Change run for Compounding infoobjects

Hi Experts,
I need a solution.My question is that do we have any option like attribute change run for compounded infoobjects.Ex.Componding change run??.
Issue is that.I have Characteristic infoObject ZBOMM i.e for Bill of material.It has attributes and compounded infoobjects.The componded infoobjects are 0plant and 0material.We know these compounded objects acts as an primary key for ZBOMM infoobject.When the changes happen for attributes,because of attribute change run it over writes all attributes of ZBOMM which will be available for reporting.But when it comes to compounding infobjects (0plant and 0 material) it will retain the old data and also reflects the new changed data.this is shows double entry in reports.I want the old data not to be present as it happens for attributes.
Is there any solution for this problem?.
Please let me know.
Thanks and Rgds
ACE

Hi!
Run RSDDS_AGGREGATES_MAINTAIN for 0plant and 0material.
Hope it helps!
Adwin

Similar Messages

Attr changes runs for all Infoobject in a process chain

Hi,
I have a process chain for the master data ( ATTR, TEXT and HIER),I want a Hierarchy/attribute change run like a last process in my chain and actives all the InfoObject and Hierarchy.
How can I carry out the structural changes for all InfoObject in a process chain?
Thanks!

yes but it requests me a variant. then a layout "execute infopackage", then the attr change doesn´t have Object.
I don´t know what I do?
This process actives all my ATTR and HIER in my chain???
Message was edited by: Victoria León

Attribute Change Run- For Custom InfoObject

We have custom IO ZGN_PROD. For past few days attribute change run is not happening to this IO even though there are thousands of M version entries in P table. We have tried to use Report RSDDS_AGGREGATES_MAINTAIN for attribute change run but then also it is not going through. When we debug this report we found out that there is SQL statement in Report RSDDS_AGGREGATES_MAINTAIN which is not getting executed successfully.
SQL Statement is
UPDATE (<l_sx_itab>-name)
    SET objvers = rs_c_ojbvers-active
         changed = rs_c_changed-nothing
    where objvers = rs_c_objvers-modified
      AND changed = rs_c_changed-insert.
After execution of this SQL Sy-subrc is 4 instead of 0.
What could be the reason.
Can you please help me resolve this issue?
Thanks and Regards,
Samir

Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for <i>info object</i> 0pm_order or apply attribute change run for 0pm_order in <i>info providers</i> because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Double change runs for same variant

Hi,
Can anyone help me regarding this .We are facing duplicate change runs for the same variant.This is very important for us
Regard
Srini

Hi Subhash,
Check the print parametes of the job, can be seen under steps --> double click on program --> print properties. There we have option to select new spool number.
So every time the job runs it will have a new spool number. Hope this helps.
Regards
Sushant

Attr change run for huge PC!

Hi,
I have 30 infopackages which i had included in a new process chain and for all infoobjects i had created only one attr chnage run by including all the relevant info objects in the variant of aatr change run!
there are actauuly some parellel processes as well in the end of PC!
So how should i connect the attr change run process to the PC!
just connecting to any of the IP s is OK? or i need to connect every IP to the attr change run which are ending the chain?
Raj

You can design your PC.
If you are running change run after every load then you may run into change run locking issues...
You can do onething load all attributes .. run the change once then...
Load all hiers.. then run change run once...
then load text...

Attr Change Run Master Data Infoobject PChain

In the master data process chain process type Attribute Change Run which is usually at the end of the chain updates the changes in the master data infoobjects.
The Chain is usually designed with full infopacks and say if it is scheduled every night , isn't it loading the master data again ( duplicating ) and again even though considering the process type Attribute Change Run at the end.
Is it like just the attribute change run is executed for updates ?If thats the case why do we need a process chain for Masterdata...if its only one time full ..that can be done manually right?
Am I missing something here ...?

If you look at the detail in the Monitor for a Master Data load, it will tell you how many recordssent from R/3 and how many records were updated and inserted.
As far as static master data that deos not regularly have new records or changes - you're right you don't need to load those objects daily, they could be loaded perhaps monthly.
You might consider balancing how fancy you try to get with breaking up master data into different groups, loading some daily, and other sweekly, others monthly, etc. In our case we use to have a fairly elaborate master data load schedule, loading someobjects 1st Tuesday of the month, others 2nd, Tues, others 3rd etc, and then we had weekly loads and dailys. When I began to review the run times involved, it was apparent that the various monthly loads, in total, ran less than 10 minutes, so I just consolidated the 4 differently monthly maser data loads and the weekly loads all into a single process chain. While much of the this master data doesn't change much, it was much easier to just schdule mastr data either daily or weekly, rather than getting too elaborate.
Now if run time of master data loads or change runs sarts to become an issue, then you might have to adopt a more elaborate schedule. It really depends on your environment.

