Change reader

I bought my e-books in Adobe Digital Editions format. Must agree, I was expecting something from Adobe to be better. This is NOT a nice reader.
I want to see if it will not be better with MS Reader - as I am using tablet pc with Windows.
How do I download my e-books in this format - or I do not hope so - must I re-buy all of my e-books?
Please advise
Deon

NOBODY here can uninstall or reinstall software on YOUR computer. That's YOUR reeponsibility. You can download Reader 9, 10 or 11 here: http://get.adobe.com/reader/enterprise/

Similar Messages

How to change read only folders into normal ones...i can't get any filed from my harddrive

how to change read only folders into normal ones...i can't get any filed from my hard drive..it shows read only

Which HDD are you referring to, an external one, or the internal SSD?
If external, which format is it in?

How do i change read/write permission on an external hard drive?

how do i change read/write permissions for an external hard drive?

If, on the otherhand, you are trying to write to a drive that is formatted NTFS (for Windows), and can't.
You have two choices...
1. Reformat the drive. Either Mac OS format, if you are using this only on your Mac. Or ExFAT, or FAT 32 if you intend to use it on both a Mac OS computer and a Windows unit. note: ExFAT is not suported by XP.
2. Install one of the drivers necessary for the Mac to write to a NTFS volume. Unless you want the experience of having the support for this being one that is sporadic, avoid this. I used to be a strong proponent of NTFS-3G, until I started having the problems with Lion, that many users warned us about. Go this route only if you find you must use NTFS on your drive. Paragon and Tuxtera are the sources for these.

Change reading option in Acrobat pro 7 not accessable.

I'm trying to change the reading options in my acrobat document in Acrobat pr 7 for mac, but the "Change reading option" under Advance is not "clilckable".
What can I do?

You could try printing to a new PDF with the PDF printer, setting the page size to 8.5 x 11 and setting the page scaling option to 'Fit to Printable Area'. This will hopefully leave the existing 8.5 x 11 ones about the same size (it may shrink them slightly) and scale the other sizes.

HT2237 what is Error code -8076 get it when changing read/write permissions on an iTunes music folder. I did google it but could not find

get it when changing read/write permissions on an iTunes music folder. I did google it but could not find anything???

get it when changing read/write permissions on an iTunes music folder. I did google it but could not find anything???

Change reader app and choose reader app from iTunes before sync

Anyone knows how to change reader app for a pdf file?
It seems if I've chosen one app to open a pdf then my file's stuck there for good
Also is there any way to choose which app to open a book in my iTunes to be sync'ed to my iPad?
What happens right now is if I add a file to my iTunes andsync to my iPad then it goes immediately to iBooks, while it can only be readwith other DMR-supported app
Thanks a ton in advance!

It's not possible to delete it. It CAN be disabled via restrictions, as can installing apps.
Go to Settings>General>Restrictions.

