Change recorded piano tuned to 443Hz to 440hz?

I,ve tried to use the pitch shifter/time stretch in the audio window... but it just sounds terrible.
I tried this part of sample editor b4 but the "cents" just don't seem to be correct. It should be lowered around 10 cents, no?
Am I missing something?
(Never had this problem in Cubase or Nuendo, winge winge).
Thanks for any help.
This will be my last question 2 night...I promise.

Thanks
Of course,
so..
4 cents = 1 Hz
Will tinker again tommorrow and follow up post.
Many greetings to my ex-hometown.

Similar Messages

How to change records in ods.

hi
is it possible to change records in ods ?. how ?
tnx in advance
mani

Hi Mani,
afaik, there is no way to change data in the ODS.
What you could try, if you load data into this ODS via PSA, is to from ODS the request that you need to modify, edit the request in PSA and load it into ODS again (from PSA - Update Immediately menu option).
Hope this helps. Cheers.
/RB

How to change records in standard tables ?

how to change records in standard tables ?

HI,
If you are asking from program..Then you can use BDC or BAPI to update the records in teh standard tables..
OR
use the corresponding tcode to update the record
Thanks
Naren

What setting need in SAP R/3 if i want to send only changed records to XI

Hi All
     I had problem while sending Idoc from SAP R/3 to XI
     Thing is i want to send only the changed records in Idoc not all so what
     settings i need to in SAP R/3 ?
     Can any one explain me how to do this...
Adv thanks and Points
Prasad K

Hello Prasad,
Many cases you will find that there are standard message types for change idocs.
For Instance let us take Purchase order:
--For Order create ORDERS is the message type.
--For Order Change ORDCHG is the message type.
You will just need to maintain both in the outbound parameter in the Partner Profile in we20.
From XI side this means there are separate interfaces -- ORDERS.ORDERS02 & ORDCHG.ORDERS02 for instance. You just need to treat this as different interfaces and Configure. One last thing . If the basic type is same eg. ORDERS02 then you can use the same message mapping program for both Change and create if you want -- although the interface mapping will be different.
Make sure to maintain metadata in IDX2 in XI.
Cheers,
Himadri

No IDOC's for the change record in child and CUA systems.

Hi,
The user profile was modified and assigned roles and profiles on so and so date by someone as it is showing in the change record of the user in the child system with a batch user id.
I have search the IDOC's with respective of the child system, date & time but I didnu2019t find any IDOC with respective of the above criteria.
So kindly help me out is there a way I can find the information as who changed the user profile via CUA system....
Thanks for your help...
Thanks & Regards
Sukumar. V

Release:
700   Master & Child
SP level
Can i know for which area you need it...
BASIS
0015   Master
0013   Child
Netweaver
0016   Master
0015   Child..
Please let me know if you need any further info....
SV

New status for changed records or Additive Delta

Hi Guys,
I have a design question for ODS and Extractor.
The requirement is as follows...
There is a table in CRM with service point as primary key. The fields in the table for example are bill account and Meter ID. Key figure is a XYZ value. In CRM for that Bill account Meter ID combination the XYZ value will change every year. In CRM the same record is being updated with changed value of XYZ. But in BW when the delta is being sent I do not want it to update the existing record but add it as a new record. This way the history can be tracked for previous years XYZ value.
What is required to make this happen?
When creating the extractor I think I should give the delta as new status or additive delta?
What should I indicate as delta specified field?
For the ODS ( I am on BI 7.0) should I create the normal ODS or should I create the write Optimized or something for this requirement ( I dont remember right now the 3 types of ODS we can create).
Your inputs will be greatly appreciated.
Thanks
Kumar.

Thanks Puneet!
Good Answer.
New and Changed records does help in getting the records as desired.
But the problem is while loading into BW I cannot create a new record. The primary key is only Service Point. So even if the key figures and dates associated with that record changes, BW will still update my existing record.
Is there a possibility of using the dates as a pointer that a new record should be created.
Let me explain it better. Following is the structure of table.
Service Point (primary key)
Product GUID (key in CRM)
Circuit ID
Installation date
Effective date
Termination date
CRC (some key figure)
Scenario is - This year Service Point A with CRC value as 50 with effective and termination date for example .. May1 2009 - Apr 31 2010.
Service Point   CRC   EffectiveDate   TerminationDate
A                     50      5/1/2009         4/31/2010
Next year the same service point will have different values and CRM system will update the record in CRM table.
Service Point   CRC   EffectiveDate   TerminationDate
A                     60      5/1/2010         4/31/2011
1) So I was wondering if there is a way or some code can be written to check if effective and termination dates are not same it should be added to ODS as a new record.
2) Another way is to make some sort of Time dependency. Like use Valid From and Valid To dates to track the changes to the record and display all the different values for every record when the CRC values were valid between what dates.
3) or some other way you can suggest

Change automatic SQL Tuning Advisor time

Hi All,
can anyone help me in changing "automatic SQL Tuning Advisor" job timingsm because currently it is scheduled during peak hours , i want to change it to evening 6 pm daily.Because during peak hours it is taking more cpu and taking one hour.
Wed May 08 08:00:10 2013
Begin automatic SQL Tuning Advisor run for special tuning task "SYS_AUTO_SQL_TUNING_TASK"
Wed May 08 08:05:47 2013
thanks
Mapps

