Change quantity (MENGE) field in G/L posting

Hi gurus. I need to be able to change the quantity (BSEG/MENGE) field in a G/L document that has already been posted. I found the area in config to add the field to be able to change. So I made the change in config. Then I pulled up a document that already existed, but the field is still grayed out. I also created a new entry, then went back in to change mode, and the field is grayed out. Any ideas?
Thank you
Janet

Not sure about my answer, but I know that you are not allowed to modify any value related fields after a FI document is posted (example, value). So, my guess is by changing the quantity amount will be effected and hence FB02 will not allow you to modify quantity.

Similar Messages

Changing the description field in AP Invoice

Hi is it possible to change the description field in an 'open' posted AP or AR invoice? I assume you have to credit note the invoice and re enter it with the new line item description which seems a long way around when only the text is being changed and not the coding or amounts.
thanks judi

Hi,
All marketing documents, whether closed/open, do allow the user to change the remarks/narrantion. This field is located in the Footer Fields - left corner of the form.
Pls check out.
Assign points if useful.
Thanks,
Srikanth

BOM quantity change (STPO-MENGE) resulting quantity less than 1

Hi,
Anyone have done a BOM quantity change (STPO-MENGE) where the resulting quantity is less than 1. Please help.
Thanks,
     Hazel

Do you mean base quantity by saying header quantity? I'm running variant configuration. The base quantity is restricted to 1. Moreover, changing the unit of measure is not an option. Each is the official base unit of measure.
Sample Scenario/Requirement:
An order for a qty of 1000 requires a total 84 plates. Each plate can yield a qty of 12.
SAP uses the equation -->
Current Component Qty =
            (required qty/base qty) * saved component qty
Calculations:
Step 1) Derive Current Component Qty
Let required qty = order qty (VBAP-KWMENG),
          base qty = max yield per plate (given)
Current Component Qty =
             ceiling (VBAP-KWMENG/max yield per plate)
          = ceiling (1000/12)
          = ceiling (83.333333)
          = 84
The Current Component Qty (84) is the qty used production orders and is equal to the Requirements Qty of the component (RESBD-MENGE)
Step 2) Derive save component qty. In Variant Configuration, save component qty is equal to STPO-MENGE. Base quantity of 1 is assigned to the KMAT (configurable material).
Since Current Component Qty =
      (required qty/base qty) * saved component qty
by substitution -->
    84 = (1000/1) * saved component qty
saved component qty = (84/1000)
saved component qty = .084
Issue/Problem:
I have the above calculations correct in Variant Configuration. To run a check, I do a production order simulation (CO01S) for a Total order qty of 1000 with today's Finish date. When I click for components overview, it gives me a Requirements qty of the component of 83 and NOT 84.
I'm not sure how SAP does the calculation in the background, but I was thinking; maybe, by increasing the number of decimals from 3 (.083) to 6 (.083333) would give me the 84 that I needed.
Roberto

Posting change quantity less than quantity already posted

Hello,
Our customer have a problem on Live system. On transaction LU04 have a
posting change notice impossible to display, because system provide the
message number L2 145 'Posting change quantity less than quantity
already posted'. The Posting Change Number XXXXXX and the
transfer order is XXXX Is there any way to cancel this TO??It is impossible to do something with that.
The history is: 321 movement from quality for 5040 un. 3 TO, 2 with 2160 are fine, and the 3rd to sap have generated 2160 un instead of 720 pending.
Any one had this problem in the past?We are forbidden to change status for PCN from 'T' to 'U'.
Thanks

Hi,
I think you have posted the question in the wrong forum. This is MDM forum.
Thanks and Regards
Nitin Jain

BADI me_process_po_cust, no obtain decimals of menge field

Hi all !,
I can´t obtein decimals in menge field when i use get_data method in badi me_process_item.
it´s my code in process_item method.
        ref              TYPE REF TO if_purchase_order_mm ,
        re_items         TYPE purchase_order_items ,
        line_item        TYPE purchase_order_item ,
        po_item          TYPE mepoitem .
    ref = im_item->get_header( ).
    re_items = ref->get_items( ).
LOOP AT re_items INTO line_item.
        po_item = line_item-item->get_data( ).
       po_item-menge without decimals.
ENDLOOP.
Can you help me?.
Thanks all,
regards!!

I resolved it. In PO, I got a Warning Message "Order quantity violates rounding rules (See long text)".
This post was very helpful : Quantity Copied in Purchase Order is not same as Purchase Requisition
regards.

