Change request btw 2 different BW systems version.

Hi all,
can I export a change request between an development BW 3.5 system and other production system BW 7.0?
The system don't actually have an RFC connection and the change requests have been made like local ($TMP).
Thank U for answers.
FP

Hi,
Are you talking about local transport requests ? If so these cannot be transported. For the request to be transportable the settings have to be done in TMS. Only then transportable requests have to be created.
Also for transportation, we dont need to have RFC connectivity between the systems, but the correct landscape has to be set up.
Regards,
Pramod

Similar Messages

Change Request Flow In a Three System Landscape --- PLZ DO REPLY

Hi Experts,
I am new to SAP and have this doubt;
Suppose we have a three system landscape with DEV, QTY and PRD systems in it.
Say we create a new change request in DEV system. So to transport it to QTY we will release that request from DEV using T code se01 .
Now the request will come in QTY systems queue and we will login to the appropriate QTY client and import this request into the QTY system.
No my basic doubt is, after the testing in QTY how do we move this request to PRD system ?
Do we again release this request from QTY system using se01 or we need to go at the OS level in the QTY system and manually add this change request in the PRD system buffer ? ( Please send if any reference link is there)
I will really appreciate any info in this regard.
Thanks in advance.
Regards,
Mandeep

Hai Mandeep,
 First Thing,
 -->If you are maintaining a common transport directory,the released change
 request will be exported in that common transport directory..
 --->Now you just enter in to the server(which is Transport Domain
 Controller).
 --->In that go to Import Overview,now your QA server has one import req.
 you just click the req. and import that req..
>Now if you want to import the same req int o PRD.,Enter in to PRD
 server.Go to tcode STMS_IMPORT, In the top go to
 Extras>Other req.>add..click this and add that particular
 req.that you want to import in to PRD server..
 --->select that req and import that req...
Thanks & Regards,
Gopinathan.T

Change Request Management without Transport Managment System

Hello,
we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
Many thanks in advance.
Jenny

Hi Jenny,
you can do this with the following activities in your custom Business Transaction (BT):
- remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
- remove the action from the actions depending on user status (TA: starting from SPRO)
- unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
Please let me know if you need more details, otherwise please reward the forum points
Regards ,
Giampaolo

Why is CS6 Zoom change window size is different then previous versions?

Why in CS6 when zoom changes window size and a folating window fits in Photoshop window or on other display screen do I get scroll bars where a select all selection marching ants are not visible on all four sides till I drag out the window to get rid of the scroll bars so I can see all of marching ants. In preious versions of Photoshop space for scroll bars is present but there are no scrool bar, select all marching ants are visible on all four sides when an image's window fits in Photoshop window or on second display. Is there a way to make CS6 work like previous versions? Also if I just open a document and Photoshop fits it to Photoshop window or second display the floating window is correct without scroll bars. Zoon add then even when not needed....

Without manually resizing each open document window on my Mac, Photoshop 13.x would be simply unusable.
I hadn't posted anything on the subject because the system on which I run Ps 13.0.1 is based on a laptop (MacBook) literally rescued from the trash and with minimal specs. The graphics card is not even involved in processing.
I put up with it because I'm basically using it to run ACR 7.2RC1, then bring the converted and ACR-adjusted onto my regular working machine running CS4.
In a nutshell, nothing will make the window fit the main monitor, not Fit To Window, nor 100% view, nor any shortcut.
I need to drag the window manually from the lower right-hand corner in order for it to fit the monitor. Otherwise, there are substantial gaps on the right and at the bottom. I never run in tab view.
For the sake of thoroughness:
2007, 2GHz MacBook 2,1, Intel Core 2 Duo, 4 GB of RAM (can use 3 GB), 160 GB internal boot disk, dedicated FireWire400 external HD for Ps scratch disk, external Time Machine HD. Dual external monitors + built-in laptop screen Snow Leopard 10.6.8.
The Mac-Intel is used for no other purpose than running ACR 7.2RC1 and the only other application I occasionally run on said Mac-Intel is TextEdit.
My main working machine is a Power Mac (PPC) G5 Quad with 16 GB of RAM, on which 11.0.2 is the last version of Photoshop to run, so I have the Mac-Intel system described above just to run ACR 7.x under Photoshop 13.0.1. I convert my raw files in ACR7.x open them in Ps 13.0.x and save them via Ethernet to an external HD connected to the G5 Quad for further processing in CS4.
2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; intrusive Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.