WDA error in changing read only property of fields at runtime

Hello Friends,
I am creating a custom Web Dynpro ABAP Application for FI module in ECC 6.0
I need to make a set of fields uneditable/grayed out based on a value in a dropdown list. If the user chooses the other value (out of the 2 values provided) in the dropdown list, the set of fields need to made editable.
I created a context attribute of type WDY_BOOLEAN and bound this attribute to the "readOnly" property of the aforementioned fields. When defining context binding, I chose the option "Bind Directly to the Selected Attribute".
I have written the following code in the OnSelect event handler method for the dropdown:
I read the value in the dropdown which is stored in the variable "lv_payment_instrument". Based on this value, I am changing the value of the context attribute:
if lv_payment_instrument = 'X'.
DATA lo_nd_check_fields1 TYPE REF TO if_wd_context_node.
DATA lo_el_check_fields1 TYPE REF TO if_wd_context_element.
DATA ls_check_fields1 TYPE wd_this->Element_check_fields.
DATA lv_editable1 TYPE wd_this->Element_check_fields-editable.
navigate from <CONTEXT> to <CHECK_FIELDS> via lead selection
lo_nd_check_fields1 = wd_context->get_child_node( name = wd_this->wdctx_check_fields ).
@TODO handle non existant child
IF lo_nd_check_fields IS INITIAL.
ENDIF.
get element via lead selection
lo_el_check_fields1 = lo_nd_check_fields1->get_element( ).
@TODO handle not set lead selection
IF lo_el_check_fields1 IS INITIAL.
ENDIF.
@TODO fill attribute
lv_editable = 1.
set single attribute
lo_el_check_fields1->set_attribute(
    name = `EDITABLE`
    value = 'ABAP_FALSE' ).
elseif lv_payment_instrument = 'Q'.
DATA lo_nd_check_fields TYPE REF TO if_wd_context_node.
    DATA lo_el_check_fields TYPE REF TO if_wd_context_element.
    DATA ls_check_fields TYPE wd_this->Element_check_fields.
    DATA lv_editable TYPE wd_this->Element_check_fields-editable.
*navigate from <CONTEXT> to <CHECK_FIELDS> via lead selection
    lo_nd_check_fields = wd_context->get_child_node( name = wd_this->wdctx_check_fields ).
*@TODO handle non existant child
   IF lo_nd_check_fields IS INITIAL.
   ENDIF.
*get element via lead selection
    lo_el_check_fields = lo_nd_check_fields->get_element( ).
*@TODO handle not set lead selection
    IF lo_el_check_fields IS INITIAL.
    ENDIF.
*@TODO fill attribute
   lv_editable = 1.
*set single attribute
    lo_el_check_fields->set_attribute(
      name = `EDITABLE`
      value = 'ABAP_TRUE' ).
endif.
When the user chooses either of the 2 values in the dropdown, the set of fields are made uneditable. I am unable to make them editable again.
I would greatly appreciate your inputs/thoughts on how to rectify this error.
Regards,
Arun.

Hi,
Create one attribute of type WDY_BOOLEAN , i think u already done.
First get selected dropdown value into one variable.
For example :
lo_el_segment1 = WDEVENT->GET_CONTEXT_ELEMENT( 'CONTEXT_ELEMENT' ).
get all declared attributes
lo_el_segment1->get_static_attributes(
IMPORTING
static_attributes = ls_segment1 ).
now ls_segment1 has selected drop down value.
DATA : lv_dropdown type string .
lv_dropdown = ls_segment1-segment.
If lv_dropdown = 'X'.
set single attribute
lo_el_check_fields1->set_attribute(
name = `EDITABLE`
value = ABAP_FALSE ). // No Quotes, ABAP_TRUE or false not works use 1 0r 2 or ' ' 'X' .
elseif lv_dropdown = 'Q'.
set single attribute
lo_el_check_fields1->set_attribute(
name = `EDITABLE`
value = ABAP_FALSE ).
else.
set single attribute
lo_el_check_fields1->set_attribute(
name = `EDITABLE`
value = ABAP_TRUE ).
Hope it solves..
cheers,
Kris.

How can I change read/write permissions for a DVD RW?

I've some files saved onto a DVD RW previously and would like to add on more files to it. However, it doesn't allow me to do that. When I checked the file info, it says that I have read & write privilege, but at the same time, there's another line that says "You can only read". When I clicked on the lock to attempt to make changes to settings, nothing is clickable. Take a look at the screenshot below and you'll know what I mean.
Can anyone advise on why this is happening?

A DVD-RW has to be wiped before re-use, so you will lose all data previously copied to it.

All folders changed Read Only

Okay, so recently, just about all my folders (including every subfolder in iTunes and the such) have become read only. So whenever i try to change something, i need to set that folder back to read and write for Me. This is very annoying, and I don't know what happened to make all the folders read only.
Is there some way to change all the permissions on my disk back to Read and Write for Me (the administrator) without going through every single folder?

first, whatever you do, don't try to make everything on your hard drive read+write for yourself. this will invariably brick the system and you'll have to reinstall. there is no other outcome possible.
where exactly are the problem files located? only in your itunes folder? somewhere else in your home directory? what exactly does the permissions panel for such files say?

