Change Request - Standard Request

Hi All,
I was just exploring the options available for Change Requests and came accress the Set Standard Request and Reset Standard Request.
Even though I tried it out, I was not able to understand the use and functionality of the same. Can anyone explain as what this option does?
Regards,
Madhur

http://help.sap.com/saphelp_erp2004/helpdata/en/b6/b40613a44411d1846d0000e8a57770/frameset.htm
once u set a request as a standard request, the request selection dialog does not appear when u save ur objects...
the reset option just undoes this setting...
rgds,
PJ

Similar Messages

Change request message standards

Hi Experts,
what is the change request message standards? Is there any message standards. Pls send me the full details.
Thanks in Advance,
Saradhi

Hi,
If you are taking about change request description and the documentation that is done in SAP for transports then it's totally internal to a client and how they keep it.
You can maintain anything which is being followed or which is followed by your client.
If it's not related to this, then I am unsure about the exact issue
regards
Nishant

MDG standard Supplier Change Request

Hi ,
I am trying to use the out of box MDG Supplier flow.The status of the task is now "Final Check Approved",but I cannot find the Vendor in LFA1 table.The last step is a background step "Distribute Change Request" which has finished successfully.My question is do I have to always configure a replication model to get the data from staging area to Active area?
I am not sure why if the workflow has completed(ie approved) ,I am unable to see the Vendor in LFAI.I am looking in the same client where MDG hub is deployed.
Regards,
Premjit

Hi,
As I understand,the data is maintained in a staging area untill approved.Once approved,the data is pushed to the active tables(like LFA1 table).If my understanding is correct,then i should have seen the Vendor in LFA1 which I have not.The reuse area for my model BP is marked as PARTNER which is default.
Any leads what can be the possible reasons that I dont see the data in LFA1 on ECC where I have deployed the MDG.As mentioned earlier ,we have not set up any "repliacation model" yet.
Regards,
Premjit

Questions about authorizations of tables/change requests/badis/locks/lang

Hi ,
Few questions I have not been able to find out .
1) HOw can we ensure that every time we do any change in a table including adding/changing content a change request is generated .Basically to ensure any changes being done are being stored in a change request .
2)How to give authorizations to/for a database table ?
3)can/how we add water marks in scripts and smartforms ?
4) Can we create and place our own BADIs in SAP standard code?
5)different LOCK types/categories with clear difference (not the standard SAP help please..)
6) tips on handling two table controls on one screen.
7) WHat are the things required if we want to use objects(scripts,texts,smartforms) in different languages ?
8)multilingual scripts ?
9) how to have a search help in module pool without using Process on value request ?
Moderator message - Please - one question per thread and please ask a specific question - post locked
Edited by: Rob Burbank on Dec 3, 2009 4:29 PM

FSKB G/L Account Posting
this transaction is not working

Creation of Change request with reference to existing change request

Hi
I want to do Creation of Change request with reference to existing change request for MDG-F and MDG c/MDG S Is it possible? If yes, How?

Hi Sanjay,
No , its not out of box functionality in MDG. Reason being, MDG framework provided some standard API's with the help of which we can do our development with ease.
Like Governance API                            : IF_USMD_GOV_API
       Convenience Governance API         :IF_USMD_CONV_SOM_GOV_API
       Change Request API Interface:       IF_USMD_CREQUEST_API
With the help of which you can play around with your data in MDG with the pre-defined methods of it.
Best Regards,
Kaustubh

Personnel change request

Dear All,
Presently we are in EHP3 is it possible to work in personnel change request in ESS/MSS
Thanks and Regards,
Revathi.

PCR are still available though SAP recommend to use HR forms for newer releases.
From SPRO node help text
Recommendation: Implement Processes to Change Employee Data
Until now, in the portal, a manager used Personnel Change Requests to initiate processes for changing employee data.
Now the new service and form application HR Administrative Services is available for such processes. This application is more flexible and allows you to convert much more complex processes more quickly.
In mySAP ERP 2005, HR Administrative Services and Personnel Change Requests are available in parallel and are supported. In future releases, the standard delivery will concentrate on HR Administrative Services. Personnel Change Requests are available in mySAP ERP 2005 for the last time in the standard delivery.
As the HR Administrative Services are already available with mySAP ERP 2005, we highly recommend that in mySAP ERP 2005 you implement processses for changing employee data using HR Administrative Services.
Hope this helps.
Cheers,
Sudhir

Custom Change Request Selection for Customer/Supplier Update

Hi experts,
Anyone knows how is possible to display the change request selector popup when starting a Customer/Supplier/BP update?
For MDG-C and S I only have this popup when is related to creation process. When is a update the standard change request is considered for the process.
Screen on creating a customer
What I need is the same screen when starting an update process, because I will need to specify a Z change request type. Anyone knows if this can be made with some configuration?
Kind Regards,
Fabiano Moraes

Hello Fabiano,
You will get this pop-up only if you have more than one CR type linked to the corresponding business activity. If you only have one CR type, then that CR type opens up by default.