Transporting change request's

Hi,
a developer has changed a include. Also he has saved the changes in a change request (e.g. XA1817). Few days later I have also changed some lines on the same source code as my colleague and I have saved it on another change request (XA1819).
Now what happens if I transport my change request (XA1819) before transporting the change request from my colleague (XA1819) in productive system?
Thanks
Michael

If the change request was not released, the system should not have allowed you to change the object without putting a change request underneath the request of the other users. Check your colleagues transport request, your request should be apart of it. Then can be released and the changes will move under one transport.
If you see the same object under two different transport requests which are both not released and not tied to each other, then you have a real problem.
I assume that you transport request is tied to your colleagues, check SE10.
Regards,
Rich Heilman

Unable to release the change request from se01

HI All,
Recently i had applied Rsecnotes as per sap recommendation in EWA Report and I implemented successfully in DEV System. But, When i try to release the change requests from SE01 in (DEV System)
it is giving the error message "Object Func<objectname> is inactive". I have unlocked all the request and checked but still problem exsist.
Please help me to release the request and implement in the landscape.
Thanks,
Rajesh N

Hi,
Activate the object using se03 and then relaese the request
thanks

How to notify (email) Change Manager when new Change Request is created

Hi there, I am battling to generate an email when a developer creates a Change Request directly in the SolMan system. When he creates a new Change Request via CRMD_ORDER by filling in the Sold-to-Party, Change Manager, iBase etc., the message is automatically in 'To Be Approved'. I want to notify the Change Man ager as soon as a new Change Request has been submitted, but when I check the Actions tab in the message, no email action is listed or executed. I have edited SLFN0001_STANDARD... in SPPFCADM with conditions set. How can I create a email notification for the Change Manager as soon as a Change Request is in To Be Approved status?
Message was edited by:
Bernardt Nel

Hi,
Create a action definition with the following information:
Processing when saving.
No restriction.
Check Schedule Automatically.
Check Partner-Dependent.
Select Partner Function for Change Manager.
Determination Using Conditions that Can be Transported.
Then you have to create an Start Condition such as; userstatus = to be approved.
No scheduled condition is needed.

Change request released & but not visible

Hi kaushal & all,
Customizing change request is released from development system & data file & co-files are not generated which inturn i can't manage to
see the request in queue.Also log is not visible for the released request.

Hi,
Customizing change request is released from development system & data file & co-files are not generated
For the above reason only two possibilities if STMS configuration is proper.
- Request is local request
- No target system is define in released request.
in your development system run se01 -> in display tab enter request -> press enter.
double click on request -> select properties tab -> make sure target system indicate your QAS system.
regards,
kaushal

STMS_QA - allow transport of change requests

Hi,
we have configured the quality assurance tool (TMS). Now the users must - allow - the transport of change requests into the productive SAP-system via
transaction STMS_QA.
If we transport objects via "transport of copies" (from another SAP-system) the QA doesnt work. The users can avoid the QA-System.
Does anyone know how I could define the transport routes to avoid this situation?
Thanks
Michael

put the Objects in this ( from another system ) "transport of copies" request and give the TARGET System name .
It is simple process , if u are doing first time do it carefully .
after doing the process check the TARGET system.
Regards
Prabhu

Change Request without development

Is there a way to process a Change Request without actually going through development? We have a situation where some development work will actually be done in another system not linked to Solution Manager, but yet we would like to be able to manage the change request for those changes in Solution Manager. (The idea being that all change requests will be managed in the one Solution Manager system.) As our current system is setup right now, we cannot get past the status of "In Development" without actually making any development changes.
Are there any suggestions on how to by-pass this?