Dynamical change read only property of columns based on a profile option

Hi,
We are attempting to change a Oracle iProcurement(ShoppingCartPG) which has certain readonly columns by default.
However, we need to make these columns updateable based on a responsibility level profile option. The code goes something like this.
if readonly_profile_option = "TRUE"
{make columnA property = readonly}
else if readonly_profile_option = "FALSE"
{make columnA property = updateable}
I read the guide about switchers and it seems confusing (to me). So if someone can provide an example with some pseudocode that will be helpful.
Also, can I dynamically add an LOV to column A if readonly is false? Of course the LOV should be disabled if readonly.
Thanks a lot

Hi,
Thanks for the feedback.
Tapash,
Switchers definitely don't make sense.
Raffy,
Didn't know it was that simple. I always thought that the controller fires--> then the page renders --> then the VO attributes get poulated. Basing my understanding on this flow, I though that the bean properties can only be set in controllers and not in VOs(via SPEL). I'll try it tomorrow.
Aprreciate your comments on the following.
Our requirement is to make an Oracle seeded field(SupplierName in iProcurement) updateable and with an LOV . Oracle has seeded it as ReadOnly.
I have two options.
1. If I change the readonly property in jedeveloper(I cannot access it via personalization) and add SPEL that would be upgrade 'unsafe' customizing - I think.
2. So I thought I'll extend the controller, substitute it and use
messageLOVInputText SupplierNameBean=webbean.findChildRecursive("SupplierName");
if{profle=not_read_only)
{SupplierNameBean.setReadOnly(false)};
else
{SupplierNameBean.setReadOnly(true)};
This is more upgrade safe. I have talked to the iProc development team and they are fine with it.

Acrobat Pro 9 & 10 crash when changing read order

I have a calendar I have been making in Indesign for years with no changes other than the entries. After I export to PDF, I use the read order tools to arrange the read order for a blind client and calendars cant be read normally without giving it the order. As of several months ago, when I go to rearrange the readorder, it will crash. It doesnt do it to every change to the order I make, just certain ones, and those certain ones change on me each month. Im clueless why this is and because of it, I havent been able to properly make a PDF for this blind client without the calendar reading completely out of order. What could be causing this????

Your issue may not be related to a difference between v8 and 9.
I have not had this problem on my computers, but a coworker had this issue. For many documents that others were able to open and scroll through without issue, his computer was freezing and unfreezing. IT determined his graphics capabilities were not able to keep up with the requirements of working with larger documents and gave his computer a RAM upgrade and a new graphics card. Particularly during scrolling, higher demands are made on the computer to graphically render and re-render page content. Documents giving him problems before became a non-issue.
A new graphics card is obviously a $$$ solution, but you might want to check to see if your RAM meets the minimum requirements and check to see if there are any program updates (Help > Check for Updates).
I have had an issue of pdfs freezing, but not specifically in the table of contents areas. If your document has pages with images that have an unusually high number of layers, it may affect the ability to work effectively in the document.

How to change "read table ......" sentense to OO method ?

READ TABLE lt_origin_table into lt_target_table
             WITH KEY user_id= lt_target_table-user_id.
This sentense is allowed in function module but can not be written in an OO method , so what can i do ?
Now I use 2 loops ,
Loop at lt_origin_table ....
   loop at lt_target_table
   endloop.
endloop.
The result is OK , but the performance is not good enough , can any one help me ?
Regards .

<b>Example :</b>   Selection of a particular line in the internal table sflight_tab and assigning it to a field symbol <sflight>. After the line has been successfully assigned, the content of a component of the line is changed in the internal table.
PARAMETERS: p_carrid TYPE sflight-carrid,
            p_connid TYPE sflight-connid,
            p_fldate TYPE sflight-fldate.
DATA sflight_tab TYPE SORTED TABLE OF sflight
                 WITH UNIQUE KEY carrid connid fldate.
FIELD-SYMBOLS <sflight> TYPE sflight.
SELECT *
       FROM sflight
       INTO TABLE sflight_tab
       WHERE carrid = p_carrid AND
             connid = p_connid.
IF sy-subrc = 0.
READ TABLE sflight_tab
       WITH TABLE KEY carrid = p_carrid
                      connid = p_connid
                      fldate = p_fldate
       ASSIGNING <sflight>.
IF sy-subrc = 0 AND
     <sflight> IS ASSIGNED.
     <sflight>-price = <sflight>-price * '0.9'.
ENDIF.
ENDIF.
reward points if it is usefull ....
Girish

