Change role name after copying

I copied a role (Business Explorer) and want to rename the role.
Changing the name does not help, because only changes to other languages than the original language are taking effect.
Changing the ID is possible, but there I am not allowed to change the name.
How can I change the name of the role in the original language?

I found the solution. I created the role in language "EN".
I wanted to have the name change in language "DE". Therefore, I had to translate the role name.

Similar Messages

Why capital letters change in lower after copying them from a PDF document, or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

Why capital letters change in lower after copying them from a PDF document (Made by InDesign), or otherwise, why some uppercase are in fact lowercase when I look in the Text Property in any PDF Reader.

your home page to get into your Web site should be index.html (for Mac) or index.htm (on PC)
You can name it something other than index, but will be harder to find. when you create the subjects and link to them, they can can be named anything with the html extension Or if your using PHP end in .php. There is a Microsoft type asp or aspx but your hosting service has to set up using windows server system.
My hosting service use a Linux server normally but can convert Windows for a Fee. UNIX Linux has no concept of asp or aspx.
See this : https://skitch.com/pjonescet/8mnnx/dreamweaver

MAY I CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

Hi,
Do not change the hostname after the installation, if you need to then you have to perform system copy.
Refer: Note 8307 - Changing host name on R/3 host: What do you do?
Regards,
SBK

HOW TO CHANGE HOST NAME AFTER SAP IS INSTALLED?

i have installed ecc6 in my computer.But after installation is completed i want to change my computer(system) name.If i change the computer name is there any problem occur.May i change computer name after installation also.

As far as my understanding goes it can be done. The only problem is SAP is not recommending it. Still if you want to give it a shot please go through the link to learn more and step by step guidance.
[Click Here|http://www.saptechies.com/changing-host-name-on-r3-host-what-do-you-do/]
Also take a look at this SDN thread, you might find something interesting.
[click here for SDN thread|How to change the hostname was set/defined in SAP system?;
Edited by: santra.anirban on Sep 13, 2010 10:45 AM

Changing role names

Hi,
I'm running BW 3.0B- i want to change some of my existing role names - I know it can be done by copying the role and giving the new copied role a new name but i don't want to do it this way.
Regards,
Moshe

You can change the role description but you can't change technical name of the role, technical name is the identifier of the role

Change Computer Name after first TC backup

Has anyone tried changing their Computer Name after the first TC backup. The sparse image created on the TC which contains the backup has the computer name as the first part of its name, presumably any change of computer name would have to automatically change the name of that sparse image. I would like to change the name of my iMac from the default but don't want to do this if I have to do a brand new full Time Machine backup afterwards.

I have changed the computer name (in System Pref: Sharing) of an iMac on our network after the initial backup to TC. There was no problem. This is due to the fact that TC uses the MAC address (also called Ethernet ID) to differentiate machines connected to it.
You can see your machine's MAC address in the advanced area of the Network SysPref under the Ethernet Tab. This number is also in the .sparsebunle idisc image created by TC.
Good luck with the name change.

Changing domain name after 12i installation

Hi all,
I misspelled my domain name during the 12i installation on Linux platform. i know it can be done by changing the context files of both application tier and database tier and running autoconfig after that, But i don't know the exact procedure to do it. Metalink note 387859.1 isn't very helpful to me. There are some notes for 11i on metalink but those are not helpful. Can any body tell in few straight forward steps how to change the domain name after 12i installation. Any help appreciated.

I misspelled my domain name during the 12i installation on Linux platform.Was the installation successful? Did the post installation steps complete successfully?
But i don't know the exact procedure to do it- Deregister the current database/application server
- Update the AutoConfig Context files (database and application)
- Shutdown the Applications Services
- Reseed the Net Services Topology Model ***
- Start the Applications Services
Check the following note (Under Net Services Section) for the required steps to deregister a database/applications tiers from the Net Services Topology Data Model:
*** Note: 387859.1 - Using AutoConfig to Manage System Configurations in Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=387859.1

How do I change device name after connecting to old machine?

That's right, I've gone ahead and connected my new power book to my old dual G5 in order to get the information onto the new machine.
Now, my new machine has my Dual G5 name as it's device name.
How can I change this so my power book has the correct name?

