Change report page size dynamically -URGENt

Hi,
I am developing one report for super market, and as per the req. of super market I want to control the page size during the runtime only.
Pleas help me regarding this.
Thanns in advance.
Sharad

You can't actually change the page size.
But there are some things may help in this respect.
In the report layout you can have some frames that include different layouts for the same data and print those frames conditionally.
Or you may use two different .rdf for two different page sizes.

Similar Messages

  • How do you can change the page size of a pdf in MAC?  I have multiple pdf documents of different sizes that I want to combine.

    Help.  How do I change the page size of a pdf in MAC?  I have multiple pdf documents in varying sizes I would like to combine and print.

    There's no real need to do that. A PDF can have pages of different sizes.
    On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

  • How can I change the page size of a pdf so i can view it on my iphone more clearly?

    How can I change the page size of a pdf so i can view it on my iphone more clearly?

    I think there may be more to this question than you say.
    If your PDF page is say, 8 x 12 inches, and you found a way to scale it to 25%, changing it to 2 x 3 inch, shrinking everything on the page to quarter size - wouldn't it look exactly the same on the iPhone? It's just going to be the same as zooming.
    Or were you hoping for something more like in Word, where changing the page size keeps everything the same size and spreads it over more pages? That isn't something you can do.

  • How do I change the page size of a pdf?

    I'm trying to send a manuscript to a printing service in another city. It was produced using Microsoft Publisher. In Acrobat Pro I changed the page size from the default (8 1/2" x 11") to the size of my finished document --- 7.8" x 10". Yet when I send the manuscript to the printer it's still the larger size. I've tried right-clicking on the pdf printer and changing to a close approximation (7.5" by 10"), which is listed as one of the available alternatives, but it won't let me change it. What am I doing wrong?

    There's no real need to do that. A PDF can have pages of different sizes.
    On Fri, Jun 6, 2014 at 4:11 AM, christine rambo <[email protected]>

  • How can I change the page size of a scanned PDF document?

    How can I change the page size of a scanned PDF document?
    I scanned a 50-page document with an HP 5610xi All-In-One using the software that comes with it: HP Scan Pro. Though the physical document has standard 8.5" x 11" pages, the PDF resulting from scanning has page size set to 35.42 × 48.67 inches (according to Preview's "Tools > Inspector". I want to resize the pages to 8.5" x 11". Shouldn't Preview be able to do that with "Tools > Adjust Size..."? When I try, the menu option is grey so I can't select it.
    I'm using Preview Version 4.2.

    Thanks for the insight; that explains why it's the wrong size. I selected 300dpi scanning (which is the default, actually), but HP Scan Pro evidently created a PDF with 72dpi indicated. I want it fixed because I want to distribute the file to other people and have them able to print or display it without problems.
    I still don't know why Preview won't let me change it, but your question about whether I wanted to print it did lead me to find a workaround: "File > Print" and "Save as PDF..." saved it with the correct page size.

  • How do you change default page size in pdf?

    I purchased CREATE solely to create a pdf file from a scanned document. I created the PDF but the default page size is 30.15 x 20.83 INCHES. I cannot seem to change the page size. I called support services 4 times (talking with Sakthivel, Shashank, Medhet, and one other.) Each time they indicated that they would connect me to the correct people and they disconnected. I want some answers please. This seems to be a simple question. Is Adobe CREATE merely a scam?

    CreatePDF, perhaps?  Try the forum at http://forums.adobe.com/community/createpdf

  • How to change the page size of a replicated container?

    Hi, I would like to change the page size of dbxml 2.3.10.10 containers in a replicated environment.
    This is what I tried so far:
    1) dbxml_dump/dbxml_load (bot utils not usable in a replicated environment)
    2) db_dump/db_load. db_dump works fine. db_load seems to work fine, since it succesfully creates a database/container from a dump file. But it does not correctly initialise the internal dbxml structures since the database/container can not be opened, although getContainers works...
    Besides writing my own dump/load clients, is there any other option to change the page size of an existing container?
    Regards,
    Jacobus Geluk

    Hi George,
    dbxml_dump seems to work fine, but ends with this message:
    DATA=END
    dbxml_dump: Non-replication DB_ENV handle attempting to modify a replicated environment
    dbxml_dump: dump <container name>.dbxml: Error: Unexpected error opening Configuration DB
    dbxml_load more or less has the same error...
    I am currently writing a little Java program that simply dumps all XML documents of all containers in a directory structure...
    That would work as long as the file system can handle it...
    I suppose dbxml_dump/load could be made to work quite easily by just copying their sources and specifiying the replication settings...
    All utilities that cause log activity, that currently do not support replicated environments, should support replicated environments that simply use the default replication transport mechanism. With some additional command line options like --sites it would work...
    Regards,
    Jacobus

  • Can anyone help me to change the page size to 4"' by 6" in Output designer 5.6

    I want to change the page size of my output designer to 4" height and 6" width. Can anyone guide me with the steps. Also my test presentment is a HP Laser Jet printer

    maybe that application add in disable after office upgrade
    try to manage add in related to that banking software
    https://support.office.com/en-US/Article/Enable-or-disable-addins-in-Office-programs-3e533d0f-a6cf-44b7-b6b4-3d9185b5e025
    https://support.office.com/en-us/article/View-manage-and-install-add-ins-in-Office-programs-16278816-1948-4028-91e5-76dca5380f8d
    I suggest you also contact Misys support for more troubleshoot option
    share with us the update

  • Changing my page size from American A4 to UK A4 shifts everything on the page, if I want everything on the page to stick to the top left rather than shift around, what do I do?

