes are sent for the first time all items are updated?
[Version: SAP 4.6C/ SAPKH46C48]
Regards,
Neeth

Dear:
The error itself telling you the correction. You profit center which is assigned to your cost center has a validity date less than the one you are now assigning.You can check in KE52 against the profit center assigned to your cost center master data. However the best thing is to go to KS01 and create this cost center with desired validity date.
This will resolve your issue.
Regards

Change validity dates of BOM version

how can i change a validity date of a BOM? ( valid to )

Hi,
Production Version is the one method. In prod version w can give valid from date & to date.
So system will select the BOM accordingly.
Another option without using Prod version Check in OS32. Define alternative determination of BOM.
In this you can give valid to date for alternative BOM.
Ex: MAT alt 1 valid 10/07/08
MAT alt2 valid 30/12/08
For this selection you have to select BOM selection by - Date in MRP4 view of material master.
So system will select the BOM automatically according to valid date .
Regards,
Dharma

Change Validity Dates for BOM

Dear Experts,
Please guide to change the validity dates for a BOM without using ECM.
What are the steps needed to be followed.
Thanks & Regards,
Rohit.

Dear Sir,
That is what I have done for a material.
Apart from making Routing again after deleting the BOM, do I need to take care of any other thing?
Thanks & Regards,
Rohit.

HR Master Data IDoc HRMDa and validity date

Hi
I have a record in infotype 8:
- from 01.05.2011 to 31.12.9999.
When I use PA30, I copy this record and change the dates from 05.05.2011 to 31.12.9999. Previous record of course changes the validity dates from 01.05.2005 to 04.05.2011, and second record is created with dates from 05.05.2011 to 31.12.9999.
The problem is with incoming IDoc. When I have the same situation as described below, instead of PA30 I use incoming IDoc. Unfortunately previous record does not get changed and I have two records both valid to 31.12.9999. I use "U" in operation in IDoc.
What is wrong?

Hi,
This is due to how ALE works, please check note 134085. So basically
system will first delete the infotype records between E1PITYP-BEGDA and
E1PITYP-ENDDA, and then it will create the records with the information
in segment E1Pxxxx (xxxx corresponds to the infotype number). If you
just send information between dates 05.05.2011 to 31.12.9999, no
record is deleted in target (so original record remains there), and just
the new record in the IDOC (the one from 05.05.2010 to 31.12.9999)
will be updated there. Therefore you will finally get those two
records in target system with same end dates.
If you create the IDOCs using standard tools, then this should be
done correclty.
Regards,
Ana

Standard Cost Validity Date

We are going to keep our existing standards for at least some portion of fiscal 2010. The product costs that are in SAP are due to expire on 12/31/2009. My question is that can I change the validity dates on the existing costs or do I have to redo standard costs for the new year.
Can you please help me on this?
Thanks
Kishore

Hi'
If you don't have any changes in standard cost estimate you have to rerun the standard cost for new period..
As per my knowledge we cannot extend the periods for existing standard cost estimates..
Regards
Srinu

User validity date is not refelcting in Childsystem

Hi Experts,
I have changed the validity of a user in CuA system . But the validity is not reflecting in child system. on checking SCUL I found the error as " User type 75 is not actiive". I didnot find any issues in distributing roles and profiles for this user in CUA.only for user valdity I am reciving this error. Please advice how this error can be rectified. In SCUM the distribution parameter is global for user valdity. I need to know the root cause for this error.
Thanks,
Sanjeev.S

Hi Sanjeev,
Why dont you identify user master data that has not been changed from the central system and distribute it again where necessary.
You can do all this from SCUL
Look at the following SAP notes :
632486
First of all check if that user is existing in the child system and is active or expired:
Some times the user might have been deleted in the backend system and you are tyring to change the validity date of the user only on the CUA system because he exists only in the CUA box.
I strongly think that the user record is manually deleted in the child system
Please try to perform this action for another user who exists and see if its happening the same way.
if it does not.
Go to the child system and delete the user completely and recreate the user one more time in CUA and see what happens.
Edited by: Franklin Jayasim on Jun 29, 2010 7:04 PM

Help reqd on Changing the Valid from "date" for both BOM & Routing

Hi all...
Pls advise me how to do the changing of Valid from "date"....
Is there any process in CC01 or ECM???....
pls reply me in detail step format (step by step analysis)....
I wrongly created in CS01 and CA01 as 05.10.2007 as my valid from date instead of 01.10.2007.....
How to change to my actual one......
I dont know how to change it exactly.....as im beginner in SAP...pls take this into consideration...and post ur replies imm.
Pls reply me in detail....will be rewarded at the end while closing this issue.
thanks & regards
sankar

Dear Sankarbabu,
IF there's no setting for Date Check in OS54 - Engineering Change Management
Control Data,then you can create a change number with past dates,and also to
use the same one for changing BOM.
Tell me one thing you are saying you want to use ECM.Was the earlier one
created without BOM was created without an ECN?
See already if you have created your BOM with an ECN,then remove the date
check setting which I have mentioned in OS54.
Now goto T code CC02 ,enter the Change number and give the valid from date as
01.10.2007.
After that check in CS03 whether this date(01.10.2007)is getting reflected or not.
I'm sure this will solve your problem.
Regards
Mangal

Change qualification validity date

Similar Messages

Maybe you are looking for