Change run failure: Master data still in M version

Hi Experts,
We have an attribute change run that failed. We checked the master data and there are still entries in M version. We have tried to execute change run manually, but the infoobject is not listed. Checking RSRV we have the error "value 1000 for 0MATERIAL is in external and not internal format," and "there are values with the wrong internal format in the SID table."
We are thinking this is a probable reason why change run is failing.

Hi.........
Check the conversion Routine for 0MATERIAL.........What conversion routine u hav used.........We r using ALPHA.......this is the standard one........hav u changed it.......
Check this...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/7108a690-0201-0010-4cbc-9bca94f9ad9c
Also u can check the Log of the Change run..............Go to RSA1 >> In the top TOOLS tab >> Apply Hierarchy/Attribute Change >> Select the Attribute Change run and click on LOG....
Regards,
Debjani....

Similar Messages

  • Attribute Change Run VS Master data activation

    hello guys
    I just want to know whats the difference between 'Attribute Change Run' and Master data Activation...For me,both seem to serve same purpose.......in which scenarios do we use them?
    Thanks and Regards
    S

    Hi S,
        Although they seem to be the same there are differences.
    Master Data activation.: When you load master data, they are loaded as D or M versions. Check the table as /BI0/P<infoobject tech name> , you will see different versions, if you have not activated your master data yet.
    Note : If you are checking for SAP standard objects, drop the 0 eg table for 0MATERIAL would be /BI0/PMATERIAL.
    When you activate master data, all D and M versions of records get transferred into A or active versions. So after activation, you should not find anything other than A versions.
    ACR: The use of an ACR is two fold. 1st use is that it performs the same action as a master data activation automatically.
    The 2nd function, is that it realligns the aggregates for the changed attributes
    let me give you an example.
    You have an aggregate based on material group which is an aggregate of material.
    Consider that you have a material X which initial belonged to group A.
    The aggregate would look like this
    Material Material Group Keyfigure
    X                  A                      100
    Now you change the material group of the same material as B
    The aggregate would not change automatically....ie it would still be X A 100
    To realign the aggregate,you use an ACR. After running an ACR, the aggregate would look like
    X B 100
    Hope this helps.
    Regards.

  • Aggregates with Attribute Change Run and Master data

    Hi !
    I created Aggregate which includes Master Data such as Customer , Customer Number , Material , Material Number.....
    It also contains navigational attribute and hierarchy...
    Now we all know that if Master data and Hierarchy changes frequently(or some new values are added or new attributes are added etc.) we want to see the respective change in Aggregates too
    So just Rolling up aggregate will not help.
    We need to apply Attribute Change run for this purpose, to aggregates..
    Now the question is HOW TO  APPLY ATTRIBUTE CHANGE RUN to aggregates?
    How to automate this process with Process chains..?
    If i create Aggregate on Master Data CUSTOMER NO., DOES IT AUTOMATICALLY INCLUDE THAT AGGREGATE IN ATTRIBUTE CHANGE RUN FOR THAT CUSTOMER NO. PROCESS CHAINS ?   Yes or No..........
    (What i mean to say is if there is Attribute Change Run for Customer No. and if this is in Process chains specially created for Customer Number , than as aggregates are created on  Customer No., does i t automatically applies and make changes to Aggregate too, or do we hvae to create special process chian for it ?)
    Please reply asap ? its urgent

    hi,
    check these links for attribute change run
    What's the attribute change run? and the common sequence of a process chain
    http://help.sap.com/saphelp_bw30b/helpdata/en/80/1a67ece07211d2acb80000e829fbfe/content.htm
    regards
    harikrishna N

  • Attribute change run on master data.

    hi all,
    i have meta chain in that 1 local chain got failed in Load data step tell me every possiblity to load data
    1)repeat Process :- why ? what is basic criteria for same
    2)manual data load :- how ?
    and most important how to run ACR in that cube (diff ways)
    Please provide step by step process for same..

    1)If a load fails in loading due to exceptions or a conection, we can repeat the step.
       Before repeating, we need to delete the previous request in red status.
       If it fails in activation, we can resolve the error and then repeat the step.
    Basically what we need to check is that there is no data to be in red status and also every step needs to be run in the process chain in the same sequence.
    2)Some times we need to do a manual load. I will explain one scenario.
    data load fails in activation due to data error.
    now as the data already loaded in DSO cannno be activated,we delete the data from DSO,edit the data in source and Run the DTP manually(as the status of dtp is already in grren in process chain,we cannot repeat). Oncce the data is loaded, we can repeat the activation error.
    Thanks and Regards,
    Srinath.

