Change Remote Hostname on POS Interface

Hi,
After exaust search on the internet about how to change the Remote hostname feature on the Path Trace Buffer (J1), I didnt find the solutions. The Concern is that my customer want to See on their side with do show controller the Remote Hostname as other End Hostname, and not the PE locally connected to him.
Can anybody please help me to figure out this in order to hide the MPLS PE structure and let the CE's see each other Remote Hostname and other Remote features to be the order remote CE, instead of local PE? Eventually this is to emulate pure SDH over MPLS.
Please help.
PE-1#show controllers pos1/0
POS1/0
SECTION
LOF = 0          LOS = 0                            BIP(B1) = 0
LINE
AIS = 0          RDI = 0          FEBE = 0          BIP(B2) = 0
PATH
AIS = 0          RDI = 0          FEBE = 0          BIP(B3) = 0
PLM = 0          UNEQ = 0
LOP = 0          NEWPTR = 6625       PSE = 9517        NSE = 0
Active Defects: None
Active Alarms: None
Alarm reporting enabled for: SF SLOS SLOF B1-TCA LAIS LRDI B2-TCA PAIS PLOP PRDI B3-TCA
Path triggers active (no delay)
Framing: SDH
APS
COAPS = 0          PSBF = 0
State: PSBF_state = False
Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
S1S0 = 02, C2 = 16
CLOCK RECOVERY
RDOOL = 0
State: RDOOL_state = False
PATH TRACE BUFFER: STABLE
Remote hostname : blad810
Remote interface: POS7/1/0
Remote IP addr : 57.35.27.113
Remote Rx(K1/K2): 00/00 Tx(K1/K2): 00/00
BER thresholds: SF = 10e-3 SD = 10e-6
TCA thresholds: B1 = 10e-6 B2 = 10e-6 B3 = 10e-6
Clock source: line
Cheers.

Fabric ping timeouts occur when the Gigabit Route Processor (GRP) detects that a ping request is stuck in the ToFab queue (towards the switch fabric) of the Cisco Cell Segmentation and Reassembly (CSAR) application-specific integrated circuit (ASIC). This ASIC is responsible for slicing the packets into Cisco Cells before sending them through the switch fabric to the output line card (LC). Fabric ping failures occur when either a line card or the secondary GRP fails to respond to a fabric ping request from the primary GRP over the switch fabric.
http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a00800943b2.shtml

Similar Messages

How can I change the hostname after Oracle Database XE is installed?

I currently have XE installed and working on my ubuntu machine.
When I change the hostname of my machine, oracle database no longer connects and says "ORA-12505, TNS:listener does not currently know of SID given in connect descriptor".
Can anyone tell me how I can change the hostname of my machine and keep oracle database working correctly?
Thanks

Stopping, reconfig, starting the instance is one way, although that is somewhat like using petrol to kill ants.
The database instance pretty much does not care about the hostname setting. But the listener does- the installer finds the hostname and uses that in the setup bits.
As posted somewhere here, when using the 1521 default listener port, the listener.ora config file can just be moved out of the way. Another potential fix is setting the HOST=0.0.0.0 for the IPv4 "any IP" address setting, or setting it to the correct hostname. Or HOST= can be set to IPv4 address. For IPv6, have to use HOST=<hostname> and it must resolve, can't HOST=... an IPv6 address.
To move the listener file, stop the listener first. To change a HOST=... setting, also stop the listener first.
lsnrctl stop
mv $ORACLE_HOME/network/admin/listener.ora $ORACLE_HOME/network/admin/listener.bk0
# or
vi $ORACLE_HOME/network/admin/listener.ora
# change HOST=<whatever> to the correct value, or 0.0.0.0
lsnrctl start
sqlplus /nolog
conn system
... password ... Connected.
alter system register;
exit
# start the lsnr
lsnrctl start
# check the status, services
lsnrctl stat
lsnrctl serv
If the host has a wireless (or another NIC) that one does not want to offer up remote connections on, the 0.0.0.0 is not a good way to go either
Message was edited by: clcarter
typos

Connection between CRS 1 POS interfaces and 7600 POS Interfaces

Hi,
I am trying to connect a CRS 1 POS interface to a Cisco 7609 POS interface and i keep geting the following alarms, and the line protocol i s down on both device ends
RP/0/RP0/CPU0:at_crs_01#LC/0/2/CPU0:May 1 10:42:47.363 GMT0: spa_oc48[245]: %L2-SONET_LOCAL-4-ALARM : SONET0/2/0/2: SLOS cleared.
Please help!!
Attached are the configurations on the Devices

Hello Obiora,
if the two are connected in back to back: one side provide the clock with
clock source internal
the other side should take the clock from line
clock source line
I would change one of the two in clock source line
Hope to help
Giuseppe

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,change remotes, no change.Help please.

