Change Query Area from Standard to Global

Hi,
I am trying to change the queryarea from standard to global. is it possible to do this or vice versa?
Thnaks in advance
Regards
Rakshan

hi Rakshan,
you can do this with program RSAQR3TR.
hope this helps
ec

Similar Messages

Default Query area to 'standard area' in Quary

Hi Guys,
Our company just upgrade from 4.6C to ECC6. In the query environment (SQ01), everytime we want to enter sq01 we must change the query area (Environment --> Query Areas) to 'standard area'. Can anybody guide me how to set as default to 'standard area' . Currently it's default to 'GLobal area'.
Thanks in advance...
-akma-

Hello
Try to insert parameter AQW as 'blank' in your user paramters. Also you can insert a default query group via paramater AQB.
BR
Søren Kirch
LOGSTOR

Changing controlling area from single company code to cross company code

Hi,
Due to my client requirement, in the middle of the year, we need to change the controlling area from being same as company code to cross company code controlling area. Although the currency is same. We are going to create a new company code. Is the changing controlling area settings possible to do? what are the precautions and changes need to be taken?
One more question, we need to change the company code when the new company code is created in the system in Cost Center Masters in the middle of the year. Is this possible after changing controlling area from single company code to cross company code. Right now company code is not appearing in the cost center master.
Thanks & Regards,
Saidarao

Hi,
If both companies having transaction data its not possible,Normally before defining Organisational Strucutre only we have to deside both companies is assigning same controlling are or have to maitain separately for this we have to compare the Fiscal year,Operating chart of accounts ,if both having same then we will assign both the company codes to one controlling area if these two companies having different currencies also its not a problem.When we creating Controlling Area we have to choose option of controlling area as same company code (if one company code one controlling Area) for example if you assigning two companies then we have to use cross company code cost accounting.If u need any further information let me know.
Regards,
Satya

De-Activating the 'Change Query' option from the Bex Menu

Hi,
I want to deactivate the button 'Change Query' in BEx Excel. I have the restricted the user for not to change the query through PFCG. When the user selects this option, a error message 'You do not auth. for change' is displaying but he can view the query and also the formulas which are written in the query.
I want to avoid the user to see the formula and details in the query.
Can anyone help in deactivating this option from the menu.
Thanks
Ramesh Ganji

hi,
check if helps
Bex Analyzer Toolbar in Excel
Disable or remove "Business Explorer" in the menu bar

HT1364 Changing media folder from standard

My iTunes 11 cannot see the new media folder I've created on an external drive. This is despite changing settings as recommended. Any pointers would be much appreciated.

I've got a really helpful answer and explanation from the moderator of the iLounge "iTunes related Mac PC Applications: http://forums.ilounge.com/itunes-related-mac-pc-applications/280162-itunes-canno t-see-media-folder-external-drive.html
Nick

My iPad2 calendar will not allow making a new appointment. And all responses which show up on this query are from 2011

The 'plus sign' to add a new appointment/event is 'grayed out'. Previous questions on the subject date to 2011! Why? And how do I add appointments to my iPad2?
have never had this problem before, although I don't use the calendar much.

Try resetting the iPad. You won't lose any data if you do this. It's just like rebooting your computer. Hold down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple logo appears on the screen after which time you can release the buttons and let the iPad start up.

Query Areas on SQ01

Hi experts,
I am performing an upgrade from r3 4.6 to 6.0.
On the new version; everytime we enter on the transacction SQ01 we have to change the parameter Enviroment/ Query Areas from value Global area to standard Area.
Is there any way to set this as default for everytime we enter? I thing that we can do this with a user parameter on the transaction su10; but i have no idea of what the parameter could be.
Does anybody can give me some help about this please?
Tank-you very much.

Hello Artur,
This link should help you on this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40bec8da-4cd8-2910-27a9-81f5ce10676c
Thanks & Regards
Vivek

How to find a query name from report name

I have a report in my system with the name AQICMM==========P2============ . I believe this was created from a query. How to find the query corresponding to this report ? I need to change the logic for certain columns of the report. How to know if this was created from SQVI or SQ01 or any other transaction.
THanks.

Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM

How to document a query/report from HR-Infoset

Hi,
we developed some queries from our own HR-Infoset. As our users are not
allowed to work directly on this infoset or its queries every query has its
generated report. The users call these reports through a transcation code.
Unfortunately we have not found a solution to make some documentation for
each query. As the reports are generated, documentation is not allowed there.
If i press F1(Help) on a report of personnel administration (e.g. S_PH9_46000216 jubilee list)
a browser is opened with an appropriate description of the pa-reports.
Do you know any possibility to document a self developed query/its generated report?
Thanks in advance.
Harald

Found it..Query name is P2. It was in a different query area..Standard area and not custom area where I was initially looking at.
Edited by: Shareen Hegde on Aug 22, 2008 5:14 PM