  • Send changes of Artical master data from sap to nonsap (idoc outbound prog)

    Hi Experts,
    I am  new to interfaces
    I have one requirement in Idocs, i.e the changes of artical master data is send to sap to nonsap system through idoc.
    idoc type is ARTMAS05, msg typ is ARTMAS.
    I am giving some information for my object.
    For article (MATNR) by site (WERKS plant)
         If MRP Type (MARC-DISMM) = u201CX0u201D
              Then if changes to fields:
              MARC-KZAUS     Discontinuation ind.
              MARC-AUSDT     Effective date out
              MARC-NFMAT     Follow-up article
    Then send idoc type ARTMAS05 with the following data
    segment E1BPE1MATHEAD
         MATERIAL
    segment E1BPE1MARCRT
    MATERIAL             PLANT                     DISCONTINU            
    EFF_O_DAY            FOLLOW_UP
    Systems Referred to:
    The planning system for our client is nonsap system. This software requires to be informed of relevant changes on articles in order to start its planning runs. When an article is superseded by another we have to send the replacement article (if any) as well as the discontinuation date.
    Dependencies/Prerequisites :
         Change pointers for Article master active
         Change pointers active for fields:
         MARC-KZAUS      Discontinuation indicator
         MARC-AUSDT     Effective date out
         MARC-NFMAT     Follow-up article
      Idoc ARTMAS05 required with reduction in order to only send relevant fields
    Filter to only send idocs for materials in the u201CAutomotiveu201D type where MARC-DISMM = u201CX0u201D.
    So this is my requirement, please send some sample code or idea how to complete object.
    with regards,
    gs reddy.

    Hi,
    All the details mentioned seems to be correct.
    just change one "automotive" material and check change documents are getting generated.
    i hope partner profiles are already in place.
    once change docuements are inpalce check RBDMIDOC program is scheduled in back ground or you can manually execute the program for testing.
    and check the IDoc generated.
    do you  want supress some segements?
    di your NOn-sap ssytem can accept Idoc?
    Suresh

  • To track changes to the master data

    Is there a report or program to run to see, who made changes to the master data, deleted a record or so?
    Please help.

    Hi ,
    Use the report RPUAUD00(Logged changes in infotype data). This report is  to display all documents that were created with the creation of infotype log (short: Change documents). any changes, creation/deletion.
    to ensure that changes to infotype fields are entered (changes, creations, deletions), these fields must be maintained in the following views: HR Documents: Infotypes with Documents (V_T585A), HR Documents: Field Group Definition (V_T585B), and HR Documents: Field Group Characteristics (V_T585C).
    Hope this hellp you.

  • Changes of asset master data - S_ALR_87012037

    Hi Colleagues,
    Could please help me by settings in order to see changes of asset master data ?
    I would like to know in which assets changes have been performed, in which characteristic and to know old and new value.
    There is one transaction : S_ALR_87012037 - but i cannot get horizontal look of values. I can only get vertical.
    In instruction there is shown that i should click function _ "use alv tree control" but i cannot see in my SAP version.
    is there any another option to get request display of data ?
    Thanks a lot for your response

    HI Gora,
    Standard report is the best option, but you can also use Table CDPOS:
    S_ALR_87012037 Output:
    You can also use Table CDPOS/CDHDR, in se16n.
    Regards
    Javed

  • Changes in customer master data

    Hi
    Is there a different way (apart from using IDOCS) to identify changes (create/update/delete)  in customer's master data to the following  Condition Class:
    BPAR
    TESTRF
    DEBI
    KLIM
    Best Regards
    Tal

    Hi
    I want to know if all the changes in customer master data objects: BPAR,TESTRF,DEBI,KLIM
    are recorded in the system and where?
    is it relevant to customization?
    Best Regards
    Tal

  • Mass change of Asset Master data

    Hi!
    Is there any transaction code for mass change of asset master data. I need to change Depreciaiton start date for all assets?
    regs,
    Ramesh

    Use OA02 - Mass change, create a substitution. Add in all prerequisites and save it.
    Go to AR01, execute it for the list of assets to be changed and create a worklist for the same.
    Execute the worklist in AR31 and refresh it till all changes are completed.

  • Mass change of customer master data

    Hi,
    I would like to do a mass change of customer master data.
    I need to remove the international VAT register number for local Polish customers, as we will use the local NIP number for these customers.
    Which transaction code do I need to use?
    Are there any things I should keep in mind?
    Thank you.
    Kind regards,
    Linda

    Hi,
    You haev a Transaction called MASS. Please check whether you have the authorization for the same. If you have then it is very much easy for you to maintain the same. If you dont have the MASS authorization then you have to create a LSMW and then make the change.
    Steps:
    1. Enter MASS
    2. Object type - Select KNA1 (avaialble in the drop down) and execute
    3. You should have an option "Customer master (VAT registration numbers general section) " with table KNAS. Execute
    You will be able to choose those customers whom you want and make the changes.
    Hope this should help you.