Purchased a new Apple TV and the remote double clicks each time I press the button. It worked fine during set up and for the first two days. I have since moved it and this problem started. Restarted,reset,unplugged,changed remotes, no change. Latest software update. This is really annoying. iPhone remote app works just fine. Any suggestions?

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

How to change the hostname was set/defined in SAP system?

Dear Expert,
My customer met a problem about that:
he defined his host name with small characters(lower case) "abc" when he installed the SAP system (Windows2003(x64)-Solman70SR4).
But in SM21, the title of sm21, the hostname was recognize as upper case "ABC".
in SM51, the hostname was also recognized as upper case "ABC"
in STMS, the tab of 'transport tool', it is recognized as lower case "abc" in TRANSDIR.
in SM59, it is recognized as upper case "ABC" in internal connections, but recognized as lower case "abc" in ABAP connections, such as TMSADM@<DB>.DOMAIN.<sid>
While in Java URL, it is recognized as lower case "abc". With my test, the Java URL is not case sensitive for the HOSTNAME part in HTTP link as I tested to change the hostname both in upper case and lower case in etc\hostname file, the URL both are working. (not sure if this is due to the test is with intranet or not).
Based on SAP note 611361, it seems that:
"Hostnames must be considered "case sensitive". That means
hostnames shall be used in the same case (upper or lower) in all
SAP configurations as well as in the network configuration (DNS
or etc/hosts). You must ensure consistent name resolving of the
hostname from hostname to IP address and back from the IP address
to the the same hostname (case sensitive match). See also note
129997."
Please help to suggest.
Many thanks in advance,
Perry Song

Section 4.13 "Checking the Consistency of the Host Name" in [This Upgrade Guide|https://websmp208.sap-ag.de/~sapidb/011000358700000353422008E] has a good explaination of what & how to check your hostname / parameter configuration.
on a windows box, another way to get the TCP/IP name is to type 'hostname' from a CMD window.

Handling of Down payments / advance payments retail POS interface

Hi all,
Does anyone know if there´s a best practice to handle down payments with POS interface?
thanks in advance
Mariana

Hi Mariana,
Pl use the following link:
help.sap.com/bp_retailv1470/documentation/EN/Store%20Business%20Offline%20EPOS_EN_PRES_V147.ppt
IDOC for down payment is WPUTAB01.
Entries will be as follows:
If a customer is making a down payment of Rs.1000/-
Cash a/c DR 1000/-
Customer or Site CR(Retail Stores if u dont maintain individual customers) 1000/-
When sales are closed say for example Rs.10000/-
Cash a/c DR Rs.9000/-
Customer or Site DR Rs.1000/-
Sales CR Rs.10000/-
In SAP u need to create a Special G/L with Indicator A and this special G/L will be assigned to your main a/c in Tcode OBXR.
F-29 Post Customer Down Payment ,F-32 Clear Customer ,F-39 Clear Customer Down Payment are the FICO transactions which will be used. Pl contact yr FICO
consultant for further details.
Hope this helps you.
Regards,
Mani

[HELP]i Cannot start emct after i change my hostname in linux ...

hi..
I clone my Oracle Enterprise Linux 5 in VMware,and then i change the hostname. that clone already installed Oracle database 10g release 2 enterprise edition. i can create a database, however i cant start emctl it said
+[oracle@ocp10g_mirror bin]$ ./emctl start dbconsole+
TZ set to Asia/Jakarta
OC4J Configuration issue. /u01/app/oracle/product/10.2.0/db_1/oc4j/j2ee/OC4J_DBConsole_ocp10g_mirror.drcjah.com_ocp10g_mirror not found.
thx...

Hi,
Edite the /etc/hosts and give the new hostname there and also give the new hostname in
[root@teng ~]# more /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=teng.domain.com
check the ping to hostname and hostname.domain.co is pinging.
Regards
Kaunain

POS Interface with SAP

Hi,
We are currently using SAP ECC6.0, not on IS Retail.
As we have quite a few POS machines being used in the business, we would like to interface POS with ECC6.0.
Is there any third party tools available in the market for achieving this solution?
Thanks
Ram.

