Change Request Errors

I am enable to Release My change request ,it is showing me errors when i am trying releasing the request can anybody help me out .

Hi
Please be specific, what is the error that you are getting.
If it is
1) Update error occurs while releasing the change request for objects.
Then implement sap note 846128
2) Check if the chage request is generating a short dump.
With that, analysing becomes easier.
3) You enter requests which are approved via request workflow. During the release via the workflow no checks of the request are carried out, so that this can result in problems.
Refer note 501335 for this issue.
4) The error could be because, In Change Request a transport request is released using an action.
For this refer note 1117422.
Hope this helps
Regards
Shilpa

Similar Messages

Re:Error while importing the TP from dev to quality through change request

Hi Guys,
We have implemented change request and upgraded for SP 15 support pack
when the user tries to import through urgent correction by selecting pass correction to test the TP is not getting imported, when i checked the log it is saying
System cancel RFC destination SM_BQ2CLNT100_TRUSTED, Call TMW_SET_PROJECT_SWITCHES: No authorization to logon as trusted system (Trust ed RC=2).
You cannot import any requests for project BD2_P00001 at the moment
Then i went to show project status switches and changed as "Request can be imported" from " request cannot be imported", then the user is able to import the UC from the task list,
But ideally the status switches should be " request cannot be imported" so that the TP can be imported only through change request.
kindly give ur inputs as it is very urgent.
Regards
Raju

Hi Jith,
First of all try to consolidate all your objects in a single TR and then move to Q from D.
In this case check for the list of objects that you have in your TRs. If TR 3 have all the Objects that were in TR1, TR2, then transporting TR3 alone will work.
Also, you can find the information related to the elements that were missed in your TR1,TR2 by following process.
1. Go to your transport Logs and then to the entries marked as Error.
2. There you will find the Query Element Ids, copy them
3. Now, go to Table(Se16) RSZELTDIR, there enter those query elements.
Now, you can able to find the elements that you have missed in your TRs. Hope this helps you.

Error while creating change request via solman support desk message

I have configured CHARM and my change req. is working for urgent correction, I have tested the entire workflow.
however when i try to create a new change req. via support desk message --> create a change request open
I get following error
An action was terminated due to an exceptional situation.
Message no. SOCM_ACTION_LOG 090
Diagnosis
An exception has been triggered in PPF action processing.
System Response
Action processing has been terminated. The status of the transaction is still incorrect.
Procedure
You cannot execute the action until the cause of the error has been removed.
The error messages will be kept until the transaction is next checked for subsequent analysis.
Procedure for System Administration
If necessary, analyze other messages in the application log for the incorrect transaction. To analyze the termination, you can activate the breakpoints in the checkpoint group socm_exception.
Additional Information:
Exception CX_SOCM_PRECONDITION_VIOLATED occurred (program:
CL_HF_HELPER==================CP, include:
CL_HF_HELPER==================CM00A, line: 29).
pls help

Hi Yunus,
Your probably have changed the transaction type SLFN to a the customer namespace Z or Y. If this is the case you MUST also "Define Mapping Rules for Copy Control".
Goto SPRO -> SAP Solution Manager -> Scenario-Specific Settings -> Change Management -> Change Request Management -> Extended Configuration -> Change Transaction -> Change Transaction Types -> Copy Control for Change Request Management -> Define Mapping Rules for Copy Control.
Once at this point in the IMG make a copy of SLFN -> ZLFN. This will resolve your problem.
Kind regards,
Latief

Error in Viewing Change Request

Hi Experts,
I am new to MDG I created my First "Custom Master Data Object in SAP MDG (Master Data Governance)" using a SAP How to Guide.
I Have entered data into the form and click on submit. Post which i get the following screen. PFA
Post which I Click on "Show My Change Request" I get the following screen. PFA
On Click of the change Request I am getting the Following Error Screen. PFA. Can any one tell me what could be the problem is it some role missing or some configuration issue or some thing else? Please help me out.