ChaRM: approving of a change request by various list of end users

Dear, experts.
Can I customize ChaRM so, that before initiating change request a support message should be approved by by various list of end users depending on component (component A - list 1, component B - list 2)?
For example some end-user wants to change established business-process. In this process are involved other end-users, so to trigger changes he have to ensure that other end-users are agree.
can you suggest any profitable solution?
thanks in advance

Hey talgat,
what you need is an action that uses pfac (it s a transaction for defining rooting rules). Thanks to this transaction you can define rules that will be based on different fields of ticket od crmd_order to assign the right person to the ticket
There is a standard action that does those kind of things called SLFN0001_ADVANCED_FIND_PARTNER of action profile SLFN0001_ADVANCED available in transaction sppfcadm. You ll notice that this action uses rule id AC13200137. Well you ll need to define your action that will be alike with your own rule that you ll have predefined in transaction pfac.
Use a copy of the standard rule AC13200137 to do your own; it will ease the task for you.
PS: this link could maybe help your understanding
Support Team Determination
Hope this helps
Regards
Khalil

Change Request Management: virtual systems

Hi!
We would like to set up Change Request Management (ChaRM) approach for 3 +1 systems:
DEV --> VT1 (virtual system) --> QAS --> PRD
Questions:
1) Are there some restrictions implementing ChaRM with virtual systems?
2) We would like to use in parallel non-ChaRM transports and we have there
an automatic transport twice a day.
Will this approach be a problem for the ChaRM?
3) Which transport routes will be used by ChaRM?
a) one for transportof the SAP objects (e.g. "SAP") and one standard transport route (e.g. Z<SID>) or
b) do I have the possibility to choose the transport routes?
Any helpful information will be very appreciated and awarded by points.
H. Thomasson

I am very sorry for the mess I did trying to post my message. I was not able to post it.
Can you please give me any solutions to the problem reported?
Thanks
Antonello

How to deactivate Change Request Management workflows task

We are in a situation where we are switching external SAP service
organisation and we cannot at this stage introduce any new procedures
regarding sceduling-tasklists/TMS/etc. Our ChaRM implementation project
must be set back in to a possision where we can maintain our normal
system maintainance processes without using a fully implementated
CharRM functionallity. The implementation of CharRM has to be realized
in 2 steps:
a) activate only ChaRM documentation system/flow as an extention of
servicedesk, implement this in our organisation
b) activate fully ChaRM functionality with interaction with
SLD/TMS/tasklists/etc after we have switched service organisation
Needs:
1) How to deactivate ChaRM IMG setting SAP Solution Manager-
>Configuration->Scenario-Spesific Settings->Change Management->Change
Request Management->Standard Configuration->General Activities-
>Activate Integration with Change Request Management and related
settings.
We had in an earlier stage the total service process/documentationflow
up and running and with possibilities to interact/respond on
servicemessages for these roles: User, Servicedesk, Change Manager,
Change Advisory board, Developer, Tester, IT Operator equal to ChaRM
process.
2) Ensure availability to use ChaRM as a extention to servicedesk
regarding administration and documentation of SAP changements.

Hi,
Find the guides : on help.sap.com
Change Management:
http://help.sap.com/saphelp_sm40/helpdata/en/0c/5b2160f6fa4b83a3674a210b1cdeb0/frameset.htm
Service Desk:
http://help.sap.com/saphelp_sm40/helpdata/en/45/51fbdbd4941803e10000000a1553f7/frameset.htm
Regards,
Siddhesh

Change Request Management without Transport Managment System

Hello,
we would like to use the Change Request Management but without using the Transport Managment System (TMS). Means, we do not want that transport request are created automatically, we do not want that it is possible to log on to the satellite systems via the Solution Manager and we do not want to integrate the transport track into the Solution Manager.
What effort do we have to estimate for such a change? Does anybody already use a process like this? We would be grateful for any idea or solution.
Many thanks in advance.
Jenny

Hi Jenny,
you can do this with the following activities in your custom Business Transaction (BT):
- remove un-useful actions from your action list (TA: CRMC_ACTION_CONF)
- remove the action from the actions depending on user status (TA: starting from SPRO)
- unlock the switches from your SMI Project CTS Switches (TA: SOLAR_PROJECT_ADMIN)
The effort, for copying a standard BT and remove the actions and testing it, is about 5 days, if you already know how to customize a ChaRM BT... last but not least if one of the standard flows is what you really need.
Please let me know if you need more details, otherwise please reward the forum points
Regards ,
Giampaolo

MSS menu Personnel Change Request

Hi all,
I have the MSS portal role assigned to me. Problem is my MSS menu <i><b>only</b></i> includes Overview and Reports, but need it to also include Attendance, Employee Review, Personnel Change Request, etc. How to I add those menu items under MSS? (mainly concerned about Personnel Change Request at this point).
I've seen a screen shot of another system, and insted of MSS it shows "My Staff", then has the Overview | ... PCR. My Staff is the same as MSS, correct? I just need to know how to get PCR to appear under my MSS menu.
Thanks!