Error in Change Run for 0cust_sales

Hello Experts
In master data load process chain for 0cust_sales it fails at change run step.
with ABAP error short text "Exception condition "TREX_ACCESS_ERROR" raised."
and error analysis
" A RAISE statement in the program "CL_RSDDTREX_TABLSERVICE=======CP" raised the
exception
condition "TREX_ACCESS_ERROR".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls."
Please help me understand and resolv issue here
Thanks in advance.
Regards
Sudeep

Hi,
This seems to be related to BIA.
Please check the below thread & link.
[Attribute Change run was terminated;
[http://help.sap.com/saphelp_nw2004s/helpdata/en/6b/cda64246c6c96ae10000000a155106/content.htm]
Regards
Vishal

Attribute Change Run for Hierarchy

Dear experts:
we are trying to create a process chain for a hierarchy. When we included "Execute InfoPackage" into process chain, it automatically dragged other 2 steps into process chain as well, which are "Save Hierarchy" and "Attribute Change Run".
My Question is when we looked into "Attribute Change Run", the obj type is "Execute InfoPackage" instead of "Hierarchy". Shouldn't we choose hierarchy as object type when operating Attr change run??
Besides, I checked SAP document. It is said the "Attr Change Run" is only necessary when the hierarchy occurs in aggregates. Can anyone please explain to me what that means.
Thank you very much
Regards
SzuFen

Haven't really looked at the object types in the process chain (we're still using event chains here for the most part), but I would be inclined to leave it as, and only change it if you have a problem.
The process chain tool drags steps into the chain by default, e.g drop and build index, attr change run. That doesn't mean you have to keep them in the chain. If you do not have hierarchies in your aggregates, you could remove the step. Now of course, the burden falls on you to remember to add it if you ever create an aggregate with a hierarchy in it.
Of course the next would be, if most of your queries use a hierarchy, you would probably want the hierarchy in the aggregate, otherwise the aggregate isn't going to be used.

Attribute change run for Customer

Hi All,
I did a delta load of the customer data and got some new and changed records. I remember that we need to do an attribute change run after loading any master data. To do that, I went through the menu path Tools Apply hierarchy/Attribute change run...but couldn't find anything there. Do I need to do anything to get the "Customer" here to do the attribute change run.
Thanks,
RPK.

Hi
Go to
Tools-->Apply hierarchy/Attribute change run
Oncle ur there click execute to start change run,It will staart and finishes the Attribute change run.
If u want to see the list of objects click on the 'InfoObjectlist' on the Tools-->Apply hierarchy/Attribute change run screen
Assig point if it is helpful

Update SQL in Field Change Running for a Long time and PIA signs out

Hi OTN
I have put the following Update SQL in one of the Component Record FieldChange Event
MessageBox(0, "", 0, 0, "Fieldchange triggered rnid=" | PS_AESQL_RN_TBL.RUN_CNTL_ID | "op=" | PS_AESQL_RN_TBL.OPRID | "sqlid=" | PS_AESQL_RN_TBL.SQLID);
SQLExec("UPDATE PSSQLTEXTDEFN SQ SET SQ.SQLTEXT =
(SELECT TXT.SQLTEXT FROM PS_CUSTOM_TBL TXT WHERE TXT.SQLID = :1") WHERE SQ.SQLID = :2;
:1 = sqlid from custom table which has custom SQLIDS and custom SQLS provided
:2 = "PS_DYN_AE MAIN Step01 S"
SQLid OF an sql action in an AE.
The update works fine in the backend when executed separately
Though the sql updates only one row it takes a long time when FieldChange is triggered and the PIA logs out ..
PS:The values required for the SQLExec that is :1 and :2 are fetched correctly when the FieldChange is Triggered.
I have verified this using the MessageBox which Popped up the parameters before the SQLExec was triggered.
Any idea or solution why such error occurs would be really helpful
Thanks
Niranjan

Answer to that would be No.
PeopleCode does not allow and is not intended to manipulate PeopleSoft Tools data.
I have to ask you, why you want to do this exercise?
You should avoid as much as possible to use SQL in PeopleCode, because
- this is not checked by the PeopleCode compiler for correctness
- can be a performance killer
- possible data integrity issues due to not inserting/updating all relevents tables
- any errors are not to be caught by the application and sql error are presented to the user
So, do not use SQL unless all other options fail to do the job and definitely do not alter data in PeopleTools tables!
This could make the entire application crash and the only solution would be to restore your database, with all data transactions lost untill the restore point.
You should rather look at using metasql and dynamic sql building within the application engine.
See PeopleBooks on this subject.
Enterprise PeopleTools 8.51 PeopleBook: Application Engine > Using Meta-SQL and PeopleCode > Including Dynamic SQL