Hi Abdullah,
PFA the Screen Shot of SWETYPV bellow :
I am Also Attaching the ST22 Export the error is displayed. PFA the screen Shot.
I Hope after these screen shots i am more clear about the problem.
Can you explain what exactly is the error?
Cheers
Piyas

InfoCube Error Message: Choose a change request with target system BWQ

Hi experts,
I have a problem when I want to edit an InfoCube created by other developer. The error message received is as follow:
"Choose a change request with target system BWQ".
When I click on the Documentation (F9) button, the detailed message is:
"Message no. TK511
Diagnosis
The selected change request BWDK901086 has target system .
However, the objects you edit can only be recorded in change requests with the target system BWQ.
The correct target system is determined from the package and transport layer to which the object concerned belongs.
System response
The selected change request BWDK901086 is not used to record the objects.
Procedure
Either choose a different change request or change the target system of the change request BWDK901086.
From the prompt window for change requests, you can display all requests you can use by choosing Own requests.
Alternatively, you can create a new request by choosing Create request.
For more information, see the SAP Library under BC - Basis Components -> Change and Transport System ."
Can someone helps me to solve this problem?
Thanks!

hi Fullham,
try se09/10 and find request BWDK901086 (use binocular icon) or se03. then double click that request, go to tab 'properties', hope you will see 'Target System' system there, click 'edit'/pencil icon and change it to BWQ.
you may need to change the owner (which may not authorized), ask basis help if necessary.
hope this helps

MDG-F: Error when opening the Change Request

Hi MDG Experts
In MDG-Finance, when i'm opening the Change Request (CR Type: 0G_S002), to "finalize processing", i get this error message: "Object ID 060822EA65231EE3A7DB2A05A0AB8E61 is not valid". As a result the single processing option does not pull the master record that was added in the Create Change Request option for submitting for approval.
I'm not sure what this error is and how to resolve it.
Seeking your help.
Thanks in advance.
Regards
Neelesh

Hi Kiran
Thanks for your prompt response. The entity search option that you mentions works successfully.
However, in case of manual replication, i'm still facing a challenge.
After executing the Manual replication option, the data isn't getting replicated to back-end ECC. Infact, in DRFLOG, the log is all green for "Process Outbound implementation GL Master Idoc (1012)".
Am i missing something here ?
Regards
Neelesh

INTERNAL ERROR in Change Request form of an employee in MSS on EP 5.0

Hi All,
Need some urgent help regarding an issue with Change Request forms in MSS business package deployed on EP 5.0.
Iam getting an error message as "Internal Error" whenever iam trying to open a Change Request form for an employee in MSS in EP 5.0.
The Change Request form basically Triggers a Workflow in the backend.
any help regarding the same will be really appreciated.
Regards,
Shailesh

resolved

Error in Personnel Change Request of MSS

Hi SDN
I have configured ESS and MSS business packages. Everything works fine but when i navigate to Manager Self-Service--> Service Map and click on Create New Personnel Change Request link then a list of employees are displayed and when i select an employee and click on "select form" button then it displays 11 PCR's and when i select any of the PCR's and click on "Edit form" button then the following error is displayed:
java.lang.ClassNotFoundException: com.sap.pcui_gp.isr.isrprocessevent.model.Qisrsui_Attribute_Param Found in negative cache -
Loader Info -
ClassLoader name: [sap.com/pcui_gpisr] Parent loader name: [Frame ClassLoader] References: common:service:http;service:servlet_jsp service:ejb common:service:iiop;service:naming;service:p4;service:ts service:jmsconnector library:jsse library:servlet common:library:IAIKSecurity;library:activation;library:mail;library:tcsecssl library:ejb20 library:j2eeca library:jms library:opensql common:library:com.sap.security.api.sda;library:com.sap.security.core.sda;library:security.class;library:webservices_lib;service:adminadapter;service:basicadmin;service:com.sap.security.core.ume.service;service:configuration;service:connector;service:dbpool;service:deploy;service:jmx;service:jmx_notification;service:keystore;service:security;service:userstore interface:resourcecontext_api interface:webservices interface:ejbserialization sap.com/pcui_gpxssutils sap.com/tcwddispwda sap.com/pcui_gpxssfpm sap.com/tcwdcorecomp sap.com/pcui_gpoadp service:webdynpro service:sld service:tcsecdestinationsservice library:tcddicddicservices library:com.sap.aii.proxy.framework library:tcgraphicsigs library:com.sap.mw.jco library:com.sap.lcr.api.cimclient library:sapxmltoolkit library:com.sap.aii.util.rb library:com.sap.util.monitor.jarm library:tcddicddicruntime library:com.sap.aii.util.xml library:tccolapi library:com.sap.aii.util.misc library:tccmi library:tccolruntime interface:tcsecdestinationsinterface Resources: I:\usr\sap\OH1\DVEBMGS30\j2ee\cluster\server0\apps\sap.com\pcui_gpisr\webdynpro\public\lib\app.jar Loading model: {parent,references,local} -
I have configured ADS. Can any one suggest me how resolve the the above error.
Regards
Basha

have you installed proper version of ESS/MSS as per the existing WAS?