Hi Ram
SAP offers regarding POS integration to IS Retail basically two options:
- POS DM (see http://wiki.scn.sap.com/wiki/pages/viewpage.action?pageId=113246846)
- classic POS interface direct in ECC (WPUBON/WPUFIB/WPUTAB IDoc's for POS transactions)
You want to interface directly in to a non IS Retail ECC system.
Question is what do you want to interface only financial postings or also goodsmovements?
How are the stores represented in SAP (customers/plants?)
The transaction logs (TLOG) info from the POS should be converted to a IDoc that will represent you functional needs on the ECC side.
For this mapping SAP offers SAP PO (proces orch), formally know as PI (or before that XI).
There are also several middleware solutions from third party vendors that can work with SAP.
In such a tool you have to map the TLOG to the desired IDoc you want to use in SAP.
(IDoc could also e replaced with a BAPI/RFC for instance).
Regards
Bob

Changing unix hostname + oracle10g

Before I change the hostname on my Solaris machine (which I believe I can do it without the need of rebooting the machine), can you guys confirm that the only two files i need to change on Oracle's side are tnsnames.ora and listener.ora?
Also, will I need to restart the database in such case?

only two files i need to change on Oracle's side are tnsnames.ora and listener.ora?Yes.
Also, will I need to restart the database in such case?No, just reload the listenera or restart the listener.
SJH
OCP DBA

POS Interface

Hi Friends
I am working on Batch Valuation. Using Standard IDOC WPUUMS for sales posting from POS. The standard IDOC do not have Batch field and In have enhanced it to insert batch number in article and billing documents. But still batch number is not getting updated for the purpose of cost price that is condition type VPRS. Standard sales order, delivery and billing process is picking batch level cost price. Can you please let me know any exit for sales inbound processing which can pass batch number in standard table MBEW to get correct valuation for VPRS during inbound processing.
Regards
Gautam Anand

Hello,
The standard POS interface idocs do not include the batch number because it is not relevant nor necessary for the POS sale transactions however, The batch number could be included using an enhancement segment.
Idoc type WPUBON it is possible to have the batch number using E1WPB02-SERIENNR, after which userexit "EXIT_SAPLWPUE_102" can be used the field e1wpb02-seriennr into g_t_imseg-charg. Using the enhancement
segments for WPUMMS you should also be able to add the batch number.
Goodluck.
Suhail Shaik

If changing the hostname of the Audit Vault Server version 12.1.2 please wait until the system reboots automatically.

Hi everyone
when changing the hostname of an AV Server in the newly released version 12.1.2, it can take up to 10 minutes from the time a user click ok on the pop-up message "Are you sure you want to reboot the Audit Vault Server for the changes to take affect" to the system actually shutting down for the reboot. The machine must not be manually rebooted as this will cause errors.
Some background information was provided by one of Oracle's developers for this product:
AVDF 12.1.2.0.0 uses Oracle Grid in Restart Configuration. This is needed to leverage the ASM infrastructure to create diskgroups etc. So, when a hostname of a system is changed, the entire Grid stack needs to be re-configured to work under the new hostname. This re-configuration is needed because Grid creates a lot of directories with the hostname in them and when the hostname is changed, it tries to look for critical configuration files under this new "hostname" and of course, they would not be present. Hence, when we change the hostname, an entire re-configuration of the Clusterware is attempted, at which point a new set of directories with the new hostname will be created by the Grid software.
This reconfiguration operation may take a few minutes to several minutes depending on the hardware/resource specs. This is because re-configuration of the Clusterware stack is a heavy-weight operation and takes time (It needs to shutdown all the CRS services and re-configure them and bring them back up). Hence, the long duration it takes before re-boot. You *MUST NOT* reboot it manually before the system automatically reboots -- otherwise the re-configuration operation will only be half-done. The chances of this re-configuration operation failing is very, very minimal (based on our tests). So, given enough time it _WILL_ complete eventually and the system _WILL_ automatically reboot. You just need to wait for it to happen.
Hope this will avoid any issues,
greetings,
Harm ten Napel

I may add it was my personal impatience that lead to this discovery: I was re-imaging my virtualbox install with the new 12.1.2 version (for testing purposes) and I want my AV server to be called 'auditvault', when it appeared nothing was happening (but there was) I rebooted the system manually with said results...

POS interface without IS Retail

Hello everyone,
We have ECC6.0 but do not have IS retail. There are some retail business in the organization, so we are trying to build a POS interface with development. Does anyone has experience with that? Does anybody know how the AR should be posted with all the sales data uploaded from POS?
Thanks a lot for the help!

To,
Dear Colleague,
The objective can be achieved by using SAP Middleware and you have to define Business Object, IDOC, BDOC, and sites and you have to activate all parameters as same as in both Source system and Target system,
Also try Groupware, FTP Server, TREX, for further compatibility as per your business process.