BIA Master Data Index Not Updated After Change Run

In BIA it shows master data 0VERSION table /BI0/SVERSION has 360 records which matches with the number of entries in SE16 /BI0/SVERSION. One record was added to 0VERSION so now SE16 /BI0/SVERSION shows 361 records. I did a change run for this infoobject 0VERSION but the BIA index for /BI0/SVERSION still only show 360 records. I expect it to show 361 records after the change run. Is this a bug? Thanks.

Hi Thao,
I see one of 3 possible scenarios:
1) You load 0VERSION as a part of master data load (from flat file or another system). You see your 11th record in version "M" after load and then you run change run that makes "A" version of the record. ---> BIA index should be automatically updated. If not - open OSS message to SAP.
2) You load transactional data in an InfoCube, and it has new value for characteristic 0VERSION. ---> In this case you need to run roll-up of this new load request in the InfoCube to let BIA index be in-sync.
3) You are modifying 0VERSION manually (e.g. SQL INSERT statement), so system is not aware of new record at all. ---> You need to run the mentioned single-table-index program to update BIA index.
Is it any of these 3 scenarios, or you have the 4th one?
Regards,
-Vitaliy
Edited by: Vitaliy on Aug 19, 2008 1:59 PM

Attribute Change Run Process chain

Hi,
We have a attribute change run step in Process chain with "selective infoobjects".
But when it executes it runs attribute change run for all infoobjects apart from what i have mentioned in the variant.
Proof:
I had a snapshot of infoobject list in RSA1->Tools->Attribute change Run before executing process chain in which i saw info objects other than what i had in the variant.
I ran the process chain.
Again I saw the infoobject list RSA1->Tools->Attribute change Run and it was empty!!
Even though I mention some infoobject in process "Attribute change Run" It runs for all info objects irrespective of what I maintain in the variant.
This causes problem and creacting lock. If anyone ever observed this problem and resolved please let me know!!
Thanks
VJ

well here is the POC ,I have nw204s SP-12 .
Steps followed -
Monitor of change run - 3 infoobjects currently waiting for CR.
Built PC with Process type "Attribute Change" only ..no other process types barring "Start" which is imperative.
Included only 2 Infoobjects from the 3 aforementioned.
Scheduled as immediate and it executed CR for the 2 only,so my CR monitor shows now 1 pending for CR to be run,which is as expected.
So as per Proof of Concept sp-12 works with process type "Attribute Change"
You may wish to check your process chain again and in worst case raise an OSS to SAP.
Hope it Helps
Chetan
@CP..

Attribute Change Run Process

Dear All,
I have scheduled a Process Chain Run in BI7. All the Process has run successfully. But there is some problem with the Attribute Change Run.
At the start of the Process Chain all the colors of Process was green and gradually all the Successful process is turning from Green to Normal Color,but in the attribute process change run the Green color is not yet gone. So i am not getting any idea if my attribute change run has run successful or it is still running?
Plz help

Hi Anup,
What is the status of the attribute change run for your infoobject? whether it is successful?
If it successful then no issues. The attribute change run happened.
coming to process chain. there might be some problem in updating the process chain coloring.
Dont worry about the process chain coloring just chk whether the described job is completed or not.
orelse chck in SM37(background jobs) so that you can know whether the process event attribute change run happened or not?
Rgrds,
Ravi

Attrib Change Run

Hi All,
I have a Master Data object with both Attributes n Hierarchies. I am trying to build a process chain to load this MD Object.
Now I pulled the InfoPackage that is loading Attributes into the chain.
Do I need to run the Attrib. Change Run for this InfoObject before I schedule the InfoPackage for Hierarchies for the same InfoObject?
Or can I just run the Attrib. Change Run after loading both Attributes n Hierarchies?
Appreciate your help.
Thanks,
Pradeep

Kumar,
the guys are right. to pull the steps a little more apart lets put it this way once again:
from my experience the change run should not even affect the hierarchy upload as this goes to a different table. but this would be the 'cowboy' way.
you are doing best practice if you have the change run scheduled immediately after the attribute upload and then the hierarchies. this is the 'gentleman' way.
happy computing!
Cheers,
Harry

Change run for Compounding infoobjects

Similar Messages

Maybe you are looking for