MSS-mySAP ERP2004-Error in Personal Change Request

HI,
I am trying to configure the business package for MSS for my SAP ERP 2004.
I have deployed the business package,the web dynpro development components for ess, mss and pcui_gp.
I have done the JCO destination settings, done the system settings in EP.Have done the back end configurations as given in help.sap.com(assigned the employee to user,assigned authorizations).
I have configured the adobe document services for the scenario for interactive forms.
When i login into MSS using the userid,the frontend is dispalyed.
When i navigate to Personal change request,and click on link "New Personal Change Request", i get the error:
failed to create or init instance of model 'com.sap.pcui_gp.isr.isrprocessevent.model.IsrModel' in scope APPLICATION_SCOPE with instanceId 'null'
And:
no jcoMetadata found for RFC function 'ISR_COMPLETE_NOTIFICATION'! Please verify, that your model is consistent with the ABAP backend:
I have provided the details for Server on which web dynpro application is deployed,in the ECC server in SPRO under
Cross-Application Components ® Internet/Intranet Services ® Internal Service Request ® Scenario Definition ® Define Scenarios ® Details ® Additional Data for Scenario.
When i test the form from there i get the same eror.
Please help.
Thanks,
Regards,
Malika

Hi Malika
coz of missing function module ISR_COMPLETE_NOTIFICATION
in R3 ECC 5.0
apply sap note 800288.
it's works.
the note--
Please note that you have to create the function module ISR_COMPLETE_NOTIFICATION in function group FISR2 - you should use transaction SE37 for this.
As importing parameter specify I_NOTIFNUMBER type QMNUM.
As exporting parameter specify E_USERSTATUS type CO_ASTTX as well as E_SYSTEMSTATUS type QMSTTXT.
As table specify RETURN structure BAPIRET2.
FUNCTION ISR_COMPLETE_NOTIFICATION .
""Lokale Schnittstelle:
*" IMPORTING
*"     VALUE(I_NOTIFNUMBER) TYPE QMNUM
*" EXPORTING
*"     VALUE(E_USERSTATUS) TYPE CO_ASTTX
*"     VALUE(E_SYSTEMSTATUS) TYPE QMSTTXT
*" TABLES
*"      RETURN STRUCTURE BAPIRET2
DATA: c_bustrans_complete TYPE j_vorgang VALUE 'PMM4'.
CALL FUNCTION 'IQS4_CHANGE_STAT_NOTIFICATION'
    EXPORTING
      i_qmnum = i_notifnumber
      i_vrgng = c_bustrans_complete
      i_commit = 'X'
    IMPORTING
      e_sttxt = e_systemstatus
      e_astxt = e_userstatus
    TABLES
      return   = return
     EXCEPTIONS
      OTHERS          = 0.
ENDFUNCTION.
regards,
kaushal

I cannot update 2 changes to portfolio, get error bad request error 400

I hit edit portfolio and I made a change to the number of share and to cost price per share. I hit enter and get message Bad Request Error 400

Can you make the changes while you are in Private Browsing mode?
In Private Browsing mode any cookies that you have from regular are not accessible.
*https://support.mozilla.org/kb/Private+Browsing
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Error "Choose a change request with target system..."

Hi experts,
I am trying to change an infosource and keep getting this error "Choose a change request with target system BWQ"
How do I correct this?
Thanks!

Hi,
Check out source system Id's are properly assigned or not.
go to tools ( CtrlShiftF11)
assign point if it helps
Regards,
sandeep

Error when activating change request management

Hello,
When I activate the flag: "activate change request management" in the tab Change requests in transaction SOLAR_PROJECT_ADMIN, the following error message appears:
Warning: Problems occurred during synchronization
of the system landscape
Any idea?
The solution manager release is SAP EHP 1 for SAP Solution Manager 7.0
Thanks and best regards,
Ana

Hi Ana,
Please go through this forum.
Re: Warning: Problems occurred during synchronization of the system landscape
If this does not solve your issue, please revert back.
Rajeev

Creating a New Task in SOLMAN Change request Management

Dear all,
We are using SOLMAN 4.0 and scm functionality.In the change request screen we have a create follow up task(+ icon on top left).What is the use of this task,can we asign a task to some particular person?for example can i assign task to tester?If the task has not completed the task,while closing the correction will it give error?
Please give your suggestions.
Thanks in advance,
Avinash.