  • Attr change run cannot preceed Data Load?

    Hi, all
    I need to make attr change run before loading data, because these active MD should be used in data loading routines. When checking this chain BW shows message " A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_E5NXARYHE6BXRST2FD3YZAN7B in the ch".
    Why? Is that because change run only activated and chain doesnt wait for change run end and starts next process?
    Or I can suppress this warning?

    <b>2 Gopikrishna eriki </b>
    Why? I think it isn't for no particular reason.
    <b>2AHP</b>
    <i>normaly attribute/hierarchy change run is performed after all data loading finished, it should put after the infopackage process.
    </i>
    But here I need to schedule another load after this change run. And I want to use results of this change run in this load.
    BTW, when running this chain I have dump on this infopackage load with OPEN_DATASET_NO_AUTHORITY on lines
      OPEN DATASET L_PFILENAME FOR INPUT IN TEXT MODE   
        ENCODING DEFAULT                                
        IGNORING CONVERSION ERRORS.                     
    When I schedule this package manually everyting is OK.

  • Online Change Transfer for Master Data

    HI,
    whats transaction for Online Change Transfer for Master Data, and how to use it.
    regards
    manish

    Hi Manish ,
    You make the settings for change transfers in transaction *CFC9 (Change Transfer
    for Master Data setting)*
    For material masters, customers and vendors, the change transfer can occur
    periodically or can be executed online immediately. You also have the option of
    deactivating the change transfer.
    You can also configure an immediate change transfer for work centers and
    resources. In this case, the change transfer only concerns the header data of the
    individual work center capacities.
    Hope it will help you.
    regards
    Ritesh

  • Changes in the master data of assets

    Hello Guys,
    Is there some transaction or table in the assets accounting, where are recorded the historical changes in the master data?
    Thanks a lot.
    Best regards,
    Rodrigo Soares

    Hi Rodrigo,
    To add on Bernard's post, after selecting the asset using tcode AS03 and choose Environment tabe in the top of the SAP screen - you will have  two options to choose
    a) on asset
    b) on field
    The first option will entire list of changes happened on the assets and in the second option you can get the list of changes for any particular field in the asset master data.
    Best Regards

  • Regarding Attribute Change Run failure.

    Dear All,
    We have a process chain which contains many meta chains.
    Now in each chain i mean meta chain there are attribute change runs
    We have desegregated the attribute change run. is tere any method to place a check for attribute change run locks because at the last i have another attribute change run which is failing every day because of the attribute change run is still happenign in some chain.
    how do i implement it?
    Thanks in advance
    Janardhan Kumar.

    Hi Janardhan,
    In master data process chain where you have added process of attribute change, just insert a program before this process:
    The program is: RSDDS_CHANGERUN_MONITOR
    This program will check for any another attr change run running at that time and if there's any other attr change run runnning locking the object which your next attr change run requires then this program will not allow your attr change run to run.
    Once all the locks all cleared for attr change run it will trigger the next node.
    This program has a do loop which keeps on checking until unless locks are cleared.
    Regards,
    Vij

  • Attribute Change run failure

    Hi All,
    First time when ACR is run, the job terminated and when I checked in Change run Monitor there were some other change run which has got terminated already under some user.
    In Job log the error was "Error when deleting the data record /BIC/XZInfoobject"
    We also get the message u2018Attributes of characteristic ZXXXX locked by the terminated run XXXXXXXu2019 when we activate master data.
    We tried to re-execute the run in the change run monitor even then it got terminated and the error message was the same as above.
    In order to release the lock we tried in SM12 but could not any locks and found a Function module RSDDS_AGGR_MOD_CLOSE to finish the last change run and we used the same to release the lock which worked fine.
    We then used the program RSDDS_AGGREGATES_MAINTAIN to manually run the ACR giving the Info object name.
    The job also finished successfully but still we find records of version u2018Mu2019 under the Infoobject P table. There are 11 records having M version with Insertion flag u2018Iu2019. These are the modified records after the load, which will be inserted upon activation.
    Please let me know if there are any solutions to activate the modified records to P table because we are not finding the Infoobject in ACR queue even after manually changing master data or running loads.
    Thanks,
    Dinesh

    Anything related to WD here ??
    Please put your question in relevant forum for a speedy response.
    Regards
    Manas Dua

Maybe you are looking for