Hello,
Here's what you can do,
Create a new window to the time you want it to run:
EXEC dbms_scheduler.create_window(window_name => 'YOUR_WINDOW_NAME',
duration => numtodsinterval(1, 'hour'),
resource_plan => 'DEFAULT_MAINTENANCE_PLAN',
repeat_interval => 'FREQ=DAILY;BYHOUR=18;BYMINUTE=0;BYSECOND=0');>
The above window would be in effect from 6 pm to 7 pm.
Then, disable automatic sql_tuning and then re-enable it to run on the window you just created:
EXEC DBMS_AUTO_TASK_ADMIN.DISABLE(client_name => 'sql tuning advisor',
operation => NULL,
window_name => NULL);>
and now set it to run to your window:
EXEC DBMS_AUTO_TASK_ADMIN.ENABLE(client_name => 'sql tuning advisor',
operation => NULL,
window_name => 'YOUR_WINDOW_NAME');

How can we get changed records in delta in case of numeric pointer

Deall All,
Thanks to all of you gurus i have been able to Get delta update for my query.
There is one last issue how can i include changes records in my delta update when i am using numeric pointer for data selection.
or
It can only be doen by time stamp.
can you explain me details of using time stamp.
Thanks & regards,
Gaurav Sood

Dear Gaurav,
Here we have three options for delta updation:
Time Stamp:   If we want to update change in the records with respect to the time interval then this option is selected.
Calend. Day:   If we want to update change in the records with respect to day to day basis then this option is selected.
Numeric Pointer: If we want to update in case of record which is completely new with respect to Field name then we use this option.
And we have got some settings like:
Safety Interval upper limit:
This field is used by Data Sources that determine their delta generically using a repetitively-increasing field in the extract structure.
The field contains the discrepancy between the current maximum when the delta or delta init extraction took place and the data that has actually been read.
Leaving the value blank increases the risk that the system could not extract records arising during extraction.
Example: A time stamp is used to determine the delta. The time stamp that was last read is 12:00:00. The next delta extraction begins at 12:30:00. In this case, the selection interval is 12:00:00 to 12:30:00. At the end of extraction, the pointer is set to 12:30:00.
A record - for example, a document- is created at 12:25 but not saved until 12:35. It is not contained in the extracted data but, because of its time stamp, is not extracted the next time either.
For this reason, the safety margin between read and transferred data must always be larger than the maximum length of time that it takes to create a record for this DataSource (with a time stamp delta), or it must display an interval that is sufficiently large (for determining delta using a serial number).
Safety Interval Lower Limit
This field contains the value taken from the highest value of the previous delta extraction to determine the lowest value of the time stamp for the next delta extraction.
For example: A time stamp is used to determine a delta. The extracted data is master data: The system only transfers after-images that overwrite the status in the BW. Therefore, a record can be extracted into the BW for such data without any problems.
Taking this into account, the current time stamp can always be used as the upper limit when extracting: The lower limit of the next extraction is not seamlessly joined to the upper limit of the last extraction. Instead, its value is the same as this upper limit minus a safety margin. This safety margin needs to be big enough to contain all values in the extraction which already had a time stamp when the last extraction was carried out but which were not read. Not surprisingly, records can be transferred twice. However, for the reasons above, this is unavoidable.
Data Source Is Real-Time Enabled
The 'real time enabled' indicator determines whether a delta-enabled Data Source can be used as a supplier of data for a real-time daemon.
And there are two options provided like
1)     New Status for changed records:
If you select this option each record to be loaded delivers the new status for the key figures          and characteristics. DataSources with this delta type can write to ODS objects or master data tables.
2)     Additive Delta:
The key figures for extracted data are added up in BW. Data Sources with this delta type can supply data to ODS objects and Info Cubes.
Hope this helps u..
Best Regards,
VVenkat..

VENDOR CHANGES RECORD

Hi Experts,
I want to make the zreport of vendor changes record, which table should I refer.
Kindly suggest.
Regards
GR

XK04 is a standard tranaction in SAP which can be of your use.
regards,
Indranil

Is it possible to restrict changing records in customizing table in SM30?

Hi.
Is it somehow possible to set authorizations in a way, that a user could change only certain entries in a customizing table using SM30? What I want to achieve with this - we have an internationally used system, where consultants from different countries are working often on the same customizing tables and we would like to restrict tham to be able to change records only relevant for those countries, so they cannot change the records for other countries by mistake / on purpose. The records are usually identified by a certain "grouping" field (for instance MOLGA in table T511K or MOABW in T554S).
So far I couldn't find anything apart from the S_TABU_DIS object, which is too rough for this requirement.
Or maybe is there another way to achieve security in such a scenario?
Thanks in advance for any ideas.