How to change read-directory when using file adapter

Hi, I'm deploying BPEL process to read files from a directory. I want to change the directory where to read dynamically. This can be achieved by using a file header variable. I know how to do this. But, the problem for me is that I can not find a place to assign this file header variable a correct value. The first step in my BPEL process is the receive-step and this has to be the first step. I wanted to place the assign-step before this step but this makes the BPEL process invalid. First step has to be a receive or a pick-step. So, now I have a dilemma! Anyone an advice on this?
Thanks in advance.

Maybe you can use this information :
http://otndnld.oracle.co.jp/document/products/as10g/1012/doc_v3/integrate.1012/B14448-01/html/app_trblshoot.htm
A.3.3 Common User Errors explains something about the fileheader messages

Can Adobe change Reader (XI) on my computer to version compatible with my operating system?

I have the incorrect version of Adobe Reader on my computer. I have the Adobe PDF Pack/PDF to Office file converter, version XI. I was told by an Adobe telephone consultant earlier that this version was not compatible with my Windows 7 operating system and that was why my documents were coming out garbled. However, when I reviewed my billing a couple of months ago with Adobe, it was found that I had duplication for different Adobe products. Adobe has corrected this, but assured me at the same time that I had paid for a year for my PDF converter. I think at that time, the incorrect version (XI) appeared on my machine again. I need to change the PDF converter back to the old subscription, so that my documents are not garbled when they are converted to Word documents. Please help. Can you notify me by e-mail when this correction is made? Shirley Montgomery [email address removed]

NOBODY here can uninstall or reinstall software on YOUR computer. That's YOUR reeponsibility. You can download Reader 9, 10 or 11 here: http://get.adobe.com/reader/enterprise/

UIX - Changing read-only-table row colors

Hi
I have the requirement to alternate the background-row-color in an UIX read-only-table dependent on a value in the row.
Can anybody point me in the right direction of a solution please?
I'm familiar enough with the styles in the XSS style sheets, and using EL to dynamically change attributes of a UIX web page when rendered. However in the default <table> UIX tag generated by JDeveloper when dragging a data control onto a UIX web page, there doesn't appear to be a <row> tag for changing the background colour?
Any help appreciated
I'm using JDeveloper 9.0.5.2.
Cheers,
CM.

I don't know if this works in JDeveloper 9.0.5.2, but there's a solution at least for JDevloper 10.1.2. You have to define a different styleClass (a CSS) for each column, depending on a condition. This solutions works as well together with row banding:
<column>
<columnHeader>
    <sortableHeader model="${ctrl:createSortableHeaderModel(bindings.MyView,'Seats')}" text="Seats"/>
</columnHeader>
<contents>
    <rowLayout width="100%" styleClass="${ui:cond(uix.current.IsLocked == 'J', 'OraTableCellLocked', '')}">
      <contents>
        <cellFormat>
          <contents>
            <textInput model="${ui:defaulting(uix.current.Seats, ' ')}" columns="10" readOnly="true"/>
          </contents>
        </cellFormat>
      </contents>
    </rowLayout>
</contents>
</column>The styleClass "OraTableCellLocked" has to be defined in the file "base-desktop.xss". An example ("Locked" cells are displayed with a red background):
   <style selector=".OraTableCellLocked">
    <includeStyle name="TableCellDataText"/>
    <includeStyle name="TableCellDataVerticalAlign"/>
    
    <includeStyle name="TableCellDataBorderColor"/>
    <property name="background-color">#FFA4A4</property>
</style>Hope this helps, although the original is very old.
Regards,
Georg

Re-installed photoshop elements 12. In folder correct copies, how to change read-only to edit photos? After printing photo how to return to grid view?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

Reinstalled photoshop elements 12. How to change photo after printing back to grid view? In folder correct copies one or more files is read only. How to change so these can be edited?

Change reader

Similar Messages

Maybe you are looking for