POS Interface with no POSDM!! Possible?

My client is planning to implement standard POS interface in IS Retail. I have worked several times with POSDM in order to post the Sales, Financial and Inventory Data into SAP, but all used standard POSDM. The client does not have POSDM license and just wants to post the sales and financial data.
Can this be done with standard POS Interface by posting WPUBON01, WPUFIB01 Idocs straight in IS-R?

Hi Raj,
My client is asking for POS to POSDM integration using SAP standard services (not IDOC or BAPI). You have mentioned using standard in your previous integrations. Can you please provide more information on the POS to POSDM that you have done so far. I have no knowledge in this integration. Any documentation or links that you can provide will be great.
Thanks in advance.
Regards,
Srinivas

Idoc erros.......POS interface.......

Hi All,
Using transaction WPER for POS interface i can see the errors associated with idocs, not processed due to errors. My requirement is to capture same error messages and show in output of my report against idoc number
Can anybody tell me from which table or function module , i can capture these error messages.?
Table EDIDS doesnt contain same error messages.
Regards.

Hi Micky,
Exact error messages showing in WPER can't be extracted from EDIDC and EDIDS tables.....
Regards.

Changing Applications hostname: Please ensure that Classpath is set properl

Hi,
I am trying to change the applications hostname on R12.
I am following the note "How to change the hostname of an Applications Tier using AutoConfig [ID 341322.1].
I have already did the step 1: Deregister the current Applications server using adgentns.pl
But, when I try to execute step 2: Update the Autoconfig Context file using adclonectx.pl, I am getting the following error:
Copyright (c) 2002 Oracle Corporation
Redwood Shores, California, USA
Oracle Applications Rapid Clone
Version 12.0.0
adclonectx Version 120.23.12010000.1
*Please ensure that Classpath is set properly*
The value of CLASSPATH is the following:
$ echo $CLASSPATH
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:
/ebs12/apps/apps_st/comn/java/lib/appsborg.zip:
/ebs12/apps/tech_st/10.1.2/forms/java:
/ebs12/apps/tech_st/10.1.2/forms/java/frmall.jar:
/ebs12/apps/tech_st/10.1.2/jlib/ewt3.jar:
/ebs12/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:
/ebs12/apps/apps_st/comn/java/classes
I opened the file adclonectx.pl and i can see that the message *Please ensure that Classpath is set properly* is displayed from only one place:
sub setJlibPath {
setADJavaPath();
setJDBCPath();
setXMLParserPath();
$CLASSPATH = $JDBCCLASSES . $cpDel . $XMLPARSERV2 . $cpDel . $ADCONFIG;
# print "\nCLASSPATH = $CLASSPATH\n";
if ( $ADCONFIG eq "" or $XMLPARSERV2 eq ""
or $JDBCCLASSES eq "") {
print "Please ensure that Classpath is set properly\n";
die "\n";
The error message displayed is related to the well formed variable classpath mentioned in the above procedure.
It is formed by the concatenated values of variables JDBCCLASSES, XMLPARSERV2 and ADCONFIG. Those variables are set in the following piece of code:
# setADJavaPath
sub setADJavaPath {
#try to get adconfig under stage area
if ($ADCONFIG eq "") {
$ADCONFIG = (-e "$CMDDIR/../jlib/java") ? "$CMDDIR/../jlib/java" : "";
#try to get adconfig under JAVA_TOP if it is set
if ($ADCONFIG eq "") {
$ADCONFIG = (-e "$ENV{JAVA_TOP}/oracle/apps/ad") ? "$ENV{JAVA_TOP}" : "";
if ($ADCONFIG eq "") {
# This could be a case of platform migration where we dont have the classes anywhere except in $AD_TOP/java/jar/adxlib.jar
$ADCONFIG =
(-e "$CMDDIR/../java/jar/adxlib.jar")
? "$CMDDIR/../java/jar/adxlib.jar"
# setJDBCPath
sub setJDBCPath {
#try to get ojdbc14.jar under stage area
#Bugfix 6773412
#for 11g database ojdbc5.jar should be considered
if ($JDBCCLASSES eq "") {
$JDBCCLASSES =
(-e "$CMDDIR/../jlib/ojdbc5.jar")
? "$CMDDIR/../jlib/ojdbc5.jar" : "";
if ($JDBCCLASSES eq "") {
$JDBCCLASSES =
(-e "$CMDDIR/../jlib/ojdbc14.jar")
? "$CMDDIR/../jlib/ojdbc14.jar" : "";
if ($JDBCCLASSES eq "") {
$JDBCCLASSES =
(-e "$CMDDIR/../jlib/jdbc14.jar")
? "$CMDDIR/../jlib/jdbc14.jar" : "";
if ($JDBCCLASSES eq "") {
$JDBCCLASSES =
(-e "$CMDDIR/../jlib/jdbc14.zip")
? "$CMDDIR/../jlib/jdbc14.zip" : "";
#try to get jdbc under JAVA_TOP if it is set
if ($JDBCCLASSES eq "") {
$JDBCCLASSES =
(-e "$ENV{s_af_jlib}/jdbc14.zip")
? "$ENV{s_af_jlib}/jdbc14.zip"
# setXMLParserPath
sub setXMLParserPath {
#try to get xmlparserv2 under stage area
if ($XMLPARSERV2 eq "") {
$XMLPARSERV2 =
(-e "$CMDDIR/../jlib/xmlparserv2-904.zip")
? "$CMDDIR/../jlib/xmlparserv2-904.zip" : "";
if ($XMLPARSERV2 eq "") {
$XMLPARSERV2 =
(-e "$CMDDIR/../jlib/xmlparserv2.zip")
? "$CMDDIR/../jlib/xmlparserv2.zip" : "";
if ($XMLPARSERV2 eq "") {
$XMLPARSERV2 =
(-e "$CMDDIR/../jlib/xmlparserv2.jar")
? "$CMDDIR/../jlib/xmlparserv2.jar" : "";
#try to get xmlparser under JAVA_TOP if it is set
if ($XMLPARSERV2 eq "") {
$XMLPARSERV2 =
(-e "$ENV{s_af_jlib}/xmlparserv2-904.zip")
? "$ENV{s_af_jlib}/xmlparserv2-904.zip"
The issue is that the 3 procedures mentioned above can't find the files thaey are looking for, and finally the 3 variables are set in null.
I found those files in other locations:
XMLPARSERV2=/ebs12/apps/tech_st/10.1.3/lib/xmlparserv2.jar
JDBCCLASSES=/ebs12/apps/tech_st/10.1.3/jdbc/lib/ojdbc14.jar
ADCONFIG=/ebs12/apps/apps_st/appl/ad/12.0.0/java/jar/adxlib.jar
I run export for them:
export XMLPARSERV2=/ebs12/apps/tech_st/10.1.3/lib/xmlparserv2.jar
export JDBCCLASSES=/ebs12/apps/tech_st/10.1.3/jdbc/lib/ojdbc14.jar
export ADCONFIG=/ebs12/apps/apps_st/appl/ad/12.0.0/java/jar/adxlib.jar
and finally I execute again the step 2 of the procedure to change the hostname ... but the error is the same:
adclonectx Version 120.23.12010000.1
*Please ensure that Classpath is set properly*
Do you know how to solve this error ?
Thanks in advance
Regards,
Sergio Maestri
Edited by: Sergio Maestri on 06-dic-2011 7:13