Hi dusan,
1. If u are talking about SM30 for standard table,
   then i don't think there is any such standard feature / facility,
   for restricting.
2. If its our own Z Table, then we can go for events in table maintenance
and write our code for same.
3. But if such restrictions/validations are required,
   then its better to have a module pool for such thing.
SM30 is for very simple and basic table maintenance.
regards,
amit m.

How we can load change record in cube.

Hi,
How we can load change record in cube, (delta)
i need step by step in sap BI 7.0.

Hi Nitin
I hope you are asking about delta loads, if your datasource supports deltas then you can do only changed records from source to cube. To see the details goto ROOSOURCE table in ECC and find.
For further help search in SDN and help.sap.com, you can find n number of postiings about the same.
Thanks
Reddy

Tracking of changed records:sem6 -bps

Hi friends,
i want to track changes made to particular field cell, when it was changed and by whom..simply tracking history of changes made to records..
i have how-to documents that is for tracking of changed records in Integrated planning as well as for SEM3.5(on BW3.5).
Ours is SEM6.0 with BPS ( BI7 system). If anyone of you have, pls share.
thanks,
kumar

HI Kumar,
Even in BPS you will follow same methodolgy, create infoobjects for Uname, Timestamp and GUID (if needed). Then use a char derivation to derive those objects.
Note : If you use time, each delta will create a new reord with new timestamp and delta value.

HOW I CAN CHANGE RECORD NEVIGATION PROGRAMMATICALY?

i have a detail block it's property is set change record but i want it's go in next record when i press specified key.

Which key?
Maybe there's a trigger which you can put "next_record" in.
By the way, lose the capitals.

Update the change record in z table

Hi,
I am doing a module pool programming.If i change the particular record only changed record shd be updated in the z table.
How can i update only changed record in the database table in module pool.
Regards

Hi Rasheed,
Use this code to update ztable from the module pool table control, its working.
At screen flow logic
PROCESS BEFORE OUTPUT.
MODULE STATUS_8001.
LOOP WITH CONTROL TAB.
    MODULE PASS_DATA. "module to pass data into table control
ENDLOOP.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_8001.
LOOP WITH CONTROL TAB. "tab is the table control on the screen
    MODULE MODIFY_DATA. "module to modify data in internal table
ENDLOOP.
MODULE SAVE_DATA. "module to save the modified data into database table
Design a PF-Status with a SAVE button with function code 'SAVE'.
In PBO
MODULE STATUS_8001 OUTPUT.
SET PF-STATUS 'Z_TABCT'. "pf-status with appropiate buttons
* SET TITLEBAR 'xxx'.
DATA : LINE_COUNT TYPE I.
DESCRIBE TABLE ITAB
LINES LINE_COUNT.
TAB-LINES = LINE_COUNT + 3. "increment the line of table control dynamically so that table control becomes scrollable
ENDMODULE.                 " STATUS_8001 OUTPUT
MODULE PASS_DATA OUTPUT.
SORT ITAB.
READ TABLE ITAB INDEX TAB-CURRENT_LINE.
ENDMODULE.                 " PASS_DATA OUTPUT
In PAI
MODULE USER_COMMAND_8001 INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'BACK'.
      LEAVE TO SCREEN 8000.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_8001 INPUT
MODULE MODIFY_DATA INPUT.
MODIFY ITAB INDEX TAB-CURRENT_LINE.
ENDMODULE.                 " MODIFY_DATA INPUT
MODULE SAVE_DATA INPUT.
OK_CODE = SY-UCOMM.
CASE OK_CODE.
    WHEN 'SAVE'.
      MODIFY ITAB INDEX TAB-CURRENT_LINE. "update modifed records
      UPDATE ZTABLE FROM TABLE ITAB. "update database table from internal table
ENDCASE.
ENDMODULE.                 " SAVE_DATA INPUT
Hope this solves your problem.
Thanks & Regards
Tarun Gambhir

How to re-query changed record in multi-row block after update in a called form

Hi,
I have a form that I use to perform searches, which is a multi-record block.
The user can navigate to a record, press a button on call another form which provides
more detail, and allows update of the record.
If the user changes it, and returns to the original search form, how can I re-query the
changed record to update the fields on the search form.
Is there a way other than to re-query the
whole block - a built-in to just update on record if it's changed on the database.
If not, can I use globals to pass back the data (since only a few fields are updatable),
and change the record without effecting its forms status.
Many thanks
Bernie

BD,
I haven't managed to look at a solution yet, but the block is a large multi-row block,
with an ORDER BY, and since it can return a large number of records, there is a short
delay. I was hoping there was a way of just
re-querying the one record, which was displayed
in the second form for update.
I'll give the query a go, or might try and pass back some globals with the update values.
By the way, DML Return Value is an excellent feature, but only works against Oracle 8.
It basiclly adds the RETURNING clause to any DML statement (see SQL manual), so that if
a trigger changes/adds values you didn't provide, it will return them back to you
so the values in your form are correct.
I use a trigger on the DB to populate history fields (create/update,who/when) and
the PK sequence. Using this feature, those values are returned to the block and displayed.
Regards
Bernie

Change recorded piano tuned to 443Hz to 440hz?

Similar Messages

Maybe you are looking for