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Help me configure Change request management !!!

Dear friends,
I am Going to Configure Change request Management, so just to ensure that the configuration is not erronous, i would need Expert advise..
Just want to know Clear few things before i proceed..
I am also refering SPRO and related notes
Scenario :
I have two SYSTEMS SAP ECC 6.0 with System id R03 and Soluiton manager with SYSTEM id SOL,
R03 has 3 clients, 300 600 700..
In R03 300 is the development client, 600 is quality client, 700 is the production client.
SOL has 2 clients, 100, 200
With 200 as the production client.
Q.1) Do i have to configure CHARM in both the client (100 and 200 of SOLMAN).
Q.2) Initially I had tried to set CHARM in client 100 of solman, but later on realized that it has to be set up in client 200.
When i logon to client 200 and Execute IMG activity Spro-> sap soltion manger->basic settings-> sap solution manager system->activate integration with change request management.
Then by default it take the previous client ( client 100) as the change request management client.
( as we know there are three steps in the above activity ), the other activity are executed properly, only prblem being that the default client is always set to 100, which should not be the case).
I do get the prompt saying ( "The change request clent is set to clent 100, do u want to change to client 200, on clicking yes, still it is always set the same client 100 as charm client ")
Plz let me know what do i do to set the change request client to 200??
Q.3) Regarding TMS, we have local domain controller in solman and local domain in R3.
We are planing to establish domain links between the two systems( ie both the domain controllers) ??
Is this the right strategy ??
Any other method that u can recommend ??
Q.4)One of the IMG activity says, Generate Destinations to client 000 of all the domain controllers..
Whenever i do this these, destinations are created with errors, i am not able to create trusted RFC destinations without errors.
When i logon to satellite domain controler and excecute sm59 there are 2 destinations created Trusted and BACK.
These destinations works well,
but when i logon to Solman, got to sm59 , when i test the TMW and TRUSTED rfc destinations i test these destinations using Remote Logon i get error,
" no authorization to logon as trusted system"
I went thru one note which recomended Kernel upgrades to solve the problem,
I r3 my kernel relaese is 700 with patch level 56, the note recomends to apply patch 80, did u have these problems??
what is your kernel patch levels in sateliite and solman systems.
Q.5) TO be able to raise tickets from R3 to solman we create RFC destinations.
We also create RFC destinations to client 000 of all the sateliite system,
dont u think these RFC destinations might interfere with each other??
Q.6) Is there anyone who has successfully configured CHARM. Can you plz share the configuration documents with me..
Please note :
All the contributors would be handesomely rewarded with points .

Hi,
Check this
Note 128447 - Trusted/Trusting Systems
For your Q4.
Q3.)
Establishing Domain link - That's the right way. Go ahead.
These are the steps.
1.Define Transport Routes for System Landscape
assign exactly one development system to a production system, and that these two systems are connected by exactly one unique transport track. If a development system and a production system are connected by more than one transport track, this may lead to inconsistencies within the transport distribution. This type of transport configuration cannot be supported by Change Request Management, and may cause inconsistencies within the tools involved.
2. Activate Extended Transport Control
The CTC parameter should be '1'
3.Configure Transport Strategy
Deactivate the QA Approval.
4. Activate Trusted Services.
5.Activate Domain Links.
You have to activate domain link between systems.
6. Generate RFC Destinations to Client 000
Hope this helps.
feel free to revert back.
--Ragu

Solman Change Request Management Issue - about create task list

Dears,
We are now using Solman ChangeRM. I have created a maintainance project and maintained its logical component and IMG project. when I want to create a task list for this project, a message"The project is not released. Hence cycle can not be created" poped. The message no. is /TMWFLOW/CONFIG_UI017. Where can I release the project?
Thanks
Roger

Hi,
Pls click the check button(next to activate button)
see the SLG1 log generated remove the errors shown in red.
One it is done u press the refresh button & thn u cn create the task list
chk
https://websmp202.sap-ag.de/~sapdownload/011000358700000657692007E/ECTS_CHARM_SP12.PDF
/people/dolores.correa/blog/2008/07/26/first-steps-to-work-with-change-request-management-scenario
http://help.sap.com/saphelp_sm32/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/content.htm
Regards
Prakhar

Change Request Errors

Similar Messages

Maybe you are looking for