>
What echo $CLASSPATH return?$ echo $CLASSPATH
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:
/ebs12/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:
/ebs12/apps/apps_st/comn/java/lib/appsborg.zip:
/ebs12/apps/tech_st/10.1.2/forms/java:
/ebs12/apps/tech_st/10.1.2/forms/java/frmall.jar:
/ebs12/apps/tech_st/10.1.2/jlib/ewt3.jar:
/ebs12/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:
/ebs12/apps/apps_st/comn/java/classes
But, the message displayed is related to the procedure "setJlibPath" contained inside the file "adclonectx.pl"
sub setJlibPath {
setADJavaPath();
setJDBCPath();
setXMLParserPath();
$CLASSPATH = $JDBCCLASSES . $cpDel . $XMLPARSERV2 . $cpDel . $ADCONFIG;
# print "\nCLASSPATH = $CLASSPATH\n";
if ( $ADCONFIG eq "" or $XMLPARSERV2 eq ""
or $JDBCCLASSES eq "") {
print "Please ensure that Classpath is set properly\n";
die "\n";
else {
The above procedure is called always you execute adclonectx.pl, and the reference CLASSPATH in the message error is about the variable CLASSPATH that the mentioned procedure try to set a value. It's not related to the ambient variable CLASSPATH... at least is what I understand ..
I think this is a bug, because the files needed to find in order to set the values of DBCCLASSES, XMLPARSERV2 and ADCONFIG variables are located in other places.
>
Also see:
https://kr.forums.oracle.com/forums/thread.jspa?threadID=2271869
I saw it, but it's related to database hostname and it doesn't content any solution to the issue ...

Change Remote Hostname on POS Interface

Similar Messages

Maybe you are looking for