I wish that was it, but that only changes the name of the "Hard Drive", not the actual device name.
In other words, when browsing the network there's 2 computers with same name.
Any other suggestions?

Changing photo name after downloading

I downloaded a group of photos to my computer and wanted to rename each photo. When I attempted to do so, I received a message saying "changing file name extension may make file unusable". When I did it, the photo disappeared. Why can I not change the name? I have done so in the past with no problem using a different camera.

Hi Nancy,
Are you trying to Rename the files using Photoshop Album Starter Edition or simply from Windows Explorer. In either case, you should rename only the file name and leave the extension as it is. For example, if your file name is "file1.jpg" you should only change 'file1' and leave ".jpg" as it is. Otherwise, Windows will not be able to recognize the file as a picture file.
~Vibha~

PDF comments change to XML after copying and pasting

Has anyone experienced a problem with comments in mark-ups where they appear as normal text until they have been copied (and pasted into Indesign, though this part is not relevant) but when ticked as completed they change to xml formatted text? See before and after pics below:
Oops, sorry, cannot load images, must be an error with the upload software. Not accepting TIFF/JPEG or PNG.

As a follow up to this I have just experienced another similar situation where the the pdf comment changes to Greek text...
the left hand pic is from the comment window, the right hand pic is from the mark-up in the text. Very odd...

Changing system name in copied function

Hi Guys, I have copied a bunch of functions, however the system is not allowing me to change the System Name in Actions tab.
Can anyone help?
Thanks

First and foremost: I'd say this is not right - please open a customer message.
I'm guessing what you want to do is have the same TCodes and Objects used in risk analysis for a new system you're adding.
If this is the case, copying the function is not the right approach. You's either do that by adding the TCodes for the new system to the existing function, or - MUCH better - use a logical system and just add the new system there.
Copying a function may be useful for building organizational risks, i.e. risks&funktions that have a direct link to a certain part in the organization.
Frank.

How to change table name after creating page and application

Hi HTMLDB Team,
i have created a application with page where the region use master detail form with table name emp.Now after developing the page and the application i want to change the table from emp to emp2 where emp2 is the table with same structure of existing emp and same field properties.How can i edit the table as emp2 ?
Thanks in advance,
Cheers,
koushik

Koushik,
Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
If you still want to give it a go:
Assuming that you created the 2-page Master Detail report & form:
On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
Thanks,
- Scott -

Changed contact name after 10.2 upgrade

After I upgraded my Z10 to v10.2.0.424 my contact entry name changed from my name (format: first last name) to my birthday (format: YYYY-MM-DD 00:00:00)?!?! I went to edit my contact entry and I can chenge everyhing but the name. Any ideas on how to fix this?

it appears I didn't have the user's BBM PIN entered. when i entered it into their contact, saved. REOPENED the contact, their first and last name showed up.
Weird but true.

Change cost planning after copying to different CO version

Hi,
I have done network cost planning through project builder, after completing this I copied my cost planning to different CO version. Now I'm not able to change values of second CO version. I can see the figures in reports, but not able to change using CJR2 or CJ40 transactions.
Thanks

Hi,
Full authorization is provided to the user, and the required fiscal year too is configured in second CO version. This is not solved the problem!
If my understanding is correct, only version 0 can have network costing, all others will have either cost element based or WBS element based cost planning.
Now, when a network costing is copied to another CO version, the destination version can't hold cost planning in the form of network costing then what type costing second version would be having and how one can modify the value and quantity in that version?
Thanks

Changing airtunes name after Airport Express name change

I'm running 7.0.1 and an Airport network. Last night I changed my Airport Express name, having moved the express to a different room. When I start iTunes, it still has the old Express name in the list. I can't seem to find a way to have it reset its list. Basically I think iTunes needs to do a new search for Airtunes points to change that list.
Suggestions?

I have the same issue - applicable to iTunes 7.0 and 7.1. I updated both of my airport express units with new names. The airport admin utility sees the new names properly. iTunes however still displays the old name. Airtunes functionality still works - but I'd like the names in iTunes to be displayed properly.
Anyone have ideas on how to solve this?

Change role name after copying

Similar Messages

Maybe you are looking for