    Changing my page size from American A4 to UK A4 shifts everything on the page, if I want everything on the page to stick to the top left rather than shift to the right and down, what do I do?
    Using Indesign CS6.

    @Gabrielle – if you change the size in your document setup, pages always crop from the center of your spread, if you are using facing pages:
    Uwe

  • Setting Report Page Size in Ecplise Designer 1.0

    Hello all,
    I am trying to use Crystal Reports for Eclipse V1.0, and when using the ReportDesigner, I can't find a way to set the size of the report page I am laying out.  by default, it seems to be an 8.5 x 11 inch page, but it defaults to Landscape mode.  Anyone know how to change the layout of a report to be Portrait format?
    Thanks,
    Matt

    Upgrade to version 2 and Test again.
    Also check the sample applications from above tabs.

  • Change default page size

    When printing a front panel the default page size is letter. My windows printer has A4 as default page size. LabView always overrides my printer's default page size to letter.
    The problem: I want to print programmatically the front panel. With the page size letter I get a broad left and bottom margin on the A4 page. I didn't find a possibility to change the default page size programmatically or manually.
    I use LabView 2011 on Windows Vista.
    Thank you for your help
    Stefan

    Hi Stefan,
    i couldn`t find a programmtically way to set the page size to A4 in LabView. You can change parameters like orientation and print method (Postscript..), but i couldn`t find methods to determine windows printer dialog options.
    A possible work around would be, to use System Exec VI to perform a print command on a prior LabView created report file (Word or PDF). There are several command line print tools on the web.
    Kind regards
    Thomas Frank

  • How to Change Report Font Size in 11i

    Hi,
    Please let me know how to change font size of an existing report in Quick steps.
    Basically the printed report font size is too small. We change the font size from the printer but still it dose not change.
    We have 11i on Unix Server and a dot matrix printer.
    The report is character based and Report Builder shows Courier 10, print style is Portrait. We need it to be 12-14.
    Thanks!

    Hi,
    Refer to the following document.
    Note: 467568.1 - How To Change The Font, Size, or Page Layout of Standard and FSG Reports
    https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=467568.1
    Regards,
    Hussein

  • Changing the page size in smart form

    hi to all experts,
    im printing barcode of size 1x3 how can i change the page format from A4 size to 1x3

    hI,
    it is possible to create a new page format using tcode SPAD
    go to full administration from the applitool bar. go to device types tab
    1) create a page format
    2) under device type : include the page format in SWIN.
    now go to devices/servers tab
    1)create a new output device here. and use it in program.
    Edited by: kat k on Feb 25, 2009 9:46 AM

  • Change pdf page size to uploaded file page size

    I've added a new page size in the PDF printer -- but when I identify a file that is being converted
    in Acrobat Pro9, the finished pdf is always 8x11. I can't find any page size adjustment in preferences
    or page setup,properties, etc.  Please help

    >How do I change the pdf page size to print on the larger size without the blank, empty margins above and below the page?
    You can't. That would require changing font sizes and document reflow. 8.5 x14 isn't proportionate to 8.5x11.

  • Change/set page size - feature missing

    Since I'm using iCloud and iWork on the web 90% of the time and often create new documents I would need to use A4 instead of the letter size. BUT, iWork beta always makes new docs in the Letter page size. The only way to get it to be A4 is to change it on iOS or Mac (which then syncs back).
    Please release a fix/feature.

    Did you change your OS to a 64-bit version and is your print driver in sync with your OS?
    Kind Regards, Rich ... http://greatcirclelearning.com

Maybe you are looking for

  • Home Network and accessing all hard drives on the network

    In 10.4, when connecting to another computer on my network, I was able to connect to any disk drive that was connected to any computer on my network. With 10.5, it seems I cannot do that. All I seem to be able to connect to is the home account (in my

  • Unwanted printing of advanced payment when printing a sales order or pick

    It will be great to have an option of disabling the automatic printing of the advanced payment incoming payment when printing a sales order or invoice. The option is currently not available on the document printing options.

  • Newbie having trouble creating a Slideshow with the Animation Panel.

    I know it's a much more complicated/advanced way to create a slideshow. But, I know it can be done. I will explain exactly what I do, the steps that I take. In my own newbie opinion, I think I'm just missing a step somewhere. Maybe I'm missing two or

  • Broken back glass on iphone 4

    I've dropped my iphone4 and the back glass has broken, although the phone still works fine.  Has anyone had their back glass repaired by Apple and know how much it would cost?  I've made an appointment at the store in Covent Garden London but they ca

  • Unwanted separator page

    Hello all,    I have a Photosmart C7250 and I have it hooked up wirelessly to two different computers. My laptop, which is a Dell XPS M1330, works flawlessly, but the from my desktop, which is an HP Pavillion m8020n media center PC, the printer spits