Hi Rita,
actually i have the same problem and i think about how to connect non-sap-systems to the change request in sap solution manger.
How did you connect theses systems to the solution manager? What did you do in transaction smsy?
Did you create a project and a maintenance cycle for the change requests of your non-sap-system?
Is therer a possibility to report theses change requests?
Thanks in advance,
Jens

Returncode of Transporting a change request

Dear developers,
do you know how to check the returncode when transporting a change request to test or productive system.
In my case I have the special problem that change requests will be transported in an async way so that the developer could not check in the SAP solution manager whether the transport is error free or canceled with an error.
Is there a way to switch the transport management in the solution manager to a synchronous mode?
Best regards,
Jens

Hi Ganesh,
Can I ask something about inactive object here?
I applied notes with SNOTE. But all objects are inactive.
When I activete them, The system requires accesskey.
How could this happen? And any solution for this?
I can't deapply the notes any more. coz it's bug fix for SNOTE.
If I do this, the system will be inconsistent, this happened beffore
Thanks
kaz,

InfoCube Error Message: Choose a change request with target system BWQ

Hi experts,
I have a problem when I want to edit an InfoCube created by other developer. The error message received is as follow:
"Choose a change request with target system BWQ".
When I click on the Documentation (F9) button, the detailed message is:
"Message no. TK511
Diagnosis
The selected change request BWDK901086 has target system .
However, the objects you edit can only be recorded in change requests with the target system BWQ.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System response
The selected change request BWDK901086 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request BWDK901086.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System ."
Can someone helps me to solve this problem?
Thanks!

hi Fullham,
try se09/10 and find request BWDK901086 (use binocular icon) or se03. then double click that request, go to tab 'properties', hope you will see 'Target System' system there, click 'edit'/pencil icon and change it to BWQ.
you may need to change the owner (which may not authorized), ask basis help if necessary.
hope this helps

Different change request about the same object

Hi Gurus,
I have some doubts about CR (change request) from one system to another, such as from development system to quality or quality to production.
If I have 2 or more CUSTOMIZING CR about the same object Can I say that they are however identical (they contain the same information)?
For example on the customizing table:
record1 contains value 'A' --> CR number 1 is opened
record1 contains value 'B' --> CR number 2 is opened
If now I transport CR number 1 I transport value 'B'.
And the same if I transport CR number 2.
Is it correct? Both CR points to the actual value of the record?
Instead if I have 2 or more WORKBENCH CR I know they "remember" the history of the modifications:
For example on a program with only 1 istruction:
data: x.
--> CR number 1
data: x,y.
--> CR number 2
What happen If I transport the 2 CR simultaneously (selecting both from STMS) ?
What will be the result in quality/production system? Which CR "wins"?
Thanks in advance
Guido

At time of release from DEV, the current object version or table content is written into the transport data file, thus "detached" from further changes in DEV.
Now if two transport requests 1 and 2 contain the same object in two versions (older and newer) and are being imported into QA, the following scenarios are possible:
- 1 is imported first, then 2: newer version will be in QA -> OK
- 2 is imported first, then 1: older version will be in QA -> not OK
- both are imported at same time: newer version will be in QA -> OK (STMS checks when the requests were added to the import queue and sorts accordingly)
Thomas

Add new system to an Existing project in Change Request in Solution Manager

HI,
Is it ok to add new systems and remove systems to an existing Project in Solution Manager with Change Request Management activated?
Currently, Change request is already set-up in our solution landscape, however, a new BI Dev and QA systems were created to replace the old Dev and QA systems that was initially set-up in our Charm. Can you please share with me the steps that I need to do to successfully remove old Dev and QA from Charm and replace them with the new systems? Is it safe to do this in an open project and maintenance cycle?
Thanks!

Hello,
Please, check the topic "6. Changes in the logical components of a project where Charm is already activated" of the link below:
/people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
I think that this link can help you.
Best Regards,
Diego Fischer

How to set a default target system in a change request

Hello,
I would like to set up a default value for the target system when I create a change request,
for example, if I create a CHR in "DEV" system, it would auto fill the "Target" field with "TST"
I tried to look for TPPARAM parameters or some Global ones,
but with no luck
Anyone got a clue how to do it?
Thanks.

Hi Elhanan,
The next system depends on the transport route.
and the transport will follow the route assigned. this again depends on the transport layer assinged to the development package of the object.
so the assignment is like this.
Dev object > Development package (previously called dev class) > Transport layer > Transport Route
for more information, please see the help.sap.com software logistics part.
http://help.sap.com/saphelp_nw04/helpdata/en/60/e3fcfae36811d184810000e8a57770/frameset.htm
Hope this helps,
Debasis.

Change request btw 2 different BW systems version.

Similar Messages

Maybe you are looking for