Updation of the MENGE field in the BSEG table

SAP 4.6C
The material is moved from one plant to another. The excise on the same is also moved from one plant to another via STO. The value in the GL accounts is calculated using the quantity in the STO. However when the FI posting is triggered, the quantity does not flow to the BSEG table (MENGE field), but the value is populated. The posting is triggered via conditions and via OBYC setting
How can we populate the quantity in the FI document.

Hello,
There is a note to help you on to achieve this requirement. CAn you please check the note 608340??
This note has a detailed description about what should be done to update the field MENGE.
Regards,
Renan

Quantity not updated in EDI Vendor posting

Hi experts,
We've observed that Quantity (MENGE) is not getting updated on the FI document (Segment 'E1EDP01'). Idoc type 'INVOIC01' and message we using is 'INVOIC01'.
Any idea or has anyone come across this issue?
Thanks for your time.

Hi,
Segment E1EDP01, quantity and unit of measure the quantity and the unit of measure are transferred if the corresponding fields in the billing document are filled. If the corresponding fields in the billing document are filled, but MENGE is still not updated into FI document, Maybe you have used the user exit EXIT_SAPLVEDF_002 on SD side to suppress the values.
Best Regards,
Gladys

How to trigger replication from CRM to ECC when changing custom z-field?

Hi all,
I've created a z-field in CRM which matches the field KNVV-KLABC in ECC. I've created the needed user exits to replicate from ECC to CRM and vice versa. The functions are called and update successfully. So actually everything works fine except for one thing...
When I change the z-field in CRM - and only that one field - the replication is not triggered hence KNVV-KLABC is not updated. When I however change my z-field together with another pricing field (e.g. Customer Group) then the replication runs and both fields are updated in ECC.
How can I trigger the replication if only my z-field is changed?
Best regards,
Melanie

Hi there,
Thanks for your replies.
I've solved this myself a couple of days ago. However I did it in a different way as suggested here. I will post my solution as soon as I find the time to do the documentation.
Maybe as a hint if someone runs into this; adding a field to the pricing structure of the BP sales areas (SET0030 if you need to know) seems strangely enough "not possible" - I mean it's "not ready yet".
AET f.i. doesn't allow you to add a field there and with EEWB you cannot choose to replicate it to R3. Thus for my solution I had to change SAP Standard unfortunatelly. Also the my customer wants to be able to search for this new field on the Account Search Page - so many steps were needed to achieve all this. As I mentioned I shall present my solution as soon as I get the time for it. If I should forget and you need to know how I did it you may reply to this thread as I'm watching it so I'll be reminded.
Best regards,
Melanie

Could not changed cost center field in document type RE - FSG

Dear Experts,
I would like to change 'cost center field' in act document type RE (invoice receipt) through transaction FB02
I have changed the field of 'cost center' in field status group in OBC4 and OB41 (posting key 50 and 86)
The field staus group both in OB41 and OBC4 are already set as 'optional entry' but field of cost center is still could not be changed/edit (grey area).
Kindly advice
Thank you.

Hi Chandra,
Can you please details the coding part if you can remember ..so that would be helping me lot...Since it's production issue , we have implement immd.
Regards,
Lalit
Edited by: Lalit Sharma on Dec 24, 2009 6:45 AM
=======================
This problem can be closed. I got the note.
Edited by: Lalit Sharma on Jan 12, 2010 12:50 AM

How to Change the Value Field Type of a Value Field

Hi,
How can I change the value field type from Currency to Quantity of a value field? I have tried to do it in KEA6. I can change the value field and its description, but not the value field type from currency to qty. If I change this config, is there any other changes that I need to make so there is no side issue of this change?

Hi Prem,
Once you created value field as quantity or currency, you can not change this nature of value field. Based on this, system creates lots of data and tables. For this reason system will not allow any changes in quantity or currency.
Alternative way is to remove the old value field and create a new value field assign to operating concern and put all your seetings.
Please let me know if you require any clarifications.
Thank you,
Regards,
Santosh
Reward points if helpful.