Hi
PCR should be available on the Standard MSS role.
Please check with your Portal admin, if PCR workset in made available for your user. Also make sure you have the end user permission and the needed access to use this iview. Hope this helps
-Mike

TCode CHARM_CREATE for customized change request ZDCR?

Hi,
Q1. is there a way to configure the ChaRM system for the CHARM_CREATE transaction to target a customized ZDCR transaction type?
Q2. is there a way to copy the CHARM_CREATE transaction code to the customer namespace(Z*) and then alter it to target the customized ZDCR transaction type?
Grateful for any assist from ChaRM gurus on these questions ... I am getting much joy with successes in customizing ChaRM for our requirements. We have copied SDCR & other standard tranactions, status, texts etc. With customized ZDCR transaction type & new precesses, actions, conditions etc. we have got a customer specific process flow with e-mails that we are happy with.   (This is on SolMan 7.0 SP25).
I would like to have the "enjoySAP" type of fast transaction entry screen like CHARM_CREATE.
The CHARM_CREATE transaction brings up a popup which creates a change request that targets the standard SDCR transaction type. The fields given for fast entry are those from SDCR (Not my customized ZDCR) and at completion of the CHARM_CREATE transaction entry, the change request is of transaction type SDCR.
At transaction DNO_CUST04, we have tried to edit the parameter with field name "CHANGE_REQUEST" sequence "1" and given new value "ZDCR". The CHARM_CREATE enjoySAP transaction still nevertheless targets the standard SDCR transaction type.
Have phished oceans of blog and rivers of SAP SSM webpages to no avail and I'm still clueless. Will give good points for a hint?
tnx,
Steve A

Hello Mr. Amorsen,
Follow Charm_create step by step using customer name:
1- Create a new transaction using t_code SE93 (E.g.: ZCHARM_CREATE )
2 - Copy the program : CHANGE_REQUEST_CREATE_SOCM to Z using SE38
3 - In SE93, change the program to Z created in step before
4 - In SE80 Copy the function group Change-request_socm to Z
5 - copy the function modules too (will appear a pop-up asking for this)
6 - Change the include ; LZCHANGE_REQUEST_SOCMTOP
     IN LINE 30 : gc_processtype(4) TYPE c
            VALUE 'ZDCR', "process type for change request
     Change value to ZDCR
7 - Activate all
8 - In SE38 report: ZCHANGE_REQUEST_CREATE_SOCM , change the call function SOCM_CHANGE_REQUEST_CREATE to Z
9 - activate.
Done !!!
<<text removed>>
Regards
Claudenir Bispo
Edited by: Matt on Oct 5, 2011 9:39 AM

Program To List Object in Change Request

Hi:
is there a standard program available which will list Object Technical Name and Description in Change Request?
Please let me know.
If you have custom code please send it to me.
Thanks

Hi,
There is no std program, but you can take the query element (assuming you are looking to decipher these elements) from the request and place it in SE16 > V_ELTDIR_TXT.
Hope this helps...

Change Request - Delete / Hide Subject

Dear All,
While creating CR using crmd_order for maintainance project, we have 3 subjects viz,
1. UC(maint)
2. Normal correction(maint)
3. Admin correction(maint)
Now I want to delete / Hide the 2nd one, Normal correction as we are not using this one.
The problem is for testing purpose we have created 4-5 documents using this normal correction & when i tried to delete this in spro >> Scenario-Specific Settings >> Change Request Management >> Extended Configuration >> Change Transaction >> Transaction Types >> Catalogue, Codes and Profile
system is throwing error as *Code 0020 is in use and therefore cannot be deleted
Message no. Q3221*
How can i hide or delete that entry, so that while creating CR, user should not select that option.
regds,
CB

Hi Channabasappa.K ,
You can create a custom transaction type from the standard ones by doing a copy as and then you can make the below mentioned desired configuration.
You will not be able to delete the existing change documents which you have created.
Let me know if you have any queries regarding the above.
Regards,
Sneha Vyas

Change Request - Standard Request

Similar Messages

Maybe you are looking for