Changing business area on a cost center

We mainly use HR, but we use some FI/CO for accounting. (I am no expert in FI/CO whatsoever - so please excuse any incorrect terms).
Our users have entered incorrect business area to a cost center.
This business area is now registered on employees, and payroll/posting has been run up unitil October 2010.
If I try to change business area from 01.11.2009 (realize it is probably not good to change earlier due to postings); I get the following error message: "Field change Business Area is not possible (transaction data already exists)"
In addition, the message says: If you still want to change the object, select a suitable change interval by choosing "Edit -> Analysis period...". However, trying to change the analysis period I am told I have to choose year end.
My questions are:
1. Is there a way I can change business area from 01.11.2009 ?
2. Is there a way to change area earlier - and if so, what are the impacts+
I appreciate any help
Kirsten
Edited by: Kibo on Oct 11, 2009 2:44 PM

Hi Kirsten,
Normally, it's not possible to change business area during a fiscal year once there is already postings in this Fiscal Year.
The reason is to make sure that there is no change within the fiscal year since you then would have different postings - cost center belonging to different business areas within the same fiscal year. Meaning that it is possible to change the business area for the next fiscal year like described in the long text of the error message KS134. The reason is that it is to avoid inconsistency update of the table (COSS, COEP, or COSP).
Although, If the following requirements are met, than it is is possible to change the business area during a fiscal year with the
help of the note 62716:
1. The change interval is set to period limits
2. There is no dependent actual transaction data in the change interval
    or afterwards.
3. There must already be an analysis period for the respective cost
    center which starts on the first day of the chosen period. If this
    is not the case, you can create one with 'Change cost center'
If the requirements are met, you can run the report RKACOR06 in SE38
safely. I recommend you to execute the report first with Test Run on
your test system.
Regards,
Greta

How to Modify the Ad-hoc Query Infoset of Standard Area.

Hi all,
Am having problem with Ad-hoc Query.
i need to modify ZHR_PA_01 Infoset, this is an infoset available in Satandard Area.
For displaying the Infoset, am Unsing T-code : S_PH0_48000510
As of my knowledge Using T-Code SQ01& SQ02.... we can create , Change, delete the Infosets of Global Area.
But
please any body can tel me,How to Change the Infoset of Standard Area
How to add the New Field Group to this Standard area infoset.
Thanks in Advance.
Points will be rewarded.
Regards,
Kalam A.

Hi Prakash,
thank u very much,
yes, i have added the new Infotype 9105 to data fields.
1.but this infotype in Data fields is showing as P8003.
could you tel me why this is showing like this.?
2.i have a field "Priority" in the existing "Critical Role" Field Group.
n My requirement is
"Add the Priority Field text description as an additional output field. the Numeric value stored in the Proirity field can be lookied up in the YHRPRIOX table,Object Type ZR."
3.After adding fields to newly created Field Group, is there any think to do the Coding or Changes.
4.After adding i have saved it & Generated the Infoset, i got few warnings.
and Could you tel me How to test this..??
Could you provide me, if any links or materials for this..?
Please dont feel bad for all asking all the questions
Cos am very new to Ad-hoc Querry and i have gone through the Documents in Help.sap.com.Am unable to find the above questions.
So
Could you please answer to my questions.
Thanks&Regards,
Kalam A.

Changing from Standard cost to FIFO

Hi Experts,
One of my client want to change from standard cost to FIFO.
Can you please specify what precautions should I take before proceeding this change ?(system wise/accounting )
(I am aware of back up procedures,please donot specify that procedures)
What are the things I should be aware of ?(system wise )
Thank you
bishal

Hi,
Issue all the stock. After that you can change the valuation method.
This is a good time to see if everything is alright with the system.
When all the stock has been issued the following should be true:
- Inventory Audit Report for all items and all warehouses should be 0 (zero)
- The balance of all the stock accounts should at this time be 0 (zero)
If this is not the case. Contact support.
I take it for granted that you will do this in a testenvironment before doing it on the productive database.
Hope it helps.
Jesper

Change price control indicator from standard price to moving avg price.

Hi All,
There is a material which has a negative stock for the previous period and the previous period is already closed.
When i want to change the price control indicator from S to V for that material in the current period, it shows an error that "negative stock is there, unable to change price indicator".
Kindly help me to solve this issue.
Thanks,
AK

the price control indicator can be changed from standard price to moving avg price at any time .......with some restrictions.
And one of these restriction is the one you see.
You must not have negative stock.
Hence you have to make the negative stock zero
Since your negative stock is in the previous period, you either have to allow posting into previous periods (trx MMRV , of course Finance has to allow this as well) first. Then you can post e.g. a 202 movement with previous period date which has a quantity that equals your negative quantity. then you change your price control, then you do a 201 movement (again with previous period date), finally you can restrict posting into previous periods again in MMRV.
or you just wait a few days, then with the month end closure your curent period becomes previous period and hopefully you will not have negative stocks again. then you can change the price control without any problem (I usually take care that moving average and standard price are equal befor I change the price control)

Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

I just changed my account from the UK to the USA. Now, most of my songs are not available. How do i get them authorized?

Downloading past purchases from the App Store, iBookstore, and iTunes Store
iOS- How to transfer or sync content to your computer
iTunes Store- Transferring purchases from your iOS device or iPod to a computer
If you have non-purchased content then you need to use third-party software to transfer it to your iTunes Library - Phone to Mac - Pod to Mac.

Change Query Area from Standard to Global

Similar Messages

Maybe you are looking for