Changing an input field's appearance to Optional in an ESS WD Java scenario

This thread is posted to help customers with a common user based issue with ESS
SAP may deliver some fields in ESS iviews as mandatory however you may not want some fields to be mandatory and may want the iview display to guide the user appropriately
Often delivered mandatory fields have an Asterisk denoting this field as a mandatory
requirement for data entry in the ESS scenario
The purpose of this post is to show how the Asterisk can be removed and therefore indicate to the user that an entry is not required
There may be 2 ways to do this
1) As of a SP9 in ERP 6.0 press Ctrl and Right mouse button on the field in the PCD preview of the   iview you wish to modify. In the Personalization options there is a "Mark as Mandatory" option please select "Not Personalized" and save then review the iview to see if the asterisk is removed
2) If this does not have the desired effect or you have a lower SAP version or SP level you will need    NWDI to make the change. You will require knowledge of NWDI to make the change -->
Open the required scenario in NWDS
Position cursor on Required field and right click and select u2018Propertiesu2019
Go to the u2018Propertiesu2019 tab
Change property field u2018Stateu2019 from u2018Requiredu2019 to u2018Normalu2019
Save the changes
As this field now appears as optional to the user you also have to ensure the
ECC business logic does not reject a user who does not populate the field with data - therefore you will need mark the field as optional in
V_T588M
V_T588MFPROPS
These changes also affect entry of data into this field in PA30 - HR Administrators or users with R3 access will therefore have the same user experience (i.e field is not mandatory)
If you have issues maintaining V_T588MFPROPS appropriately you can insert an overide into V_T588MFPROPC
If you find the ESS scenario still requests an entry in the field it could be that this field is an essential
or core part of this particular ESS scenario and therefore the model expects data to be populated in this field or it could also be that previous or subsequent fields are dependant on an entry in that field - In this case you may need to make a coding change to the model and/or change the business logic of dependant fields as well.
Edited by: Stuart Campbell on May 8, 2009 1:07 PM

Thank you stuart.

Wiki Server: how to change who "From" field in Mail

I have Mail set up to receive an RSS feed from our Wiki Server and in the "From" field it comes up as "Workgroup: Search Results."
Is there any way to change this, say to "Workgroup Intranet"?

>
Sukhi Singh wrote:
> Hi
> I want to change a Parameter field in Crystal report from YYYY-MM-DD format to DD/MM/YY format
What do you mean by Crystal Report? Are you sure you posted this to the correct forum?

Display MENGE field with no decimals in smartfroms

Hi Experts,
I want to print MSEG-MENGE field with no decimals in smartforms , how do i declare this field,
I have also declared this field in global defination in quantity/currency field...
But i am unable to get the output..
I tried using &mseg-menge(13.0)& but i get an error in my program stating formating is wrong.
Thanks In Advance.
Ashwin.

write a code to display menge value.
data: l_menge type i,
l_menge2 type string.
move: w_bseg-menge to l_menge.
move: l_menge to l_menge2.
condense l_menge2.

How to change date parameter field in crystal from YYYY-MM-DD to DD/MM/YY

Hi
I want to change a Parameter field in Crystal report from YYYY-MM-DD format to DD/MM/YY format

>
Sukhi Singh wrote:
> Hi
> I want to change a Parameter field in Crystal report from YYYY-MM-DD format to DD/MM/YY format
What do you mean by Crystal Report? Are you sure you posted this to the correct forum?

Issue while updating(Changing) quantity on line at quick sales order form

Hi,
I am facing a issue while changing quantity ordered on the order line in quick sales order form. (R12.1.3)
Although the same logic works exactly as required in 11.5.9.
There is a custom logic, post booking line status is Awaiting Shipping.
Now when quantity is changed +(Saved), the status changes to a custom state but at the same time a new row is created with the same line id but different reservation id in the MTL_RESERVATIONS.
The quantity here is the difference between the original quantity and the new entered quantity.
And post completion of the custom logic the original row is updated, but being there a additional row the quantity reserved at the shipping tab comes wrong.
Our requirement is of update which is happening but not the additional insert which is going into MTL_RESERVATIONS.
The logic is perfect in 11.5.9 and no additional insert is being made.
Kindly help and give some ideas for the possible reason the issue.
Please ask for more information if required.
Thanks,
Vishal

Hi Mahendra,
I have gone through the note id that you have given. sorry to say that, that is refering to diffrent issue.
Actually what i did is, At form header level, I have hide the fileds using the folder options. once after changes I have closed the form and re-opened it. by that time I can see that Button names got changed in bottom of the "Quick sales order form". Not sure how it become changed. there five buttons over the form, only two button names got changed.
Kindly suggest any other options.

Change quantity (MENGE) field in G/L posting

Similar Messages

Maybe you are looking for